Warm Bias Research Articles

Sea surface temperature error under tropical cyclone in the western North Pacific.

Tropical cyclone forecasting relies on accurate sea surface temperature, yet the errors in available sea surface temperature products remain unclear. Here, I evaluate the sea surface temperature errors under tropical cyclones in the western North Pacific based on surface drifters across eight widely-used datasets, including satellite, atmospheric and oceanic analysis-or-reanalysis products, spanning from 2014 to 2023. The ensemble mean bias and root-mean-squared-error are firstly quantified. Both satellite and oceanic analysis sea surface temperatures exhibit a cold bias, while atmospheric analysis-or-reanalysis sea surface temperature shows a warm bias. Specifically, atmospheric analysis-or-reanalysis products consistently show a warm bias in the right-rear quadrant of the tropical cyclone coordinate system. Regarding root-mean-squared-error, for most products, the right side consistently exhibits higher errors than the left side. SST bias significantly impacts tropical cyclone intensity change as indicated by empirical relationship. These results provide direct insights for operational tropical cyclone forecasting and research.

Implications of CMIP6 Models‐Based Climate Biases and Runoff Sensitivity on Runoff Projection Uncertainties Over Central India

ABSTRACTAccurate runoff projections are vital for developing climate adaptation strategies, yet significant uncertainties persist. The commonly employed approaches to constrain these uncertainties rely on the stationarity of climate biases and runoff sensitivity, which may not hold for climate‐sensitive regions (e.g., semi‐arid regions). This study investigates the validity of the stationarity assumption across 29 CMIP6 models, encompassing diverse climate biases (Dry Warm, Wet Warm, Dry Cold, and Wet Cold), utilising a semi‐arid region in central India as a testbed. The implications of this assumption on runoff projection uncertainties were comprehensively assessed across the runoff modelling chain for three time periods (the 2030s, 2060s and 2090s) based on the Soil and Water Assessment Tool (SWAT) simulations. The results highlight the non‐stationary nature of climate biases and runoff sensitivity under future scenarios, challenging the widespread applicability of common uncertainty‐constraining approaches. Moreover, the impact of non‐stationarity on runoff projection uncertainty was found to be strongly influenced by the choice of GCMs, preprocessing methods and climate change scenarios. In the 2030s, GCMs dominate runoff uncertainty, with dry models exhibiting ~10%–15% higher uncertainty compared to warm models, which is further amplified when interacting with warm biases. However, from the mid‐century onwards, the bias‐adjustment approaches and climate change scenarios significantly shape runoff projection uncertainties under non‐stationary conditions. These findings emphasise the potential of climate bias and runoff sensitivity‐based GCM selection for reducing runoff uncertainty in near‐future assessment (2030s). For mid‐term and long‐term runoff projections, addressing diverse climate biases through bias‐adjustment approaches is more viable. This study offers critical insights to prioritise the development of a non‐stationarity‐based approach for reliable runoff projections in climate‐sensitive regions.

Antarctic sea ice surface temperature bias in atmospheric reanalyses induced by the combined effects of sea ice and clouds

Sea-ice surface temperature from atmospheric reanalysis has been used as an indicator of ice melt and climate change. However, its performance in atmospheric reanalyses is not fully understood in Antarctica. Here, we quantified biases in six widely-used reanalyses using satellite observations, and found strong and persistent warm biases in most reanalyses examined. Further analysis of the biases revealed two main culprits: incorrect cloud properties, and inappropriate sea-ice representation in the reanalysis products. We found that overestimated cloud simulation can contribute more than 4 K warm bias, with ERA5 exhibiting the largest warm bias. Even in reanalysis with smaller biases, this accuracy is achieved through a compensatory relationship between relatively lower cloud fraction bias and overestimated sea ice insulation effect. A dynamic downscaling simulation shows that differences in sea-ice representation can contribute a 2.3 K warm bias. The representation of ice concentration is the primary driver of the spatial distribution of biases by modulating the coupling between sea ice and clouds, as well as surface heat conduction. The lack of a snow layer in all reanalyses examined also has an impact on biases.

Comparison of Physically Based and Empirical Modeling of Nighttime Spatial Temperature Variability during a Heatwave in and around a City

Abstract The numerical weather prediction model HARMONIE-AROME and a multiple linear regression model (referred to in this article as the TURCLIM model after the local climate observation network) were used to model surface air temperature for 25–31 July 2018 in the City of Turku, Finland, to study their performance in urban areas and surrounding rural areas. The 0200 LT (local standard time) temperatures modeled by the HARMONIE-AROME and TURCLIM models were compared to each other and against the observed temperatures to find the model best suited for modeling the urban heat island effect and other spatial temperature variabilities during heatwaves. Observed temperatures were collected from 74 sites, representing both rural and urban environments. Both models were able to reproduce the spatial nighttime temperature variation. However, HARMONIE-AROME modeled temperatures were systematically warmer than the observed temperatures in stable conditions. Spatial differences between the models were mostly related to the physiographic characteristics: for the urban areas, HARMONIE-AROME modeled on average 1.4°C higher temperatures than the TURCLIM model, while for other land-cover types, the average difference was 0.51°C at maximum. The TURCLIM model performed well when the explanatory variables were able to incorporate enough information on the surrounding physiography. Respectively, systematic cold or warm bias occurred in the areas in which the thermophysically relevant physiography was lacking or was only partly captured by the model. Significance Statement As more and more people are living in an urban environment, the demand for accurate urban climate modeling is growing. This study aims to understand the differences between the numerical weather prediction and multiple linear regression modeling and their limitations in modeling surface air temperature in subkilometer scale. The case study shows that models are capable of predicting the spatial variation of 0200 LT nighttime temperature during a heatwave in a high-latitude coastal city. Both models are therefore valuable assets for city planners who need accurate information about the impacts of the physiography on the urban climate. The results indicate that to improve the performance of the models, more accurate physiographic description and higher spatial resolution of the models are needed.

Assessment of high-resolution regional ocean reanalysis K-ORA22 for the Northwest Pacific

The Korea Institute of Ocean Science and Technology developed the Korea Operational Oceanographic System-Ocean Predictability Experiment for Marine Environment (KOOS-OPEM), a high-resolution (1/24°, 51 vertical levels) ocean prediction model for the Northwest Pacific Ocean that incorporates ensemble optimal interpolation. In this study, we present KOOS-OPEM ReAnalysis version 2022 (K-ORA22), which covers the period from 2011 to 2022. We conducted a comparative analysis between K-ORA22 and other high-resolution (1/10°–1/12°) global reanalyses, including the Hybrid Coordinate Ocean Model, Global Ocean Reanalysis and Simulation (GLORYS), and Bluelink ReAnalysis (BRAN), to demonstrate the reproducibility and reliability of regional characteristics. Statistical comparisons revealed that while K-ORA22 exhibited some warm biases, its sea surface temperature (SST) anomaly correlation after removing the seasonal cycle was approximately 0.87, comparable to other reanalyses. Additionally, K-ORA22 effectively reproduced coastal upwelling, which is characterized by a sharp decrease in SST, as observed by marine meteorological buoys in the Southwest of the East/Japan Sea. K-ORA22 exhibits a warm bias of approximately 0.50 °C around 200 m, slightly higher than those of GLORYS and BRAN, while maintaining a low salinity bias in the subsurface. Notably, K-ORA22 outperformed the other reanalyses in accurately reproducing the unique characteristics of North Pacific and East Sea intermediate waters, characterized by a salinity minimum layer. In addition, K-ORA22 stands out in its ability to accurately reproduce the Yellow Sea Cold Water Mass with a low-temperature root-mean-square error (RMSE) of 0.76 °C in the Yellow Sea (YS) region. However, it exhibited the highest RMSE for salinity in the YS region and Korea/Tsushima Strait, indicating a potential overestimation of river discharge from Korea and China. While the sea surface height (SSH) anomaly correlation of K-ORA22 did not surpass 0.80 in the entire region because of limitations in the background error covariance used, its ability to reproduce the Kuroshio path was comparable to those of other reanalysis datasets. In conclusion, K-ORA22 excels in reproducing the unique characteristics of Korean marginal seas. Still, it exhibits weaknesses, such as the overestimation of river discharge and a somewhat limited ability to simulate SSH variability, compared with other global reanalyses. We plan to enhance K-ORA22 by updating background error covariance, addressing biases related to river discharge and assimilating the best available in situ observations and satellite data.

Impact of Cloud Vertical Overlap on Cloud Radiative Effect in the Korean Integrated Model (KIM) Seasonal Simulations during Boreal Summer and Winter

AbstractExponential-random vertical overlap of clouds is applied for radiative processes in a research version of the Korean Integrated Model (KIM) to replace the maximum-random vertical overlap of clouds. The cloud radiative effect (CRE) increases overall when the exponential-random overlap is used. This is because vertically continuous clouds, which are assumed to overlap maximally under the maximum-random overlap assumption, can be relaxed to random overlap depending on the vertical distance between cloud layers and the specified decorrelation length of clouds. CRE is more enhanced by considering the latitudinal dependency of cloud decorrelation length based on previous observational studies. This alleviates biases in CRE, which is underestimated overall, except in the low latitudes where the CRE is overestimated in the present simulations. The interaction between radiative and convective processes plays a role in decreasing CRE over the tropical western Pacific region, where strong convections develop, although the direct impact of applying the exponential-random overlap is to decrease the vertical overlap between ice clouds. The simulation of temperature in the lower troposphere is improved owing to the changes in cloud overlap. The warm bias over the Eurasian continent, in particular, is alleviated as more shortwave fluxes are reflected due to increased CRE.

Recent improvements and maximum covariance analysis of aerosol and cloud properties in the EC-Earth3-AerChem model

Abstract. Given the importance of aerosols and clouds and their interactions in the climate system, it is imperative that the global Earth system models accurately represent processes associated with them. This is an important prerequisite if we are to narrow the uncertainties in future climate projections. In practice, this means that continuous model evaluations and improvements grounded in observations are necessary. Numerous studies in the past few decades have shown both the usability and the limitations of utilizing satellite-based observations in understanding and evaluating aerosol–cloud interactions, particularly under varying meteorological and satellite sensor sensitivity paradigms. Furthermore, the vast range of spatio-temporal scales at which aerosol and cloud processes occur adds another dimension to the challenges faced when evaluating climate models. In this context, the aim of this study is two-fold. (1) We evaluate the most recent, significant changes in the representation of aerosol and cloud processes implemented in the EC-Earth3-AerChem model in the framework of the EU project FORCeS compared with its previous CMIP6 version (Coupled Model Intercomparison Project Phase 6; https://pcmdi.llnl.gov/CMIP6/, last access: 13 February 2019). We focus particularly on evaluating cloud physical properties and radiative effects, wherever possible, using a satellite simulator. We report on the overall improvements in the EC-Earth3-AerChem model. In particular, the strong warm bias chronically seen over the Southern Ocean is reduced significantly. (2) A statistical, maximum covariance analysis is carried out between aerosol optical depth (AOD) and cloud droplet (CD) effective radius based on the recent EC-Earth3-AerChem/FORCeS simulation to understand to what extent the Twomey effect can manifest itself in the larger spatio-temporal scales. We focus on the three oceanic low-level cloud regimes that are important due to their strong net cooling effect and where pollution outflow from the nearby continent is simultaneously pervasive. We report that the statistical covariability between AOD and CD effective radius is indeed dominantly visible even at the climate scale when the aerosol amount and composition are favourably preconditioned to allow for aerosol–cloud interactions. Despite this strong covariability, our analysis shows a strong cooling/warming in shortwave cloud radiative effects at the top of the atmosphere in our study regions associated with an increase/decrease in CD effective radius. This cooling/warming can be attributed to the increase/decrease in low cloud fraction, in line with previous observational studies.

Contribution of land-atmosphere coupling in 2022 CONUS compound drought-heatwave events and implications for forecasting

Severe compound drought-heatwave events were observed over three regions of the Contiguous United States (CONUS), Northwest (NW), Great Plains (GP), and Northeast (NE) regions, during July and August 2022. In this study, we have found that the developments of these drought-heatwave events were shaped by different land-atmosphere coupling behaviors which are associated with water and energy limitation regimes in these regions. In the NW and GP regions, the surface soil moisture (SM) and evapotranspiration (ET) were coupled through water-limited processes. Heatwaves in these two regions were affected by the decrease of ET and the available SM due to the precipitation deficit. This type of land-atmosphere coupling was especially prominent in the GP. In the NE region, the heatwave governed ET through the increase of potential ET (PET) based on energy-limited coupling, which played a crucial role in the development of drought.The impacts of the different land-atmosphere coupling behaviors on the predictability of the 13-km Geophysical Fluid Dynamics Laboratory (GFDL) System for High-resolution prediction on Earth-to-Local Domains (SHiELD) were also investigated by checking its 10-day forecasts during the same period. The analysis was particularly focused on the GP and NE regions, where different land-atmosphere coupling behaviors were observed. The model's warm bias in the GP region was associated with the overestimated net radiation, and the bias was further amplified through the water-limited coupling. In the NE region, the PET-related variables, including surface air temperature, influenced the predictability of drought onset by limiting ET through the energy-limited coupling. Based on our findings, this study highlights the crucial role of land-atmosphere coupling behaviors and provides a scientific strategy for enhancing the model predictability of compound drought-heatwaves.

Future changes in extremes across China based on NEX-GDDP-CMIP6 models

This paper evaluates the NASA Earth Exchange Global Daily Downscaled Projections’ (NEX-GDDP) CMIP6 models’ performance in simulating extreme climate indices across China and its eight subregions for the period 2081–2100 under SSP1-2.6, SSP2-4.5 and SSP5-8.5 scenarios. The models effectively reproduce the spatial patterns of extreme high temperatures, especially in northern China. They show enhanced capabilities in accurately simulating the maximum daily maximum temperature (TXx) and the number of high temperature days (T35). They improve the cold bias of the TXx index in Northwest China and warm bias in South China. In terms of precipitation, the models demonstrate strong performance, evidenced by significant spatial correlations in total wet day precipitation (PTOT) simulations. They reduce the biases of PTOT and simple daily intensity (SDII) compared to CMIP6 models. Regionally, they enhance PTOT accuracy along southern coasts and in Yunnan, better captures very heavy precipitation days (R20) in the Southwest region, max 5-day precipitation (RX5D) in North China and Southwest region, and SDII in the Northeast region and Yunnan. Under SSP5-8.5 scenario, significant impacts include increased TXx in Northwest China, more heatwave days in Southwest China, and more T35 in South China. Extreme precipitation will become more frequent in South and East China, with the greatest intensity increases in Southwest China (SWC1). North China will see fewest consecutive dry days (CDD) indices, while consecutive wet days (CWD) will prominently rise in SWC1.

A Comprehensive Evaluation of Mean and Extreme Climate for the Conformal Cubic Atmospheric Model (CCAM)

Abstract This study evaluates the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling fifth major global reanalysis produced by European Centre for Medium-Range Weather Forecasts (ECMWF) (ERA5) reanalysis data from 1985 to 2014, following a 5-yr spinup period. It focuses on daily maximum and minimum temperatures and daily precipitation, comparing CCAM to ERA5 and the Australian Gridded Climate Data (AGCD). The CCAM effectively reduces warm biases in daily minimum temperatures but struggles with cold biases in daily maximum temperatures, particularly in northern Australia during the wet season, possibly due to high-level cloud overestimation. Precipitation tends to be overestimated, especially in extreme rainfall events, though offset by an underestimation of low rainfall. The study showcases improvements in the annual minimum of daily minimum temperatures across most of Australia, while identifying challenges in forecasting cooler extreme temperatures. It adds value to annual maximum daily maximum temperatures in southern Australia but less so in the north. The analysis of the 5% annual exceedance probability (AEP5%) yields mixed results influenced by location and potential ocean temperature changes. Some coastal areas exhibit lost value, possibly linked to ocean temperature shifts. Furthermore, CCAM’s representation of maximum annual daily and 5-day rainfall reveals lost value, particularly in eastern Australia due to an overestimate of extreme rainfall. Despite the challenges of comparing a dynamical downscaling model like CCAM to ERA5, this study highlights its benefits in reducing biases, especially in temperature representation. Given the larger biases in phase 6 of Coupled Model Intercomparison Project (CMIP6) global climate models, CCAM appears suitable for dynamic downscaling in climate projections, emphasizing the need for ongoing model enhancements, including addressing biases related to ephemeral water bodies and extreme rainfall. Significance Statement This study critically assesses the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling ERA5 reanalysis data from 1985 to 2014, offering valuable insights into climate modeling. Focusing on temperature and precipitation, CCAM proves effective in mitigating warm biases in daily minimum temperatures but encounters challenges with cold biases in daily maximum temperatures, particularly in northern Australia. The analysis reveals the overestimation of precipitation, especially in extreme events, yet identifies improvements in annual minimum daily minimum temperatures across Australia. The study underscores CCAM’s potential in reducing biases compared to CMIP6 global climate models, making it a promising tool for dynamic downscaling in climate projections. It emphasizes the necessity for ongoing model enhancements, particularly addressing biases related to ephemeral water bodies and extreme rainfall.

Integrating physics-based WRF atmospheric variables and machine learning algorithms to predict snowfall accumulation in Northeast United States

Accurate snowfall prediction is crucial for enhancing preparedness and resilience in the Northeast United States during winter weather events. This study introduces a novel approach that integrates Machine Learning (ML) models with atmospheric variables from the Weather Research and Forecasting (WRF) model to improve snowfall forecasts in the region. The significance lies in bridging the gap between physics-based Numerical Weather Prediction (NWP) models and the versatility of ML models, offering a promising advancement in winter storm predictions. Atmospheric variables related to 32 winter storms simulated by WRF, were used to feed Random Forest (RF) and Extreme Gradient Boosting (XGBoost) algorithms to predict 24 h accumulations of snowfall using the National Snowfall Analysis (NSA) product as reference. The comprehensive results revealed that the integrated approach provided more accurate snowfall prediction than the WRF and Air Force Weather Agency (AFWA) diagnostic, but faced challenges in the precision estimated by under-dispersion of the results. The WRF/XGBoost reduced the RMSE by 10.34 %, whereas WRF/RF reduced RMSE by 9.72 %, compared to WRF/AFWA. Similarly, WRF/XGBoost and WRF/RF increased the correlation coefficient by 12 % and 11 %. The most important variables in both ML algorithms were liquid water equivalent precipitation (LWE), snow ratio, wet-bulb temperature, temperature, and humidity at different heights, pressure tendency and wind speed, validating their ability to discern crucial factors influencing snowfall. Specific cases highlight the integrated approach’s effectiveness in addressing challenges faced by traditional diagnostics, including LWE overestimation and warm temperature bias. However, limitations emerge in capturing storms characterized by anomalous atmospheric conditions and high snowfall values, most likely attributed to underrepresentation in the training data. By highlighting strengths and acknowledging limitations, this integrated approach holds the potential for improved snowfall prediction for future storms in the region compared to the traditional approach.

On warm bias and mesoscale dynamics setting the Southern Ocean large-scale circulation mean state

A realistic representation of the Southern Ocean (SO) in climate models is critical for reliable global climate projections. However, many models are still facing severe biases in this region. Using a fully coupled global climate model at non-eddying (1/2∘) and strongly eddying (1/10∘) grid resolution in the SO, we investigate the effect of a 0.5 °C, 1.0 °C and 1.6 °C warmer than observed SO on i) the spin-up behaviour of the high-resolution simulation, and ii) the representation of main dynamical features, i.e., the Antarctic circumpolar current (ACC), the subpolar gyres, the overturning circulation and the Agulhas regime in a quasi-equilibrium state. The adjustment of SO dynamics and hydrography critically depends on the initial state and grid resolution. When initialised with an observed ocean state, only the non-eddying configuration quickly builds up a strong warm bias in the SO. The high-resolution configuration initialised with the biased non-eddying model state results in immense spurious open ocean deep convection, as the biased ocean state is not stable at eddying resolution, and thus causes an undesirable imprint on global circulation. The SO heat content also affects the large-scale dynamics in both low- and high-resolution configurations. A warmer SO is associated with a stronger Agulhas current and a temperature-driven reduction of the meridional density gradient at 45∘S to 65∘S and thus a weaker ACC. The eddying simulations have stronger subpolar gyres under warmer conditions while the response in the non-eddying simulations is inconsistent. In general, SO dynamics are more realistically represented in a mesoscale-resolving model at the cost of requiring an own spin-up.

Accuracy of daily extreme air temperatures under natural variations in thermometer screen ventilation

AbstractAccurate air temperatures underpin environmental research. Most professional meteorological air temperature measurements still expose thermometers within traditional, naturally ventilated screens. Their representation of true air temperature depends on screen airflow, and therefore local winds. Accuracies of daily maximum (Tmax) and minimum (Tmin) air temperatures are assessed by comparison between a naturally ventilated large conventional screen and a co‐located aspirated reference screen. In over 1200 days' data, the naturally ventilated Tmin and Tmax both showed small (median < 0.06°C) cold bias, but, in 1% of cases, warm Tmax bias and cold Tmin bias >|1°C|. The Tmin cold bias is associated with calm clear nights, and the Tmax warm bias events with calm winter days at low sun angles, allowing solar heating of the screen. The prevalence of poor natural ventilation, potentially affecting Tmin and Tmax, is estimated across European sites. Poor ventilation occurred at Tmin for 12% of values, and at Tmax for 4%. Climatological averaging will reduce these effects, but, without corroborating wind data, statistical changes in Tmin or Tmax, including identifying “Tropical Nights” (Tmin > 20°C) or occurrences of winter extremes, may have limited value. Wider adoption of aspirated thermometer screens, with an initial overlap period, will largely eliminate these effects.

Generation of state‐dependent ensemble perturbations based on time‐varying seawater density for GloSea5 initialization

AbstractIn this study, we developed a flow‐dependent oceanic initialization system for initializing the oceanic temperature and salinity in the Global Seasonal forecast system version 5 (GloSea5). Our algorithm overcomes the limitation of stationary perturbations for Ensemble Optimal Interpolation (EnOI) by spreading observed information along isopycnal lines to create three‐dimensional snapshot density states. The proposed algorithm, which we call state‐dependent ensemble‐based EnOI (SD‐EnOI), takes into account changes in the background error covariance over time without relying on ensemble model simulations. To evaluate the quality of the oceanic initial conditions (ICs) produced by SD‐EnOI, we compared them with those generated by the Global Ocean Data Assimilation and Prediction System version 1 (GODAPS1) operated by the Korea Meteorological Agency (KMA) throughout January 2017 to December 2017. Our findings show that the thermal construction of the SD‐EnOI ICs is more realistic than that of GODAPS1, particularly in the tropical Pacific region. The strong warm bias in sea surface temperature (SST) and the shallow mixed‐layer depth bias observed in the GODAPS1 ICs are not shown in SD‐EnOI. Due to the more realistic oceanic thermal structure present in the SD‐EnOI ICs, their use in retrospective forecast experiments resulted in a systematic reduction in climatological SST drift in the central‐eastern Pacific for forecasts up to four lead months compared to using GODAPS1 ICs. This demonstrates the significant impact of the initialization process on the quality of dynamical seasonal forecasts.

Assessing the Tropospheric Temperature and Humidity Simulations in CMIP3/5/6 Models Using the AIRS Obs4MIPs V2.1 Data

AbstractIn this study, the Atmospheric Infrared Sounder (AIRS) Observations for Model Intercomparison Projects (Obs4MIPs) V2.1 tropospheric air temperature, specific humidity, and relative humidity data are utilized to evaluate the global tropospheric temperature and humidity simulations in the fully coupled global climate models from the Coupled Model Intercomparison Project phases 3, 5, and 6 (CMIP3, CMIP5, and CMIP6), and possible simulation improvement in CMIP6 models in comparison to CMIP3 and CMIP5 models. Our analyses indicate that all three phases of CMIP models share similar tropospheric air temperature, specific humidity, and relative humidity biases in their multi‐model ensemble means relative to AIRS. Cold biases up to 4 K and positive relative humidity biases up to 20% are found in the free troposphere almost globally with maxima over the mid‐latitude storm tracks. Warm biases up to 2 K are seen over the Southern Ocean in the lower troposphere. Positive specific and relative humidity biases exist over the off‐equatorial oceans while negative specific and relative humidity biases are seen near the equator in the tropical free troposphere, which are related to the double‐intertropical convergence zone bias in the models. Both the air temperature and specific humidity biases are important to the relative humidity biases except in the tropical free troposphere where the specific humidity biases dominate. The tropospheric air temperature, specific humidity, and relative humidity biases are reduced from CMIP3 to CMIP5 and to CMIP6 at almost all pressure levels except at 300 hPa for specific humidity and in the boundary layer for relative humidity.

Inter‐comparison and validation of high‐resolution surface air temperature reanalysis fields over Italy

AbstractSurface air temperature (t2m) data are essential for understanding climate dynamics and assessing the impacts of climate change. Reanalysis products, which combine observations with retrospective short‐range weather forecasts, can provide consistent and comprehensive datasets. ERA5 represents the state‐of‐the‐art in global reanalyses and supplies initial and boundary conditions for higher‐resolution regional reanalyses designed to capture finer‐scale atmospheric processes. However, these products require validation, especially in complex terrains like Italy. This study analyses the capability of different reanalysis products to reproduce t2m fields over Italy during the 1991–2020 period. The analyses encompass ERA5, ERA5‐Land, the MEteorological Reanalysis Italian DAtaset (MERIDA), the Copernicus European Regional ReAnalysis (CERRA), and the Very High‐Resolution dynamical downscaling of ERA5 REAnalysis over ITaly (VHR‐REA_IT). The validation we conduct pertains to both the spatial distribution of 30‐year seasonal and annual normal values and the daily anomaly records. Each reanalysis is compared with observations projected onto its respective grid positions and elevations, overcoming any model bias resulting from an inaccurate representation of the real topography. Key findings reveal that normal values in reanalyses closely match observational values, with deviations typically below 1°C. However, in the Alps, winter cold biases sometimes exceed 3°C and show a relation with the elevation. Similar deviations occur in the Apennines, Sicily, and Sardinia. Conversely, VHR‐REA_IT shows a warm bias in the Po Valley up to 3°C in summer. Daily anomalies generally exhibit lower errors, with MERIDA showing the highest accuracy and correlation with observational fields. Moreover, when aggregating daily anomalies to annual time scales, the errors in the anomaly records rapidly decrease to <0.5°C. The results of this study empower reanalysis users across multiple sectors to gain a more profound insight into the capabilities and constraints of different reanalysis products. The knowledge and the characterization of the reanalyses t2m bias against observations can indeed be crucial when incorporating these products into their research and practical applications.

Thermal infrared shadow-hiding in GOES-R ABI imagery: snow and forest temperature observations from the SnowEx 2020 Grand Mesa field campaign

Abstract. The high temporal resolution of thermal infrared imagery from the Geostationary Operational Environmental Satellites R-series (GOES-R) presents an opportunity to observe mountain snow and forest temperatures over the full diurnal cycle. However, the off-nadir views of these imagers may impact or bias temperature observations, especially when viewing a surface composed of both snow and forests. We used GOES-16 and -17 thermal infrared brightness temperature observations of a flat snow- and forest-covered study site at Grand Mesa, Colorado, USA, to characterize how forest coverage and view angle impact these observations. These two geostationary satellites provided views of the study area from the southeast (134.1° azimuth, 33.5° elevation) and southwest (221.2° azimuth, 35.9° elevation), respectively. As part of the NASA SnowEx field campaign in February 2020, coincident brightness temperature observations from ground-based and airborne IR sensors were collected to compare with those from the geostationary satellites. Observations over the course of 2 cloud-free days spanned the entire study site. The brightness temperature observations from each dataset were compared to find their relative differences and how those differences may have varied over time and/or as a function of varying forest cover across the study area. GOES-16 and -17 brightness temperatures were found to match the diurnal cycle and temperature range within ∼ 1 h and ± 3 K of ground-based observations. GOES-16 and -17 were both biased warmer than nadir-looking airborne IR and ASTER observations. The warm biases were higher at times when the sun–satellite phase angle was near its daily minimum. The phase angle, the angle between the direction of incoming solar illumination and the direction from which the satellite is viewing, reached daily minimums in the morning for GOES-16 and afternoon for GOES-17. In morning observations, warm biases in GOES-16 brightness temperature were greater for pixels that contained more forest coverage. The observations suggest that a “thermal infrared shadow-hiding” effect may be occurring, where the geostationary satellites are preferentially seeing the warmer sunlit sides of trees at different times of day. These biases are important to understand for applications using GOES-R brightness temperatures or derived land surface temperatures (LSTs) over areas with surface roughness features, such as forests, that could exhibit a thermal infrared shadow-hiding effect.

Sensitivity of WRF-Simulated 2 m Temperature and Precipitation to Physics Options over the Loess Plateau

The current paper evaluates the weather research and forecasting (WRF) model sensitivity to five different combinations of cumulus, microphysics, radiation, and planetary boundary layer (PBL) schemes over Loess Plateau for the period 2015, in terms of 2 m temperature and precipitation. The WRF configuration consists of a 10 km resolution domain nested in a coarser domain driven by European Center for Medium-Range Weather Forecasts Reanalysis (ERA-Interim) data. The model simulated 2 m temperature and precipitation have been evaluated at daily and monthly scales with gridded observational dataset. The analysis shows that all experiments reproduce well the daily 2 m temperature, with overestimation particularly in the low-temperature range. Precipitation is less well simulated, with underestimation in all range, especially for intense rainfall. Comparing with ERA-Interim, WRF shows no clear benefit in simulating daily 2 m temperature while prominent improvement in simulating daily precipitation. WRF simulations capture the annual cycle of monthly 2 m temperature and precipitation with a warm bias and wet bias for most experiments in summer. Some reasonable configurations are identified. The “best” configuration depends on the criteria.

Improving land surface feedbacks to the atmosphere in convection-permitting climate simulations for Europe

We investigated positive temperature (warm) and negative precipitation (dry) biases in convection-permitting model (CPM) simulations for Europe (2.2 km grid spacing) that were considerably larger than in equivalent regional climate model (RCM) simulations (12 km grid spacing). We found that improvements in dry biases could be made by (1) using a more complex runoff scheme which takes into account topography and groundwater, (2) delaying the onset of water stress in vegetation to enhance transpiration, (3) changing the microphysics scheme to CASIM (Cloud AeroSol Interacting Microphysics) which also decreases heavy rainfall and increases light rainfall. Increasing soil moisture to the critical point can remove dry precipitation biases in southern Europe but not in northern areas, indicating that soil moisture limitation is a key contributor to precipitation biases in the south only. Instead, in the north, changing the cloud scheme of the model has more impact on precipitation biases. We found that the more intense and intermittent nature of rainfall in the CPM, which is more realistic leads to different canopy interception compared to the RCM. This can impact canopy evaporation, evapotranspiration and feed back on precipitation. Increasing rainfall storage in the canopy only leads to small improvements in warm biases, since it still fills rapidly with intense CPM rainfall, suggesting the need for an additional moisture store via improved groundwater modelling or surface pooling. Overall, this work highlights the challenge of correctly capturing land surface feedbacks in CPMs, which play an important role in future climate projections in some regions.

Two-stage image colorization via color codebook

Image colorization has a wide range of applications, but it remains a challenging task due to it is an inherently ill-posed problem with multi-modal uncertainty. The advancement of deep learning techniques has provided extensive avenues for addressing image colorization. However, current works mainly suffer from two problems: inaccurate colorization leading to biased color tones (e.g., cool or warm bias) and undersaturation of images. Existing Transformer-based methods can produce impressive results, but they often come with high training costs and may result in color overflow effects. In this paper, we propose a two-stage image colorization strategy based on a color codebook. Clustering methods in the three-dimensional CIE Lab color space is proposed to integrate brightness information so that the colors in the codebook can be lifelike. In the first stage, we treat the colorization task as a classification problem based on a color codebook, and a high-quality codebook is advantageous for enhancing color classification accuracy. In the second stage, different from the traditional Transformer-based method, a pyramid-type Transformer structure is used to extract rich image features to refine the colors, which can solve potential color bands, color errors and color overflow. In addition, the parameters and FLOPs are significantly smaller than other traditional Transformer-based methods. Extensive experiments demonstrate that our method outperforms state-of-the-art approaches. On the ImageNet validation set, the achieved values are 4.60, 25.23, 0.19, and 39.82 in terms of FID, PSNR, LPIPS, and CF, respectively. On the COCO-Stuff validation set, the achieved values are 5.62, 25.15, 0.19, and 36.25 in terms of FID, PSNR, LPIPS, and CF, respectively. The codes are available at https://github.com/Tanghui2000/Two-stage_Image_Colorization_via_Color_Codebook.