Vibrational Frequencies Research Articles

A Novel Vibration Frequency Response Analysis Method for Mechanical Condition Detection of Converter Transformer Windings

A Novel Vibration Frequency Response Analysis Method for Mechanical Condition Detection of Converter Transformer Windings

Dynamic analysis of the three-phase magneto-electro-elastic (MEE) structures with the finite element method enriched by proper enrichment functions

In this study, a carefully designed enriched finite element method (EFEM) is presented to improve the solution accuracy of the conventional FEM by analyzing the dynamic behavior of the magnetic-electric-elastic (MEE) composite structures, which are frequently used in designing various smart and intelligent devices. By formulating the proper EFEM with ideal numerical performance, different enrichment functions are considered and the corresponding solution quality of different versions of the EFEM is compared and examined in great detail. When the Lagrange polynomial basis functions together with the harmonic trigonometric functions are used as enrichment functions, the obtained EFEM shows extremely powerful and ideal numerical performance, which is obviously better than the other versions of EFEM and the conventional FEM, in studying the free vibration and harmonic frequency responses of the MEE structures. Nearly exact numerical solutions for three-phase physical fields of MEE structures can be generated by the proposed EFEM even if very coarse mesh patterns are used. Intensive numerical studies are conducted to confirm and verify the excellent properties of the proposed EFEM in performing dynamic analysis of the MEE structures.

VIBRATIONAL AND X-RAY MEASUREMENTS OF La2Ti2O7 UNDER HIGH PRESSURE CONDITION

The present study focuses on investigating the impact of high-pressure conditions on the crystal structure and vibration spectra of the perovskite-like layered compound La2Ti2O7. To this end, X-ray diffraction and Raman spectroscopy techniques were employed to observe the behavior of the compound under pressure levels up to 30 GPa. The neutron diffraction at ambient pressure confirms that the structure of La2Ti2O7 is monoclinic P21. The results indicate that when the pressure attains 17.3 GPa, the original monoclinic phase of P21 symmetry undergoes a phase transition to the monoclinic phase of P2 symmetry. The observed pressure-induced phase transitions in La2Ti2O7 are associated with anomalous changes in both the unit cell parameters and the vibrational modes. Additionally, the study obtained the baric dependences of lattice parameters, unit cell volume and vibration frequencies, which were used to calculate the bulk modules for the initial and pressure-induced phases of La2Ti2O7.

Effect of the porous structure on the hygrothermal vibration analysis of functional graded nanoplates using nonlocal high-order continuum plate model

AbstractThis study delves into the thermomechanical vibration behavior of functionally graded porous nanoplates under extreme thermal temperature and humidity conditions. The equation of motion of the nanoplate was derived using advanced theories in elasticity and deformation. The nanoplate consists of metal (SUS304) on the bottom surface and ceramic (Ni3S4) on the top surface, with the material distribution changing according to the power law across the plate thickness. The nanoplate was modeled with uniform and symmetric distributions of porosity reaching as high as 60%. Upon incorporating the thermal and moisture loads from the humid surroundings into the equations of motion derived from Hamilton's principle, the equations were solved using Navier's method and simplified to the eigenvalue equation. Analyzed within a broad framework are the thermomechanical vibration behavior of the nanoplate, temperature impact, humidity influence, porosity and its distribution, material grading parameter effects, and nonlocal integral elasticity effects. Observations indicate that variations in thermal temperature, humidity, and nonlocal parameters can lower the thermomechanical vibration frequency of the nanoplate, whereas porosity has the opposite effect. The effects mentioned are influenced by factors, such as the porosity ratio, porosity distribution, material ratios, and the size of the nonlocal parameter in the plate. The primary objective of this work is to uncover the nonlinear frequency response of nanoplates with high porosity in conditions characterized by high temperature and humidity.

Study on coupled mode flutter parameters of large wind turbine blades

As the size of wind turbine blades increases, the flexibility of the blades increases. In actual operation, airflow flow can cause aerodynamic elastic instability of the blade structure. Long blades may experience coupled mode flutter due to the bending torsion coupling effect, leading to blade failure. Based on Euler Bernoulli beam theory combined with Theodorsen non directional aerodynamic loads, a blade flutter characteristic equation is established through finite element method. Taking NREL 5 MW wind turbine blades as an example, analyze the influence of parameter changes in different regions of the blades on flutter characteristics. Research has found that paramter changes in the tip region of blade have the greatest impact on flutter characteristics. The vibration frequency shows an overall upward trend with the increase of waving stiffness and torsional stiffness. The flutter velocity of the three regions tends to stabilize as the bending stiffness decreases. The blade flutter speed increases with the increase of torsional stiffness. The radius of gyration is inversely proportional to the flutter frequency and flutter velocity. The impact of centroid offset on blade structure flutter frequency is minimal, but the centroid offset in the tip region has a greater impact on flutter velocity. Increasing the torsional frequency can prevent coupled mode flutter and provide a theoretical basis for blade flutter prevention design.

Vibration-Assisted Welding of 42CrMo4 Steel: Optimizing Parameters for Improved Properties and Weldability.

This study advances the vibration-assisted welding (VAW) technique for joining medium-carbon, low-alloy steels, which are typically challenging to weld. Traditional welding methods suggest low linear energy and mandatory pre- and post-heating due to these steels' poor weldability. However, VAW employs a vibrating table to maintain part vibration throughout the automatic MIG/MAG welding process. This study tested the VAW technique on 42CrMo4 steel samples, achieving satisfactory weld quality without the need for pre- and post-heating treatments. This research revealed that while vibration frequencies between 550 Hz and 9.5 kHz minimally affect the appearance of the weld joint, the oscillation acceleration has a significant impact. The acceleration along the weld axis (ax), combined with the welding speed and vibration frequency, affects the weld surface's appearance, particularly its scaly texture and size. Lateral acceleration (ay) alters the seam width, whereas vertical acceleration (az) affects penetration depth at the root. Notably, if the effective acceleration (aef) surpasses 40 m/s2, there is a risk of molten metal expulsion from the weld pool or piercing at the joint's base. The quality of the joints was assessed through macroscopic and microscopic structural analyses, micro-hardness tests in the weld zone, and bending trials. The mechanical properties of the VAW samples were found to be acceptable, with hardness slightly exceeding that of the samples subjected to pre- and post-heating. Moreover, the VAW process significantly reduced energy consumption and operational time. The employed vibration system, with a power rating of 100 W, operates for just a few minutes, resulting in substantially lower energy usage compared to the traditional pre- and post-heating method, which typically requires a 5 kW electric furnace.

A time averaged semiclassical approach to IR spectroscopy.

We propose a new semiclassical approach to the calculation of molecular IR spectra. The method employs the time averaging technique of Kaledin and Miller upon symmetrization of the quantum dipole-dipole autocorrelation function. Spectra at high and low temperatures are investigated. In the first case, we are able to point out the possible presence of hot bands in the molecular absorption line shape. In the second case, we are able to reproduce accurate IR spectra as demonstrated by a calculation of the IR spectrum of the water molecule, which is within 4% of the exact intensity. Our time averaged IR spectra can be directly compared to time averaged semiclassical power spectra as shown in an application to the CO2molecule, which points out the differences between IR and power spectra and demonstrates that our new approach can identify active IR transitions correctly. Overall, the method features excellent accuracy in calculating absorption intensities and provides estimates for the frequencies of vibrations in agreement with the corresponding power spectra. In perspective, this work opens up the possibility to interface the new method with the semiclassical techniques developed for power spectra, such as the divide-and-conquer one, to get accurate IR spectra of complex and high-dimensional molecular systems.

Assigning the CH stretch overtone spectrum of benzene and naphthalene with extension to anthracene and tetracene using 2- and 3-quanta anharmonic quantum chemical computations.

The CH stretch overtone region (5750-6300 cm-1) of benzene and naphthalene is assigned herein using anharmonic quantum chemical computations, and the trend of how this extends to larger polycyclic aromatic hydrocarbons (PAHs) is established. The assignment of all experimental bands to specific vibrational states is performed for the first time. Resonance polyads and the inclusion of 3-quanta vibrational states are both needed to compute accurate vibrational frequencies with the proper density-of-states to match the experimental band shape. Hundreds of 3-quanta states produce the observed band structure in naphthalene, anthracene, and tetracene, and this number is expected to increase drastically for larger PAHs. The width and shape of the main peak are consistent from naphthalene to anthracene, necessitating further exploration of this trend to confirm whether it is representative of all PAHs in the CH stretch overtone region. Understanding observations of PAH sources in the 1-3 μm region from the NIRSpec instrument aboard JWST requires new computational data, and this study provides a benchmark and foundation for their computation.

Mechanical Behavior of Geogrid Flexible Reinforced Soil Wall Subjected to Dynamic Load

The geogrid flexible reinforced soil wall is widely used in engineering practice. However, a more comprehensive understanding of the dynamic behavior of reinforced soil wall is still required for a more reasonable application. In order to explore the mechanical behavior of a geogrid flexible reinforced soil wall, the model test was carried out to investigate the dynamic deformation of geogrid reinforced soil wall subjected to a repeated load. The numerical simulation was also conducted for comparison and extension with regards to the earth pressure and the reinforcement strain. The change rules for the deformation of the wall face, the vertical earth pressure and the reinforcement strain subjected to dynamic load with four frequencies (4, 6, 8 and 10 Hz) and four amplitudes (30–60, 40–80, 50–100 and 60–120 kPa) were obtained. The factors that affect the mechanical behavior of geogrid flexible reinforced soil wall were analyzed. The results show that the dynamic deformation characteristics of reinforced soil wall are affected by the number of vibrations, the amplitude of dynamic load and the frequency of vibration. The maximum lateral displacement of the reinforced soil wall occurs on the third to the fifth layer. With an increase in dynamic load amplitude, the development of dynamic deformation gradually increases, and after a cumulative vibration of 200 × 104 times, the cumulative lateral deformation ratio and the cumulative vertical deformation ratio of the wall face is less than 1%. The vertical earth pressure of geogrid flexible reinforced soil wall increases partially along the length of the reinforcement, and the vertical earth pressure of the third layer is basically unchanged when subjected to a dynamic load. With an increase in vibration number, the change in the reinforcement strain of the third layer is more complex, and the change rules of the reinforcement strain of each layer are different. The reinforcement strain is small, with a maximum value of 0.1%.

The occurrence and mechanism of hysteresis between axial deformation and short‐circuit electromagnetic force during the vibration of power transformer windings

AbstractMechanical stability is one of the core capabilities of power transformers. External short‐circuit accidents are the main cause of winding instability. International Electrotechnical Commission 60076‐5 standard recommends a method to calculate the short‐circuit strength of power transformer windings by comparing the stress within windings under the effect of the maximum electromagnetic force with the critical stress of the winding. This method assumes that the maximum deformation will be produced by the maximum electromagnetic force, which corresponds to the first peak of the waveform. However, owing to the interactions between disks during the vibration process, the maximum deformation may occur after the occurrence of the maximum electromagnetic force. The hysteresis phenomenon between disk deformation and electromagnetic force is studied. The definition of the hysteresis phenomenon during the vibration process is first demonstrated, and the mechanism of the hysteresis phenomenon is investigated. The vibration model is established. By decoupling analysis, the conditions for the formation of hysteresis are proposed, and the mechanism of the hysteresis phenomenon is validated by the experiment, which is conducted on a winding sample. In the deformation formula, the term that determines the time‐varying characteristic is found. The waveform‐determining term is the difference between the two cosine components, whose frequencies are the natural vibration frequency and the electromagnetic force frequency. When the two frequencies are close, the maximum deformation lags behind the maximum force, and the hysteresis phenomenon occurs.

Study on uniformity of linear vibrating rice feeding device with matrix-designed outlets based on discrete element method

The rice filling process is crucial for the Osmanthus Glutinous Rice Lotus Root (OGRLR) industry, and achieving uniform rice feeding is essential for improving filling efficiency. This paper introduces a novel rice feeder with matrix-designed outlets and optimizes its parameters using EDEM through numerical simulation and orthogonal experiments. Single-factor experiments studied parameters like inclination angle, frequency, and amplitude of the vibrating bin and installation angle of horizontal shunt plates. Orthogonal experiments with interaction focus on inclination angles, vibration frequency, and amplitude of the vibrating bin. Results reveal optimal conditions (100Hz frequency, 0.8 mm amplitude, 16° inclination angle, 83° and 86° installation angles of horizontal shunt plates), ensuring the most uniform rice discharge (7.287% variation coefficient). Field experiments validate simulation results. This study demonstrates the efficacy of Discrete element method and orthogonal experiments for optimizing glutinous rice feeding structures, contributing to the advancement of food machinery design.

The Effect of Hyperelasticity and Nonlinearity on the Dynamic Behaviors of Hyperelastic Functionally Graded Beams on Nonlinear Elastic Foundation

Hyperelastic functionally graded materials have a wide range of application prospects in soft robotics and biomedical fields. This paper investigates the nonlinear free and forced vibrations of a hyperelastic functionally graded beam (HFGB) based on higher-order shear deformation beam theory. The geometrical nonlinearity is considered by using the von-Kármán’s nonlinear theory. The three-material-parameter free energy function named as Ishihara model is employed to characterize the hyperelastic material. The power-law gradient form along the thickness direction is adopted. The HFGB is resting on the elastic foundation. The Winkler, Pasternak and nonlinear stiffness coefficients are considered. The time-harmonic external force is applied to the HFGB. The nonlinear governing equations for the vibration of the HFGB are derived by using Hamilton’s principle, and are subsequently transformed into ordinary differential equations via Galerkin’s method. The nonlinear free vibration and primary resonance of the HFGB are investigated analytically by employing the extended Hamiltonian method and multiple scales method, respectively. The results indicate that the power-law index, slenderness ratio, material properties, and elastic foundation parameters have significant influences on the nonlinear frequency of free vibration as well as the frequency–response and force–response curves of forced vibration. The phase plane method is employed to analyze the system’s stability states under various excitation amplitudes. The relative error between the results of the current computational model and the published literature is less than 0.1 percent.

Effects of bio-inspired infill design on the mechanical properties of ultrasonic vibration assisted 3D printed samples

This paper study the tensile strength and microstructure of the 3D bio-inspired printed samples by comparing the ultrasonic vibration assisted test samples with standard ABS and PLA samples with three different bio-inspired infill designs namely elephant trunk, bamboo and leaf. The test samples were printed with optimal printing process parameters and 0 kHz and 20 kHz frequency of ultrasonic vibration. SolidWorks software was used to design the bio-inspired infill designs and create the 3D-printed test samples. Tests to evaluate mechanical properties and microstructure were carried out after printing the test samples. The investigation primarily focuses on the impact of ultrasonic vibration assisted 3D bio-inspired printed samples of ABS and PLA materials. This research explores using ultrasonic vibration assistance to enhance the tensile strength of 3D-printed infills. The elephant trunk inspired infill design with ABS at 20 kHz achieved the best results, suggesting that ultrasonic vibration strengthens intermolecular bonding. The bamboo inspired infill performed poorly due to its design, while PLA deformed due to lower heat resistance. Overall, ultrasonic frequency improved layer bonding, especially for the elephant trunk infill, indicating potential for further optimization. These results demonstrate the effectiveness of bio-inspired infill solutions, mainly the ABS elephant trunks with ultrasonic 20 kHz of vibration.

Coherent molecular vibrational dynamics studied by a 10-fs laser pulse in comparison for selective and nonselective excitation

Various selective excitation methods for molecular vibrations have been developed based on the characteristics of the applied lasers. In the present work, we coherently and selectively excited molecular vibrations up to 3000 cm−1 by irradiation with a sub-10-fs laser pulse. The spectral shaping of this laser pulse enabled us to selectively excite only the target vibrational frequency range (of the model compounds acetonitrile and benzene). Furthermore, the coherent molecular vibrational dynamics were compared between selective and nonselective excitation. The coherence of the molecular vibration persisted until 2–3 ps after photoexcitation, with the lifetime of this coherence being independent of whether the coherent molecular vibration was selective or nonselective excitation.

High-pressure high-temperature synthesis and characterization of B10C

The boron-rich boron carbide materials have been traditionally synthesized by adding boron powder to B4C material and subjecting it to hot pressing sintering for materials composition containing 8.8–20 at. % carbon in boron (composition range of B10.4C to B4C). Our study explores a synthesis route for B10C starting from high-purity boron and carbon and direct conversion under high pressure and high temperature (HPHT) conditions of 2000 °C and 6–8 GPa. Synthesis was verified via x-ray diffraction analysis, showing the conversion of the high-purity boron and carbon powder mixture into a hexagonal B10C structure (R-3m space group) with lattice parameters of a = b = 5.6115 Å and c = 12.197 Å. The concentration of boron was measured through x-ray photoelectron spectroscopy, confirming the B10C ratio. The measured nanoindentation mean hardness of B10C was 40 GPa. Raman spectroscopy of the HPHT synthesized sample shows characteristic vibrational breathing modes of boron icosahedron and an additional intense band at a vibrational frequency of 380 cm−1. This Raman band, which appears notably weaker in earlier studies and B4C samples, is assigned to the linear chain of B–B–B and attributed to the maximal incorporation of boron within the hexagonal structure.

Dual-mode electromagnetic-triboelectric-piezoelectric multifunctional self-charging energy system for efficient capture of kinetic energy

This study presents an innovative dual-mode electromagnetic-triboelectric-piezoelectric multifunctional self-charging energy system (MS-CES) that integrates two different operating modes of electromagnetic generators for contact-separation (CS-EMG) and non-contact (NC-EMG), as well as a triboelectric nanogenerator (TENG) and a piezoelectric nanogenerator (PENG). The system has an energy management circuit that efficiently captures and converts kinetic energy from the environment. We investigate the output performance of each unit of the MS-CES under different vibration frequencies and amplitudes. The units work together through a compact mechanical structure design to achieve high voltage output while shortening charging time based on improved space utilization, thus gaining more efficient energy storage. Polyacrylonitrile (PAN) powder and barium titanate (BTO) composite nanofibre membrane (PAN/BTO) as PENG material further enhances the system's output performance. The system provides a continuous power source for the vibration sensors. It enables human-computer interaction with mobile phones and computers via Bluetooth modules, enabling real-time monitoring and analysis of vibration parameters. Furthermore, we have validated the feasibility of using the MS-CES to power a noninvasive vagus nerve stimulation device, providing new technological means for monitoring and treatment in the medical field.

Shaking table test on damage mechanism of bedrock and overburden layer slope based on the time–frequency analysis method

To systematically analyze the damage caused by bedrock and overburden layer slope under seismic action, a set of large-scale shaking table test was designed and completed. Interpolation of the acceleration amplification coefficient, Hilbert–Huang transform and transfer function was adopted. The damage mechanisms of the bedrock and overburden layer slopes under seismic action are systematically summarized in terms of slope displacement, acceleration field, vibration amplitude, energy, vibration frequency, and damage level. The results show a significant acceleration amplification effect within the slope under seismic action and a localized amplification effect at the top and trailing edges of the slope. With an increase in the input seismic intensity, the difference in the vibration amplitude between the overburden layer and bedrock increased, low-frequency energy of the overburden layer was higher than that of the bedrock, and the vibration frequency of the overburden layer was smaller than that of the bedrock. These differences cause the interface to experience cyclic loading continuously, resulting in the damage degree of the overburden layer at the interface being larger than that of the bedrock, reduction of the shear strength, and eventual formation of landslides. The displacement in the middle of the overburden is always greater than that at the top. Therefore, under the action of an earthquake and gravity, the damage mode of the bedrock and overburden layer slope is such that the leading edge of the critical part pulls and slides at the trailing edge, and multiple tensile cracks are formed on the slope surface.

Adaptivity of a leaf-inspired wind energy harvester with respect to wind speed and direction

Environmental wind is a random phenomenon in both speed and direction, though it can be forecasted to some extent. An example of that is a gust which is an abrupt, but short-time change in wind speed and direction. Being a free and clean source for small-scale energy scavenging, attraction of wind is rapidly growing in the world of energy harvesters. In this paper, a leaf-like flapping wind energy harvester is introduced as the base structure in which a short-span airfoil is attached to the free end of a double-deck cantilever beam. A flap mechanism inspired by scales on sharks’ skin and a tail mechanism inspired by birds’ horizontal tail are proposed for integration to the base harvester to make it adaptive with respect to wind speed and direction, respectively. The use of the flap mechanism increases the leaf flapping frequency by +2.1 to +11.5 Hz at wind speeds of 1.5 to 6.0 m s−1. Therefore, since the output power of a vibrational harvester is a function of vibration frequency, a figure of merit or an efficiency parameter related to the output power will increase, as well. On the other hand, if there is a misalignment between the harvester’s heading and wind direction due to change of the latter one, the harvesting performance deteriorates. Although the base harvester can realign in certain ranges of sideslip angle at each wind speed, when the tail mechanism is integrated into that, it broadens the range of realignable sideslip angles at all the investigated wind speeds by up to 80 ∘ .

Nonlinear optical properties of KnCl (n = 2–7) superalkali clusters

The lowest energy structures along with the low lying isomer, stabilities, electronic properties, optical properties and nonlinear optical responses of KnCl (n = 2–7) clusters were studied within the density functional theory. The second order energy difference, dissociation energy and GH-L (HOMO–LUMO gap) point out that KnCl (n = 3, 5, 7) clusters are more stable. The calculated adiabatic ionization energies (AIE) for the KnCl (n = 2–6) clusters are in agreement with the measured ionization energies. The optical properties, namely optical electronegativity and refractive index, depends on the GH-L energy values. The K atom capped planar rhombus geometry of the K4Cl causes the noticeable vibrational frequency shift compared to the rest of IR spectra of the clusters. The first static hyperpolarizability (β o) values are in the range of 2.33 × 103 –2.87 × 104 au and the second static hyperpolarizability varies between 5.74 × 106 au and 38.9 × 106 au for the cluster. The nonlinear optical response is due to the superalkali nature of KnCl (n = 2–7) clusters. From computed β vec values, the hyperpolarizability has projection on the dipole moment vector for the superalkalis except the K2Cl and K5Cl. The absorption spectra point out that KnCl (n = 6–7) clusters can be suitable as a NLO material since they have transparency in the deep UV region (λ< 300 nm).

Deuteration-Induced Energy Level Structure Reconstruction of Carbon Dots for Enhancing Photoluminescence.

Constrained by a limited understanding of the structure and luminescence mechanisms of carbon dots (CDs), achieving precise enhancement of their photoluminescence (PL) performance without altering the emission wavelength and color remains a challenge. In this work, a deuterated CD is first achieved by simply replacing the reaction solvent from H2O to D2O. The substitution of D atoms for H atoms is not limited on the surface but also within the internal structure of CDs. Deuteration affects the formation of the π-conjugated network structure by altering the content of sp2 carbon and sp3 carbon, ultimately inducing a reconstruction for energy level structure of CDs. Both the intrinsic state and surface state emission, including quantum yield, emission intensity and lifetime, are significantly enhanced after deuteration. It benefits from the reduction in non-radiative transitions, since the lowered vibrational frequencies of D atoms and optimized local energy level distribution in CDs structure. The deuterated CDs are applied in the fabrication of white-light-emitting diodes to show their application potential. This work provides a highly versatile route for improving and controlling photoluminescence performance of CDs and has opportunities to guide the development of CDs for practical applications.