Vibrational Spectra Research Articles

External electric field induced emission behavior for ESIPT-based 2-(benzo[d]thiazol-2-yl)-4-(pyren-1-yl)phenol towards near-infrared region

Organic light-emitting diodes (OLEDs) for low energy transfer and double emission, but the current methods for regulating ESIPT processes are mostly solvent and substituent effects. Here, utilizing the density theory functional (DFT) and time-dependent density functional theory (TD-DFT) methods, the ESIPT process controlled by an external electric field (EEF) is proposed, and the changes in photophysical properties of 2-(benzo[d]thiazol-2-yl)-4-(pyren-1-yl)phenol (PyHBT) are investigated. Structural parameter variations and IR vibrational spectra measure the prerequisite for the ESIPT process, namely, intramolecular hydrogen bond (IHB) strength, and the scanned potential energy curves (PECs) demonstrate that the ESIPT process of PyHBT is harder to execute as the positive EEF increases, and the opposite is true for the negative EEF. The absorption and fluorescence spectra show shifts under the distinct EEFs, and even the emission wavelength reaches the short-wave near-infrared (SW-NIR) region (780–1100 nm), such as 815.2 nm for a positive EEF of + 30 × 10-4 a.u. in the keto form. Additionally, the fluorescence intensity of PyHBT is strongly influenced by the positive EEF, especially in the enol form, and the investigation of the mechanism by hole-electron analysis demonstrates that under the positive EEF, the twisted intramolecular charge transfer (TICT) process is induced, which triggers the weakening of the fluorescence intensity. In summary, our work not only complements the theoretical approach to modulate the ESIPT process, but also reveals that the photophysical properties of materials affected by the external electric field are even expected to reach the NIR region.

Estimation of vibrational spectra of Trp-cage protein from non-equilibrium metadynamics simulations

The development of methods that allow a structural interpretation of linear and non-linear vibrational spectra is of great importance, both for spectroscopy and for optimizing force-field quality. The experimentally measured signals are ensemble averages over all accessible configurations, which complicates spectral calculations. To account for this, we present a recipe for calculating vibrational amide-I spectra of proteins based on metadynamics molecular dynamics simulations. For each frame, a one-exciton Hamiltonian is set up for the backbone amide groups, in which the couplings are estimated with the transition-charge coupling model for non-nearest neighbors, and with a parametrized map of ab initio calculations that give the coupling as a function of the dihedral angles for nearest neighbors. The local-mode frequency variations due to environmental factors such as hydrogen bonds are modelled by exploiting the linear relationship between the amide C-O bond length and the amide-I frequency. The spectra are subsequently calculated while taking into account the equilibrium statistical weights of the frames that are determined using a previously-published reweighting procedure. By implementing all these steps in an efficient Fortran code, the spectra can be averaged over very large amounts of structures, thereby extensively covering the phase space of proteins. Using this recipe, the spectral responses of 2.5 million frames of a metadynamics simulation of the miniprotein Trp-cage are averaged to reproduce the experimental temperature-dependent IR spectra very well. The spectral calculations provide new insight into the origin of the various spectral signatures (which are typically challenging to disentangle in the congested amide-I region), and allow for a direct structural interpretation of the experimental spectra and for validation of the molecular dynamics simulations of ensembles.

Using the pH sensitivity of switchable surfactants to understand the role of the alkyl tail conformation and hydrogen bonding at a molecular level in elucidating emulsion stability

HypothesisThe monoalkyl diamine surfactant, N-dodecylpropane-1,3-diamine (DPDA), is expected to exhibit a pH-dependent charge switchability. In response to pH changes, the interfacial self-assembly of DPDA becomes an intermediary constituent that can potentially modify the interfacial interactions and structural assembly of both the oil and water phases. Hence, we hypothesize that as we change the pH, DPDA will respond to it by changing its charge and alkyl tail conformation as well as the conformation of adjacent phases at the molecular level, consequently affecting emulsion formation and stability. A neutral pH, resulting in a mono-cationic dialkyl amine, affects the conformation, driving an ordered self-assembly and stable emulsion. ExperimentsThe pH-sensitivity and interfacial activity of DPDA were evaluated through pH titration and interfacial tension measurements. Subsequently, a molecular-level study of DPDA, as a pH-sensitive switchable surfactant, was performed at the dodecane-water interface using SFG spectroscopy. The interpretation of the vibrational spectra was further reinforced by determining the gauche defects in the interfacial alkyl chain organization and the extent of hydrogen (H) bonding between the interfacial water molecules. FindingsBy adjusting the pH of water, the charge of the adsorbed DPDA molecules, their self-assembly, the organization of interfacial molecules, and ultimately the stability of the emulsion were tuned. At pH 7.0, the SFG spectra of DPDA showed that the interfacial alkyl chains were relatively well-ordered, while water molecules also had stronger H-bonding interactions. As a result, the oil–water emulsion showed improved stability. When water was at a high pH, the water molecules had fewer H-bonding interactions and relatively disordered alkyl chains at the interface, providing desirable conditions for demulsification. These observations were compatible with the observation in bulk emulsion preparation, confirming that alkyl chain packing and water H-bonding interactions at the interface contribute to overall emulsion stability.

Deciphering the molecular complexity: Employing density functional theory to probe 2-aminopyridinium 4-methyl benzene sulfonate elucidates synthesis methodologies, spectroscopic trends, reactivity patterns, molecular dynamics, and antibacterial properties

Harnessing computational modeling with density functional theory (DFT) and the B3LYP functional, delved into molecular geometry, harmonic spectra, and vibrational spectra for 2-aminopyridinium 4-methylbenzene sulfonate (2AP4MBS). Leveraging VEDA software to conduct a detailed investigation into oscillation spectra, particularly focusing on both quantitative and qualitative facets of infrared (IR) and Raman spectra. Our work also explored natural bonding orbitals, Fukui analysis, RDG analysis, and net Mulliken charge calculations, hinting at potential charge transfer within the molecule. Experimental validation of UV–Vis spectroscopic analyses was conducted. Electron density homology surface mapping via electrostatic potential interface (ESP) revealed insights into size, shape, charge density distribution, and reactivity sites. Topological features were elucidated through ELF and LOL maps.Docking simulations shed light on binding energy and interactions with peptide molecules, offering potential pharmaceutical applications following Lipinski criteria and ADMET framework assessments.

Theoretical investigation of the excited-state intramolecular double proton transfer process of 2,2'-(benzo[1,2-d:4,5-d']bis(thiazole)-2,6-diyl)diphenol.

In this work, the excited state intramolecular double proton transfer (ESIDPT) mechanism of 2,2'-(benzo[1,2-d:4,5-d']bis(thiazole)-2,6-diyl)diphenol (BTAP) is proposed using density functional theory (DFT) and time-dependent DFT (TDDFT). The changes in bond lengths, bond angles and IR vibrational spectra associated with two intramolecular hydrogen bonds of BTAP upon photoexcitation indicate that the hydrogen bonds are strengthened in the excited state, facilitating the ESIDPT process. Investigation of the constructed S1-state potential energy surface proposes that BTAP prefers a stepwise ESIDPT mechanism. Electronic spectra and frontier molecular orbitals (FMOs) are also presented to illustrate the luminescent properties of BTAP.

Vibrational spectroscopy of interstellar PAHs: 1-cyanonaphthalene and 2-cyanonaphthalene

In this work, we present a comprehensive experimental and theoretical study of the vibrational spectra of PAH molecules recently detected in the interstellar medium: 1-cyanonaphthalene and 2-cyanonaphthalene. The room temperature IR spectra of 1- and 2-cyanonaphthalene in the region 100–3100 cm−1 and their vibrational Raman spectra in the region 35–3100 cm−1 are reported here for the first time. A detailed spectral analysis is carried out using quantum chemical calculations employing the DFT methodology. Anharmonic corrections using the VPT2 method yield excellent agreement with the experimental spectra. A re-investigation of the vibrational spectrum of the parent molecule: naphthalene validates the experimental and theoretical methods used. A consistent set of assignments is reported for the fundamental bands of 1- and 2-cyanonapththalene. The experimental and theoretical data presented here would be useful inputs for modelling the role of cyanonaphthalene in astrophysical processes.

The vibrational spectra of a model boron dipyrromethene molecule in condensed phase: Experimental and theoretical insights

Boron dipyrromethene (BODIPY) derivatives are an important class of organic molecular dyes. Their chemical structure can be easily modified by synthetic methods, introducing various substituent groups on a tricyclic core that represents the characteristic unit of these compounds. As a consequence, BODIPY optical properties can be designed to tune their absorption and emission in an especially wide wavelength range. A large amount of experimental and computational studies has been performed to investigate the electronic excited states of many structurally different BODIPY dyes. On the other hand, vibrational properties are by far less known for these compounds. We have therefore measured detailed infrared and Raman spectra of a model compound, namely, a BODIPY derivative with four methyl groups and a phenyl ring as substituents. The experimental spectra of the solid sample have been contrasted with ab initio spectra computed at the CAM-B3LYP/6-31G+(d) level. Computations have been performed both for the isolated molecule and including the crystalline environment. In the latter case, better agreement has been observed. An assignment is proposed for the 123 vibrational modes. These results form the basis for further spectroscopic studies on complex BODIPY derivatives.

Vibrational spectra of second generation antidiabetic drug gliquidone exhibiting anticancer activity, antioxidant activity using both the experimental and theoretical approach

The prevalence of diabetes mellitus in world is hundreds of millions and still skyrocketing. Diabetes mellitus damages the entire vital system and leads to a mortality rate and it is a serious threat to human life. It is high time to develop an effective drug with desired and selective characteristics. GQD is a second generation FDA approved drug that evokes current research interest owing to its pharmaceutical application, such as antidiabetic activity, which is utilized to treat type 2 diabetes mellitus. An efficient approach for examining the physicochemical properties of the drug is Density Function Theory (DFT). Optimization of GQD has been carried out with the help of Becke 3- parameter Lee Yan Parr with 6–311 G** basis set. Stability, intramolecular interaction, intermolecular interaction, hyperconjugation, and delocalization of the system have been analysed using the Natural Bond Orbital (NBO) analysis. GQD has been subjected to FTIR and FT-Raman characterization, and MOLVIB 7 software has been utilized to assign the normal modes of vibrations. Frontier molecular study reveals a small energy gap, and this predicts the molecule to be more reactive. The molecular Electrostatic Potential (MEP) mapped surface shows the potential binding site, and this is responsible for the pharmaceutical activities. Mulliken population and Natural population analysis show the reactive sites of the molecule. GQD has been tested as a promising molecule with antioxidant and anticancer activity.

A Three-Dimensional Method for Analysis of the Body Mode of Classical Guitars Using a Laser Displacement Sensor.

In classical guitar acoustic spectra, the lowest frequency body mode's amplitude often significantly surpasses that of the string overtones. However, the characteristics of the body mode have not been systematically utilized to quantitatively represent the timbre of classical guitars. In this study, we propose a quantitative method for describing the body mode, which can effectively differentiate the timbre of classical guitars. Our approach involves three key parameters presented in a three-dimensional space, as follows: the frequency and quality factors of the body mode, along with the amplitude ratio of the plucked string note to the body mode in the soundboard's vibration spectrum. This representation allows for the visualization, quantitative comparison, and classification of the body mode note and damping properties across classical guitars. The differences in body mode among guitars can be analyzed quantitatively using Euclidean distance.

(Invited) Density Functional Theory Study on Molecular Structures of Polyhydroxy Fullerenes

Polyhydroxy fullerenes (PHF), also known as fullerenols or fullerols, are water-soluble fullerenes that are being studied for several applications. PHF is usually synthesized by acid or alkali method and is assumed to have only hydroxyl groups. These approaches use uncontrolled oxidation method and it is possible to have unintended functionalization. In fact, few studies have proposed presence of hemi-ketal and carbonyl groups based on NMR, XPS and FTIR studies. However, a complete understanding of their molecular structures is still lacking. Theoretical quantum chemical calculations based on density functional theory (DFT) are commonly used to predict and corroborate vibrational spectrum of molecules. Interestingly, in silico studies thus far have considered fullerenes with only hydroxyl groups with a big mismatch in their calculated vibrational energies and experimental FTIR spectrum.In this study, we investigated the presence of carbonyl and hemi-ketal functional groups on hydroxylated fullerenes using DFT. We also evaluated the influence of counterions on oxygen-containing functional groups. All DFT calculations were carried out on Gaussian19 with hybrid B3LYP functional and 6-31G(d,p) basis set. By bridging the gap between theoretical calculations and experimental measurements, we offer an alternative interpretation for the characteristic peaks observed in the FTIR spectrum. Furthermore, our theoretical calculations suggest a dynamic nature inherent in these oxygen-containing functional groups residing on the carbon cage of the fullerene structure.

Surface populations as a model for the distance-dependence of the interfacial refractive index.

Vibrational sum frequency spectra provide information about interfaces that is sensitive to the orientation of molecules, their electronic environment, and the local electric fields. Here, we use molecular dynamics simulations in order to study a surfactant, para-cyanophenol, at the air-water interface. The volume fractions of water and the organic surfactant are considered at various points over the nanometer-scale region in a Lorentz-Lorenz model. We find that the calculated ratios of nonlinear susceptibility tensor elements are in agreement with experimental data only when this depth profile was considered. We also use these data to evaluate the ratio of the C-N hyperpolarizability tensor elements in the interfacial region.

Temperature dependence of spatial nanoheterogeneities of shear modulus in supercooled glycerol.

The boson peak in the terahertz vibrational spectrum carries information about nano-heterogeneities in the shear modulus in glass formers. Its evolution upon heating or cooling in a supercooled liquid state may shed light on the temperature dependence of heterogeneities. For this purpose, an analysis of the light scattering spectra of supercooled glycerol in the spectral range of the boson peak and fast relaxation was carried out and the parameters of the boson peak in the temperature range 180-330K were determined. The temperature dependent frequency of the boson peak was then expressed in terms of the mean-square amplitude of the shear modulus fluctuations. This was done using the heterogeneous elasticity theory in combination with the perturbation theory on small fluctuations and Ioffe-Regel criterion for transverse vibrations in glass formers. The contribution of structural relaxation effects to phonon damping becomes significant with increasing temperature. It is shown here that structural relaxation largely determines the temperature dependence of the mean-square fluctuations of the shear modulus at high temperatures. By solving the inverse problem, the temperature dependence of shear modulus fluctuations was obtained. It shows a rapid decrease above ∼250K with a linear extrapolation going to zero at the so-called Arrhenius temperature TA = 350K. Comparison with literature data on the Landau-Placzek ratio shows that they have a similar temperature dependence at T < TA, which is explained by the appearance of nanometer scale spatial heterogeneities below TA. This is confirmed by the temperature dependence of the amplitude of the boson peak.

Analysis of the nonlinear optical properties, vibrational spectra, DFT method and photovoltaic performance of cyanidin-3-rutinoside chloride

This study aims to identify a cyanidin-3-rutinoside chloride that exhibits both photovoltaic performance and nonlinear optical properties, which may be utilized in the field of optoelectronics. Prior to investigating these properties, the stable structure must be determined. For this purpose, its conformational analysis is performed by the Molecular Force Field method with the spartan program. The exact nature of the stable configuration has been ascertained by empirical evidence. The energy of the stable configuration is -1654184.76 kcal/mol, and its dipole moment is 9.94 Debye. Cyanidin-3-rutinoside chloride has been investigated using experimental FT-IR and Raman spectroscopies. Meanwhile, the DFT method at the B3LYP/6-311 + + G(d, p) level was employed in order to study the simulated FT-IR and Raman spectra, the HOMO-LUMO analysis, the molecular electrostatic potentials (MEP), and the non-linear optical (NLO) characteristics of the title molecule. The HOMO and LUMO energies are − 6.45 and − 3.64 electron volts (eV), respectively, with a gap value of 2.81 eV. Additionally, the title compound’s open-circuit voltage, the transition density matrix light-harvesting efficiency, driving force, and binding energy were calculated with by taking photovoltaic cell properties into account. Furthermore, investigations of hole reorganization energy, electron reorganization energy, and total reorganization energy were carried out at the B3LYP/6-31G(d, p) level for the cyanidin-3-rutinoside chloride of interest. In addition, density of state calculations and NBO were made at the B3LYP/6-31G(d, p) level. We calculated the following values for LHE, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{V}_{oc}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{{\\Delta\\:}\ ext{G}}_{\ ext{i}\ ext{n}\ ext{j}\ ext{e}\ ext{c}\ ext{t}}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{E}_{b}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{\\lambda\\:}_{h}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{\\lambda\\:}_{e}$$\\end{document} and \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{\\lambda\\:}_{total}$$\\end{document} : 0.06, 2.45 eV, 0.20 eV, 0.56 eV, 0.50 eV, 0.57 eV and 1.06 eV, respectively.

Physicochemical properties of 2-amino-5-methylpyridinium 3-carboxy-4-hydroxybenzenesulfonate single crystal: An efficient material for optoelectronic applications

A novel third-order organic nonlinear optical (NLO) material with promising excellent properties in the crucial NLO application. For the first time high NLO active 2-amino-5-methylpyridinium 5-sulfosalicylic acid (2A5MP3C4H) has been rationally designed and single crystals have been grown by the slow evaporation solution growth technique (SEST). X-ray diffraction analysis revealed that 2A5MP3C4H belongs to the category of triclinic system and has a Centro symmetric space group of P1. Remarkably, the grown crystal exhibits competitive and even superior physical properties including high thermal stability and wider transparency than the standard NLO single crystal. The morphology of the as-grown 2A5MP3C4H crystal was equivalent to the theoretically produced morphology. Fourier transform infrared spectroscopy (FTIR) was used to investigate the molecular vibrations of 2A5MP3C4H. The optical characteristics of 2A5MP3C4H recorded optical transmittance spectrum reveals that the 2A5MP3C4H crystal possesses good optical transparency in the range between ultraviolet (UV) and near-infrared (NIR) regions. Intriguingly, the short cut-off edge of the grown crystal is found to be about 345 nm which is more favourable for developing modern photonic and optoelectronic devices application. The Laser Damage Threshold (LDT), were investigated to understand its effectiveness to be utilized in the area of optoelectronics and photonics. The thermal and mechanical stability of 2A5MP3C4H was tested using Thermo gravimetric Differential Thermal Analysis (TG-DTA) and Vickers hardness test. The third-order nonlinear optical properties of 2A5MP3C4H single crystals were analyzed, which involves studying the absorption coefficient and refractive index behaviour using a continuous wave laser. Additionally, the grown crystal exhibits outstanding third-order NLO response and wide LDT, which are crucial characteristics for developing practical NLO devices. There are various 2-amino-5-methylpyridine (2A5MP) derivative single crystals available in the literature. However 2A5MP3C4H crystal has not been reported earlier. So, we have carried out our researcher on this new novel crystal. Our findings consequently open a novel path for the logical design of enormous, thermally stable and NLO-active organic complexes for true NLO applications.

DFT investigation on the design and optimization of icosahedral and octahedral beryllium nitride (Be3N2)x fullerene analogue. A comparative study with isosymmetry carbon fullerene

In this contribution, based on density Functional Theory, we focus on studying the structural and dynamic stability of octahedral and icosahedral beryllium nitride (Be3N2)x fullerenes and their symmetry equivalent carbon molecules. The icosahedron structure of beryllium nitride and carbon-based fullerenes shows hybrid features, between a sphere and a polyhedron. Nevertheless, the cohesive energies of carbon fullerenes are slightly lower than those of beryllium nitride based on Be3N2 units. Although icosahedral Ih (1,1) and Ih (2,2) (Be3N2)30 and (Be3N2)120 are energetically slightly less favorable than their corresponding carbon fullerenes, they showed chemically stable structures. IR & Raman spectra are also simulated using a coupled-perturbed KS/HF scheme permitting their identification. Importantly, no imaginary frequency is recorded in their vibrational spectra which confirms an inherent dynamic stability. These results provide valuable insights that can be extrapolated to other noncarbon nanostructures containing pentagonal rings or pentagonal defects.

Analyze and assess the spectral, DFT, and medicinal characteristics through targeted pharmacological investigation of 2-(3-(5-(4-chlorophenyl)furan-2-yl)acryloyl)-3,4-dihydro-2H-naphthalen-1-one (CHFADN)

The compound 2-(3-(5-(4-chlorophenyl)furan-2-yl)acryloyl)-3,4-dihydro-2H-naphthalen-1-one (CHFADN) was synthesized using the Claisen-Schmidt condensation method, reacting aromatic aldehydes with methyl ketones. Characterization was performed using NMR, FTIR, and UV-visible spectroscopy. A theoretical model was developed with Gaussian 09 software, utilizing the B3LYP/6-311++G(d,p) basis set, to investigate geometric, electronic, and spectroscopic properties, including geometry optimization, harmonic vibration simulations, molecular electrostatic potential (MEP), frontier molecular orbitals (FMOs), and Mulliken's population analysis. A scaling factor of 0.9600 ensured alignment between the compound's vibrational spectrum and the experimental IR spectrum.In-vitro testing showed notable bactericidal efficacy,H2O2 scavenging activity and antidiabetic activity. In silico molecular docking using AutoDock 4.0, focusing on the 1HD2 protein's active pocket, revealed a binding interaction energy of -6.5 kcal/mol. ADME properties were predicted based on retention data (RM0). The compound showed no mutagenic effects in toxicity testing, indicating a promising safety profile for new drug candidates.

Carbonyl stretching band in amides as Lorentz oscillator. Insights into anharmonicity and local environment in the liquid phase from NIR and MIR spectra of N-methylformamide and di-N,N-methylformamide

We investigated the anharmonicity and intermolecular interactions of N-methylformamide (NMF) and di-N,N-methylformamide (DMF) in the neat liquid phase with particular interest in the amide bands. The vibrational spectra, complex refractive index, and complex electric permittivity were determined in in the mid- (MIR) and near-infrared (NIR) regions (11,500–560 cm−1; 870–17857 nm). Dispersion analysis was based on the Classical Damped Harmonic Oscillator (CDHO) and simultaneous modelling of the real and imaginary components of the spectra. This data delivered insights into the vibrational energy dissipation and self-association in liquid amides. Identification of the MIR and NIR bands was based on anharmonic GVPT2//B3LYP/6-311++G(d,p) calculations. DMF and NMF follow distinct self-association, evidenced in the MIR fingerprint by the two components of the νCO, the analog of the Amide I band. These conclusions are supported by the structural information derived from the NIR spectra. Furthermore, the contribution of overtones and combination bands in the MIR spectra of amides was examined. The conclusions on molecular interactions and structural dynamics of NMF and DMF contribute to a deeper understanding of the effects of changes in the local environment of the amide group.

Do Molecular Geometries Change Under Vibrational Strong Coupling?

As pioneering experiments have shown, strong coupling between molecular vibrations and light modes in an optical cavity can significantly alter molecular properties and even affect chemical reactivity. However, the current theoretical description is limited and far from complete. To explore the origin of this exciting observation, we investigate how the molecular structure changes under strong light-matter coupling using an ab initio method based on the cavity Born-Oppenheimer Hartree-Fock ansatz. By optimizing H2O and H2O2 resonantly coupled to cavity modes, we study the importance of reorientation and geometric relaxation. In addition, we show that the inclusion of one or two cavity modes can change the observed results. On the basis of our findings, we derive a simple concept to estimate the effect of the cavity interaction on the molecular geometry using the molecular polarizability and the dipole moments.

Influence of calcination temperature on the 3D nanoscale topography of LaMnO3 thin films: A comprehensive surface analysis

In this paper, we present a comprehensive study on the 3D nanoscale topography of LaMnO3 thin films, focusing on the influence of calcination temperature on surface morphology. The study reveals significant structural, chemical, and morphological changes as a function of the calcination temperature. XRD analysis confirmed the formation of the orthorhombic LaMnO3 structure at 700 °C, 750 °C, and 800 °C, with increasing unit cell volume and crystallite size observed at higher temperatures. FTIR spectra identified characteristic functional groups associated with molecular vibrations, indicating the perovskite structure. SEM imaging showed grain growth with temperature, while EDS analysis confirmed compound formation and substrate interactions. AFM analysis revealed increased surface roughness with temperature, attributed to nucleation and crystal growth. Morphological and microtextural analyses further detailed changes in surface features, peaks, valleys, and voids. Fractal characterization highlighted variations in surface texture with temperature, with a decrease in dominant wavelength indicating changes in microtexture complexity. Overall, the findings provide insights into the temperature-dependent properties of LaMnO3 thin films, essential for optimizing growth conditions and understanding their potential applications in various fields.

Exploring Excited State Landscapes with Surface Enhanced Hyper-Raman Spectroscopy.

In this Perspective, we provide a historical overview of the surface-enhanced hyper-Raman scattering (SEHRS) effect, describe its essential components, highlight the close connection between theory and experiment in several vignettes, and discuss recent analytical applications. SEHRS, the two-photon analog of surface-enhanced Raman scattering (SERS), is a spontaneous nonlinear scattering exhibited by molecules in a plasmonic field. Hyper Raman provides distinctive information on the molecular vibrations and electronic excited states of analytes. A 40-year old mystery surrounding the SEHRS spectra of R6G is used to illustrate the power of SEHRS to explore excited electronic states, revealing how non-Condon effects can influence the two-photon molecular properties. The exceptionally large enhancement factors (>1013) obtained from SEHRS enable the analysis of single molecules and molecules at very low concentrations. This high sensitivity is further augmented by an increased sensitivity to chemical effects, allowing SEHRS to probe changes in the local environment and the orientation of surface ligands. As most SEHRS experiments employ near-infrared (NIR) and short-wave infrared (SWIR) light, it also holds promise for bioimaging studies. Before concluding, we discuss future directions and challenges for the field as it moves forward.