Wall-mounted Unit Research Articles

DECREASING ELECTRICAL ENERGY COST AND INDIRECT CO2 EMISSIONS OF AN AIR CONDITIONING UNIT AFTER PREVENTIVE MAINTENANCE

During the summer season in subtropical countries and the dry season in tropical countries, air temperature is high. To adapt this condition, an air conditioning (AC) unit is used. The air conditioning use, however, increases the electrical energy consumption which contributes to the increase of indirect CO2 emissions. For many buildings, a monthly electrical energy cost from the use of AC system can contribute up to 40% of a monthly utility expenditure. It is then a great motivation to decrease electrical energy consumption of the AC unit. In this work, an adaptable preventive maintenance for an AC unit shows an acceptable level of electrical energy decrease. An experiment was performed for 2 AC types. The first one is a wall mounted unit with a cooling capacity of 9,300 BTUH. The second unit is a split duct unit with a cooling capacity of 48,000 BTUH. The cleaning of evaporator in the wall-mounted AC unit decreased the hourly electrical energy consumption by 4.1% from 810 to 777 Watt-hour. In addition, cleaning of condenser for the similar AC unit decreased the electrical energy consumption by 6.2% from 810 to 760 Watt-hour. Meanwhile, the evaporator cleaning for a 48,000 split duct AC decreased the hourly electrical energy consumption by 2.4% from 4.64 to 4.53 kWh and cleaning of condenser decreased the energy consumption by 5.4% from 4.64 to 4.39 kWh. If this electrical energy decrease could be scaled up to the global energy consumption from the air conditioning use, this should be a significant decrease of the global energy consumption and the correlated indirect CO2 emissions from the air conditioning sector.

Performance of all-air wall induction unit for displacement ventilation in a four-bed hospital ward during the cooling period

The existing induction air-conditioning system faces ventilation shortcomings and condensation risks. We developed an all-air wall induction air terminal unit (wall IU) that doesn't require reheating and eliminates water pipes to address condensation. Moreover, with modifications to its supply method, it can achieve displacement ventilation (DV) in an adiabatic environment. However, the real-world performance of this system needs to be further confirmed. This study examines wall IU performance during the cooling period. A full-scale experiment was conducted in a room furnished as a four-bed hospital ward with an outdoor climate chamber (OCC) to simulate summer conditions. IU's cooling and ventilation performance was evaluated by examining steady-state temperatures and tracer gas distributions. Moreover, CFD simulations to reproduce the experiment were performed to supplement the results. Patients' thermal comfort and infection risk while cohabiting with an infected individual were estimated using detailed temperature, airflow, and concentration data from an experiment-based CFD analysis. Furthermore, the DV stratification height under various perimeter heat loads and performance comparison between wall and ceiling-mounted induction units were also studied. In conclusion, the wall IU improved ventilation efficiency by achieving DV under cooling supply conditions. Satisfied thermal comfort is ensured based on ADPI and DR evaluation. DV's stratification height can be kept high enough under a 20 °C equivalent temperature difference when using a single glass window or more after thermal insulation enhancement. Compared with ceiling-mounted induction units, wall-mounted units can reduce infection risk by more than double while making cold drafts less noticeable.

Protocol for Evaluating the Microbial Inactivation of Commercial UV Devices on Plastic Surfaces.

With the plethora of commercially available UV-C devices exhibiting different intensity and lifespans, it is critical to consumer safety that companies verify and clearly communicate the efficacy of their devices as per the intended use. The purpose of this study was to define a low-cost protocol for investigating the antimicrobial efficacy of commercial UV devices for industry use. The tested devices included: a wall-mounted unit (Device A), a troffer unit (Device B), and an induction lamp unit (Device C). The devices were installed within an enclosed tower to prevent the transmission of UV-C radiation outside of the testing area. The procedure details determining the devices′ antimicrobial efficacy using plastic coupons inoculated with Escherichia coli or Staphylococcus aureus. The protocol includes suggested time–distance treatments according to the potential application of each device type and reports the results as log CFU/mL reduction or percent reduction.

Image quality of a portable X-ray device (Nomad Pro 2) compared to a wall-mounted device in intraoral radiography

ObjectivesThe aim of this study was to determine whether a handheld (HH) X-ray device (Nomad Pro 2) is capable of producing equivalent or even superior X-ray image quality in comparison to a wall-mounted (WM) dental X-ray unit (Heliodent Plus) on the basis of objectifiable image quality parameters.MethodsAnatomical, radiological and biological dental X-ray image quality parameters of a handheld dental X-ray device (Nomad Pro 2, Kavo Kerr, Biberach, Germany) were compared to a standard wall-mounted dental X-ray unit (Heliodent Plus, Sirona Dental Systems, Bensheim, Germany) using a maxillofacial phantom. In addition, the effect of different operators (dentists, dental students, dental assistants) on the dental X-ray image quality was measured.ResultsHH and WM devices showed comparable image quality for anterior teeth, premolars, molars and bitewing images. During the two-month investigational period, the radiation exposure level for the operator of the Nomad Pro 2 was 0.1 mSv for 203 images. Dentists as the highest trained personnel enrolled in the study achieved better image quality with the Nomad Pro 2 as compared to dental students and dental assistants, especially in the molar region.ConclusionsA HH device delivers a comparable image quality to a WM device. In addition, there seem to be short learning curves with regard to image acquisition when using a handheld device, which is further minimised by the previous training of the operating personnel. HH dental X-ray devices, such as the Nomad Pro 2 are a promising adjunct for dental radiology in cases where WM units are of limited practicability.

Harm's Way

This article reviews how engineering software and microtechnology prepare defense against bioterrorism. Researchers at government-associated labs across the nation are quietly working on the best ways to swiftly ready emergency responders in the event of a bioterrorism attack and to deal with the repercussions hours and days after the dreaded event. Over at Sandia National Laboratories, researchers have created a small, wall-mounted unit powered by a microchip that continuously monitors the surrounding air to check for harmful biological agents. Lab-on-a-chip technology performs analyses in a fraction of a minute that would take hours with traditional laboratory methods. Sandia researchers, with funding from the Department of Defense, seek to perfect a similar wall-mounted unit so it could one day be hung in a subway station or in another public area. The unit would while away the day collecting air samples and analyzing them.

Four-Dimensional Holograms from Time-Lapse Cinematography

Abstract New techniques in holography allow standard motion picture film to be converted to holograms that are visible with standard light sources. Time-lapse photographs of clouds have been converted to two types of holograms. One hologram was made from film taken by a camera at the ground. and shows, in a wall-mounted unit, cloud growth and movement. The other was made from film taken by an aircraft side camera during a cloud circumnavigation, and displays the four-dimensional structure of a cumulonimbus in circular hologram. The potential is described for similar products to be derived from other data sources relevant to meteorology.