Wastewater Treatment Processes Research Articles

Monitoring of enteropathogenic Gram-negative bacteria in wastewater treatment plants: a multimethod approach.

The wastewater treatment processes are associated with the emission of microbial aerosols, including enteropathogenic bacteria. Their presence in this work environment poses a real threat to the health of employees, both through the possibility of direct inhalation of the contaminated air and indirectly through the pollution of all types of surfaces with such bioaerosol particles. This study aimed to investigate the prevalence of enteropathogenic bacteria in the air, on surfaces, and in wastewater samples collected in four wastewater treatment plants (WWTPs). The effectiveness of conventional culture-biochemical, as well as spectrometric and molecular methods for the rapid detection of enteropathogenic bacteria at workstations related to particular stages of wastewater processing, was also evaluated. Bioaerosol, surface swab, and influent and effluent samples were collected from wastewater plants employing mechanical-biological treatment technologies. The air samples were collected using MAS-100 NT impactor placed at a height of 1.5m above the floor or ground, simulating aspiration from the human breathing zone. Surface samples were collected with sterile swabs from different surfaces (valves, handles, handrails, and coveyor belts) at workplaces. The raw influent and treated effluent wastewater samples were aseptically collected using sterile bottles. The identification of bacterial entheropathogens was simultaneously conducted using a culture-based method supplemented with biochemical (API) tests, mass-spectrometry (MALDI TOF MS), and molecular (multiplex real-time PCR) methods. This study confirmed the common presence of bacterial pathogens (including enteropathogenic and enterotoxigenic Escherichia coli, Salmonella spp., Campylobacter spp., and Yersinia enterocolitica) in all air, surface, and wastewater samples at studied workplaces. Higher concentrations of enteropathogenic bacteria were observed in the air and on surfaces at workplaces where treatment processes were not hermetized. The results of this study underline that identification of enteropathogenic bacteria in WWTPs is of great importance for the correct risk assessment at workplaces. From the analytical point of view, the control of enteropathogenic bacterial air and surface pollution using rapid multiplex-PCR method should be routinely performed as a part of hygienic quality assessment in WWTPs.

Unintended polyhalogenated carbazole production during advanced oxidation of coking wastewater

Polyhalogenated carbazoles (PHCZs) are emerging as dioxin-like global pollutants, yet their environmental origins are not fully understood. This study investigates the application of the Fenton process in coking wastewater treatment, focusing on its dual role in carbazole removal and unintended PHCZ formation. The common halide ions (Cl– and Br–) in coking wastewater, especially Br– ions, exerted a notable impact on carbazole removal. Particularly, the influence of Br– ions was more significant, not only enhancing carbazole removal but also shaping the congener composition of PHCZ formation. Elevated halide ion concentrations were associated with the heightened formation of higher halogenated carbazoles. The Fenton reagent dosage ratio was identified as a crucial factor affecting the congener composition of PHCZs and their toxic equivalency value. The coexisting organic substance (i.e., phenol) in coking wastewater was observed to inhibit PHCZ formation, likely through competitive reactions with carbazole. Intriguingly, ammonium (NH4+) facilitated the generation of higher and mixed halogenated carbazoles, possibly due to the generation of nitrogen-containing brominating agents with stronger bromination capacity. This study underscores the importance of a comprehensive assessment, considering both substrate removal and potential byproduct formation, when employing the Fenton process for saline wastewater treatment.

Development of an electrocoagulation method using alternating pulse current to treat wastewater generated by tanneries

ABSTRACT Direct current electrocoagulation has various drawbacks, including electrode passivation, heat creation from energy consumption, and high sludge formation. The restrictions limit its usage in tannery wastewater treatment. Therefore, alternating pulse current EC (APC-EC) was developed to solve these obstacles. The study was empirically examined, considering high-frequency (3,000–11,000 Hz), stirring speed (400–1,200 rpm), and reaction time (15–30 min). This research examined how factors affect chemical oxygen demand (COD) removal efficiency, turbidity from trivalent chromium (Cr+3), and energy consumption for perforated aluminum electrodes. The central composite design in the surface response design approach has improved various operational parameters in the APC-EC process for tannery wastewater treatment. The employment of mathematical and statistical methods resulted in optimal removal of COD, Cr+3, and turbidity while reducing energy usage. Using mathematical and statistical methods, we achieved maximum COD, Cr+3 ion, and turbidity reduction while reducing energy use. The investigation found that COD (70.3%), Cr+3 (89.56%), and turbidity (96%) were the most rapidly removed components at 11,000 Hz, 576 rpm, and 30 min. Surface response data explain high-frequency APC-EC dynamics.

The Enhanced Performance of NiCuOOH/NiCu(OH)2 Electrode Using Pre-Conversion Treatment for the Electrochemical Oxidation of Ammonia

Electrochemical oxidation of ammonia is an attractive process for wastewater treatment, hydrogen production, and ammonia fuel cells. However, the sluggish kinetics of the anode reaction has limited its applications, leading to a high demand for novel electrocatalysts. Herein, the electrode with the in situ growth of NiCu(OH)2 was partially transformed into the NiCuOOH phase by a pre-treatment using highly oxidative solutions. As revealed by SEM, XPS, and electrochemical analysis, such a strategy maintained the 3D structure, while inducing more active sites before the in situ generation of oxyhydroxide sites during the electrochemical reaction. The optimized NiCuOOH-1 sample exhibited the current density of 6.06 mA cm−2 at 0.5 V, which is 1.67 times higher than that of NiCu(OH)2 (3.63 mA cm−2). Moreover, the sample with a higher crystalline degree of the NiCuOOH phase exhibited lower performance, demonstrating the importance of a moderate treatment condition. In addition, the NiCuOOH-1 sample presented low selectivity (<20%) towards NO2− and stable activity during the long-term operation. The findings of this study would provide valuable insights into the development of transition metal electrocatalysts for ammonia oxidation.

Comparative study for the performance of pure artificial intelligence software sensor and self-organizing map assisted software sensor in predicting 5-day biochemical oxygen demand for Kauma Sewage Treatment Plant effluent in Malawi

Introduction: Modeling plays a crucial role in understanding wastewater treatment processes, yet conventional deterministic models face challenges due to complexity and uncertainty. Artificial intelligence offers an alternative, requiring no prior system knowledge. This study tested the reliability of the Adaptive Fuzzy Inference System (ANFIS), an artificial intelligence algorithm that integrates both neural networks and fuzzy logic principles, to predict effluent Biochemical Oxygen Demand. An important indicator of organic pollution in wastewater.Materials and Methods: The ANFIS models were developed and validated with historical wastewater quality data for the Kauma Sewage Treatment Plant located in Lilongwe City, Malawi. A Self Organizing Map (SOM) was applied to extract features of the raw data to enhance the performance of ANFIS. Cost-effective, quicker, and easier-to-measure variables were selected as possible predictors while using their respective correlations with effluent. Influents’ temperature, pH, dissolved oxygen, and effluent chemical oxygen demand were among the model predictors.Results and Discussions: The comparative results demonstrated that for the same model structure, the ANFIS model achieved correlation coefficients (R) of 0.92, 0.90, and 0.81 during training, testing, and validation respectively, whereas the SOM-assisted ANFIS Model achieved R Values of 0.99, 0.87 and 0.94. Overall, despite the slight decrease in R-value during the testing stage, the SOM- assisted ANFIS model outperformed the traditional ANFIS model in terms of predictive capability. A graphic user interface was developed to improve user interaction and friendliness of the developed model. Integration of the developed model with supervisory control and data acquisition system is recommended. The study also recommends widening the application of the developed model, by retraining it with data from other wastewater treatment facilities and rivers in Malawi.

Technical and financial feasibility of a chemicals recovery and energy and water production from a dairy wastewater treatment plant

Due to the high volume of wastewater produced from dairy factories, it is necessary to integrate a water recovery process with the treatment plant. Today, bipolar membrane electrodialysis units (BMEUs) are increasingly developed for wastewater treatment and reutilizing. This article aims to develop and evaluate (technical and cost analyses) a combined BMEU/batch reverse osmosis unit (BROU) process for the recovery of chemicals and water from the dairy wastewater plant. The combined BROU/BMEU process is able to simultaneously produce water and strong base-acid, and reduce power consumption due to the injection of concentrated feed flow into the BMEU. A comprehensive comparative analysis on the performances of two combined and stand-alone BMEU configurations are developed. The proposed combined technology for dairy factory wastewater treatment is designed on a new structure and configuration that can address superior cost analysis compared to similar technologies. Further, the optimal values of permeate flux and current density as two vital and influencing parameters on the performance of the studied dairy wastewater treatment process were calculated and discussed. From the outcomes, the total cost of production in the combined configuration has been reduced by approximately 26% compared to the stand-alone configuration. Increasing the feed concentration rate using the batch reverse osmosis process for the dairy wastewater treatment process can be an ideal solution from an economic point of view. Moreover, point (current density, feed concentration rate, total unit cost) = 328.9,7,14.37\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\left(328.9, 7, 14.37\\right)$$\\end{document} can be considered as an optimal point for the economic performance of the studied wastewater treatment process.

Towards good modelling practice for parallel hybrid models for wastewater treatment processes

Towards good modelling practice for parallel hybrid models for wastewater treatment processes

Microbiome structure and function in parallel full-scale aerobic granular sludge and activated sludge processes

Aerobic granular sludge (AGS) and conventional activated sludge (CAS) are two different biological wastewater treatment processes. AGS consists of self-immobilised microorganisms that are transformed into spherical biofilms, whereas CAS has floccular sludge of lower density. In this study, we investigated the treatment performance and microbiome dynamics of two full-scale AGS reactors and a parallel CAS system at a municipal WWTP in Sweden. Both systems produced low effluent concentrations, with some fluctuations in phosphate and nitrate mainly due to variations in organic substrate availability. The microbial diversity was slightly higher in the AGS, with different dynamics in the microbiome over time. Seasonal periodicity was observed in both sludge types, with a larger shift in the CAS microbiome compared to the AGS. Groups important for reactor function, such as ammonia-oxidising bacteria (AOB), nitrite-oxidising bacteria (NOB), polyphosphate-accumulating organisms (PAOs) and glycogen-accumulating organisms (GAOs), followed similar trends in both systems, with higher relative abundances of PAOs and GAOs in the AGS. However, microbial composition and dynamics differed between the two systems at the genus level. For instance, among PAOs, Tetrasphaera was more prevalent in the AGS, while Dechloromonas was more common in the CAS. Among NOB, Ca. Nitrotoga had a higher relative abundance in the AGS, while Nitrospira was the main nitrifier in the CAS. Furthermore, network analysis revealed the clustering of the various genera within the guilds to modules with different temporal patterns, suggesting functional redundancy in both AGS and CAS.Key points• Microbial community succession in parallel full-scale aerobic granular sludge (AGS) and conventional activated sludge (CAS) processes.• Higher periodicity in microbial community structure in CAS compared to in AGS.• Similar functional groups between AGS and CAS but different composition and dynamics at genus level.Graphical abstract

Enhanced generation of aromatic-enriched bio-oil from sewage sludge pyrolysis using zeolite-based catalysts under H2-rich conditions

Sewage sludge is solid waste resulting from wastewater treatment processes, and its improper management adversely affects the environment and human health. This study aims to convert sewage sludge into valuable aromatics, including benzene, toluene, ethylbenzene, and xylenes, or BTEX, via the catalytic pyrolysis using mono- and bimetal-modified protonated Zeolite Socony Mobil–5, or HZSM-5, catalysts under nitrogen, methane and methane decomposition conditions. In the methane medium, HZSM-5 yielded more BTEX (20.91 wt%) compared to those obtained using protonated Y zeolite (HY) (17.24 wt%) and protonated beta zeolite (Hβ) (11.70 wt%) owing to its proper acidity, higher shape selectivity, and higher methane activation. When HZSM-5 is used, the BTEX yield increased considerably in the methane decomposition environment (27 wt%), 1.29 and 1.46 times higher than those produced under methane and nitrogen, respectively. This increase is attributed to the dual effects of the surplus in situ hydrogen (H2) and direct involvement of methane, which resulted in accelerated hydrocracking, hydrodeoxygenation, and co-aromatization reactions. Under methane decomposition conditions, the use of the Ni/HZSM-5, Mo/HZSM-5, and Ni-Mo/HZSM-5 catalysts led to 1.23-, 1.30-, and 1.66-fold increases in BTEX production, respectively, than that of the parent HZSM-5, owing to the dual effects of acidity enhanced by the newly formed Lewis acid sites, increased oxygen vacancies, and improved physical properties of the catalysts. Hence, the catalytic pyrolysis of sewage sludge using mono- and bimetal-modified HZSM-5 catalysts in a H2-rich environment proposed in this study is expected to be an efficient and sustainable method for converting undesirable materials into valuable biofuels.

Effluent quality improvement in sequencing batch reactor-based wastewater treatment processes using advanced control strategies

ABSTRACT The treatment of wastewater is highly challenging due to large fluctuations in flowrates, pollutants, and variable influent water compositions. A sequencing batch reactor (SBR) and modified SBR cycle-step-feed process (SSBR) configuration are studied in this work to effectively treat municipal wastewater while simultaneously removing nitrogen and phosphorus. To control the amount of dissolved oxygen in an SBR, three axiomatic control strategies (proportional integral (PI), fractional proportional integral (FPI), and fuzzy logic controllers) are presented. A biological process and relevant control algorithm has been designed using real-time plant data with the models of SBR and SSBR using the ASM2d mathematical model. On comparison, FPI showed a significant reduction in nutrient levels and added an improvement in effluent quality. The overall effluent quality is improved by 0.86% in FPI in comparison with PI controller. The SSBR, which was improved by precisely optimizing nutrient supply and aeration, establishes a delicate equilibrium. This refined method reduces oxygen requirements while reliably sustaining important biological functions. Focusing solely on the FPI controller's performance in terms of total air volume consumption, the step-feed SBR mechanism achieves an excellent 11.04% reduction in consumption.

Bio2Py: An API for integrating Python with BioWin for enhanced data acquisition in wastewater treatment simulations

Commercial simulators for modeling wastewater treatment processes (WWTPs), such as BioWin, play a crucial role for optimizing the design, operation, and control of treatment facilities. These simulators offer fast and user-friendly interfaces and can be employed to enhance the efficiency of wastewater treatment plants. However, a notable limitation of BioWin and similar platforms is the lack of direct integration with Python®, a programming language renowned for its versatility and extensive data analysis and machine learning libraries. Bridging this gap constitutes an opportunity to significantly improve the simulation process by leveraging Python's capabilities. The Python package Bio2Py (BioWin to Python) is presented as a compelling solution, reconciling BioWin's specialized functionality and Python's automation and data processing strengths. By utilizing Python's PyAutoGUI package, Bio2Py automates various aspects of the simulation process, such as loading influent data, running simulations, and saving simulation results without manual intervention. The integration of BioWin with Python not only speeds up the workflow by automating repetitive tasks but also opens new possibilities, such as parameter calibration for specific wastewaters and using BioWin as a data generator for machine learning applications. This brief communication presents the Bio2Py API, illustrating its use and applicability through a simple implementation example. Bio2Py's ability to automate and optimize various aspects of wastewater treatment process simulation, including data acquisition, and its potential use for process variable optimization and parameter tuning, positions it as a valuable tool for engineers and researchers who work in this field.

Molecular Simulation Studies of Pharmaceutical Pollutant Removal (Rosuvastatin and Simvastatin) Using Novel Modified-MOF Nanostructures (UIO-66, UIO-66/Chitosan, and UIO-66/Oxidized Chitosan).

The ubiquitous presence of pharmaceutical pollutants in the environment significantly threatens human health and aquatic ecosystems. Conventional wastewater treatment processes often fall short of effectively removing these emerging contaminants. Therefore, the development of high-performance adsorbents is crucial for environmental remediation. This research utilizes molecular simulation to explore the potential of novel modified metal-organic frameworks (MOFs) in pharmaceutical pollutant removal, paving the way for the design of efficient wastewater treatment strategies. Utilizing UIO-66, a robust MOF, as the base material, we developed UIO-66 functionalized with chitosan (CHI) and oxidized chitosan (OCHI). These modified MOFs' physical and chemical properties were first investigated through various characterization techniques. Subsequently, molecular dynamics simulation (MDS) and Monte Carlo simulation (MCS) were employed to elucidate the adsorption mechanisms of rosuvastatin (ROSU) and simvastatin (SIMV), two prevalent pharmaceutical pollutants, onto these nanostructures. MCS calculations demonstrated a significant enhancement in the adsorption energy by incorporating CHI and OCHI into UIO-66. This increased ROSU from -14,522 to -16,459 kcal/mol and SIMV from -17,652 to -21,207 kcal/mol. Moreover, MDS reveals ROSU rejection rates in neat UIO-66 to be at 40%, rising to 60 and 70% with CHI and OCHI. Accumulation rates increase from 4 Å in UIO-66 to 6 and 9 Å in UIO-CHI and UIO-OCHI. Concentration analysis shows SIMV rejection surges from 50 to 90%, with accumulation rates increasing from 6 to 11 Å with CHI and OCHI in UIO-66. Functionalizing UIO-66 with CHI and OCHI significantly enhanced the adsorption capacity and selectivity for ROSU and SIMV. Abundant hydroxyl and amino groups facilitated strong interactions, improving performance over that of unmodified UIO-66. Surface functionalization plays a vital role in customizing the MOFs for pharmaceutical pollutant removal. These insights guide next-gen adsorbent development, offering high efficiency and selectivity for wastewater treatment.

Novel nanostructure approach for antibiotic decomposition in a spinning disc photocatalytic reactor

Conventional wastewater treatment processes are often unable to remove antibiotics with resistant compounds and low biological degradation. The need for advanced and sustainable technologies to remove antibiotics from water sources seems essential. In this regard, the effectiveness of a spinning disc photocatalytic reactor (SDPR) equipped with a visible light-activated Fe3O4@SiO2-NH2@CuO/ZnO core–shell (FSNCZ CS) thin film photocatalyst was investigated for the decomposition of amoxicillin (AMX), a representative antibiotic. Various characterization techniques, such as TEM, FESEM, EDX, AFM, XRD, and UV–Vis-DRS, were employed to study the surface morphology, optoelectronic properties, and nanostructure of the FSNCZ CS. Key operating parameters such as irradiation time, pH, initial AMX concentration, rotational speed, and solution flow rate were fine-tuned for optimization. The results indicated that the highest AMX decomposition (98.7%) was attained under optimal conditions of 60 min of irradiation time, a rotational speed of 350 rpm, a solution flow rate of 0.9 L/min, pH of 5, and an initial AMX concentration of 20 mg/L. Moreover, during the 60 min irradiation time, more than 69.95% of chemical oxygen demand and 61.2% of total organic carbon were removed. After the photocatalytic decomposition of AMX, there is a substantial increase in the average oxidation state and carbon oxidation state in SDPR from 1.33 to 1.94 and 3.2, respectively. Active species tests confirmed that ·OH and ·O2− played a dominant role in AMX decomposition. The developed SDPR, which incorporates a reusable and robust FSNCZ CS photocatalyst, demonstrates promising potential for the decomposition of organic compounds.

An attempt to augment performance of machine learning models in a pilot-scale urban wastewater treatment system

The challenge we face is striking a balance between ensuring the standards for wastewater treatment processes and minimizing energy consumption. As such, accurate predictive models become critical. With machine learning algorithms having the ability to discern relationships between inputs and outputs, broad interest has been shown in their applications in wastewater treatment. A key research focus is on effectively adjusting these generic machine learning algorithms to adapt to frequent fluctuations of water quality, inflow volume, and environmental variations. This study developed a Nonlinear Autoregressive neural network (NARX) model having an adaptive real-time updating module to predict the ammonium concentration in the treated effluent. The model has exhibited high predictive accuracy on the testing data, achieving an R2 value of 0.997. By incorporating an adaptive real-time updating module, the model's capability to predict effluent ammonium concentration on novel data sets has been significantly improved, with the R2 value for these predictions increasing from an initial 0.918 to a more refined range of 0.966 to 0.984. Our findings confirm that integrating real-time updating capabilities with machine learning algorithms substantially improves the stability and predictive performance of the models. These outcomes will prompt a broader integration of artificial intelligence in the domain of environmental engineering, which shall foster the implementation of more accurate and eco-friendly wastewater treatment strategies.

High capacities of carbon capture and photosynthesis of a novel organic carbon-fixing microalgae in municipal wastewater: From mutagenesis, screening, ability evaluation to mechanism analysis

The development of wastewater treatment processes capable of reducing and fixing carbon is currently a hot topic in the wastewater treatment field. Microalgae possess a natural carbon-fixing advantage, and microalgae that can symbiotically coexist with indigenous bacteria in actual wastewater attract more significant attention. Ultraviolet (UV) mutagenesis and dissolved organic carbon (DOC) acclimation were applied to strengthen the carbon-fixing performance of microalgae in this study. The mechanisms associated with microalgal water purification ability, gene regulation at the molecular level and photosynthetic potential under different trophic modes resulting from carbon fixation and transformation were disclosed. The superior performance of Chlorella sp. MHQ2 was eventually screened out among a large number of mutants generated from 3 wild-type Chlorella strains. Results indicated that the dry cell weight of the optimal species Chlorella sp. HQ mutant MHQ2 was 1.91 times that of the wild strain in the pure algal system, more carbon from municipal wastewater (MW) were transferred to the microalgae and re-entered into the biological cycle through resource utilization. In addition, COD, NH3-N and TP removal efficiencies of MW by Chlorella sp. MHQ2 were found to increase to 95.8% (1.1-times), 96.4% (1.4-times), and 92.9% (1.2-times), respectively, under the extra DOC supply and the assistance of indigenous bacteria in the MW. In the transcriptome analysis of the logarithmic phase, the glycolytic pathway was inhibited, and the pentose phosphate pathway was mainly carried out for microalgal life activities, further promoting efficient energy utilization. Upon analysis of carbon capture capacity and photosynthetic potential in trophic mode, the addition of NaHCO3 increased the photosynthetic rate of Chlorella sp. MHQ2 in mixotrophy whereas it was attenuated in autotrophy. This study could provide a new perspective for the study of resource utilization and microalgae carbon- fixing mechanisms in the actual wastewater treatment process.

Effectiveness of Carica Papaya Dry Seed as Natural Coagulants in Wastewater Treatment Process

This study aims to assess the efficacy of Carica papaya-dried seeds as a natural coagulant in the wastewater treatment process. Using natural coagulants in water treatment provides a safer and more sustainable method. Insufficient research in this field hinders a thorough comprehension of the ideal circumstances, dosage, and potential impacts of Carica papaya dry seed coagulation on pollutant elimination in wastewater. Therefore, the investigation of the extraction procedure for coagulants derived from dried Carica papaya seeds is essential to establish a reliable and efficient method suitable for use in wastewater treatment facilities. The number of experiments were conducted to accomplish the objective of this study. The experiment utilised textile effluent from an industrial area in Parit Raja, Johor as the wastewater sample. The Carica papaya seeds were ground into a powder and then mixed with Sodium Chloride (NaCl) and distilled water to create a coagulant solution. COD, turbidity, pH, and settling depth were measured to assess the effectiveness of Carica papaya seeds in treating the effluent sample. At a Carica papaya seed coagulant dosage of 2.0 mL with a NaCl concentration of 1.5 M, the optimal COD reduction and turbidity removal efficacy were at 20.95 % and 23.00 %, respectively. This study shows that among 5 different concentration solvent, 1.5M NaCl is most optimum concentration condition demonstrated. Moreover, the research represents the significant potential of Carica papaya seed powder as a natural coagulant for treating wastewater that contains textile colouring agents. In conclusion, the research demonstrated that dried Carica papaya seeds possess the potential to serve as a natural coagulant in wastewater treatment procedures, thereby presenting a safer and more ecologically sustainable alternative. This study offers insights into the ideal conditions for utilising dried Carica papaya seeds as a natural coagulant for treating wastewater that contains textile colouring agents.

Effects of salinity on glycerol conversion and biological phosphorus removal by aerobic granular sludge

Industrial wastewater often has high levels of salt, either due to seawater or e.g. sodium chloride (NaCl) usage in the processing. Previous work indicated that aerobic granular sludge (AGS) is differently affected by seawater or saline water at similar osmotic strength. Here we investigate in more detail the impact of NaCl concentrations and seawater on the granulation and conversion processes for AGS wastewater treatment. Glycerol was used as the carbon source since it is regularly present in industrial wastewaters, and to allow the evaluation of microbial interactions that better reflect real conditions. Long-term experiments were performed to evaluate and compare the effect of salinity on granulation, anaerobic conversions, phosphate removal, and the microbial community. Smooth and stable granules as well as enhanced biological phosphorus removal (EBPR) were achieved up to 20 g/L NaCl or when using seawater. However, at NaCl levels comparable to seawater strength (30 g/L) incomplete anaerobic glycerol uptake and aerobic phosphate uptake were observed, the effluent turbidity increased, and filamentous granules began to appear. The latter is likely due to the direct aerobic growth on the leftover substrate after the anaerobic feeding period. In all reactor conditions, except the reactor with 30 g/L NaCl, Ca. Accumulibacter was the dominant microorganism. In the reactor with 30 g/L NaCl, the relative abundance of Ca. Accumulibacter decreased to ≤1 % and an increase in the genus Zoogloea was observed. Throughout all reactor conditions, Tessaracoccus and Micropruina, both actinobacteria, were present which were likely responsible for the anaerobic conversion of glycerol into volatile fatty acids. None of the glycerol metabolizing proteins were detected in Ca. Accumulibacter which supports previous findings that glycerol can not be directly utilized by Ca. Accumulibacter. The proteome profile of the dominant taxa was analysed and the results are further discussed. The exposure of salt-adapted biomass to hypo-osmotic conditions led to significant trehalose and PO43−-P release which can be related to the osmoregulation of the cells. Overall, this study provides insights into the effect of salt on the operation and stability of the EBPR and AGS processes. The findings suggest that maintaining a balanced cation ratio is likely to be more important for the operational stability of EBPR and AGS systems than absolute salt concentrations.

Exposure of polyethylene microplastics affects sulfur migration and transformation in anaerobic system

Polyethylene (PE) microplastic, which is detected in various environmental media worldwide, also inevitably enters wastewater treatment plants, which may have an impact on anaerobic processes in wastewater treatment. In this work, the effect of PE microplastics on anaerobic sulfur transformation was explored. Experimental results showed that PE microplastics addition at 0.1%− 0.5% w/w promoted H2S production by 14.8%−27.4%. PE microplastics enhanced the release of soluble organic sulfur and inorganic sulfate, and promoted the bioprocesses of organosulfur compounds hydrolysis and sulfate reduction. Mechanism analysis showed that PE microplastics increased the content of electroactive components (e.g., protein and humic acids) contained in extracellular polymeric substances (EPS). In particular, PE microplastics increased the proportion and the dipole moment of α-helix, an important component involved in electron transfer contained in extracelluar protein, which provided more electron transfer sites and promoted the α-helix mediated electron transfer. These enhanced the direct electron transfer ability of EPSs, which might explain why PE microplastics facilitated the bioprocesses of organosulfur compounds hydrolysis and sulfate reduction. Correspondingly, metagenomic analysis revealed that PE microplastics increased the relative abundance of S2- producers (e.g., Desulfobacula and Desulfonema) and the relative abundance of functional genes involved in anaerobic sulfur transformation (e.g., PepD and cysD), which were beneficial to H2S production in anaerobic system.

EVALUATION OF THE CARBON FOOTPRINT IN THE TREATMENT OF URBAN WASTEWATER IN THE CANARY ISLANDS (SPAIN)

ABSTRACT: Wastewater treatment plants play an important role within the urban water cycle to prevent the natural water environment and human health from being negatively affected by human activities. However, wastewater treatment processes, such as effluent discharge and indirect emissions resulting from energy or chemical production, also negatively affect the environment. Footprints have been used to track human influence on the environment in different areas of interest and have been applied to assess the sustainability of wastewater treatment plants. In this article, a comprehensive review of footprint assessment was investigated to evaluate the wastewater treatment process in wastewater treatment plants. The review showed that carbon footprinting was used to assess the sustainability of WWTPs, and that other footprint assessment applications (such as nitrogen and phosphorus footprinting) were also introduced to assess eutrophication of water bodies. To promote the application of footprint assessment, this article regulates the study objectives, frameworks, system boundaries, data processing methods, and the resulting interpretation process. The pros and cons of the footprint assessments were discussed and investigated in detail, examining the CO2 production on each island of the Canary archipelago, and several suggestions were proposed to improve the footprint assessments. Analysis of footprint assessments at different wastewater treatment plants revealed that wastewater treatment technologies and scales had a significant impact on footprints. Furthermore, research hotspots identified using a keyword network diagram showed that the water-carbon-energy nexus was a promising direction for future studies. The purpose of the study is to improve the reduction of the carbon footprint both at the level of direct and indirect emissions factors using new tools and methodologies. Key Words: Footprint; Waste water; Canary Islands

Entry pathways determined the effects of MPs on sludge anaerobic digestion system: The views of methane production and antibiotic resistance genes fates

Sludge is one of the primary reservoirs of microplastics (MPs), and the effects of MPs on subsequent sludge treatment raised attention. Given the entry pathways, MPs would exhibit different properties, but the entry pathway-dependent effect of MPs on sludge treatment performance and the fates of antibiotic resistance genes (ARGs), another high-risk emerging contaminant, were seldom documented. Herein, MPs with two predominant entry pathways, including wastewater-derived (WW-derived) and anaerobic digestion-introduced (AD-introduced), were used to investigate the effects on AD performance and ARGs abundances. The results indicated that WW-derived MPs, namely the MPs accumulated in sludge during the wastewater treatment process, exhibited significant inhibition on methane production by 22.8%–71.6%, while the AD-introduced MPs, being introduced in the sludge AD process, slightly increased the methane yield by 4.7%–17.1%. Meanwhile, MPs were responsible for promoting transmission of target ARGs, and polyethylene terephthalate MPs (PET-MPs) showed a greater promotion effect (0.0154–0.0936) than polyamide MPs (PA-MPs) (0.0013–0.0724). Compared to size, entry pathways and types played more vital roles on MPs influences. Investigation on mechanisms based on microbial community structure revealed characteristics (aging degree and types) of MPs determined the differences of AD performance and ARGs fates. WW-derived MPs with longer aging period and higher aging degree would release toxics and decrease the activities of microorganisms, resulting in the negative impact on AD performance. However, AD-introduced MPs with short aging period exhibited marginal impacts on AD performance. Furthermore, the co-occurrent network analysis suggested that the variations of potential host bacteria induced by MPs with different types and aging degree attributed to the dissemination of ARGs. Distinctively from most previous studies, the MPs with different sizes did not show remarkable effects on AD performance and ARGs fates. Our findings benefited the understanding of realistic environmental behavior and effect of MPs with different sources.