Vertical External Cavity Surface Emitting Laser Research Articles

Time localized tilted beams in nearly-degenerate laser cavities.

We show that nearly-degenerate Vertical External-Cavity Surface-Emitting Lasers may emit a set of tilted beams of individually addressable mode-locked pulses. These time localized beams feature a Gaussian profile and they are emitted in pairs with opposite transverse k-vector. Because they are phase locked, their interference leads to a non homothetic pattern in the near-field emission of the laser. In the simplest situation, when a single pair is emitted, this is a stripe pattern. Our analysis discloses the role of third order (spherical) aberrations of the cavity in stabilizing this spatio-temporal mode-locked regime and in selecting the value of the transverse k-vector.

108 m Underwater Wireless Optical Communication Using a 490 nm Blue VECSEL and an AOM.

Advanced light sources in the blue-green band are crucial for underwater wireless optical communication (UWOC) systems. Vertical-external-cavity surface-emitting lasers (VECSELs) can produce high output power and good beam quality, making them suitable for UWOC. This paper presents a 108 m distance UWOC based on a 100 mW 490 nm blue VECSEL and an acousto-optic modulator (AOM). The high-quality beam, which is near diffraction-limited, undergoes relatively small optical attenuation when using a conventional avalanche photodiode (APD) as the detector and employing 64-pulse position modulation (PPM). At the time-slot frequency of 50 MHz, the bit error rate (BER) of the UWOC was 2.7 × 10-5. This is the first reported AOM-based UWOC system with a transmission distance over 100 m. The estimated maximum transmission distance may be improved to about 180 m by fully utilizing the detection accuracy of the APD according to the measured attenuation coefficient of the blue VECSEL used. This type of UWOC system, composed of a high-beam-quality light source and a conventional detector, make it more closely suited to practical applications.

Single-frequency optical parametric oscillator intracavity-pumped by a visible VECSEL for low-noise down-conversion to 1.55 µm.

We report, to the best of our knowledge, the first optical parametric oscillator (OPO) pumped by a visible AlGaInP-based vertical-external-cavity surface-emitting laser (VECSEL). Tunable emission over 1155-1300 nm in the signal and 1474-1718 nm in the idler are observed by temperature adjustment of a 40 mm-long 5%-MgO:PPLN crystal intracavity-pumped at 690 nm. When optimized for low oscillation threshold, and by implementing resonant idler output-coupling (TOC = 1.7%), extracted output powers of 26.2 mW (signal) and 5.6 mW (idler; one-way) are measured, corresponding to a total down-conversion efficiency and extraction efficiency of 70.2% and 43%, respectively. Further, a total down-conversion efficiency of 72.1% is achieved in the absence of idler output-coupling. Of particular interest for high-precision applications, including quantum optics experiments and squeezed light generation, high stability and single-frequency operation are also demonstrated. We measure RMS stabilities of 0.4%, 1.8% and 2.3% for the VECSEL fundamental, signal and idler, with (resolution-limited) frequency linewidths of 2.5 MHz (VECSEL) and 7.5 MHz (signal and idler).

Experimental characterization of quasiperiodic route to chaos in a VECSEL with SESAM

We analyze the temporal dynamics of an optically-pumped quantum well vertical external-cavity surface-emitting laser (VECSEL) with a Semiconductor Saturable Absorber Mirror (SESAM) using the time series obtained when varying the pump power. We unveil the quasiperiodic route to chaos in the system by characterizing the Fourier spectra, the attractors in phase space, and the Lyapunov exponents for each temporal behavior observed: periodicity, quasiperiodicity, and chaos. Thus, we provide a complete description of this experimental observation of the route to chaos in a VECSEL-SESAM system.

Investigation of noise correlations in the phase-locked class-A VECSEL array

We theoretically and experimentally study the noise correlations in an array of lasers based on a VECSEL (Vertical External Cavity Surface Emitting Laser) architecture. The array of two or three lasers is created inside a planar degenerate cavity with a mask placed in a self-imaging position. Injection from each laser to its neighbors is created by diffraction, which creates a controllable complex coupling coefficient. The noise correlations between the different modes are observed to be dramatically different when the lasers are phase-locked or unlocked. These results are well explained by a rate equation model that takes into account the class-A dynamics of the lasers. This model permits the isolatation of the influence of the complex coupling coefficients and of the Henry α-factor on the noise behavior of the laser array.

Single-Chip Switchable Dual-Wavelength Vertical External-Cavity Surface-Emitting Laser

Dual-wavelength output devices have a wide range of applications in mid-infrared band difference frequency generation, anti-interference lidar, dual-wavelength holographic interferometry, and other applications. Vertical external cavity surface-emitting lasers (VECSELs) are a type of semiconductor laser that can achieve single-chip dual-wavelength output by designing the chip structure. In this paper, we present a single-chip VECSEL that can switch between dual-wavelength and single-wavelength output modes. The VECSEL can simultaneously emit coaxial laser beams at 967 nm and 1013 nm, with a wavelength spacing of about 45 nm. The degree of mismatch between the gain peaks of the two quantum wells in the gain chip and the corresponding cavity modes is different. By adjusting the pump power, the temperature of the active region can be changed, which alters the matching relationship between the gain peaks and the cavity modes and controls the output mode of the VECSEL. The dual-wavelength output mode maintains a stable wavelength spacing at different operating temperatures. The laser output mode can be switched between single-wavelength and dual-wavelength, and the beam divergence angle is less than 8°. The dual-wavelength output power can exceed 400 mW, and the long-wavelength output power can reach up to 700 mW.

Spatiotemporally reconfigurable light in degenerate laser cavities

We show that a III-V semiconductor vertical external-cavity surface-emitting laser (VECSEL) can be engineered to generate light with a customizable spatiotemporal structure. Temporal control is achieved through the emission of temporal localized structures (TLSs), a particular mode-locking regime that allows individual addressing of the pulses traveling back and forth in the cavity. The spatial profile control relies on a degenerate external cavity, and it is implemented due to an absorptive mask deposited onto the gain mirror that limits the positive net gain within two circular spots in the transverse section of the VECSEL. We show that each spot emits spatially uncorrelated TLSs. Hence, the spatiotemporal structure of the light emitted can be shaped by individually addressing the pulses emitted by each spot. Because the maximum number of pulses circulating in the cavity and the number of positive net-gain spots in the VECSEL can be increased straightforwardly, this result is a proof of concept of a laser platform capable of handling light states of scalable complexity. We discuss applications to three-dimensional all-optical buffers and to multiplexing of frequency combs that share the same laser cavity.

Improved underwater wireless optical communication using a passively mode-locked VECSEL

This paper presents improved underwater wireless optical communication (UWOC) based on a 490 nm passively mode-locked vertical-external-cavity surface-emitting laser (VECSEL) with the repetition rate of 1.46 GHz and the pulse width of 2.25 ps. After conducting a comprehensive evaluation of the performance characteristics of quasi-cyclic low-density parity-check (QC-LDPC) coding and pulse-position modulation (PPM) in relation to bit-error-rate (BER) and communication capacity across different signal-to-noise ratios (SNRs), a passively mode-locked VECSEL based UWOC system is designed and experimentally performed. The UWOC system employs the QC-LDPC encoding technique and PPM modulation scheme that are most suitable for the system. Compared with the case without QC-LDPC, the minimum received optical power with coding is improved by 3.5 dBm, and the SNR with coding is improved by 0.4 dB under condition of 256-PPM and forward error correction (FEC) threshold of 3.8×10−3. Meanwhile, compared with the UWOC system using a continuous-wave (CW) VECSEL as the light source, the attenuation coefficient of the UWOC system based on the mode-locked VECSEL is decreased by 0.04 m-1, and the BER of the mode-locked VECSEL based UWOC system is decreased by 0.3 dB.

Low phase noise operation of a cavity-stabilized 698 nm AlGaInP-based VECSEL.

We report for the first time a high performance, single frequency AlGaInP-based VECSEL (vertical-external-cavity surface-emitting-laser) with emission at 698 nm, targeting the clock transition of neutral strontium atoms. Furthermore, we present comprehensive noise characterization of this class-A semiconductor laser, including the residual fast phase noise in addition to the frequency and relative intensity noise. The low noise VECSEL has output power at around 135 mW with an estimated linewidth of 115 Hz when frequency stabilized via the Pound-Drever-Hall (PDH) technique to a high finesse reference cavity, without intermediate stabilization. The phase noise is measured to be below -126 dBc/Hz for frequencies between 10 kHz and 15 MHz with a total integrated phase noise of 3.2 mrad, suitable not only for ultra-cold neutral strontium-based quantum technologies, such as optical clocks, but also with potential for atom-interferometry applications.

Optical injection locking of a THz quantum-cascade VECSEL with an electronic source.

Optical injection locking of a metasurface quantum-cascade (QC) vertical-external-cavity surface-emitting laser (VECSEL) is demonstrated at 2.5 THz using a Schottky diode frequency multiplier chain as the injection source. The spectral properties of the source are transferred to the laser output with a locked linewidth of ∼1 Hz, as measured by a separate subharmonic diode mixer, and a locking bandwidth of ∼300 MHz is achieved. The large locking range is enabled by the microwatt power levels available from modern diode multipliers. The interplay between the injected signal and feedback from external reflections is studied and demonstrated to increase or decrease the locking bandwidth relative to the classic locking range depending on the phase of the feedback.

Generating dual-wavelength VECSEL by selecting birefringence filter material and the application toward mid-infrared region via intracavity OPO.

A method for realizing a synchronized watt-level dual-wavelength vertical-external-cavity surface-emitting-laser (VECSEL) by using a tilted birefringence filter (BRF) is demonstrated. It is verified that by selecting suitable BRF material with different refractive index differences between extraordinary wave and ordinary wave, the dual-wavelength emission with a free spectrum range from sub-THz to tens of THz can be achieved. The output characteristics of such a dual-wavelength VECSEL are thoroughly investigated including its wavelength tunability and power difference. Finally, the intracavity optical parametric oscillator is applied to efficiently convert the dual-wavelength laser toward the mid-infrared region. The gain competition and longitudinal mode hopping performances for the multi-wavelength mid-infrared output are explored.

High-power and low-threshold 1200 nm InGaAs/GaAs quantum-wells VECSEL grown by MOCVD

Here, we demonstrate an InGaAs/GaAs quantum-wells (QWs) based vertical-external cavity surface emitting laser (VECSEL) with multi-watt emitting beyond 1200 nm. The development is motivated by the need for high-performance 1200 nm laser sources, which are located in the C–H bond photoacoustic tomography window and atmospheric transmission band. In the exploration, strain compensation, epitaxy growth, and package strategy are all optimized for effective performance improvement. Highly strained InGaAs/GaAs QWs epitaxy structures are grown on GaAs substrate with high crystalline quality by metal-organic chemical vapor deposition (MOCVD) technology. With effective thermal management, the thermal impedance of the chip is as low as about 0.92 K/W. As a result, the 1200 nm VECSEL can emit a power of 9.4 W under continuous wave (CW) operation, and the threshold pump power density is as low as about 1.61 kW/cm2. The VECSEL can also operate at a quasi-continuous wave (QCW) emission with tunable pulse width and repetition rates. Under a duty cycle of ∼9.5%, the VCSEL is with a peak power of 16.6 W and a slope efficiency of about 15.5%, and the corresponding pulse energy is as high as about 1.57 mJ. No thermal rollover is observed. This exploration significantly broadens the VECSEL performance and can be regarded as an extension and enrichment of the earlier works on this topic.

Broadband 1.5 GHz VECSEL-Based Laser System for High Speed Multicontrast Nonlinear Imaging

We demonstrate a 1.5 GHz broadband laser system based on a passively mode-locked Vertical-External-Cavity Surface-Emitting-Laser (VECSEL) for high speed nonlinear imaging. The 300 nm wide supercontinuum generated via photonic crystal fiber (PCF) coupled with pulse shaping by means of multiphoton intrapulse interference phase scan (MIIPS) allows us to procedurally filter out spectral windows of interest for nonlinear imaging applications as well as compress the resulting pulses to their transform-limited duration. The intrinsically high repetition rate our system is operating at matches the typical fluorescence lifetime of many biological samples, making it an ideal source for rapid nonlinear bio-imaging while mitigating the risks of photobleaching and photodamage.

High output power, single mode, and TEM00 operation of a multiple gain chip VECSEL using a twisted-mode configuration.

A vertical external cavity surface emitting laser (VECSEL) has been developed for a sodium guide star application. Stable single frequency operation with 21 W of output power near 1178 nm with multiple gain elements while lasing in the TEM00 mode has been achieved. Higher output power results in multimode lasing. For the sodium guide star application, the 1178 nm can be frequency doubled to 589 nm. The power scaling approach used involves using multiple gain mirrors in a folded standing wave cavity. This is the first demonstration of a high power single frequency VECSEL using a twisted-mode configuration and multiple gain mirrors located at the cavity folds.

VECSEL systems for quantum information processing with trapped beryllium ions

We demonstrate two systems based on vertical-external-cavity surface-emitting lasers (VECSELs) for producing ultraviolet laser light at wavelengths of 235 and 313 nm. The systems are suitable for quantum information processing with trapped beryllium ions. Each system consists of a compact, single-frequency, continuous-wave VECSEL producing high-power near-infrared light, tunable over tens of nanometers. One system generates 2.4 W at 940 nm, using a gain mirror based on GaInAs/GaAs quantum wells, which is converted to 54 mW of 235 nm light for photoionization of neutral beryllium atoms. The other system uses a gain mirror based on GaInNAs/GaAs quantum wells, enabling wavelength extension above 1200 nm with manageable strain in the GaAs lattice. This system generates 1.6 W at 1252 nm, which is converted to 41 mW of 313 nm light that is used to laser cool trapped 9Be+ ions and quantum state preparation and detection. The 313 nm system is also suitable for implementing high-fidelity quantum gates.

Microsecond pulsed yellow emission by intracavity doubled optically pumped two-chip VECSEL

A quasi-continues-wave (QCW) 100 μs pulsed yellow laser at 589 nm, based on intracavity frequency doubling (ICFD) of identical two-chip vertical-external-cavity surface-emitting laser (VECSEL) with bow-tie configuration, is demonstrated. Each VECSEL chip is optically QCW-pumped by an 808 nm laser diode, emitting a fundamental wavelength around 1178 nm. A birefringence filter is inserted in the laser cavity to select the linear p-polarized oscillation and tune the operation wavelength. Using a lithium-triborate (LiB3O5) as the frequency doubled crystal, a total frequency doubled output power of 264 mW at 589 nm is achieved, operating at a pulse duration of 194 μs and a pulse repetition rate of 1 kHz. A good beam quality factor is measured to be M 2 = 2.15. These results represent a novel scheme for the QCW multiple gain chips VECSEL ICFD system, opening up a new perspective for the realization of impact long pulse 589 nm laser for sodium guide-star.

3-W output power from a 2-µm InGaSb VECSEL using a hybrid metal-semiconductor Bragg reflector

We present improved thermal management of an optically-pumped vertical external cavity surface emitting laser (VECSEL) at a center wavelength of around 2 µm. This was achieved with a backside-cooled, InGaSb-based VECSEL using a hybrid metal-semiconductor Bragg reflector. We demonstrate the fabrication of such a hybrid metal-semiconductor mirror by combining a copper mirror with 10.5 AlAs0.08Sb0.92/GaSb distributed Bragg reflector (DBR) pairs. Together with a thin 20 nm SiO2 diffusion barrier we reach >99.9 % reflectivity at 2 µm. This allows for a thinner gain chip design compared to the standard DBR requiring 19.5 layer pairs. The structure thickness was reduced from 7.5 µm to 4.7 µm lowering the thermal resistance of the device from (2.79±0.16) K W−1 to (2.12±0.19) K W−1. We demonstrate record high average continuous wave (cw) output powers of 3 W for backside-cooled InGaSb-based VECSELs.

Wavelength Scaling of Widely-Tunable Terahertz Quantum-Cascade Metasurface Lasers

Terahertz (THz) external-cavity lasers based on quantum-cascade (QC) metasurfaces are emerging as widely-tunable, single-mode sources with the potential to cover the 1--6 THz range in discrete bands with milliwatt-level output power. By operating on an ultra-short cavity with a length on the order of the wavelength, the QC vertical-external-cavity surface-emitting-laser (VECSEL) architecture enables continuous, broadband tuning while producing high quality beam patterns and scalable power output. The methods and challenges for designing the metasurface at different frequencies are discussed. As the QC-VECSEL is scaled below 2 THz, the primary challenges are reduced gain from the QC active region, increased metasurface quality factor and its effect on tunable bandwidth, and larger power consumption due to a correspondingly scaled metasurface area. At frequencies above 4.5 THz, challenges arise from a reduced metasurface quality factor and the excess absorption that occurs from proximity to the Reststrahlen band. The results of four different devices — with center frequencies 1.8 THz, 2.8 THz, 3.5 THz, and 4.5 THz — are reported. Each device demonstrated at least 200 GHz of continuous single-mode tuning, with the largest being 650 GHz around 3.5 THz. The limitations of the tuning range are well modeled by a Fabry-Pérot cavity which accounts for the reflection phase of the metasurface and the effect of the metasurface quality factor on laser threshold. Lastly, the effect of different output couplers on device performance is studied, demonstrating a significant trade-off between the slope efficiency and tuning bandwidth.

Polarization dynamics of a vertical external-cavity surface-emitting laser with a saturable absorber mirror.

We investigate experimentally the polarization dynamics of a vertical external-cavity surface-emitting laser with a saturable absorber mirror in the cavity. We demonstrate that the normalized Stokes parameters and degree of polarization are functions of time reaching extreme values around the pulse peaks. Our experiments show that light is elliptically polarized, being able to have a circular right-handed or left-handed component, depending on the orientation of the saturable absorber mirror.

Temporal localized Turing patterns in mode-locked semiconductor lasers

Spatiotemporal mode-locking is a promising lasing regime for developing coherent sources for multimode nonlinear photonics. In this paper we show that large-aspect-ratio vertical external-cavity surface-emitting lasers (VECSELs) can be operated in this regime. The emitted pulses exhibit a spatial profile resulting from the phase locking between an axial plane wave and a set of tilted waves having a hexagonal arrangement in the Fourier space. Moreover, we show that these pulsating patterns are temporally localized, i.e., they can be individually addressed by pulsing the optical pump. The theoretical analysis discloses that the emergence of these pulsating patterns is a signature of a Turing instability whose critical wave vector depends on the spherical aberrations of the optical elements. Our result reveals that large-aspect-ratio VECSELs offer unique opportunities for studying fully developed spatiotemporal dynamics and for applications to multidimensional control of light.