Visible Range Research Articles

Effects of oxygen vacancies on the structural, electronic, and optical properties of the photocatalytic InTaO4 compound

We conducted first-principles calculations based on density functional theory to investigate the impact of the oxygen vacancies on the structural, electronic, and optical properties of the InTaO4 compound. The latter is a famous photocatalytic semiconductor with its optical absorption in the visible range being an object of controversial interpretations. The presence of two types of isolated oxygen vacancies, O1 and O2, occupying 4g(1) and 4g(2) Wyckoff positions respectively, has been simulated within the frame of the supercell approach. Electronic structure and optical absorption (OA) have been calculated using the Becke-Johnson exchange-correlation potential. It is found that the presence of both types of vacancies generates defect states (DS) inside the band gap, primarily involving In-6s and O-2p states. The calculated valence-to-conduction-band band gap (4.25 eV) and DS-to-conduction-band band gap (2.5 eV) closely align with the experimentally determined OA edges for two onsets of InTaO4 absorption. The analysis of the calculated OA spectra leads to the conclusion that only O1 vacancy-induced absorption is consistent with the experimental OA, while O2 vacancy-induced absorption appears absent. This discrepancy probably arises from a higher concentration of O1 vacancies formed during crystal growth, attributed to the fact that the calculated defect formation energy of O1 vacancy is 0.258 eV lower compared to O2 vacancy. Consequently, the photocatalytic activity of InTaO4 is ascribed to intrinsic defects, primarily O1-type vacancies, though the influence of other defects cannot be entirely ruled out.

Huge redshift of absorption edge in a novel Z-type Bi2Sn2O7/α-Bi2O3 junction for highly efficiently visible light degradation of norfloxacin and bisphenol AF

Heterojunction was mainly used to realize the separation of charge carrier in current studies, but it did not bring about any other effect. In this paper, Bi2Sn2O7 was introduced into α-Bi2O3 to construct a direct Z-type Bi2Sn2O7/α-Bi2O3 heterojunction. It not only accelerated the rapid separation of electrons and holes, but also induced a huge redshift of absorption edge to enlarge the visible light absorption range. Such result led into the optimal sample being able to degrade 95% of norfloxacin and 92% of bisphenol AF for 90min of visible light irradiation. Under the same testing conditions, the removal efficiency of these two pollutants in the drinking water also attained 94% and 90% to demonstrate a good application. Moreover, the cycling test results indicated that the Bi2Sn2O7/α-Bi2O3 could be sustainably utilized. The electrons, holes, superoxide radical (•O2-) and hydroxyl radical (•OH) were the active substances in the process of degradation. The numbers of the Escherichia coli were 0.69×106 CFU/mL and 0.75×106 CFU/mL in the solutions after degradation to denote non-toxicity of the final products. Thus the Bi2Sn2O7/α-Bi2O3 composite could be applied in purification of various waste waters.

High transmittance BiVO4 thin-film photoanodes by reactive magnetron sputtering for a photovoltaic-photoelectrocatalysis water splitting system

As the system with the highest solar hydrogen conversion efficiency, the further improvement of photovoltaic-photoelectrocatalysis (PV-PEC) efficiency is dependent on the light transmittance, activity and stability of the photoanode. Here, a highly permeable BiVO4 thin film was fabricated through controlled magnetron sputtering. The thickness of the thin film was merely 345 nm, while its transmittance in the visible light range reached as high as 70%. Moreover, large-scale production of such films could be achieved. By incorporating NiFeOx oxygen extraction cocatalyst, under AM 1.5G illumination, the photocurrent density at 1.23 V on reversible hydrogen electrode (RHE) increased to 4.2 mA cm–2 and the incident photon-current conversion efficiency reached 70%. A PV-PEC system was designed to efficiently harness sunlight by integrating the photoanode with a solar photovoltaic panel. Upon connection with the solar photovoltaic panel (with an efficiency of only 7%), spontaneous water decomposition could be achieved, resulting in a solar-to-hydrogen conversion efficiency (ηSTH) of 4.2% for the series system. This study contributes to the realization of cost-effective and highly efficient PV-PEC hydrogen production.

Efficacy of Morning Shorter Wavelength Lighting in the Visible (Blue) Range and Broad-Spectrum or Blue-Enriched Bright White Light in Regulating Sleep, Mood, and Fatigue in Traumatic Brain Injury: A Systematic Review

Traumatic brain injury (TBI) profoundly affects sleep, mood, and fatigue, impeding daily functioning and recovery. This systematic review evaluates the efficacy of morning shorter wavelength lighting in the visible (blue) range and broad-spectrum or blue-enriched bright white light exposure in mitigating these challenges among TBI patients. Through electronic database searches up to May 2023, studies assessing sleep, circadian rhythm, sleepiness, mood, and fatigue outcomes in TBI patients exposed to morning shorter wavelength lighting in the visible (blue) range and broad-spectrum or blue-enriched bright white light were identified. Seven studies involving 309 participants met the inclusion criteria. Results indicated consistent advancement in sleep timing among individuals with mild TBI, alongside improvements in total sleep time, mood, and reduced sleepiness with both types of light exposure, particularly in mild TBI cases. Notably, two studies demonstrated alleviation of fatigue exclusively in severe TBI cases following light exposure. Despite promising findings, evidence remains limited, emphasizing the need for future research with standardized protocols to confirm the potential and optimize the benefits of light therapy for TBI recovery.

Photoelectrochemical properties of doped TiO2 nanowires grown by seed-assisted thermal oxidation

AbstractTitanium dioxide Nanowires (NWs) are particularly interesting because of their very high surface/volume ratio and their photocatalytic activity allows them to be used in a myriad of applications. This manuscript presents a study of nanowires grown on a conductive substrate making use of a seed-assisted thermal oxidation process. To obtain doped NWs, before the oxidation, metallic titanium was doped with Fe (or Cr) by ion implantation technology. Analyses showed good quality Rutile phase and light absorption in the visible range. Transport properties of the NWs/electrolyte junction were investigated by using linear sweep voltammetry and electrochemical impedance spectroscopy. They allowed us to measure the photovoltage and the barrier height of the junction. We also evaluated the density of hole trap states at the interface during illumination. Electrical results indicate that the formation of deep levels, induced by doping, influences the electron concentration in the TiO2 and the transport properties. Graphical abstract

Structural Colored Based Humidity Sensor Consisting of High Resolution 3D Printed Photonic Crystal Coated with Ultrathin Responsive Hydrogels.

Today, humidity sensors have become an integral part of the daily lives. In particular, humidity sensors using an electronic measuring principle have become the standard. Although these sensors have proven to be a stable measurement method, they have some disadvantages, such as their long response time or the danger of using them in explosiveenvironments. This work introduces photonic crystals as an alternative optical measurement approach. The novel technology of ultra-fast two-photon polymerisation printing is combined with a thin-film deposition process, namely iCVD. This allows to print large area high-precision 3D templates, which are subsequently coated with a humidity responsive hydrogel thin film (p(HEMA) of 20nm.The limits of 2PP technology are being pushed allowing the production ofs table and periodic large-area 3D structures. The flexible customization of hydrogels for ambient conditions make them exceptionally promising for a wide range of sensing applications. Additionally, optical methods for measuring humidity seem to be an excellent alternative to overcome the limitations for current state of the art humidity sensors. The optical detection of changes in ambient air humidity is achieved by observing color changes of the printed structure within the visible wavelength range.

Waveguide-Coupled Light Photodetector Based on Two-Dimensional Molybdenum Disulfide.

The integration of transition metal dichalcogenides with photonic structures such as sol-gel SiOx:TiOy optical waveguides (WGs) makes possible the fabrication of photonic devices with the desired characteristics in the visible spectral range. In this study, we propose and experimentally demonstrate a MoS2-based photodetector integrated with a sol-gel SiOx:TiOy WG. Based on the spectroscopic measurements performed for our device, we concluded that the light entering the WG is almost completely channeled out from the WG and absorbed by the MoS2 flake, which is deposited on the WG. Therefore, this device works as a photodetector. The light coupling into the MoS2 region in this device construction is due to the high contrast of refractive index between the van der Waals crystal and the sol-gel WG, which is ∼4 and ∼1.8, respectively. The obtained MoS2-based photodetectors exhibit a photoresponsivity of 0.3 A W-1 (n-type MoS2) and 7.53 mA W-1 (p-type MoS2) at a bias voltage of 2 V. These results reveal great potential in the integration of sol-gel WGs with van der Waals crystals in optoelectronic applications.

2D–3D heterostructure of PtS2−x /Ga2O3 and their band alignment studies for high performance and broadband photodetector

For deep ultraviolet (UV-C) photodetectors, gallium oxide (Ga2O3) is a suitable candidate owing to its intrinsic ultra-wide band gap and high stability. However, its detection is limited within the UV-C region, which restricts it to cover a broad range, especially in visible and near-infrared (NIR) region. Therefore, constructing a heterostructure of Ga2O3 with an appropriate material having a narrow band gap is a worthwhile approach to compensate for it. In this category, PtS2 group-10 transitional metal dichalcogenide stands at the top owing to its narrow band gap (0.25–1.65 eV), high mobility, and stability for heterostructure synthesis. Moreover, heterostructure with Ga2O3 sensing in UV and PtS2 broad response in visible and IR range can broaden the spectrum from UV to NIR and to build broadband photodetector. In this work, we fabricated a 2D–3D PtS2−x /Ga2O3 heterostructure based broadband photodetector with detection from UV-C to NIR region. In addition, the PtS2−x /Ga2O3 device shows a high responsivity of 38.7 AW−1 and detectivity of 4.8 × 1013 Jones under 1100 nm light illumination at 5 V bias. A fast response of 90 ms/86 ms illustrates the device’s fast speed. An interface study between the PtS2−x and Ga2O3 was conducted using x-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy (UPS) which confirmed type-I band alignment. Finally, based on their band alignment study, a carrier transport mechanism was proposed at the interface. This work offers a new opportunity to fabricate large-area high-performance 2D–3D heterostructures based photodetectors for future optoelectronics devices.

A Novel Multi-camera Fusion Approach at Plant Scale: From 2D to 3D

Non-invasive crop phenotyping is essential for crop modeling, which relies on image processing techniques. This research presents a plant-scale vision system that can acquire multispectral plant data in agricultural fields. This paper proposes a sensory fusion method that uses three cameras, Two multispectral and a RGB depth camera. The sensory fusion method applies pattern recognition and statistical optimization to produce a single multispectral 3D image that combines thermal and near-infrared (NIR) images from crops. A multi-camera sensory fusion method incorporates five multispectral bands: three from the visible range and two from the non-visible range, namely NIR and mid-infrared. The object recognition method examines about 7000 features in each image and runs only once during calibration. The outcome of the sensory fusion process is a homographic transformation model that integrates multispectral and RGB data into a coherent 3D representation. This approach can handle occlusions, allowing an accurate extraction of crop features. The result is a 3D point cloud that contains thermal and NIR multispectral data that were initially obtained separately in 2D.

Knowing the spectral directional emissivity of 316L and AlSi10Mg PBF-LB/M surfaces: gamechanger for quantitative in situ monitoring

AbstractFor a deep process understanding of the laser powder bed fusion process (PBF-LB/M), recording of the occurring surface temperatures is of utmost interest and would help to pave the way for reliable process monitoring and quality assurance. A notable number of approaches for in-process monitoring of the PBF-LB/M process focus on the monitoring of thermal process signatures. However, due to the elaborate calibration effort and the lack of knowledge about the occurring spectral directional emissivity $${{\varepsilon }^{\prime}}_{\lambda }$$ ε ′ λ , only a few approaches attempt to measure real temperatures. In this study, to gain initial insights into $${{\varepsilon }^{\prime}}_{\lambda }$$ ε ′ λ occurring in the PBF-LB/M process, measurements on PBF-LB/M specimens and metal powder specimens were performed for higher temperatures up to T = 1290 °C by means of the emissivity measurement apparatus (EMMA) of the Center for Applied Energy Research (CAE, Wuerzburg, Germany). Also, measurements at ambient temperatures were performed with a suitable measurement setup. Two different materials—stainless steel 316L and aluminum AlSi10Mg—were examined. The investigated wavelength λ ranges from the visible range ($${\lambda }_{VIS}$$ λ VIS = 0.40–0.75 µm) up to the infrared, λ = 20 µm. The influence of the following factors were investigated: azimuth angle φ, specimen temperature TS, surface texture as for PBF-LB/M surfaces with different scan angles α, and powder surfaces with different layer thicknesses $$t$$ t .

Considerable Piezochromism in All‐Inorganic Zero‐Dimensional Perovskite Nanocrystals via Pressure‐Modulated Self‐Trapped Exciton Emission

AbstractPiezochromic materials refer to a class of matters that alter their photoluminescence (PL) colors in response to the external stimuli, which exhibit promising smart applications in anti‐counterfeiting, optoelectronic memory and pressure‐sensing. However, so far, most reported piezochromic materials have been confined to organic materials or hybrid materials containing organic moieties with limited piezochromic range of less than 100 nm in visible region. Here, we achieved an intriguing piezochromism in all‐inorganic zero‐dimensional (0D) Cs3Cu2Cl5 nanocrystals (NCs) with a considerable piezochromic range of 232 nm because of their unique inorganic rigid structure. The PL energy shifted from the lowest‐energy red fluorescence (1.85 eV) to the highest‐energy blue fluorescence (2.83 eV), covering almost the entire visible wavelength range. Pressure‐modulated self‐trapped exciton emission between different energy levels of self‐trapped states within Cs3Cu2Cl5 NCs was the main reason for this piezochromism property. Note that the quenched emission, which is over five times more intense than that in the initial state, is retained under ambient conditions upon decompression. This work provides a promising pressure indicating material, particularly used in pressure stability monitoring for equipment working at extreme environments.

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10−11 films is in 3.8 times and NC/Ag 10−12 is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10−11 and ∼4 times for NC/Ag,10−12 films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

Nanoparticle stressor-induced single-photon sources in monolayer WS2 emitting into a narrowband visible spectral range

A van der Waals heterostructure containing an atomically thin monolayer (ML) transition-metal dichalcogenide as a single-photon emitting layer is emerging as an intriguing solid-state quantum-photonic platform. Here, we report the utilization of spin-coating of silica nanoparticles for semi-deterministically creating the spectrally isolated, energetically stable, and narrow-linewidth single-photon emitters in ML-WS2. We also demonstrate that long-duration low-temperature annealing of the photonic heterostructure in the vacuum removes the energetically unstable emitters that are present due to fabrication-associated residue and lead to the emission of single-photons in a < 25 nm narrowband visible spectral range centered at ~620 nm. This work may pave the way toward realizing a hybrid-quantum-photonic platform containing a van der Waals heterostructure/device and an atomic-vapor system emitting/absorbing in the same visible spectral range.

Regulation of monolayer MgGeN2 thin film with uniaxial and biaxial strain

The regulation of electronic and optical properties with uniaxial and biaxial strain is computationally investigated for the monolayer thin film of a newly discovered quasi-layered MgGeN2 phase. It is found that, under uniaxial compression in both [100] and [010] directions with the perpendicular lattice parameter relaxable, the band gap will first increases and then decreases, while under uniaxial tensile strain the band gap decreases monotonically and the light absorption in the visible region is strongly enhanced. When uniaxial compression was applied with the perpendicular lattice constant fixed, the band gap behaves like the first kind of uniaxial compression and the light absorption is enhanced in visible range by compression. When biaxial strain was applied, the band gap shows a monotonic decrease from the largest compression down to the largest tensile strain, while the light absorption behaves in the opposite way. Therefore, the band structure and light absorption of monolayer MgGeN2 can be efficiently tuned with strain and stress, which can potentially be used for the MgGeN2 film in device design, thus promoting its applications in optoelectronics and photocatalysis.

Theoretical study on photoelectric properties of ferroelectric photovoltaic perovskite CsGeBr3 based on first-principle calculations

Ferroelectric photovoltaic materials have attracted great attention because of their unique photoelectric conversion mechanism, high photo-generated voltage, and adjustable polarization intensity. Traditional ferroelectric oxide perovskites such as BaTiO3, BiFeO3, and Pb(ZrTi)O3 have attracted much attention but they are not suitable as light absorbing layers in solar cells, due to the large optical bandgap, low light absorption rate, and small photogenerated current. Therefore, it is necessary to seek prominent materials with both ferroelectric and suitable band gaps. Recently, the evidence of ferroelectricity in the typical three-dimensional all-inorganic halide perovskites CsGeX3, with band gaps of 1.6 eV to 2.3 eV has been confirmed. However, the spontaneous polarization of ferroelectric perovskite CsGeX3 is ∼10 to 20 μc cm−2 which is weaker than that of ABO3 (∼26 to 75 μc cm−2). Strain engineering has a significant influence on the properties of semiconductor materials by controlling the lattice scaling and the internal atomic spacing. Hence, in this work, strain engineering is introduced to adjust the ferroelectric polarization and the photoelectric properties of ferroelectric perovskite CsGeBr3. The calculated results show that when the applied compressive strain increases from 0% to −4%, the spontaneous polarization of ferroelectric perovskite CsGeBr3 increases from 14.23 μc cm−2 to 51.61 μc cm−2, and the band gap reduces from 2.3631 eV to 1.5310 eV. The effective mass of electrons and holes gradually reduces, exciton binding energies decrease from 48 meV to 5 meV, and the optical absorption coefficient is strongly enhanced from 3 × 105 cm−1 to 5 × 105 cm−1 in the visible range. Besides, the power conversion efficiency(PCE) of CsGeBr3 is significantly increased from 16.95% to 26.77%. Therefore, the results indicate that the application of compressive strain can increase the ferroelectric polarization and enhance the original photovoltaic performance of ferroelectric perovskite CsGeBr3. Our theoretical calculations can provide useful insights and beneficial guidance into experimental studies of ferroelectric perovskites in photoelectric applications.

Fluorescence based dopamine detection

Dopamine is an important hormone and neurotransmitter, and its levels in human fluids can indicate stress, depression, and various mental disorders. Food products, as well as medications, affect its level in the human body greatly. Therefore, dopamine monitoring is crucial, and necessary for improving the quality of life. The priority is to search for simple and environmentally friendly sensor systems for the in vitro detection of dopamine, enabling mass utilization.In this study, we explored the use of o-phthalaldehyde (OPA) as an indicator for the detection of dopamine, with fluorescence in the visible range (λex/λem = 390/455 nm), while direct dopamine fluorescence measurement was in the UV range (λex/λem = 280/320 nm). The longer excitation/emission wavelengths of dopamine-OPA complex, as well as lower detection limits, are useful for developing a simple detection method using LEDs. Three types of poloxamers were tested as additives to improve the fluorescence signal from the reaction between dopamine and OPA. Pluronic F127 led to a 16-fold increase in the fluorescence. Utilizing 4% Pluronic F127 with OPA at pH 7 resulted in a linear response within concentration ranges of dopamine (0.5–3 µM), achieving a limit of detection of 0.015 µM. In contrast, a direct detection of dopamine within the same range exhibited a detection limit of 0.13 µM.

Substitution effects on the photoinduced excited state dynamics of perylenemonoimides in solution and thin films.

Perylene monoimide (PMI) derivatives are attracting significant attention due to their strong absorption in the visible range, thermal stability, and synthetic accessibility. These properties make them promising for application in various areas such as optoelectronic devices, photosensitizers, etc. In this work, the photophysical properties and excited state dynamics of four different PMI derivatives (PMIB, BrPMITB, PMITB, and APITB) were studied in solution and thin films utilizing steady-state and time-resolved spectroscopic techniques. Among the four PMI derivatives, APITB is designed as a donor-acceptor dyad, with thianthrene as a donor and PMI as an acceptor. The activation of the triplet state through the spin-orbit charge transfer intersystem crossing (SOCT-ISC) process in THF was observed upon substitution with the thianthrene group at the peri position of the PMI moiety. The SOCT-ISC process facilitates triplet formation in the APITB dyad within 423 ps. Meanwhile, other PMI derivatives showed fluorescence within the femtosecond timescale in THF. The PMI derivatives in thin films displayed different photo physical properties to those in THF. This discrepancy arises due to the effective intermolecular coupling between the PMI derivatives in thin films.

Optoelectronic and photocatalytic behaviour of a type-II GaAlS2/HfS2 heterostructure: ab initio study

Theoretical examination based on first principle computation has been conducted for van der Waals heterostructure (vdwHS) GaAlS2/HfS2 including structural, optoelectronic and photocatalytic characteristics. From the adhesion energy calculation, the AB configuration of GaAlS2/HfS2 vdwHS is the most stable. A type-II GaAlS2/HfS2 vdwHS is a dynamically and thermally stable structure. The band edge position, projected band, and projected charge densities verify the type-II alignment of GaAlS2/HfS2 vdwHS. For GaAlS2/HfS2, GaAlS2 is acting as a donor and HfS2 is acting as an acceptor ensured by the charge density difference plot. The electron localized function validates the weak van der Waals interaction between GaAlS2 and HfS2. The GaAlS2/HfS2 vdwHS possess an indirect bandgap of 1.54 eV with notable absorption in the visible range. The findings assure that the GaAlS2/HfS2 vdwHS is an efficient photocatalyst for pH 4–8. The band alignment of GaAlS2/HfS2 is suitable for Z-scheme charge transfer. The strain influenced band edge suggests that the GaAlS2/HfS2 vdwHS remains photocatalytic for strain −4% to +6% in both cases of uniaxial and biaxial strains.

A versatile ratiometric fluorescence nanoprobe for the determination of clonazepam in patients' plasma samples.

Despite the necessity of the study of therapeutic drug monitoring of clonazepam (CLZ), there are only a few fast detection methods available for determining CLZ in biological media. This study aims to develop a cost-effective and ratiometric probe for the quantification of CLZ in plasma samples. Fluorescent polydopamine nanoparticles were produced through a self-polymerization process at a pH of 8.5. Rhodamine B molecules were employed as a fluorescent reference material, emitting stable fluorescence in the visible range. The fabricated probe exhibited a specific detection capability for CLZ. The fluorescence emission of the probe was enhanced in two concentration ranges: from 50 ng/mL to 1.0 μg/mL and from 1.0 to 15.0 μg/mL with a lower limit of quantification of 50 ng/mL, indicating the sensitivity of the probe for detecting CLZ plasma levels. The accuracy of the probe is favorable which could be recommended for CLZ monitoring in the biological media. Furthermore, this probe is highly specific towards CLZ in the presence of various interfering agents which is mainly caused by its ratiometric nature. The developed platform showed high reliability in quantifying CLZ concentrations in patients' plasma samples. Hence, the fabricated probe could be recommended as a reliable method for the routine detection of CLZ in clinical settings.

Lewis acid catalysis of polydopamine electropolymerisation as a tool for shaping its morphology and electrochemical properties

AbstractOrganic–inorganic semiconductor interfaces are of utmost importance in many photoelectrochemical applications, including water splitting and photodegradation of pollutants. The current work focuses on the fabrication and characterisation of transition metal-loaded polydopamine (PDA) electropolymerised on the surface of titania nanotubes. The structural studies via X-ray photoelectron spectroscopy and electron microscopy confirmed the catalytic effect of d-metal salts on the formation of the PDA layer during electropolymerisation. Cu and Ni loading leads to a significant enhancement of the visible absorption compared to that of the pristine PDA, also confirmed by the density functional theory calculations. Although the boost is greater for the thickest coatings, an excess amount of polymer suppresses the charge transfer and thus photocurrent generation. Synthesis in acidic conditions—optimal for photosensitisation—provides structures with a strong increase in the photocurrent quantum efficiency in the visible range, equal to 20% at 400 nm. Graphical Abstract