Wastewater Treatment Plant Influent Research Articles

Occurrence, fate, and ecological risk of PAEs, PFASs, antibiotics in industrial, urban and rural WWTPs in Shaanxi Province, China

The wastewater treatment plants (WWTPs) were considered as a hub of transit from human activities as a source to the aquatic ecosystems as a sink of emerging contaminants (ECs). This study investigated the fate of phthalate esters (PAEs), per- and polyfluoroalkyl substances (PFASs) and antibiotics in the influent and effluent of WWTPs in industrial, urban and rural in Shaanxi province (China). The first most abundant monomer of these three types of ECs were the same in industrial, urban and rural WWTPs. The composition of PAEs in the influent of urban and rural WWTPs were quite different from that of industrial WWTPs. The removal efficiency of PAEs and PFASs in urban WWTPs were higher than those in rural and industrial WWTPs. The annual mass load of PFASs in rural WWTPs was lower than that in industrial and urban WWTPs. The risk quotient (RQ) of PAEs was high, with most of them exceeding 1. While the RQ of PFASs was low, exceeding 0.1 only in some industrial WWTPs. The frequency of high risk of total antibiotics in urban and rural WWTPs was higher than that in industrial WWTPs. This study provided field survey data and guidance to strengthen the management of ECs in the region.

The effect of the modifiable areal unit problem (MAUP) on spatial aggregation of COVID-19 wastewater surveillance data

Large wastewater-based epidemiology (WBE) projects often have wide coverage and multiple sampling sites, necessitating spatial aggregation for data reporting and interpretation. However, the outcome may be impacted by a type of statistical bias called the modifiable areal unit problem (MAUP). In this study, we examined the presence and extent of the MAUP scaling effect on a New York State COVID-19 wastewater surveillance project. Specifically, we investigated three metrics: 1) the difference in wastewater SARS-CoV-2 concentrations between sampling at city-level site (i.e., city's primary wastewater treatment plant influent stream) and at upstream sampling sites; 2) the correlation between WBE data and clinical indicators at the WWTP-level and the more aggregated county-level; and 3) the proportion of population affected by misalignment of COVID-19 community risk levels at different spatial scales. The results showed that the MAUP can have a negative impact on risk perception by masking regions with high wastewater viral load or COVID-19 community risk level. On the other hand, the MAUP improved the correlation between wastewater surveillance and clinical measures by an average of 26.02 %. This is the first study to investigate the MAUP in the context of WBE and may encourage future WBE projects to consider the implications of the MAUP when interpreting and reporting spatial data, ultimately leading to better data representativeness and accuracy.

Integrated electrocoagulation-flotation process: a comparative study for employing Fe/Al electrodes in Tanta wastewater treatment plant influent

Integrated electrocoagulation-flotation process: a comparative study for employing Fe/Al electrodes in Tanta wastewater treatment plant influent

Enhanced industrial wastewater monitoring: method development for non-target screening of highly polar substances using ZIC-HILIC-HRMS.

Non-target screening (NTS) plays a major role in the monitoring and management of water bodies. While the NTS of moderate to non-polar substances is well-established, the screening of highly polar chemicals remains challenging. In this study, a robust separation method for highly polar substances using zwitterionic hydrophilic interaction liquid chromatography coupled with high-resolution mass spectrometry (ZIC-HILIC-HRMS) was developed. This method was specifically designed for the NTS of industrial wastewater, with the objective of capturing a wide range of polar contaminants in each acquisition run. Method validation included assessing key parameters such as repeatability, reproducibility, linearity, and limit of detection (LOD). For repeatability and reproducibility, the average %RSD of intensity and retention time across all substances in different matrices-solvent, influent, and effluent-remained below 6% and 1%, respectively (n = 10). The method demonstrated good linearity (R2 > 0.99) for 75% of the substances, while LODs varied between 0.1 and 40µg/L depending on the compound tested. The method was then applied for NTS analysis of untreated wastewater at various locations within a chemical industrial park. Additionally, the overall influent and effluent of an industrial wastewater treatment plant (WWTP) were monitored over a 10-day period. Principal component analysis (PCA) was performed to interpret the data, identifying irregularities in the wastewater content. Moreover, the method demonstrated the WWTP's ability to achieve an average removal efficiency of approximately 90% for this category of substances in this period, while also detecting their degradation products in the effluent. Finally, the method was successfully integrated into the daily monitoring routine of the WWTP, ensuring continuous surveillance and improved management of wastewater treatment processes.

Investigating illicit drug hotspots and daily variations using sewer-network wastewater analysis

Previous wastewater-based epidemiology (WBE) research on illicit drug use has predominantly focused on wastewater treatment plant (WWTP) influents, but information on sewer-network wastewater is very limited. This study represents a pioneering small-scale WBE investigation based on the analysis of sewer-network wastewater samples from different sewer manholes in suburban (Tamsui region) and urban areas (Zhongshan and Wanhua regions) and a comparison of the results with those obtained from corresponding WWTP influents. Among sixteen illicit drugs, methamphetamine exhibited the highest concentration in sewer-network wastewater across both areas. Suburban–urban variations were observed, with more types of illicit drugs detected in the suburban area. Back-calculation indicated that methamphetamine and ketamine were the most-consumed illicit drugs in both sewer-network wastewaters and WWTP influents. Similar types of illicit drugs were detected in the sewer-network wastewaters and WWTP influents, indicating the representativeness of WWTP influents in assessing regional illicit drug abuse. Nevertheless, the sewer-network wastewater results offered additional information making it possible to pinpoint potential hotspots of illicit drug and identify peak usage periods throughout the day, in contrast to the WWTP influent results. In the non-suspected suburban area of Tamsui, high potential hotspots of methamphetamine (sampling points 3 and 6) and ketamine (sampling points 1 and 8) were identified. Although the Zhongshan and Wanhua regions were chosen as suspected hotspots of illicit drug abuse, more severe illicit drug use was observed in Wanhua. Moreover, a trend toward higher illicit drug use from early morning to morning was observed. Despite sampling challenges and higher costs, small-scale WBE via sewer-network wastewater analysis provides superior identification of drug abuse hotspots and peak usage periods. Therefore, this study provides valuable insights for law enforcement and can help prevent and combat illicit drug abuse by targeting potential hotspots and understanding daily illicit drug use dynamics.

City-scale impacts of PFAS from normal and elevated temperature landfill leachates on wastewater treatment plant influent

The influence of elevated temperatures on PFAS leaching in municipal solid waste (MSW) landfills has not been well characterized in the published scientific literature. This study systematically examined the compositions and concentrations of per- and polyfluoroalkyl substances (PFAS) and precursors content in both normal temperature landfill and elevated temperature landfill (ETLF) leachates and compared to a municipal wastewater and to a WWTP influent with and without introduced leachates. The characterization of the samples involved the analysis of 71 PFAS target compounds before and after applying the total oxidizable precursor (TOP) assay, along with measuring fluorotelomer alcohols (FTOHs) and adsorbable organofluorine (AOF) levels. Summed PFAS concentrations in leachates were driven largely by fluorotelomer carboxylic acids (FTCAs), short-chain and ultrashort-chain perfluorinated carboxylic acids and sulfonic acids. Summed PFAS concentrations in ETLF leachate were significantly higher than in normal leachate for precursors and terminal PFAS products. TOP assay data demonstrated that ETLF leachate contained significantly higher concentrations of oxidizable PFAS precursors than normal leachate. PFAS profiles in leachates were distinct from municipal wastewater and from WWTP influent, suggesting diverse PFAS inputs to the WWTP. The presence of unknown precursors revealed by the TOP assay and AOF analyses highlights the complexity of PFAS sources impacting sewer networks, warranting further study to better characterize PFAS inputs to the WWTP on a city-wide scale.

Metagenomic insights into plasmid-mediated antimicrobial resistance in poultry slaughterhouse wastewater: antibiotics occurrence and genetic markers.

Slaughterhouse wastewater represents important convergence and concentration points for antimicrobial residues, bacteria, and antibiotic resistance genes (ARG), which can promote antimicrobial resistance propagation in different environmental compartments. This study reports the assessment of the metaplasmidome-associated resistome in poultry slaughterhouse wastewater treated by biological processes, employing metagenomic sequencing. Antimicrobial residues from a wastewater treatment plant (WWTP) that treats poultry slaughterhouse influents and effluents were investigated through high-performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS). Residues from the macrolide, sulfonamide, and fluoroquinolone classes were detected, the latter two persisting after the wastewater treatment. The genetic markers 16S rRNA rrs (bacterial community) and uidA (Escherichia coli) were investigated by RT-qPCR and the sul1 and int1 genes by qPCR. After treatment, the 16S rRNA rrs, uidA, sul1, and int1 markers exhibited reductions of 0.67, 1.07, 1.28, and 0.79 genes copies, respectively, with no statistical significance (p > 0.05). The plasmidome-focused metagenomics sequences (MiSeq platform (Illumina®)) revealed more than 100 ARG in the WWTP influent, which can potentially confer resistance to 14 pharmacological classes relevant in the human and veterinary clinical contexts, in which the qnr gene (resistance to fluoroquinolones) was the most prevalent. Only 7.8% of ARG were reduced after wastewater treatment, and the remaining 92.2% were associated with an increase in the prevalence of ARG linked to multidrug efflux pumps, substrate-specific for certain classes of antibiotics, or broad resistance to multiple medications. These data demonstrate that wastewater from poultry slaughterhouses plays a crucial role as an ARG reservoir and in the spread of AMR into the environment.

Microplastics and per- and polyfluoroalkyl substances (PFAS) in landfill-wastewater treatment systems: A field study

Landfills and wastewater treatment plants (WWTP) are point sources for many emerging contaminants, including microplastics and per- and polyfluoroalkyl substances (PFAS). Previous studies have estimated the abundance and transport of microplastics and PFAS separately in landfills and WWTPs. In addition, previous studies typically report concentrations of microplastics as particle count/L or count/g sediment, which do not provide the information needed to calculate mass balances. We measured microplastics and PFAS in four landfill-WWTP systems in Illinois, USA, and quantified mass of both contaminants in landfill leachate, WWTP influent, effluent, and biosolids. Microplastic concentrations in WWTP influent were similar in magnitude to landfill leachates, in the order of 102 μg plastic/L (parts-per-billion). In contrast, PFAS concentrations were higher in leachates (parts-per-billion range) than WWTP influent (parts-per-trillion range). After treatment, both contaminants had lower concentrations in WWTP effluent, although were abundant in biosolids. We concluded that WWTPs reduce PFAS and microplastics, lowering concentrations in the effluent that is discharged to nearby surface waters. However, partitioning of both contaminants to biosolids may reintroduce them as pollutants when biosolids are landfilled or used as fertilizer.

Effects of Nonylphenol and Octylphenol on Wastewater Discharge Facilities in Northern Gyeonggi Province

This study examines the emission characteristics of nonylphenol (NP) and octylphenol (OP) in the discharged water of Northern Gyeonggi Province, South Korea, where the textile industry predominates. We evaluated 104 individual wastewater discharge facilities, six public wastewater treatment plants (WWTPs), and the Shincheon River. Our findings reveal that NP and OP concentrations were notably high in the textile industry, with median levels of 0.53 µg/L and 0.43 µg/L, respectively, in individual wastewater discharge facilities. Furthermore, monitoring NP and OP levels in the influent and effluent of WWTPs and river water demonstrated that WWTP effluent has a remarkable impact on NP and OP concentrations in the river. The removal rates of NP and OP in WWTPs averaged 69.6% and 41.8%, respectively, and these rates tended to increase with higher temperatures and influent concentrations. The average concentrations in the Shincheon River were 0.31 µg/L for NP and 0.45 µg/L for OP, slightly exceeding EU standards. It is essential to closely monitor NP and OP levels to protect aquatic ecosystems.

A systematic review on the occurrence and removal of microplastics during municipal wastewater treatment plants

This study uses a systematic review of Scopus, Web of Science, and ScienceDirect databases to investigate the removal rate of microplastics (MPs) at various stages of municipal wastewater treatment plants (WWTPs). In this context, 25 articles were included, which investigated 54 WWTPs. Results showed that the overall removal efficacy of MPs in studied WWTPs is about 88.1 (± 18.8) percent. The contribution of preliminary, primary, secondary, tertiary, and disinfection treatment in the removal of entry MPs are 37.4% (± 24), 62.7% (± 20.8), 63.7% (± 24.8), 62.8% (± 29.5), and 12.5% (± 15.7) (mean (± SD)), respectively. The critical aspects about MPs occurrence in WWTPs influent were summarized and on average 2267.2 (± 5376.4) MPs particles per liter (P/L) were present with a considerable wide range of 0.28 to 31400 P/L. In the next section, details about frequent shape (i.e., spherical (beads, pellets, granules), lines (filaments, fibers), films, fragments, and foams) of MPs in influent and effluent of included WWTPs and their removal efficacy during treatment steps are given. Finally, this study highlights future challenges in MP removal and suggests key areas for further research, such as improving treatment efficiency and understanding MP characteristics.

Identifying sources and distribution of organic pollutants in a Moroccan river: Characterization of dissolved organic matter by absorption, excitation–emission fluorescence and chemometric analyses

This study investigates surface water contamination of Ben-Kazza River in Morocco, fed by effluents from an adjacent lagoon-based wastewater treatment plant (WWTP) and seasonally by industrial effluents, and which occasionally serves to irrigate agricultural fields. This study has two purpose: i) to track the main sources of contamination through the evolution of dissolved organic matter (DOM) characteristics along the watercourse, and ii) to characterize the WWTP influents and effluents with a focus on the efficiency of the lagoon treatment. We characterized a total of 495 water samples across the watercourse and from the inlet and outlet of the WWTP, using UV–visible absorption and excitation–emission fluorescence coupled with chemometric analyses. Absorption indicators and fluorescence indices were calculated and compared across sampling points. Results highlight spatial shifts together with temporal changes in DOM. PARAFAC identified components that varied between protein-like, humic-like and anthropogenic-like fluorophores along the river, permitted to trace the anthropogenic components and their sources. The lagoon treatment appeared to better remove fresh organic material than humic material: fluorescence intensity decreased by 68 % for peak T1 and by 22 % for peak C. Maximum fluorescence intensities (Fmax) decreased across all PARAFAC components, leading to more than 55 % reduction of ΣFmax.

Estimating fossil carbon contributions from chemicals and microplastics in Sweden's urban wastewater systems: A model-based approach

The importance of including fossil carbon in greenhouse gas emission assessments from wastewater treatment plants (WWTPs) is highlighted in the 2019 Intergovernmental Panel for Climate Change (IPCC) guidelines revision and underpinned by an increasing number of experimental studies. The present study introduces a model-based approach to estimate fossil carbon flows within Sweden's urban wastewater system, employing data on chemical and polymeric material flows as a starting point. Our findings show that fossil carbon constitutes approximately 12–17 % of the total carbon emissions to sewer systems. This result aligns with experimental data, which shows fossil carbon contributions to WWTP influents ranging from 4 to 28 %. Our analysis further indicates that microplastics contribute about 13 % of the fossil carbon influx to Swedish WWTPs, while organic chemicals account for the remaining 83 %.

Impact of reduced sampling frequency of illicit drug wastewater monitoring in the Netherlands

Drug consumption estimates are traditionally based on surveys or information from police seizures. Alternatively, residues of illicit drugs in untreated wastewater (influent) can be used to calculate mass loads and subsequently estimate drug consumption in the community throughout the week. For this purpose, wastewater is commonly sampled for seven consecutive days within the Sewage analysis CORe group Europe (SCORE), while other sampling schemes may be implemented in long-term studies outside this consortium. The current study demonstrates how sampling frequency of illicit drug residues in the influent of wastewater treatment plants (WWTPs) affects the derived weekly average. Thirty WWTPs were sampled over the course of 12 years and influents were analyzed for five drugs (metabolites): 3,4-methylenedioxymethamphetamine (MDMA), methamphetamine, amphetamine, benzoylecgonine (a metabolite of cocaine), and 11-nor-9-Carboxy tetrahydrocannabinol (THC-COOH). Subsequently, small and large WWTPs were grouped with a threshold of 100,000 inhabitants. After data curation, standardized loads were calculated (mg/d per 1000 inhabitants). Weekly averages of loads of the drug residues were calculated based on six scenarios (sampling one to six weekdays) and compared to the weekly average in the control situation (sampling seven weekdays) in a Monte Carlo simulation. Results indicate that drug residues with more dynamic loads over a week require more frequent sampling. The analysis illustrates that a decreased sampling frequency (4 or 5 days per week) still leads to a representative weekly average for all drugs tested when a deviation up to a factor of 1.25 is deemed acceptable. However, knowledge on typical levels is necessary to define outliers. We therefore recommend to study dynamics in drug residue loads for WWTPs before reducing sampling frequency in long term monitoring programs.

Exposure pattern of triclosan and tetracycline change their impacts on methanogenic digestion microbiomes

Triclosan (TCS) and tetracycline (TC) as common antibacterial agents are frequently detected in the influent of wastewater treatment plants. The TCS and TC exposure patterns may determine their impacts on wastewater treatment microbiomes, on which information remains unknown. In this study, the impacts of sequential exposure of TCS and TC on methanogenic digestion microbiomes in upflow anaerobic sludge blanket (UASB) reactors were analyzed and compared with that of the same microbiomes being simultaneously exposed to TCS and TC. Results indicated that the UASB reactor 2 (MD2) with sequential TCS-TC exposure consistently demonstrated higher chemical oxygen demand (COD) removal efficiency (94.7 %). In contrast, in the MD1 reactor, COD removal efficiency decreased from 94.4 % to 82.7 % upon simultaneous exposure to TCS and TC. Accordingly, a 1.8 times higher enrichment of total antibiotic resistance genes (ARGs) was observed in MD1 relative to MD2. Using a dissimilarity-overlap approach, the MD2 microbiome with sequential exposure was predominantly mediated by deterministic factors in their community assembly (largely contributed by abundant and intermediate biospheres), resulting in microbial interaction networks with higher average clustering coefficients and shorter average path lengths, compared to the MD1 microbiomes. Our results could support sustainable management of TCS and TC contamination in wastewater treatment plants.

Klebsiella pneumoniae species complex: From wastewater to the environment

Klebsiella pneumoniae plays a significant role in nosocomial infections and spreading antibiotic resistance, and therefore forms a major threat to public health. In this study, we investigated the role of the wastewater pathway in the spread of pathogenic bacteria and more specifically, in the spread of antibiotic resistant Klebsiella pneumoniae subspecies. Whole-genome sequencing was performed of 185 K. pneumoniae isolates collected from hospital, nursing home, and community wastewater, the receiving wastewater treatment plant (WWTP), and clinical isolates from the investigated hospital. K. pneumoniae isolates from different sources were not genetically related, except for WWTP influent (46.5%) and effluent (62.5%), revealing survival of bacteria from wastewater treatment. The content of antibiotic resistance (ARGs), virulence, and plasmid replicon genes differed between K. pneumoniae subspecies and their origin. While chromosomal bla genes were specific for each K. pneumoniae subspecies, bla genes predicted in plasmid contigs were found in several K. pneumoniae subspecies, implying possible gene transfer between subspecies. Transferable ARGs were most abundant in patients and hospital isolates (70%), but the average number of plasmid replicon genes per isolate was similar across all sources, showing plasmid content being more relevant than plasmid quantity. Most patient (90%) and hospital wastewater (34%) isolates were K. pneumoniae subsp. pneumoniae, and the yersiniabactin cluster genes ybt, fyuA, and irp12 were only found in this subspecies, as were the IncFII(pECLA), IncHI2A, and IncHI2 plasmid replicon genes, suggesting the clinical origin of these type of plasmids.

Assessing the effects of salinity on microbial communities and pollutant removal in urban wastewater treatment plants

This study assessed the impact of electrical conductivity (EC) on the microeukaryotic community and pollutant removal efficiency in full-scale wastewater treatment plants (WWTPs) in Catalonia, Spain. Monthly samples from seven WWTPs (2010−2021) were collected, with microbial communities identified by microscopy and effluent quality parameters measured. Linear mixed-effects models (LMER), indicator species analysis (IndVal), and structural equation modeling (SEM) were used to evaluate the effects of EC on WWTP operation and microbial communities. EC levels varied widely among WWTPs (800 to 15,000 μS cm−1), with mean removal rates generally low, not exceeding 26 %. EC removal was inversely correlated with organic matter removal (p < 0.05). IndVal analysis revealed distinct microbial communities associated with each WWTPs along the EC gradient (e.g., Beggiatoa spp. and Epistylis sp. were associated with high and low EC, respectively). High EC and peaks negatively affected the abundance of certain microorganisms (e.g., Acineria uncinata) (p < 0.05). Ciliate genera were most affected by EC peaks, with different species showing different salinity tolerance ranges (e.g. Holophyra discolor was affected by EC > 3000 μS cm-1). Seasonal variations did not significantly alter community sensitivity to salinity (p > 0.05). LMER and SEM analyses revealed strong adverse effects of high EC and EC peaks on microbial diversity, richness, and the efficiency of organic matter and TKN removal (p < 0.05). This highlights the importance of monitoring and controlling EC levels in WWTP influent to maintain optimal treatment performance and the need for effective technologies or biological processes to mitigate saline discharges into rivers.

Batch studies on the biodegradation of paracetamol and 1,4-hydroquinone by novel bacterial strains isolated from extreme environmental samples and the identification of candidate catabolic genes

The emerging pollutant paracetamol (APAP) is one of the most prescribed drugs worldwide. In addition, APAP and its main metabolites, namely, 4-aminophenol (4-AP), hydroquinone (H2Q), benzoquinone (BQ), and 2,5-dihydroxy-1,4-benzoquinone (2,5-OH-BQ), among others, are frequently detected in wastewater treatment plants (WWTPs) influents, effluents, and the environment. Thus, continuous release into the environment, especially aquatic environments, is a source of general concern. Six APAP-degrading bacterial strains were isolated from two mine samples from the Iberian Pyrite Belt (Lousal and Poderosa mines). Mycolicibacterium aubagnense HPB1.1, which was isolated using enrichment cultures from the Poderosa mine sample in the presence of H2Q as the sole carbon source, also showed APAP biodegrading capabilities. Pure cultures of this strain degraded 34.3 mg L−1 of APAP in 5 days and 9.4 mg L−1 of H2Q in 4 days. Interestingly, BQ and 2,5-OH-BQ were detected as metabolites resulting from H2Q abiotic degradation, but these compounds were removed in the strain’s cultures. Furthermore, M. aubagnense HPB1.1 whole-genome was sequenced, and its encoded proteins were aligned with enzymes of APAP-degrading bacteria recovered from databases and literature aiming to identify candidate catabolic genes. Putative amidases, deaminases, hydroxylases, and dioxygenases, responsible for the degradation of APAP by the HPB1.1 strain, were identified by similarity, corroborating its ability to transform APAP and its intermediate metabolite H2Q into less toxic metabolic compounds due to their capacity to break the aromatic ring of these molecules.

Occurrence and analysis of microplastics in municipal wastewater, Poland

Microplastics are a growing environmental threat and wastewater treatment plants have been identified as significant conduits for these pollutants. This study addresses microplastic loading in the influent of a large urban wastewater treatment plant, presenting a detailed analysis of their prevalence and characteristics. Our findings reveal a concentration of 4.09 microplastic particles per litre in the tributary. We performed a detailed statistical comparison of the microplastic particles, categorising them by shape, size, colour, and polymer type. Using Fourier transform total reflectance infrared spectroscopy, we identified 13 different polymer types, with polyethylene terephthalate, rubber, and polyethylene predominating. The analysis showed that textile fibres, mainly from clothing, are the most prevalent form of microplastic in wastewater, followed by fragments from the breakdown of larger plastic objects and films. This research highlights the critical need for strategic interventions to mitigate microplastic pollution at municipal sources.

Impacts of projected future changes in precipitation on wastewater treatment plant influent volumes connected by combined sewer collection systems

Climate change induced precipitation changes can impact wastewater influent volumes and, in turn, the design and operation of wastewater treatment plants (WWTPs). As influent volumes approach or exceeds the design capacity of the WWTP, the likelihood of poor treatment or untreated discharges that result in environmental damage, increases. To date, there has been a lack of research analysing the impact changes in precipitation may have on influent volumes of WWTPs with combined sewerage systems. This study leverages data driven models of observed precipitation and influent volumes for 14 Irish WWTPs with combined sewerage systems, to project monthly wastewater influent volumes in 2041 – 2060 using Ireland’s most up-to-date high resolution multi-model RCM projections under RCPs 4.5 and 8.5. With changing monthly average daily precipitation, influent volumes for all the WWTPs demonstrated maximum decreases during summer months for both RCP 4.5 and RCP 8.5. Winter months showed increasing trends in influent volumes, particularly under RCP 8.5. The results indicate that with projected increase in high and very high precipitation days in Ireland (under CMIP5), the return periods for influent volumes that exceed the hydraulic capacity of 5 of the WWTPs will reduce. This work also presents a framework by which newer high-resolution downscaled climate models can be used to developed updated impact analysis of changing rainfall patterns on wastewater. It likely that wastewater treatment infrastructure will need to adapt to more intense precipitation to minimise the occurrence of combined sewer overflows.

Sexual hormones monitoring in surface waters and wastewaters from Northern Italy by thin film microextraction coupled with HPLC-MS/MS.

The occurrence of sex steroid hormones, viz. oestrogens and progestins, in aquatic ecosystems is of global concern due to their role as endocrine disrupting chemicals, even at low concentration (μg L-1 or less). Thus, it is essential to monitor these organic pollutants to get a realistic picture of their presence and to control their contamination levels in environmental water bodies. In this respect, we have explored the use of self-prepared polymeric films as novel sorptive phase for the microextraction of 17β-estradiol, 17α-ethinylestradiol, estrone, progesterone, medroxyprogesterone acetate and hydroxyprogesterone. The thin film microextraction procedure has been developed, evaluating different film compositions, sample volumes and elution conditions to recover the sorbed analytes. The overall method provides good reproducibility (RSD < 12%) and recoveries higher than 60%. The final method has been applied to environmental monitoring in surface waters (river and lake samples) and urban wastewater treatment plant effluents and influents from Northern Italy, to get a contamination snapshot of this highly urbanized area.