Virtual Frisch-grid CdZnTe Detectors Research Articles

An array of virtual Frisch-grid CdZnTe detectors and a front-end application-specific integrated circuit for large-area position-sensitive gamma-ray cameras.

We developed a robust and low-cost array of virtual Frisch-grid CdZnTe detectors coupled to a front-end readout application-specific integrated circuit (ASIC) for spectroscopy and imaging of gamma rays. The array operates as a self-reliant detector module. It is comprised of 36 close-packed 6 × 6 × 15 mm(3) detectors grouped into 3 × 3 sub-arrays of 2 × 2 detectors with the common cathodes. The front-end analog ASIC accommodates up to 36 anode and 9 cathode inputs. Several detector modules can be integrated into a single- or multi-layer unit operating as a Compton or a coded-aperture camera. We present the results from testing two fully assembled modules and readout electronics. The further enhancement of the arrays' performance and reduction of their cost are possible by using position-sensitive virtual Frisch-grid detectors, which allow for accurate corrections of the response of material non-uniformities caused by crystal defects.

Array of Virtual Frisch-Grid CZT Detectors With Common Cathode Readout for Correcting Charge Signals and Rejection of Incomplete Charge-Collection Events

New results from testing an array of 6 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\,\times\,$</tex></formula> 6 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\,\times\,$</tex></formula> 15 mm <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$^{3}$</tex></formula> virtual Frisch-grid CdZnTe (CZT) detectors with common-cathode readout for charge signals correction and rejection of incomplete charge collection events (ICC) are presented. The array employs parallelepiped-shaped crystals of a large geometrical aspect ratio with two planar contacts on the top and bottom surfaces (anode and cathode) and an additional shielding electrode placed on the sides to create the virtual Frisch-grid effect. The detectors are arranged in 2 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\,\times\,$</tex></formula> 2 or 3 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\,\times\,$</tex></formula> 3 detector modules with the common cathode readout by a single electronic channel. Because of the common cathode, the length of the shielding electrode can be further reduced with no adverse effects on the device performance. By implementing a novel technique for rejecting ICC events caused by the extended defects, we can achieve good spectral responses from ordinary CZT crystals, which can be produced with higher yield and at lower cost. For such crystals, the resolution of individual detectors is expected to be in the range of 0.8–1.5% FWHM at 662 keV with an average value of 1.3%. Arrays of virtual Frisch-grid detectors offer a robust and low-cost approach for making large-area detection modules that can potentially substitute for more advanced, but also more expensive and less available, pixel detectors in applications with slightly relaxed requirements on position- and energy-resolution (e.g., for coded aperture telescopes). In addition, such virtual Frisch-grid arrays will require a comparably smaller number of readout channels, which allows for lower power consumption.