Wall Regeneration Research Articles

Numerical analysis of the subway tunnel thermal environment to predict the train-mounted condenser inlet temperature in the cold climate zone of China

Reasonable control of the subway tunnel thermal environment is the main objective of the ventilation system design, which is critical to the effectiveness of the train-mounted condenser. In this study, a numerical model utilizing the dynamic mesh technique is developed to investigate the subway tunnel thermal environmental characteristics in the cold climate zone of China. Full-scale field measurements are implemented to verify the model’s accuracy. According to the simulation results, the single Piston wind shaft (PWS) (outlet end) is the optimal ventilation system in the cold climate zone of China. The effects of tunnel wall temperature, passenger flow, and regeneration braking system (RBS) efficiency on the subway tunnel thermal environment are thoroughly analyzed, which shows that the tunnel wall temperature has the greatest effect on the air temperature rise of the subway interval tunnel, the passenger flow has the greatest effect on the air temperature rise of the subway station tunnel. In contrast, the RBS efficiency has the least effect on the maximum condenser inlet temperature. On this basis, the predictive model for the maximum and average condenser inlet temperature is proposed. The findings of this study provide a theoretical basis for temperature control in subway tunnels in the cold climate zone of China and contribute to the safe and energy-efficient operation of subway environmental control systems.

ROS responsive conductive microspheres loaded with salvianolic acid B as adipose derived stem cell carriers for acute myocardial infarction treatment

Stem cell therapy is currently the most promising strategy for the treatment of myocardial infarction. However, the development of injectable cell carriers that can scavenge reactive oxygen species (ROS) in the infarct zone to improve transplanted cell survival remains a challenge. Here, we developed a ROS responsive conductive microsphere based on chitosan (CS) and dextran (DEX) with 4-formylphenylboronic acid (4-FPBA) as a cross-linking agent and the addition of graphite oxide (GO) and the anti-inflammatory agent salvianolic acid B (SalB), as a cell delivery carrier for myocardial infarction. These microspheres were crosslinked by dual dynamic networks of Schiff base and phenylborate bonds. The relationship between CS concentration and microsphere particle size, as well as the biocompatibility, ROS responsiveness, anti-inflammatory properties, and effects on myogenic differentiation of H9C2 cells were fully investigated. The microspheres exhibit good biocompatibility, proliferation promoting, differentiation promoting, antioxidant, and anti-inflammatory properties. When applied to mice myocardial infarction models, the ROS responsive conductive microspheres loaded with SalB and adipose derived stem cells (ADSC) exhibited excellent in vivo repair ability. In addition, they reduced myocardial fibrosis and promoted ventricular wall regeneration by promoting the expression of Connexin 43 (Cx43) and CD31, ultimately reshaping the infarcted myocardium, suggesting their great potential as cell delivery carriers for myocardial infarction treatment.

Multifunctional hernia repair biopatch: Development, characterization, in vitro and in vivo evaluation

Incisional hernia, a prevalent postoperative complication, is characterized by the protrusion of organs or tissues through damaged abdominal wall. Predisposing factors for hernias include obesity, wound infections, immunosuppression, and comorbidities. However, hernia patches currently in use, including the commercial polypropylene (PP) patch, still have limitations in providing the mechanical and biological properties necessary for abdominal wall regeneration. In this study, three dimensional (3D) printing and coaxial electrospinning methods were combined to create a multifunctional double layered hernia repair biopatch to overcome these limitations. The double-layer design of the biopatch serves a multifunctional role in addressing incisional hernia models, with 3D printed ciprofloxacin (CIP) loaded polycaprolactone (PCL)/gelatin (Ge) scaffold (3DCIP) layer and coaxially electrospun PCL/Ge/κ-carrageenan (κ-C) nanofiber (NF) layers. While 3DCIP layers provides temporary mechanical reinforcement to the damaged abdominal wall, prevention of adhesions to internal organs, and reduction of surgical site infections, NF layer serves as tissue regeneration and fast wound healing. The developed multifunctional hernia biopatches underwent comprehensive physical and chemical characterization, followed by in vitro and in vivo evaluations. These evaluations included comparisons with a commercial PP patch, which was used as the control in the experiments. The study successfully fabricated multifunctional hernia biopatches with excellent antibacterial properties, high mechanical robustness, and strong biocompatibility.

Designer umbilical cord-stem cells induce alveolar wall regeneration in pulmonary disease models.

Researchers are focusing on cellular therapy for chronic obstructive pulmonary disease (COPD) using mesenchymal stem cells (MSCs), with human bone marrow-derived MSCs (hBM-MSCs) leading the way. However, BM-MSCs may not be as optimal as therapeutic cells owing to their low growth potential, invasive harvesting, and high expression of aging-related genes with poor differentiation potential. Consequently, umbilical cord-derived MSCs (hUC-MSCs), which have many excellent features as allogeneic heterologous stem cells, have received considerable attention. Allogeneic and heterologous hUC-MSCs appear to be promising owing to their excellent therapeutic properties. However, MSCs cannot remain in the lungs for long periods after intravenous infusion. To develop designer hUC-MSCs (dUC-MSCs), which are novel therapeutic cells with modified cell-adhesion properties, to aid COPD treatment. dUC-MSCs were cultured on type-I collagen gels and laminin 411, which are extracellular matrices. Mouse models of elastase-induced COPD were treated with hUC-MSCs. Biochemical analysis of the lungs of treated and control animals was performed. Increased efficiency of vascular induction was found with dUC-MSCs transplanted into COPD mouse models compared with that observed with transplanted hUC-MSCs cultured on plates. The transplanted dUC-MSCs inhibited apoptosis by downregulating pro-inflammatory cytokine production, enhancing adhesion of the extracellular matrix to alveolar tissue via integrin β1, promoting the polarity of M2 macrophages, and contributing to the repair of collapsed alveolar walls by forming smooth muscle fibers. dUC-MSCs inhibited osteoclastogenesis in COPD-induced osteoporosis. hUC-MSCs are a promising cell source and have many advantages over BM-MSCs and adipose tissue-derived MSCs. We developed novel designer cells that may be involved in anti-inflammatory, homeostatic, injury repair, and disease resistance processes. dUC-MSCs repair and regenerate the alveolar wall by enhancing adhesion to the damaged site. Therefore, they can contribute to the treatment of COPD and systemic diseases such as osteoporosis.

Optimization of protoplast isolation and subsequent regeneration from the economically important brown alga Ecklonia cava using response surface methodology

Ecklonia cava is an edible kelp species distributed in Korea and Japan with diverse uses in ecological restoration, traditional medicine, and the pharmaceutical and abalone industries. These features make E. cava a good candidate for cellular biotechnology research, which is often dependent on protoplasts. To date, however, there have been no studies that have focused on the isolation of protoplast from E. cava. In this study, we sought to optimize the yield of protoplasts from cultured young sporophytes of E. cava using commercial enzymes, with a particular focus on identifying the key conditions for achieving high protoplast yield, including enzyme concentration, chelation pre-treatment, growth, temperature, incubation time, pH, and osmolarity. Protoplast production conditions were modeled using response surface methodology (RSM) via Box–Behnken design (BBD), and the practical utility of these conditions was experimentally verified. We found that an enzyme composition of 1.67 % cellulase RS and 4 U mL−1 alginate lyase without chelation pre-treatment, at 1570 mOsm L−1 H2O and pH 6 produced the highest protoplast yield of 4.45 ± 2.16 × 107 protoplasts g−1 fresh weight when incubated at 20 °C for 4 h using young (2-week-old) cultures. Our data revealed a strong positive correlation between growth rate and protoplast yield, thereby indicating that growth rate could serve as an index for determining the optimal timing of protoplast isolation from cultured material. The optimized protocol resulted in protoplasts capable of cell wall formation, division, and regeneration. These findings indicate the efficacy of commercial enzymes in protoplast isolation and that BBD-mediated RSM is a useful approach for the production of viable protoplasts from kelp sporophytes.

Reconstruction pattern of the cell wall in Fagopyrum protoplast-derived hybrid cells

The cell wall rebuilding is one of the first stage of protoplast development that enables further mitotic divisions and differentiation. Therefore, this work focuses on the comparison of the cell wall regeneration in the parental protoplasts of Fagopyrum tataricum, F. esculentum and the F. tataricum (+) F. esculentum hybrids, which are promising materials in terms of future breeding and research programmes. It is worth emphasizing that the preparation of buckwheat hybrids using electrofusion was described for the first time. The results indicate that cell wall rebuilding exhibited a common mechanism for parent protoplasts and the heterokaryon as all analysed cell wall components recognising arabinogalactan proteins (JIM13, JIM16), extensin (JIM20), xyloglucan (LM25) and pectins (LM20, LM5, LM6) were detected during the process of wall regeneration. However, there were certainly differences in the spatio-temporal appearance or disappearance of individual epitopes during the 72 h of the cell culture, which have been discussed in the paper.

Design of a Stem Cell-Based Therapy for Ependymal Repair in Hydrocephalus Associated With Germinal Matrix Hemorrhages.

In preterm birth germinal matrix hemorrhages (GMHs) and the consequent posthemorrhagic hydrocephalus (PHH), the neuroepithelium/ependyma development is disrupted. This work is aimed to explore the possibilities of ependymal repair in GMH/PHH using a combination of neural stem cells, ependymal progenitors (EpPs), and mesenchymal stem cells. GMH/PHH was induced in 4-day-old mice using collagenase, blood, or blood serum injections. PHH severity was characterized 2 weeks later using magnetic resonance, immunofluorescence, and protein expression quantification with mass spectrometry. Ependymal restoration and wall regeneration after stem cell treatments were tested in vivo and in an ex vivo experimental approach using ventricular walls from mice developing moderate and severe GMH/PHH. The effect of the GMH environment on EpP differentiation was tested in vitro. Two-tailed Student t or Wilcoxon-Mann-Whitney U test was used to find differences between the treated and nontreated groups. ANOVA and Kruskal-Wallis tests were used to compare >2 groups with post hoc Tukey and Dunn multiple comparison tests, respectively. PHH severity was correlated with the extension of GMH and ependymal disruption (means, 88.22% severe versus 19.4% moderate). GMH/PHH hindered the survival rates of the transplanted neural stem cells/EpPs. New multiciliated ependymal cells could be generated from transplanted neural stem cells and more efficiently from EpPs (15% mean increase). Blood and TNFα (tumor necrosis factor alpha) negatively affected ciliogenesis in cells committed to ependyma differentiation (expressing Foxj1 [forkhead box J1] transcription factor). Pretreatment with mesenchymal stem cells improved the survival rates of EpPs and ependymal differentiation while reducing the edematous (means, 18% to 0.5% decrease in severe edema) and inflammatory conditions in the explants. The effectiveness of this therapeutical strategy was corroborated in vivo (means, 29% to 0% in severe edema). In GMH/PHH, the ependyma can be restored and edema decreased from either neural stem cell or EpP transplantation in vitro and in vivo. Mesenchymal stem cell pretreatment improved the success of the ependymal restoration.

Artificial Vasa‐Vasorum Serves as an On‐Site Regenerative Promoter of Cell‐Free Vascular Grafting

AbstractThe control paradigm of small vessel pathophysiology has changed to focus on the vascular out‐wall rather than the lumen‐intimal factors. As an emerging controller of the external wall, the microvasculature (“vasa vasorum”) provides interactional routes between the in‐and out‐sides of the vascular wall. Despite numerous approaches to developing small‐diameter vascular grafts, engineering artificial vasa vasorum (AVV) has not been projected as a multi‐functional solution to address long‐standing issues such as thrombotic and immune controls for wall regeneration. Here, the AVV is engineered using a microchannel network hydrogel after a multi‐study validation of implantation functions and then used to wrap the external wall of the cell‐free vessel post‐decellularization while preserving its mechanical properties. Upon inter‐positional and bypass grafting to rabbit arteries, the AVV graft facilitates the recruitment of vascular cells into the cell‐free wall by promoting invasion of angiogenic and vasculogenic cells through the microchannel‐mediated M2 polarization of macrophages. This function results in the efficient restoration of smooth muscle cells, and the revitalized vascular elasticity helps to maintain long‐term patency. The AVV, therefore, serves as an effective catalyst for vascular wall regeneration, offering a solution to clinically successful small‐diameter vascular grafting.

Effect of brassinosteroids on rooting of the ornamental deciduous shrubs

Brassinosteroids are a developing group of growth regulators. They are a group of steroid hormones involved in plants’ physiological and developmental processes. Among other things, they are responsible for cell wall regeneration or cell elongation. This experiment aimed to examine the effect of rooting stimulants on rhizogenesis in cuttings of two deciduous shrub species: Philadelphus ’Virginal’ and Hydrangea paniculata ’Limelight’. Aqueous solutions of indole-3-butyric acid (IBA) at 200 mg·L–1, Brassinolide (BL) at 0.05% and 24-epibrassinolide (24epiBL) (0.05%) were used in this study. The results obtained showed that both auxin and both of the brassinosteroids used increased the percentage of rooted cuttings almost twice, the degree of rooted cuttings and root length – for BL + IBA – longer roots than the control by 41% in jasmine and by 59% in hydrangea. The growth regulators applied during the rooting of cuttings also caused changes in the organic compound content of plant tissues and the activity of oxidative stress enzymes. The studies and results suggest that brassinosteroids may soon replace the popular rooting stimulants.

Phenotyping of single plant cells on a microfluidic cytometry platform with fluorescent, mechanical, and electrical modules.

Compared to animal cells, phenotypic characterization of single plant cells on microfluidic platforms is still rare. In this work, we collated population statistics on the morphological, biochemical, physical and electrical properties of Arabidopsis protoplasts under different external and internal conditions, using progressively improved microfluidic platforms. First, we analyzed the different effects of three phytohormones (auxin, cytokinin and gibberellin) on the primary cell wall (PCW) regeneration process using a microfluidic flow cytometry platform equipped with a single-channel fluorescence sensor. Second, we correlated the intracellular reactive oxygen species (ROS) level induced by heavy metal stress with the concurrent PCW regeneration process by using a dual-channel fluorescence sensor. Third, by integrating contraction channels, we were able to effectively discriminate variations in cell size while monitoring the intensity of intracellular ROS signaling. Fourth, by combining an electrical impedance electrode with the contraction channel, we analyzed the differences in electrical and mechanical properties of wild-type and mutant plant cells before and after primary cell wall regeneration. Overall, our work demonstrates the feasibility and sensitivity of microfluidic flow cytometry in high-throughput phenotyping of plant cells and provides a reference for assessing metabolic and physiological indicators of individual plant cells in multiple dimensions.

Transcriptome analysis discloses antioxidant detoxification mechanism of Gracilaria bailinae under different cadmium concentrations and stress durations.

To remedy Cd pollution in the ocean, macroalgae are used as a bioremediation tool because of their ability to absorb and accumulate Cd. Gracilaria bailinae has high economic and ecological value and can survive in Cd contaminated waters; however, the underlying molecular mechanisms remain unclear. In this study, physiological and biochemical indexes were analyzed after 1, 3, 5, or 7 days of Cd2+ exposure; further, the transcriptome of G. bailinae was examined after a 7-day exposure to a Cd2+ culture environment with Cd levels of 0 mg L-1 (cd1, control), 1 mg L-1 (cd2, low concentration), and 2.5 mg L-1 (cd3, high concentration). The results showed that in the cd2 group, G. bailinae maintained a stable RGR that did not differ significantly (P > 0.05) from that of the cd1 group. However, the soluble protein and MDA contents, as well as the activities of SOD, CAT and POD, were significantly increased (P< 0.05) compared to the cd1 group. No significant differences (P > 0.05) were found among the different Cd2+ stress durations. In contrast, compared with the cd1 group, the RGR, soluble protein content, SOD, CAT, and POD activities were significantly decreased (P< 0.05), while the MDA content was significantly increased (P< 0.05) in the cd3 group. Furthermore, significant differences (P< 0.05) were observed among the various tested Cd2+ stress durations within the cd3 group. Compared to the cd1 group, a total of 30,072 DEGs and 21,680 were identified in the cd2 and cd3 treatments, respectively. More up-regulated genes were found in cd2 group than in cd3 group. GO enrichment analysis showed that these genes were related to peptidase activity, endopeptidase activity, ion transport, peptide biosynthetic and metabolism. In addition, DEGs related to histidine metabolism and the stilbene, diarylheptane, and gingerol pathways were significantly up-regulated in the cd2 group compared to the cd3 group, which resulted in enhanced activities of antioxidant enzymes and promoted cell wall regeneration. The results of this study reveal the response mechanism of G. bailinae to Cd2+ stress, providing valuable insights for assessing the bioremediation potential of G. bailinae for Cd-contaminated waters.

Postoperative challenges in pedicled buccal fat pad grafts: MRI evaluation and the role of bone grafting for maxillary wall regeneration

Postoperative challenges in pedicled buccal fat pad grafts: MRI evaluation and the role of bone grafting for maxillary wall regeneration

Transcriptomic analysis reveals the early body wall regeneration mechanism of the sea cucumber Holothuria leucospilota after artificially induced transverse fission

BackgroundSea cucumbers exhibit a remarkable ability to regenerate damaged or lost tissues and organs, making them an outstanding model system for investigating processes and mechanisms of regeneration. They can also reproduce asexually by transverse fission, whereby the anterior and posterior bodies can regenerate independently. Despite the recent focus on intestinal regeneration, the molecular mechanisms underlying body wall regeneration in sea cucumbers still remain unclear.ResultsIn this study, transverse fission was induced in the tropical sea cucumber, Holothuria leucospilota, through constrainment using rubber bands. Histological examination revealed the degradation and loosening of collagen fibers on day-3, followed by increased density but disorganization of the connective tissue on day-7 of regeneration. An Illumina transcriptome analysis was performed on the H. leucospilota at 0-, 3- and 7-days after artificially induced fission. The differential expression genes were classified and enriched by GO terms and KEGG database, respectively. An upregulation of genes associated with extracellular matrix remodeling was observed, while a downregulation of pluripotency factors Myc, Klf2 and Oct1 was detected, although Sox2 showed an upregulation in expression. In addition, this study also identified progressively declining expression of transcription factors in the Wnt, Hippo, TGF-β, and MAPK signaling pathways. Moreover, changes in genes related to development, stress response, apoptosis, and cytoskeleton formation were observed. The localization of the related genes was further confirmed through in situ hybridization.ConclusionThe early regeneration of H. leucospilota body wall is associated with the degradation and subsequent reconstruction of the extracellular matrix. Pluripotency factors participate in the regenerative process. Multiple transcription factors involved in regulating cell proliferation were found to be gradually downregulated, indicating reduced cell proliferation. Moreover, genes related to development, stress response, apoptosis, and cell cytoskeleton formation were also involved in this process. Overall, this study provides new insights into the mechanisms of whole-body regeneration and uncover potential cross-species regenerative-related genes.

A proxitome-RNA-capture approach reveals that processing bodies repress coregulated hub genes.

Cellular condensates are usually ribonucleoprotein assemblies with liquid- or solid-like properties. Because these subcellular structures lack a delineating membrane, determining their compositions is difficult. Here we describe a proximity-biotinylation approach for capturing the RNAs of the condensates known as processing bodies (PBs) in Arabidopsis (Arabidopsis thaliana). By combining this approach with RNA detection, in silico, and high-resolution imaging approaches, we studied PBs under normal conditions and heat stress. PBs showed a much more dynamic RNA composition than the total transcriptome. RNAs involved in cell wall development and regeneration, plant hormonal signaling, secondary metabolism/defense, and RNA metabolism were enriched in PBs. RNA-binding proteins and the liquidity of PBs modulated RNA recruitment, while RNAs were frequently recruited together with their encoded proteins. In PBs, RNAs follow distinct fates: in small liquid-like PBs, RNAs get degraded while in more solid-like larger ones, they are stored. PB properties can be regulated by the actin-polymerizing SCAR (suppressor of the cyclic AMP)-WAVE (WASP family verprolin homologous) complex. SCAR/WAVE modulates the shuttling of RNAs between PBs and the translational machinery, thereby adjusting ethylene signaling. In summary, we provide an approach to identify RNAs in condensates that allowed us to reveal a mechanism for regulating RNA fate.

Porous gelatin microspheres implanted with adipose mesenchymal stromal cells promote angiogenesis via protein kinase B/endothelial nitric oxide synthase signaling pathway in bladder reconstruction

Background aimsCell failure and angiogenesis are the key to bladder wall regeneration. Three-dimensional (3D) culture using porous gelatin microspheres (GMs) as a vehicle promotes stem cell proliferation and improves the paracrine capacity of cells. This study aimed to evaluate the therapeutic potential of GMs constructed from adipose-derived mesenchymal stromal cells (ADSCs) (ADSC-GMs) combined with bladder acellular matrix (BAM) in tissue-engineered bladders. MethodsIsolation of ADSCs, flow cytometry, scanning electron microscopy and cell counting kit-8, β-galactosidase and enzyme-linked immunosorbent assays were performed in vitro to compare two-dimensional (2D) and 3D cultures. In the in vivo study, male Sprague–Dawley rats were randomly divided into three groups: the BAM replacement alone (BAM) group, ADSCs grown on BAM in replacement (ADSC) group and ADSC-GMs combined with BAM followed by replacement (ADSC-GM) group. Bladder function assessed by urodynamics after 12 weeks of bladder replacement, and the rats were sacrificed at 4 and 12 weeks for further experiments. ResultsThe in vitro results showed that GM culture promoted ADSC proliferation, inhibited apoptosis and delayed senescence compared with those in the 2D culture. In addition, ADSC-GMs increased the secretion of the angiogenic factors vascular endothelial growth factor, platelet-derived growth factor-BB, and basal fibroblast growth factor. In vivo experiments revealed that ADSC-GMs adhered to the BAM for longer than ADSCs. Moreover, ADSC-GMs significantly promoted the regeneration of bladder vessels and smooth muscle, thereby facilitating the recovery of bladder function. The expression of phosphorylated protein kinase B (AKT) and phosphorylated endothelial nitric oxide synthase (eNOS) was significantly greater in the ADSC-GMs group compared with the BAM and ADSCs groups. ConclusionsADSC-GMs increased retention of ADSCs on the BAM, thereby promoting the regeneration and functional recovery of the bladder tissue. ADSC-GMs promoted angiogenesis by activating the AKT/eNOS pathway.

Cobweb-Inspired Micro/Nanostructured Scaffolds for Soft Tissue Regeneration with Inhibition Effect of Fibrosis under Dynamic Environment.

In soft tissue repair, fibrosis can lead to repair failure and long-term chronic pain in patients. Excessive mechanical stimulation of fibroblasts is one of the causes of fibrosis during abdominal wall regeneration. Inspired by the cobweb, a polycaprolactone beaded fiber is prepared by electrospinning. The cobweb-inspired structure attenuates the mechanical stimulation of cells under a dynamic environment. Nano-protrusions are introduced into the scaffold for further inhibition of fibrosis by self-induced crystallization. A machine is built for in vitro dynamic culture and rat abdominal subcutaneous embedding experiments are performed to verify the inhibiting effect of fibrosis in a dynamic environment in vivo. Results show that the expression of integrin β1 and α-smooth muscle actin is inhibited by the cobweb-inspired structure under dynamic culture. The results of hematoxylin and eosin and Masson's trichrome indicate that the cobweb-inspired structure has a good inhibitory effect on fibrosis in a dynamic environment in vivo. In general, the cobweb-inspired scaffold with nano-protrusions has a good ability to inhibit fibrosis under both static and dynamic environments. It is believed that the scaffold has promising applications in the field of inhibiting fibrosis caused by mechanical stimulation.

The delaying effect of a novel polyethylene nanopackaging on postharvest stipe elongation of Flammulina velutipes and its mechanism analysis

The stipe elongation is a typical characteristic of quality deterioration of postharvest Flammulina velutipes. We explored the delaying effect of a novel polyethylene nanopackaging (PENP) on stipe elongation in F. velutipes during storage and the underlying mechanism. The changes in quality, physical and chemical properties, and gene expression of F. velutipes in PENP during 18-day storage at low temperature were analyzed by morphological observation and physiological, biochemical, and transcriptomic methods. The results showed that PENP treatment could reduce the respiration of F. velutipes by maintaining higher CO2 and lower O2 content, decrease the stipe elongation rate and keep the postharvest storage quality of F. velutipes. PENP also inhibited the increase in chitin and β-glucan content, the main components of the cell wall of F. velutipes, maintaining sufficient ATP content and energy charge (EC) values inside the stipe. Transcriptome analysis showed that PENP inhibited cell wall regeneration by down-regulating genes related to chitin degradation (Unigene0001917, Unigene0018811 and Unigene0007053) and β-glucan degradation (Unigene0010562 and Unigene0010561), thus delaying stipe elongation. During the early stage of storage, PENP also inhibited energy metabolism by down-regulating succinate dehydrogenase (SDH), cytochrome c oxidase (CCO), and F1F0-ATPase-related genes involved in the oxidative phosphorylation pathway. In summary, PENP delayed postharvest stipe elongation of F. velutipes by inhibiting the synthesis of chitin and glucan in the cell wall and maintaining low energy metabolism in the stipe cells during early storage.

Galactoglucomannan oligosaccharides mitigate cadmium toxicity in maize protoplasts by improving viability and cell wall regeneration

To avoid human health endangerment via the food chain, the investigation of Cd's effects on plant growth and development, and the discovery of various compounds that would mitigate the toxic effects of Cd, are essential. Galactoglucomannan oligosaccharides (GGMOs) are biologically active compounds, which improve the growth and development of plants. Therefore, the impact of GGMOs on the mitigation of Cd toxicity on maize (Zea mays L.) protoplasts was the main objective of this research. Here, protoplast viability, de novo cell wall regeneration on protoplasts' surface and Cd-uptake by protoplasts were studied. To study the influence of different treatments over time, the protoplasts were sampled on various days during the 14-day-long cultivation. The medium containing 2,4-dichlorophenoxyacetic acid, 6-benzylaminopurine, and GGMOs in a 10−9 M concentration with a pH of 3.8 was found to be optimal for protoplast cultivation. The toxic effect of Cd2+, which was evident already on the 2nd day of cultivation, resulted in decreased protoplast viability, the de novo cell wall regeneration, and in increased Cd-uptake. However, the application of GGMOs on Cd-stressed protoplasts increased cell wall regeneration. Fully or partly regenerated cell walls decreased the uptake of Cd2+ through the plasma membrane and improved protoplast viability. This is the first study that confirmed that biologically active oligosaccharides promote cell wall regeneration on the protoplast surface in both non-stress and Cd-stress conditions.

Engineering and characterization of carbohydrate-binding modules for imaging cellulose fibrils biosynthesis in plant protoplasts.

Carbohydrate binding modules (CBMs) are noncatalytic domains that assist tethered catalytic domains in substrate targeting. CBMs have therefore been used to visualize distinct polysaccharides present in the cell wall of plant cells and tissues. However, most previous studies provide a qualitative analysis of CBM-polysaccharide interactions, with limited characterization of engineered tandem CBM designs for recognizing polysaccharides like cellulose and limited application of CBM-based probes to visualize cellulose fibrils synthesis in model plant protoplasts with regenerating cell walls. Here, we examine the dynamic interactions of engineered type-A CBMs from families 3a and 64 with crystalline cellulose-I and phosphoric acid swollen cellulose. We generated tandem CBM designs to determine various characteristic properties including binding reversibility toward cellulose-I using equilibrium binding assays. To compute the adsorption (nkon ) and desorption (koff ) rate constants of single versus tandem CBM designs toward nanocrystalline cellulose, we employed dynamic kinetic binding assays using quartz crystal microbalance with dissipation. Our results indicate that tandem CBM3a exhibited the highest adsorption rate to cellulose and displayed reversible binding to both crystalline/amorphous cellulose, unlike other CBM designs, making tandem CBM3a better suited for live plant cell wall biosynthesis imaging applications. We used several engineered CBMs to visualize Arabidopsis thaliana protoplasts with regenerated cell walls using confocal laser scanning microscopy and wide-field fluorescence microscopy. Lastly, we also demonstrated how CBMs as probe reagents can enable in situ visualization of cellulose fibrils during cell wall regeneration in Arabidopsis protoplasts.

Nondestructive and Quantitative Analysis of Cell Wall Regeneration in the Medicinal Macrofungus Ganoderma lingzhi by a Membrane-Fusing Fluorescent Probe.

Ganoderma is a prize medicinal macrofungus with a broad range of pharmaceutical values. To date, various attempts have been made to cultivate Ganoderma to improve the production of secondary metabolites with pharmacological activity. Among the adopted techniques, protoplast preparation and regeneration are indispensable. However, the evaluation of protoplasts and regenerated cell walls usually relies on electron microscopy assays, which require time-consuming and destructive sample preparation and merely provide localized information in the selected area. In contrast, fluorescence assays enable sensitive real-time detection and imaging in vivo. They can also be applied to flow cytometry, providing a collective overview of every cell in a sample. However, for macrofungi such as Ganoderma, the fluorescence analysis of protoplasts and regenerated cell walls is difficult owing to the hindrance of the homologous fluorescent protein expression and the lack of an appropriate fluorescence marker. Herein, a specific plasma membrane probe, TAMRA perfluorocarbon nucleic acid probe (TPFN), is proposed for the nondestructive and quantitative fluorescence analysis of cell wall regeneration. Exploiting the perfluorocarbon membrane-anchoring chains, hydrophilic nucleic acid linker, and fluorescent dye TAMRA, the probe is proven to be selective, soluble, and stable, enabling rapid fluorescence detection of a protoplast sample free of transgenic expression or immune staining. Based on the TPFN and flow cytometry techniques, a quantitative approach is constructed to monitor the process of cell wall growth in a fast, quantitative, and high-throughout manner, and the obtained results are consistent with those of conventional electron microscopy. In principle, with slight modifications or integration, the proposed probe and approach can be adapted to the preparation of cell protoplasts, inspection of cell wall integrity under environmental stress, and programmable membrane engineering for cytobiology and physiology research.