Vibrational Spectra Research Articles

Cavity induced modulation of intramolecular vibrational energy flow pathways.

Recent experiments in polariton chemistry indicate that reaction rates can be significantly enhanced or suppressed inside an optical cavity. One possible explanation for the rate modulation involves the cavity mode altering the intramolecular vibrational energy redistribution (IVR) pathways by coupling to specific molecular vibrations in the vibrational strong coupling (VSC) regime. However, the mechanism for such a cavity-mediated modulation of IVR is yet to be understood. In a recent study, Ahn et al. [Science 380, 1165 (2023)] observed that the rate of alcoholysis of phenyl isocyanate (PHI) is considerably suppressed when the cavity mode is tuned to be resonant with the isocyanate (NCO) stretching mode of PHI. Here, we analyze the quantum and classical IVR dynamics of a model effective Hamiltonian for PHI involving the high-frequency NCO-stretch mode and two of the key low-frequency phenyl ring modes. We compute various indicators of the extent of IVR in the cavity-molecule system and show that tuning the cavity frequency to the NCO-stretching mode strongly perturbs the cavity-free IVR pathways. Subsequent IVR dynamics involving the cavity and the molecular anharmonic resonances lead to efficient scrambling of an initial NCO-stretching overtone state over the molecular quantum number space. We also show that the hybrid light-matter states of the effective Hamiltonian undergo a localization-delocalization transition in the VSC regime.

Carbon Nanotubes in Cement—A New Approach for Building Composites and Its Influence on Environmental Effect of Material

An addition of carbon nanostructures to cement paste is problematic due to the difficulties in obtaining homogenous mixtures. The paper reports on a more effective way of mixing carboxylated multi-walled carbon nanotubes (MWCNT-COOH) in cement pastes. The additional biological impact of the studied nanomodified cement was analyzed in the case of two moss species’ vitality. The applied approach of obtaining a homogeneous mixture is based on intense mechanochemical mixing of MWCNT-COOH together with polycarboxylate superplasticizer (SP). As a result, a more homogenous suspension of MWCNT-COOH within a liquid superplasticizer, suitable for addition to hydrophilic cement paste, was obtained. FT-IR/Raman spectroscopy was used for materials’ characterization. To explain the mixing process at the molecular level, systematic theoretical studies using density functional theory (DFT) were performed. The structures, interaction energies and IR/Raman vibrational spectra of model carboxylic acids, mixed with functionalized SWCNTs as simplified models of real MWCNTs, were obtained. Due to the controversial opinions on the environmental hazards of carbon nanostructures, additional in vivo studies were performed. In this case, effects of cement modified by the addition of small amounts of MWCNT-COOH with SP in comparison to the composite without carbon nanostructures and control subsoil on the vitality of mosses Polytrichum formosum and Pseudoscleropodium purum were studied.

Spectroscopic properties under vibrational strong coupling in disordered matter from path-integral Monte Carlo simulations.

Vibrational strong coupling (VSC), the strong coupling between a Fabry-Perrot cavity and molecular vibrations at mid-infrared frequencies, has received important attention in the last years due to its capacity of modifying both vibrational spectra and chemical reactivity. VSC is a collective effect, and in this work, we introduce Path Integral Monte Carlo (PIMC) simulations that not only take into account the quantum character of the molecular vibrations and of the optical resonance of the cavity but also reproduce this collective behavior by considering multiple replicas of the molecular system. Moreover, we show that it is possible to extract from the PIMC simulations the decomposition of the hybrid optical and molecular states in terms of the bare molecular modes. On a model system of an ensemble of disordered Morse oscillators coupled to a single cavity through the Pauli-Fierz Hamiltonian, PIMC can retrieve known features obtained from analytical modes such as the Tavis-Cummings model and obtain a very close agreement with exact diagonalization for a small number of Morse oscillators. We also find that notwithstanding the anhamonic character of the Morse oscillators, the collective mode coupled to the cavity behaves as a harmonic oscillator, following the quantum central limit theorem.

Vibrational Mode-Dependent Circular Dichroism of Jet-Cooled Styrene Oxide.

Vibrational mode-dependent circular dichroism (CD) effects in vibrational CD spectra are often used to determine the handedness of molecules with multiple chiral centers. Here, we investigate vibrational mode-dependent CD effects in the electronic CD spectra of jet-cooled (R)-(+)- and (S)-(-)-styrene oxide obtained by using resonant two-photon ionization CD (R2PICD) spectroscopy. Although most fundamental vibronic bands demonstrated CD signatures consistent with that of the origin band, the overtone and combination bands exhibited opposite CD signatures. Theoretical calculations suggest that CD in fundamental bands are primarily governed by Franck-Condon contributions, whereas Herzberg-Teller contributions, which reflect the influences of vibrational modes on CD values, become more significant in overtone and combination bands. These results underscore the potential of mode-dependent vibronic CD signals in R2PICD spectra for determining the absolute configurations of molecules with multiple chiral centers.

Molecular modeling analyses of functionalized cellulose.

Functionalization of cellulose with nanomaterials and functional groups is essential for enhancing its properties for specific applications, such as flexible sensors and printed electronics. This study employs Hartree Fock (HF) and Density Functional Theory (DFT) calculations to investigate the vibrational spectra of cellulose, identifying DFT: B3LYP/3-21g** as the optimal model aligning with experimental spectra. Using this model, we examined the impact of functionalizing cellulose with various groups (OH, NH2, COOH, CH3, CHO, CN, SH) and graphene oxide (GO) on its electronic properties. The results indicate that cellulose functionalized with GO (Cellulose-GO) has the lowest bandgap energy (0.1687eV), and improvements in reactivity, stability, and electronic properties were confirmed through Molecular Electrostatic Potential (MESP) and Total Dipole Moment (TDM) analyses. The spectrum of Density of States (DOS) for the cellulose functionalized with different groups shows several peaks, indicating various energy levels where electronic states are concentrated. The Projected Density of States (PDOS) analysis reveals how different functional groups affect the electronic structure of cellulose. Moreover, the (Cellulose-GO) composite was characterized using an Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectrometer, revealing interaction through the OH group of CH2OH, as indicated by a new band at 1710cm-1, consistent with theoretical predictions. Overall, this study demonstrates that functionalization with GO enhances cellulose's responsiveness, degradation, and electrical properties, making it suitable for applications in flexible electronic devices and protective barriers against corrosion.

The Analysis of Vibrational Spectra: Past, Present and Future.

Vibrational spectroscopy can be said to have started with the seminal work of Coblentz in the 1900s, who recorded the first recognisable infrared spectra. Today, vibrational spectroscopy is ubiquitous and there are many ways to measure a vibrational spectrum. But this is usually only the first step, almost always there is a need to assign the resulting spectra: "what property of the system results in a feature at this energy"? How this question has been answered has changed over the last century, as our understanding of the fundamental physics of matter has evolved. In this Perspective, I will present my view of how the analysis of vibrational spectra has evolved over time. The article is divided into three sections: past, present and future. The "past" section consists of a very brief history of vibrational spectroscopy. The "present" is centered around ab initio studies, particularly with density functional theory (DFT) and I will describe how this has become almost routine. For the "future", I will extrapolate current trends and also speculate as to what might come next.

Ultrastrong coupling between molecular vibrations in water and surface lattice resonances.

We investigate the vibrational ultrastrong coupling between molecular vibrations of water molecules and surface lattice resonances (SLRs) sustained by extended arrays of plasmonic microparticles. We design and fabricate an array of gold bowties, which sustain a very high field enhancement, with its SLR resonated with the OH stretching modes of water. We measure a Rabi splitting of 567 cm-1 in the strongly coupled system, whose coupling strength is 8% of the OH vibrational energy, at the onset of the ultrastrong coupling regime (10%). These results introduce metallic microparticle arrays as a platform for the investigation of ultrastrong coupling, which could be used in polaritonic chemistry to modify the dynamics of chemical reactions that require high coupling strengths.

The Many-Body Expansion for Aqueous Systems Revisited: IV. Stabilization of Halide-Anion Pairs in Small Water Clusters.

We report the structures, energetics, many-body effects, and vibrational spectra of water clusters stabilizing pairs of halide-anions, X-(H2O)kY- (k = 2-6, X/Y = F, Cl, Br, I) as well as their stability in the gas phase relative to fragmentation. We find that these metastable cluster structures mimicking the solvent-separated ion pair (SSIP) configurations in aqueous solutions are less stable relative to fragmentation into smaller ionic aqueous clusters containing a single halide anion. The many-body expansion (MBE) at these geometries was found to converge at the 4-body term, which is, however, significant, amounting to >20% of the total binding energy in several instances. The binding motif of these ion pair aqueous clusters starts as networks in which the water molecules form a "bridge" between the two halide-anions. As the cluster grows, these structures become destabilized by a more repulsive 3-body term for distances R(O-O) < 3.45 Å with respect to networks in which water molecules move outside the bridge, solvating the other side of the anion.

Tetracyanoethylene Na+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {Na}^+$$\\end{document}/K+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {K}^+$$\\end{document} radical anion coordination sites unveiled via electronic and vibrational fingerprints

Tetracyanoethylene (TCNE) is a very effective electron acceptor and can form stable complexes with various chemical species and is known for its interesting electronic and optical properties. The formation of the monoanion gives TCNE unique electronic and chemical properties, making it a material of interest for several technological applications including solar cells, organic battery electrodes, sodium/potassium-ion batteries and information storage devices. The chemico-physical characterization of Na+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {Na}^+$$\\end{document} and K+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {K}^+$$\\end{document} coordination of TCNE in solution is not available so far, although it would be valuable for understanding the molecular mechanisms of charging and discharging processes in innovative battery devices. The present theoretical-computational study characterizes the vibrational and electronic properties of ion-coordinated TCNE in solution. We analyzed the ground electronic state through equilibrium structures, focusing on structural features, stability, optical properties and Raman vibrational modes. The Na+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {Na}^+$$\\end{document} and K+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {K}^+$$\\end{document} cations, coordinated at two distinct sites, significantly alter the geometry, and modulate electronic and vibrational properties. Using ab initio molecular dynamics simulations, we computed vibrational spectra, finding that TCNE complexes serve as effective probes for detecting environmental variations, with key vibrational modes on CC and CN moieties being sensitive to cation interactions. Additionally, a correlation between C=C bond distances and vibrational frequencies was observed. In conclusion, this study provides further insight into the role of TCNE in optoelectronic applications and nonaqueous battery systems.

Simultaneous analysis of rotational and vibrational spectra in even–even deformed nuclei: a study on $$^{168}$$Er

Simultaneous analysis of rotational and vibrational spectra in even–even deformed nuclei: a study on $$^{168}$$Er

Impact of chlorine substitution on valence orbitals and ionization dynamics in 3-chloropyridine: Insights from high-resolution vacuum ultraviolet mass-analyzed threshold ionization study.

In this study, the effects of chlorine substitution on the valence orbitals and electronic states of 3-chloropyridine (3-CP) were investigated utilizing high-resolution vacuum ultraviolet mass-analyzed threshold ionization (VUV-MATI) spectroscopy and computational methods. High-quality vibrational spectra were obtained from the VUV-MATI spectra of 3-CP isotopomers (35Cl and 37Cl), revealing high-quality vibrational spectra for the lowest cationic states. The adiabatic ionization energies (AIEs) of these isotopomers were accurately determined, providing detailed information about the electronic structure and ionization dynamics. Intense spectra peaks were linked with the D1 excited state of the 3-CP cation, with vibronic transitions in this state closely matching those predicted by Franck-Condon simulations. This provided insights into the cationic structure and the roles of the highest occupied molecular orbital (HOMO) and the HOMO-1. The HOMO was primarily a π orbital of the pyridine ring, while the HOMO-1 consisted of nonbonding orbitals. The AIEs suggested that meta-chlorine substitution stabilizes nonbonding orbitals less effectively than ortho substitution, indicating closely spaced electronic states in the 3-CP cation. Minor discrepancies in vibrational frequencies and intensities, particularly above 800cm-1, suggested the presence of vibronic coupling, warranting further investigation. Overall, this study provided a comprehensive understanding of the vibronic and ionization properties of 3-CP, emphasizing the influence of the position of the chlorine substitution on molecular orbitals and the value of advanced theoretical and experimental approaches for analyzing the vibrational spectra of complex molecules.

Nonlinear mechanical response of finite-length soft composites with random dislocations

The effects of random dislocations on the vibrational properties of finite-length RNA and DNA macro-structures have been investigated by means of a harmonic Hamiltonian and the Green’s function method. The RNA molecule has been modeled using a half ladder model, and three models (a fishbone model and two different strand models) have been employed to model the structure of DNA. The lengths of the finite and cyclic systems are gradually increased to more accurately approximate the structures of RNA and DNA. Springs whose behaviors are governed by Hooke’s constitutive law have been used to represent the bonds between the masses, with the stiffness of the vertical springs randomly changing along the length of each model. This results in a more realistic representation of the inherent randomness of the studied structures. To investigate the effect of random dislocations on the mechanical response of the studied systems, it has been assumed that a random mass-spring ensemble has been knocked out of place by an external force. It has been found that increasing the number of building blocks along the length of the models suppresses the influence of dislocations on the vibration spectra of RNA and DNA. It was also observed that at low frequencies, the influence of dislocations becomes more pronounced. Besides, taking into account the collective mass of the sugar-phosphate backbone results in the appearance of gaps in the vibration spectra. By introducing dislocations into the models, additional dislocation-induced vibrational states appear in the DOS curves. What stands out from the results is that the responses of the studied systems to these changes are strictly nonlinear. The employed methodology can be applied to investigate the mechanical response of damaged RNA and DNA.

Superstatistical functions of modified shifted Morse potential for diatomic molecules

The application of the molecular potential model to the study of different thermodynamic systems has been a focus of interest in recent time due to its importance in molecular and chemical physics. Hence, the asymptotic iteration method and the Laguerre polynomials are employed to obtain the eigensolutions of the Schrödinger equation with the modified shifted Morse potential model. Vibrational energy results for different diatomic molecules have been presented numerically, and these results are compared with experimental data and other results from available literature. The variation of normalised wave function and probability density of modified shifted Morse potential for some selected diatomic molecules at the ground- and first-excited states have been considered. Results obtained show that the equally spaced sinusoidal wave curves and varying nodes depend on the level of electron concentrations in the diatomic molecules considered. Partition function and other superstatistical function expressions of modified shifted Morse potential for some diatomic molecules within the modified Dirac delta distribution are obtained, using the Poisson summation formula. The superstatistical plots show a high level of dependence on the temperature parameter, maximum vibrational quantum number and deformation parameter. The superstatistical functions for a deformation parameter of zero correspond to the conventional thermodynamic functions.

Electron transport and quantum phase transitions in cumulene-connected C80H20 fulleryne: DFT and tight-binding studies

Molecular bridges are opening up exciting new applications in diverse fields, improving the efficiency of conductive inks, enhancing the performance of devices such as organic light-emitting diodes and low-cost solar cells, and advancing the development of highly sensitive sensors, chemical reactions, drug delivery systems, and more. In this paper, we study the electron transport properties of a C80H20 fulleryne (dodecahedryne) connected to two cumulene electrodes. Using density functional theory (DFT), we determine the optimal molecular bridge structure. Based on the IR vibration spectra, different stable phases of the molecular bridge are obtained. The corresponding tight-binding (TB) parameters of the cage are obtained by assigning appropriate values of the length and type of bonds for the fulleryne cage through matching the HOMO-LUMO gap between the DFT calculations and the TB parameters. The electron transport for the desired structures is investigated using the obtained tight-binding parameters and the non-equilibrium Green's function (NEGF) method. Finally, it is concluded that among the five possible configurations for the cumulene-dodecahedryne -cumulene molecular bridge, only one specific configuration—where the electrodes are one edge apart—exhibits metallic behavior, while other positions act as insulators. In addition, the system exhibits quantum phase transitions from metal to semiconductor and from insulator to metal in the presence of critical electric fields. The ability to control quantum phase transitions in these molecular systems can be leveraged to develop qubits for quantum computing. The unique properties can be utilized to design advanced molecular electronic devices.

An Investigation of the Structures of [(Glycine)(1-Methyluracil)]M+ Complexes (M = H, Li, Na, K) in the Gas Phase by IRMPD Spectroscopy and Theoretical Methods.

The presence of ions in the complexation of molecules can profoundly affect the structure, resulting in changes to functionality and stability. These non-covalent interactions drive many biological processes both necessary and inimical and require extensive research to understand and predict their effects. Protonated and alkali metalated complexes of glycine (Gly) and 1-methyluracil (1-mUra) were studied using infrared multiphoton dissociation (IRMPD) spectroscopy and density functional theory (DFT) calculations. The experimental and simulated vibrational spectra were compared to help elucidate the structure of each complex. The lowest energy structure for [(Gly)(1-mUra)]H+ consists of amine protonated Gly bound to O4 of canonical 1-mUra through a single ionic hydrogen bond with another, intraglycine ionic hydrogen bond between the protonated amine group and the carbonyl oxygen. For [(Gly)(1-mUra)]Li+, [(Gly)(1-mUra)]Na+ and [(Gly)(1-mUra)]K+, the experimental spectra are most consistent with the metal cations binding in a trigonal planar geometry with 1-mUra bound to the metal cation via the O4 carbonyl. In [(Gly)(1-mUra)]Li+ and [(Gly)(1-mUra)]Na+, the metal cation is bound to canonical Gly via the carbonyl oxygen and amine nitrogen, but in [(Gly)(1-mUra)]K+, Gly is bound through both oxygens and contains an intraglycine hydrogen bond from the hydroxyl to the amine nitrogen.

Reactions of Aluminum Oxide Cluster Cations with Ethane: A Mass-Spectrometric and Vibrational Spectroscopy Study.

The pathways for the reactions of aluminum oxide cluster ions with ethane have been measured. For selected ions (Al2O+, Al3O2 +, Al3O4 +, Al4O7 +) the structure of the collisionally-stabilized reaction intermediates were explored by measuring the photodissociation vibrational spectra from 2600 cm-1-3100 cm-1. Density functional theory was used to calculate features of the potential energy surfaces for the reactions and the vibrational spectra of intermediates. Generally, more than one isomer contributes to the observed spectrum. The oxygen-deficient clusters Al2O+ and Al3O2 + have large C-H activation barriers, so only the entrance channel complexes in which intact C2H6 binds to aluminum are observed. This interaction leads to a substantial (~200 cm-1) red shift of the C-H symmetric stretch in ethane, indicating significant weakening of the proximal C-H bonds. In Al3O4 +, the complex formed by interactions with three C2H6 is investigated and, in addition to entrance channel complexes, the C-H activation intermediate Al3O4H+(C2H5)(C2H6)2 is observed. For oxygen-rich Al4O7 +, the C2H6 is favored to bind at an aluminum site far from the reactive superoxide group, reducing the reactivity. As expected, oxygen-rich species and open-shell cluster ions have smaller barriers for C-H bond activation, except for Al3O4 + which is predicted and observed to be reactive.

Ultra-low frequency and broadband flexural wave attenuation using an inertant nonlinear metamaterial beam

Attenuation of elastic waves in the extremely low frequency range is a considerable challenge. While linear acoustic metamaterials can manipulate elastic waves, their effectiveness is often limited to a narrow frequency range. The present paper proposes a novel inertant nonlinear metamaterial beam to address the challenging problem of the ultra-low frequency broadband flexural wave attenuation. The amplitude-frequency response and dispersion relations of the flexural waves are obtained using the first-order harmonic balance method, where four different resonant units are investigated and the resulting band gaps are compared. Finite element (FE) simulations are also conducted to evaluate the transmission spectra of the flexural vibration through a finite metamaterial beam. The good consistency between the band gaps predicted by the analytical model and the FE simulation verifies the correctness and effectiveness of the developed analytical approach. The results of this study demonstrate that introducing the inertance and softening nonlinearity into the resonant units can significantly widen the flexural wave band gaps within the low-frequency range. This finding provides a viable solution for engineering applications that require low-frequency vibration suppression and isolation.

Theoretical study of surface-enhanced Raman spectroscopy of dimethyl methylphosphonate

In this study, the surface-enhanced Raman spectroscopy spectra of dimethyl methyl phosphonate, which serves as a surrogate for the chemical warfare agent sarin, were modeled using density functional theory calculations. In addition, the fundamental mechanisms underlying the enhancement of surface-enhanced Raman spectroscopy are investigated. A comprehensive examination was conducted of the adsorption behavior and Surface-Enhanced Raman Spectroscopy enhancement effects resulting from the interaction between dimethyl methylphosphonate and silver clusters. Moreover, a comparison was made between the findings of the present study and the results of previous experiments in order to ascertain the optimal positions for the adsorption of silver clusters on dimethyl methylphosphonate molecules. In this article, the kinetics of the interaction between dimethyl methylphosphonate and silver clusters were theoretically explored through six different adsorption configurations. It was found that the configuration involving the dimethyl methylphosphonate structure and silver clusters containing three silver atoms exhibited the highest stability. By integrating Raman spectroscopic data with our theoretical insights, the vibrational modes, Raman spectra, and surface-enhanced Raman spectra of dimethyl methylphosphonate molecules were systematically correlated using Gaussian 09 and GaussView 5.0.8 software for detailed image-based analysis.

Back-decay of the muonic molecular ion (αμt)012+ resonantly formed in (tμ)1s+4HeH+ collision

Abstract Resonant formation of the muonic molecular ion ( α μ t ) 01 2 + in the collision of the muonic tritium atom with the helium hydride ion, ( t μ ) 1 s + 4 HeH + → [ ( α μ t ) 01 2 + , p , e e ] + , is proposed. The ( α μ t ) 01 2 + ion is formed in the rotational-vibrational state (0,1) as one of the two nuclei of the final complex. Back-decay process [ ( α μ t ) 01 2 + , p , e e ] K n + → ( t μ ) 1 s + 4 HeH K ′ n ′ + , where K and n ( K ′ and n ′ ) is the rotational and vibrational quantum number, respectively, is considered in detail and the corresponding decay widths for all possible rotational-vibrational ( K , n ) → ( K ′ , n ′ ) transitions are calculated. Numerous inelastic decay channels of ( α μ t ) 01 2 + are also presented and discussed. The possible fast resonant formation of the ( α μ t ) 01 2 + ion may provide an interesting tool for experimental studies of t ( α , γ ) 7 Li nuclear fusion, which is one of the most important reactions in Big-Bang nucleosynthesis models. Studying this reaction may prove important for solving the lithium problem.

Impact of early-age vibration on the permeability and microstructure of mature-age concrete

Dynamic excitation in early-age significantly impacts the performances of mature concrete in underground structures, such as tunnels beneath railways supported by cast-in-place concrete. This study explores the impact of early dynamic excitation on properties of mature concrete. Vibration tests at a fundamental frequency of 114 Hz, with peak acceleration levels ranging from 0.1 g to 0.4 g, were conducted using shaking table. Specimens underwent 33 seconds of dynamic excitation every 15 minutes over the initial 48 hours, excluding a night break from 0 to 6am, totaling 114 vibration cycles. Various lab tests were employed to assess the properties and microstructure of mature concrete post-vibration, including water penetration resistance, capillary water absorption, Coulomb electric flux, scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP) and Nitrogen adsorption-desorption measurement (NAM). The results proves that vibration causes water secretion and air bubbles discharge before the initial setting of concrete, thereby enhancing the hydration reaction. The relationship between vibration loads with varying peak accelerations and the cohesion resulting from hydration reaction influences the microstructural evolution of concrete, leading to the weakening and strengthening of permeability of mature concrete. Under the vibration spectrum and test conditions described in this paper, vibration loads with peak values less than 0.234 g decrease the total volume of large and middle pores (>20 nm) by up to 50 % and increase the total volume of small pores (<20 nm) by up to 200 %. Due to these changes in pore structure, the permeability coefficient (Sk), cumulative capillary water height (i) and Coulomb electric flux decrease by up to 47.84 %, 39.5 % and 31.6 %, respectively. However, when the amplitudes of vibration loads exceed 0.234 g, the total volume of large and medium pores (>20 nm) increases, and that of small pores (<20 nm) decreases, leading to a reduction of the impermeability of mature concrete. Additionally, the SEM analysis corroborates these microstructural variations.