Volume Phase Holographic Grisms Research Articles

Cryogenic Volume-Phase Holographic Grisms for MOIRCS

We have developed high-dispersion VPH (volume phase holographic) grisms with zinc selenide (ZnSe) prisms for the cryogenic optical system of MOIRCS (Multi-Object near-InfraRed Camera and Spectrograph) for Y-, J-, H-, and K-band observations. We fabricated VPH gratings using a hologram resin. After several heat cycles at between room temperature and 120 K, the VPH gratings were assembled to grisms by gluing with two ZnSe prisms. Several heat cycles were also carried out for the grisms before being installed into MOIRCS. We measured the efficiencies of the VPH grisms in a laboratory, and found them to be 70%–82%. The performances obtained by observations of MOIRCS with the 8.2 m Subaru Telescope have been found to be very consistent with the results in the laboratory test. This is the first astronomical application of cryogenic VPH grisms.

Fabrication of Near-Infrared Volume Phase Holographic Grism with High Efficiency and High Dispersion, and Its Application to a Wavelength De-multiplexing Device

We designed and developed a volume phase holographic (VPH) grism with high resolution and high efficiency in the near-infrared light domain (1550 nm) to be applied as a wavelength de-multiplexing device of a photonic network. In order to achieve both diffraction efficiency of over 80% and wavelength resolution of 0.08 nm, we newly designed and fabricated a VPH grism with high efficiency and high wavelength resolution in near-infrared wavelength region by sandwiching a VPH grating between prisms. An active feedback control technique was introduced to a two-beam interference exposure system, and we also applied it to a wavelength de-multiplexing device for a photonic network. Consequently, a VPH grism was successfully fabricated with diffraction efficiency of over 80% by employing the Bragg condition of 1550 nm at the incident wavelength from 1530 to 1570 nm, and high refractive index modulation of 0.047 was confirmed.