Ventrodorsal Direction Research Articles

Assessment Accuracy of 2D vs. 3D Imaging for Custom-Made Acetabular Implants in Revision Hip Arthroplasty.

Revision total hip arthroplasty (rTHA) presents significant challenges, particularly in patients with severe acetabular bone defects. Traditional treatment options often fall short, leading to the emergence of custom-made 3D-printed acetabular implants. Accurate assessment of implant positioning is crucial for ensuring optimal postoperative outcomes and for providing feedback to the surgical team. This single-center, retrospective cohort study evaluates the accuracy of standard 2D radiographs versus 3D CT scans in assessing the positioning of these implants, aiming to determine if 2D imaging could serve as a viable alternative for the postoperative evaluation. We analyzed the implant positions of seven rTHA patients with severe acetabular defects (Paprosky ≥ Type IIIA) using an alignment technique that integrates postoperative 2D radiographs with preoperative CT plans. Two independent investigators, one inexperienced and one experienced, measured the positioning accuracy with both imaging modalities. Measurements included translational shifts from the preoperatively templated implant position in the craniocaudal (CC), lateromedial (LM), and ventrodorsal (VD) directions, as well as rotational differences in anteversion (AV) and inclination (INCL). The study demonstrated that 2D radiographs, when aligned with preoperative CT data, could accurately assess implant positions with precision nearly comparable to that of 3D CT scans. Observed deviations were 1.4 mm and 2.7 mm in CC and LM directions, respectively, and 3.6° in AV and 0.7° in INCL using 2D imaging, all within clinically acceptable ranges. For 3D CT assessments, mean interobserver variability was up to 0.9 mm for translational shifts and 1.4° for rotation, while for 2D alignment, observer differences were 1.4 mm and 3.2° for translation and rotation, respectively. Comparative analysis of mean results from both investigators, across all dimensions (CC, LM, AV, and INCL) for 2D and 3D matching, showed no significant differences. In conclusion, conventional anteroposterior 2D radiographs of the pelvis can sufficiently determine the positioning of custom-made acetabular implants in rTHA. This suggests that 2D radiography is a viable alternative to 3D CT scans, potentially enhancing the implementation and quality control of advanced implant technologies.

Sex differences in chest electrical impedance tomography findings

Objective. Electrical impedance tomography (EIT) has been used to determine regional lung ventilation distribution in humans for decades, however, the effect of biological sex on the findings has hardly ever been examined. The aim of our study was to determine if the spatial distribution of ventilation assessed by EIT during quiet breathing was influenced by biological sex. Approach. 219 adults with no known acute or chronic lung disease were examined in sitting position with the EIT electrodes placed around the lower chest (6th intercostal space). EIT data were recorded at 33 images/s during quiet breathing for 60 s. Regional tidal impedance variation was calculated in all EIT image pixels and the spatial distribution of the values was determined using the established EIT measures of centre of ventilation in ventrodorsal (CoVvd) and right-to-left direction (CoVrl), the dorsal and right fraction of ventilation, and ventilation defect score. Main results. After exclusion of one subject due to insufficient electrode contact, 218 data sets were analysed (120 men, 98 women) (age: 53 ± 18 vs 50 ± 16 yr (p = 0.2607), body mass index: 26.4 ± 4.0 vs 26.4 ± 6.6 kg m−2 (p = 0.9158), mean ± SD). Highly significant differences in ventilation distribution were identified between men and women between the right and left chest sides (CoVrl: 47.0 ± 2.9 vs 48.8 ± 3.3% of chest diameter (p < 0.0001), right fraction of ventilation: 0.573 ± 0.067 vs 0.539 ± 0.071 (p = 0.0004)) and less significant in the ventrodorsal direction (CoVvd: 55.6 ± 4.2 vs 54.5 ± 3.6% of chest diameter (p = 0.0364), dorsal fraction of ventilation: 0.650 ± 0.121 vs 0.625 ± 0.104 (p = 0.1155)). Ventilation defect score higher than one was found in 42.5% of men but only in 16.6% of women. Significance. Biological sex needs to be considered when EIT findings acquired in upright subjects in a rather caudal examination plane are interpreted. Sex differences in chest anatomy and thoracoabdominal mechanics may explain the results.

Regional variation of the cortical and trabecular bone material properties in the rabbit skull.

The material properties of some bones are known to vary with anatomical location, orientation and position within the bone (e.g., cortical and trabecular bone). Details of the heterogeneity and anisotropy of bone is an important consideration for biomechanical studies that apply techniques such as finite element analysis, as the outcomes will be influenced by the choice of material properties used. Datasets detailing the regional variation of material properties in the bones of the skull are sparse, leaving many finite element analyses of skulls no choice but to employ homogeneous, isotropic material properties, often using data from a different species to the one under investigation. Due to the growing significance of investigating the cranial biomechanics of the rabbit in basic science and clinical research, this study used nanoindentation to measure the elastic modulus of cortical and trabecular bone throughout the skull. The elastic moduli of cortical bone measured in the mediolateral and ventrodorsal direction were found to decrease posteriorly through the skull, while it was evenly distributed when measured in the anteroposterior direction. Furthermore, statistical tests showed that the variation of elastic moduli between separate regions (anterior, middle and posterior) of the skull were significantly different in cortical bone, but was not in trabecular bone. Elastic moduli measured in different orthotropic planes were also significantly different, with the moduli measured in the mediolateral direction consistently lower than that measured in either the anteroposterior or ventrodorsal direction. These findings demonstrate the significance of regional and directional variation in cortical bone elastic modulus, and therefore material properties in finite element models of the skull, particularly those of the rabbit, should consider the heterogeneous and orthotropic properties of skull bone when possible.

A retrospective study on improving the accuracy of radiotherapy for patients with breast cancer with lymph node metastasis using Styrofoam.

To retrospectively analyze the accuracy of radiotherapy using cone beam computed tomography (CBCT), Styrofoam fixation, and breast bracket fixation in the chest wall target area and supraclavicular lymphatic drainage area (supraclavicular target area) of patients with breast cancer.and compare the setting efficiency and comfort satisfaction. A total of 65 patients with postoperative lymphatic metastasis of breast cancer, including 36 cases of Styrofoam fixation and 29 cases of breast bracket fixation, were recruited from March 2021 to August 2022 and retrospectively analyzed. All the patients underwent CBCT scans weekly, and the setup errors of the chest wall and supraclavicular target volume were compared and recorded. The planning target volume (PTV) margins of the two groups were calculated using the correlation MPTV = 2.5Σ + 0.7σ. The setup time and comfort satisfaction scores of the two groups were recorded and analyzed. The correlations among errors in each direction were analyzed using the Pearson correlation analysis. There was a significant difference in the left-right direction (X) axis of the chest wall target area between the Styrofoam and breast bracket groups (1.59 ± 1.47 mm vs. 2.05 ± 1.64 mm, P = 0.012). There were statistical differences in the ventrodorsal direction (Z) and bed angle of the supraclavicular target area, the data were (1.36 ± 1.27 mm vs. 1.75 ± 1.55 mm, P = 0.046; 0.47 ± 0.47° vs. 0.66 ± 0.59°, P = 0.006, respectively). In the X, Y, and Z directions, the respective PTV margins of the two groups in the chest wall target area were 5.01 mm, 5.99 mm, and 5.47 mm in the Styrofoam group, while those in the breast bracket group were 6.10 mm, 6.34 mm, and 6.10 mm, respectively. Moreover, the PTV margins of the supraclavicular target in the three directions were 3.69 mm, 3.86 mm, and 4.28 mm in the Styrofoam group, while those in the breast bracket group were 3.99 mm, 3.72 mm, and 5.45 mm, respectively. The setup time of the two groups was 3.4 ± 1.1 min and 5.5 ± 3.1 min (P = 0.007). The subjective comfort satisfaction scores of the two groups were 27.50 ± 1.24 and 25.44 ± 1.23 (P < 0.001). The application of Styrofoam fixation in radiotherapy of breast cancer in the supraclavicular lymph node area has several advantages as compared to breast bracket fixation, including higher positioning accuracy, smaller external expansion boundary, improved work efficiency, and patients' comfort, which might provide a reference for clinical work.

Distribution of regional lung function in upright healthy subjects determined by electrical impedance tomography in two chest examination planes.

Objective. The variation in pulmonary gas content induced by ventilation is not uniformly distributed in the lungs. The aim of our study was to characterize the differences in spatial distribution of ventilation in two transverse sections of the chest using electrical impedance tomography (EIT).Approach. Twenty adult never-smokers, 10 women and 10 men (mean age ± SD, 31 ± 9 years), were examined in a sitting position with the EIT electrodes placed consecutively in a caudal (6th intercostal space) and a cranial (4th intercostal space) chest location. EIT data were acquired during quiet breathing, slow and forced full expiration manoeuvres. Impedance variations representing tidal volume (VT), vital capacity (VC), forced expiratory volume in 1 s (FEV1) and forced vital capacity (FVC) were calculated at the level of individual image pixels and their spatial distribution was determined using the following EIT measures: the centres of ventilation in ventrodorsal (CoVvd) and right-to-left direction (CoVrl), the dorsal and right fractions of ventilation, the coefficient of variation (CV) and the global inhomogeneity (GI) index.Main results. The sums of pixel ventilation-related impedance variations reproduced reliably the volumetric dissimilarities amongVT, VC, FEV1and FVC, with no significant differences noted between the two examination planes. Significant differences in ventilation distribution were found between the planes during tidal breathing and slow full expiration, mainly regarding the ventrodorsal direction, with higher values of CoVvdand dorsal fraction of ventilation in the caudal plane (p< 0.01). No significant differences in the spatial distribution of FEV1and FVC were detected between the examination planes.Significance. The spatial distribution of ventilation differed between the two examination planes only during the relaxed (quiet breathing and slow VC manoeuvre) but not during the forced ventilation. This effect is attributable to the differences in thoracoabdominal mechanics between these types of ventilation.

Anatomical Variation in Diaphragm Thickness Assessed with Ultrasound in Healthy Volunteers.

Ultrasonography of the diaphragm in the zone of apposition has become increasingly popular to evaluate muscle thickness and thickening fraction. However, measurements in this anatomical location are frequently hindered by factors that constrain physical accessibility or that alter diaphragm position. Therefore, other anatomical positions at the chest wall for transducer placement are used, but the variability in diaphragm thickness across the dome has not been systematically studied. The aim of this study was to evaluate anatomical variation of diaphragm thickness in 46 healthy volunteers on three ventrodorsal lines and two craniocaudal positions on these three lines. The intraclass correlation coefficient (ICC) for diaphragm thickness in the craniocaudal direction on the mid-axillary line was significantly higher than those on the posterior axillary and midclavicular lines, suggesting it had the lowest variability (ICCmidaxillary=.89, 95% confidence interval [CI]: 0.83-0.93, ICCposterior axillary=0.74, 95% CI: 0.62-0.85, ICCmidclavicular=0.62, 95% CI: 0.43-0.47, p < 0.05). Average diaphragm thickness was comparable on the posterior axillary and midaxillary lines and substantially larger on the midclavicular line (1.24 mm [1.06-1.47], 1.27 mm [1.10-1.42] and 2.32 [1.97-2.70], p < 0.01). We conclude that the normal diaphragm has a large variability in thickness, especially in the ventrodorsal direction. Variability in craniocaudal position is the lowest at the midaxillary line, which therefore appears to be the preferred site for diaphragm thickness measurement.

Von Economo neurons: Cellular specialization of human limbic cortices?

Von Economo neurons (VENs) have been mentioned in the medical literature since the second half of the 19th century; however, it was not until the second decade of the 20th century that their cytomorphology was described in detail. To date, VENs have been found in limbic sectors of the frontal, temporal and insular lobes. In humans, their density seems to decrease in the caudo-rostral and ventro-dorsal direction; that is, from the anterior regions of the cingulate and insular cortices towards the frontal pole and the superior frontal gyrus. Several studies have provided similar descriptions of the shape of the VEN soma, but the size of the soma varies from one cortical region to another. There is consensus among different authors about the selective vulnerability of VENs in certain pathologies, in which a deterioration of the capacities involved in social behaviour is observed. In this review, we propose that the restriction of VENs towards the sectors linked to limbic information processing in Homo sapiens gives them a possible functional role in relation to the structures in which they are located. However, given the divergence in characteristics such as location, density, size and biochemical profile among VENs of different cortical sectors, the activities in which they participate could allow them to partake in a wide spectrum of neurological functions, including autonomic responses and executive functions.

Impact of Cold Weather on Setup Errors in Radiotherapy

Objective To investigate the influence of cold weather on setup errors of patients with chest and pelvic disease in radiotherapy. Methods The image-guided data of the patients were collected from the Radiotherapy Center of Cancer Hospital Affiliated to Guangxi Medical University from October 2020 to February 2021. During this period, the cold weather days were December 15, 16, and 17, 2020, and January 7 and 8, 2021. For body fixation in radiotherapy, an integrated plate and a thermoplastic mold were employed in 18 patients with chest disease, while an integrated plate and a vacuum pad were applied in 19 patients with pelvic disease. All patients underwent cone beam computed tomography (CBCT) scans in the first five treatments and once a week thereafter. The obtained data were registered to the planning CT image to get the setup errors of the patient in the translational direction including X, Y, and Z axes and rotational direction including RX, RY, and RZ. Then, the Mann–Whitney U test was performed. The expansion boundary values of the chest and pelvis were calculated according to the formula MPTV=2.5∑+0.7δ. Results A total of 286 eligible results of CBCT scans were collected. There were 138 chest CBCT scans, including 26 taken in cold weather and 112 in usual weather, and 148 pelvic CBCT scans, including 33 taken in cold weather and 115 in usual weather. The X-, Y-, and Z-axis translational setup errors of patients with chest disease in the cold weather group were 0.16 (0.06, 0.32) cm, 0.25 (0.17, 0.52) cm, and 0.35 (0.21, 0.47) cm, respectively, and those in the usual weather group were 0.14 (0.08, 0.29) cm, 0.23 (0.13, 0.37) cm, and 0.18 (0.1, 0.35) cm, respectively. The results indicated that there was a statistical difference in the Z-axis translational error between the cold weather group and the usual weather group (U = 935.5; p=0.005 < 0.05), while there was no statistical difference in the rotational error between the two groups. The external boundary values of X, Y, and Z axes in the cold weather group were 0.57 cm, 0.92 cm, and 0.99 cm, respectively, and those in the usual weather group were 0.57 cm, 0.78 cm, and 0.68 cm, respectively. There was no significant difference in the translational and rotational errors of patients with pelvic disease between the cold weather group and the usual weather group (p < 0.05). The external boundary values of X, Y, and Z axes were 0.63 cm, 0.79 cm, and 0.68 cm in the cold weather group and 0.61 cm, 0.79 cm, and 0.61 cm in the usual weather group, respectively. Conclusion The setup error of patients undergoing radiotherapy with their bodies fixed by an integrated plate and a thermoplastic mold was greater in cold weather than in usual weather, especially in the ventrodorsal direction.

Frame-based and robot-assisted insular stereo-electroencephalography via an anterior or posterior oblique approach.

There is an increasing interest in stereo-electroencephalography (SEEG) for invasive evaluation of insular epilepsy. The implantation of insular SEEG electrodes, however, is still challenging due to the anatomical location and complex functional segmentation in both an anteroposterior and ventrodorsal (i.e., superoinferior) direction. While the orthogonal approach (OA) is the shortest trajectory to the insula, it might insufficiently cover these networks. In contrast, the anterior approach (AOA) or posterior oblique approach (POA) has the potential for full insular coverage, with fewer electrodes bearing a risk of being more inaccurate due to the longer trajectory. Here, the authors evaluated the implantation accuracy and the detection of epilepsy-related SEEG activity with AOA and POA insular trajectories. This retrospective study evaluated the accuracy of 220 SEEG electrodes in 27 patients. Twelve patients underwent a stereotactic frame-based procedure (frame group), and 15 patients underwent a frameless robot-assisted surgery (robot group). In total, 55 insular electrodes were implanted using the AOA or POA considering the insular anteroposterior and ventrodorsal functional organization. The entry point error (EPE) and target point error (TPE) were related to the implantation technique (frame vs robot), the length of the trajectory, and the location of the target (insular vs noninsular). Finally, the spatial distribution of epilepsy-related SEEG activity within the insula is described. There were no significant differences in EPE (mean 0.9 ± 0.6 for the nonsinsular electrodes and 1.1 ± 0.7 mm for the insular electrodes) and TPE (1.5 ± 0.8 and 1.6 ± 0.9 mm, respectively), although the length of trajectories differed significantly (34.1 ± 10.9 and 70.1 ± 9.0 mm, repsectively). There was a significantly larger EPE in the frame group than in the robot group (1.5 ± 0.6 vs 0.7 ± 0.5 mm). However, there was no group difference in the TPE (1.5 ± 0.8 vs 1.6 ± 0.8 mm). Epilepsy-related SEEG activity was detected in 42% (23/55) of the insular electrodes. Spatial distribution of this activity showed a clustering in both anteroposterior and ventrodorsal directions. In purely insular onset cases, subsequent insular lesionectomy resulted in a good seizure outcome. The implantation of insular electrodes via the AOA or POA is safe and efficient for SEEG implantation covering both anteroposterior and ventrodorsal functional organization with few electrodes. In this series, there was no decrease in accuracy due to the longer trajectory of insular SEEG electrodes in comparison with noninsular SEEG electrodes. The results of frame-based and robot-assisted implantations were comparable.

A description of an ultrasound-guided technique for a quadratus lumborum block in the cat: a cadaver study

ObjectivesTo describe the ultrasonographic (US) anatomy of the sublumbar region at the level of second lumbar vertebra (L2), to assess the feasibility of US-guided quadratus lumborum (QL) injections and to evaluate the dye distribution pattern in feline cadavers. Study designDescriptive feline cadaver study. AnimalsA total of eight cat cadavers. MethodsUsing a linear probe (6–14 MHz), with the cadavers in lateral recumbency, the QL and psoas muscles (Pm) were identified at the level of L2 and landmarks recorded. Using an in-plane technique, a spinal needle was inserted in a ventrodorsal direction to reach the interfascial plane between the QL and Pm. Using a ropivacaine, dye and iohexol solution, a total volume of 0.4 mL kg–1 was injected. Computed tomography (CT) scanning and anatomic dissection were performed to evaluate the spread of injectate. Presence of dye on the sympathetic trunk was compared between assessment methods using kappa coefficient of agreement (κ). ResultsUsing US guidance, the QL-Pm interfascial plane was identified and dye solution was present in the target fascial plane in all animals. Injectate was distributed on the ventral roots of the spinal nerves between the first and third lumbar vertebrae in 6/8 cats, and on the sympathetic trunk from the thirteenth thoracic to the third lumbar vertebrae in 7/8. Dye was found on the major splanchnic nerve in 7/8 cats and on the minor splanchnic nerve and coeliac ganglion pathways in all animals. Agreement between dissection and CT images dye distribution on the sympathetic trunk was κ = 0.72. Conclusions and clinical relevanceThe US-guided QL injection was feasible and injectate was present in the QL-Pm interfascial plane in all feline cadavers. In vivo studies are warranted to evaluate the analgesic efficacy of this technique for abdominal surgical procedures.

Does Atrial Electrical Stimulation Influence the Sequence of Ventricular Depolarization in the Heart of a Rainbow Trout Oncorhynchus mykiss?

Depolarization of the heart ventricles at an increasing heart rate was investigated in a rainbow trout Oncorhynchus mykiss (n = 14). It was shown that at an imposed supraventricular rhythm ranging from 30 to 60 bpm the depolarization wave initially propagates from the loci of earliest atrial excitation located near the atrioventricular orifice to the subendocardial trabecular layer of the noncompact myocardium and then travels towards the epicardium as well as along the wall. This indicates some preferential pathways of cardiac excitation conduction from the pacemaker zone to subendocardial myocytes. Regardless of the heart rate, the basic pattern of ventricular excitation in the rainbow trout heart consists in the propagation of the depolarization wave, which captures the entire thickness of the myocardial wall and activates the subendocardium faster than the subepicardium, from the dorsal regions of the cardiac base in basoapical and ventral directions. At a rhythm of 50–60 bpm, propagation of the depolarization wave in the basal ventricular areas is inverted from the dorsoventral to ventrodorsal direction.

Basic evaluation of a novel 4D target and human body phantom

Stereotactic body radiation therapy (SBRT) is usually verified with a dynamic phantom or solid phantom, but there is a demand for phantoms that can accurately simulate tumor dynamics within an individual that would allow customized validation in every patient. We developed a new 4D dynamic target phantom (multi-cell 4D phantom) that allows simulation of tumor movement in patients. The basic quality and dynamic reproducibility of this new phantom was verified in this investigation. The newly developed multi-cell 4D phantom comprises four main components: soft tissue, bones, lungs, and tumor (target). The phantom structure was based on computed tomography (CT) data of a male. In this study, we investigated the basic performance of a multi-cell 4D phantom. All the CT numbers of the phantom were very close to those of human data. The geometric maximum amplitudes were 4.57 mm in the lateral direction, 4.59 mm in the ventrodorsal direction, and 3.68 mm in the cranio-caudal direction. Geometric errors were 0.84, 0.58, and 0.40 mm, respectively. Movements of the abdominal surface were stable for 60 s. Repeated measurements show no actual differences in target movements between multiple measurements and indicated high reproducibility (r > 0.97). End-to-end tests using Gafchromic film revealed a gamma pass rate of 98% or above (2 mm/3%). Although our phantom performed limited reproducibility in the movement of the patient tumor at present, a satisfactory level of precision was confirmed in general. This is a very promising device for use in the verification of radiation therapy for moving targets.

Influence of adequate pelvic floor muscle contraction on the movement of the coccyx during pelvic floor muscle training.

[Purpose] Pelvic floor muscle training is a first-line therapy for female stress urinary incontinence. Previous studies have suggested that the coccyx tip moves ventrally and cranially during pelvic floor muscle contraction. The study aimed to elucidate the influence of adequate pelvic floor muscle contraction on coccyx movement. [Subjects and Methods] Sixty-three females (57 patients with stress urinary incontinence and additional 6 healthy volunteers) were enrolled. Using magnetic resonance imaging, coccyx movement was evaluated during pelvic floor muscle contraction and strain. An adequate contraction was defined as a contraction with good Oxford grading scale [≥3] and without inadequate muscle substitution patterns. [Results] Inadequate muscle substitution patterns were observed in 33 participants (52.4%). No significant difference was observed in the movement of the coccyx tip in the ventrodorsal direction between females with and without inadequate muscle substitution patterns. However, a significant increase in the movement of the coccyx tip in the cranial direction was detected in the group without inadequate muscle substitution patterns. Compared to participants with inadequate pelvic floor muscle contraction, those who had adequate pelvic floor muscle contraction exhibited significantly increased cranial movement of the coccyx. [Conclusion] Adequate pelvic floor muscle contraction can produce cranial movement of the coccyx tip.

Motion of gastroesophageal junction adenocarcinoma during preoperative radiotherapy

Objective To evaluate the range of motion of gastroesophageal junction (GEJ) adenocarcinoma during preoperative radiotherapy. Methods Fourteen consecutive patients who received preoperative chemoradiotherapy for GEJ adenocarcinoma were included in this study. Fiducial markers were placed on the upper and lower edges of and around the primary tumor under a gastroscope. Eight patients underwent four-dimensional computed tomography to obtain 98 intrafractional images containing 8 fiducial markers at the GEJ. Twelve patients underwent cone-beam computed tomography at the 1 st to 5th, 7th, 12th, 17th, and 22nd courses of radiotherapy to obtain 90 interfractional images. The paired t test was used for difference analysis. Results The intrafractional tumor displacements in left-right (LR), ventro-dorsal (VD), and cranio-caudal (CC) directions were 0.92±0.95 mm, 2.27±2.73 mm, and 9.95±5.48 mm, respectively; the motion in CC direction was larger than that in LR or VD direction (P=0.000 or P=0.000); the motion in VD direction was larger than that in LR direction (P=0.000). The interfractional tumor displacements in LR, VD, and CC were 6.56±4.19 mm, 5.69±3.29 mm, and 6.49±4.37 mm, respectively; the motion in LR or CC direction was larger than that in VD direction (P=0.031 or P=0.044); there was no significant difference between the motions in LR and CC directions (P=0.956). In order to ensure 95% of prescribed dose to at least 90% of the tumor volume, the margins from GEJ lesion in LR, VD, and CC directions were 19.4 mm, 14.6 mm, and 27.2 mm, respectively, which could cover both intrafractional and interfractional tumor displacements during preoperative radiotherapy. Conclusions GEJ tumor has a wide range of movement in preoperative intra-and inter-fractional radiotherapy. This should be considered for precise radiotherapy, and a new method should be selected to limit tumor movement. Key words: Gastroesophageal junction tumor; Preoperative radiotherapy; Displacement

A structural numerical model for the optimization of double pelvic osteotomy in the early treatment of canine hip dysplasia.

Double pelvic osteotomy (DPO) planning is usually performed by hip palpation, and on radiographic images which give a poor representation of the complex three-dimensional manoeuvre required during surgery. Furthermore, bone strains which play a crucial role cannot be foreseen. To support surgeons and designers with biomechanical guidelines through a virtual model that would provide bone stress and strain, required moments, and three-dimensional measurements. A multibody numerical model for kinematic analyses has been coupled to a finite element model for stress/strain analysis on deformable bodies. The model was parametrized by the fixation plate angle, the iliac osteotomy angle, and the plate offset in ventro-dorsal direction. Model outputs were: acetabular ventro-version (VV) and lateralization (L), Norberg (NA) and dorsal acetabular rim (DAR) angles, the percentage of acetabular coverage (PC), the peak bone stress, and moments required to deform the pelvis. Over 150 combinations of cited parameters and their respective outcome were analysed. Curves reporting NA and PC versus VV were traced for the given patient. The optimal VV range in relation to NA and PC limits was established. The 25° DPO plate results were the most similar to 20° TPO. The output L grew for positive iliac osteotomy inclinations. The 15° DPO plate was critical in relation to DAR, while very large VV could lead to bone failure. Structural models can be a support to the study and optimization of DPO as they allow for foreseeing geometrical and structural outcomes of surgical choices.

Effects of mechanical stretching of embryonic tissues on axial structure formation in Xenopus laevis

Effect of mechanical stretch on the differentiation of axial anlages and Chordin gene expression was studied in sandwich explants prepared from embryonic tissues of Xenopus laevis at the early gastrula stage in two variants: with dissected or intact dorso-medial region. In the first case, convergent cell movements were suppressed and properly organized axial organs (notochord and somites) were almost completely absent. However, they developed if the explants of such type were artificially stretched in the ventro-dorsal direction. In this case, axial organs elongated in the line of stretching, that is in the direction vertical to their normal orientation. Segmented mesoderm was always in contact with the chord anlage. In situ hybridization revealed that the area of Chordin gene expression was also extended in the direction of stretching. PCR showed that Chordin gene expression in stretched explants with disrupted dorso-medial region was statistically at the same level as in the explants with intact dorso-medial region. At the same time, the corresponding gene expression in unstretched explants with disrupted dorso-medial region was statistically higher. The obtained data indicate that mechanical stretch and associated cell movements are a necessary and sufficient condition for the formation of proper histological structure of axial organs and regulation of Chordin gene expression.

Inferior vermian hypoplasia – preconception, misconception

Inferior vermian hypoplasia – preconception, misconception

Migrating sewing needle in the cervical vertebral canal in a dog

An eight-month-old female labrador retriever was evaluated for progressive cervical hyperaesthesia after being seen coughing, close to a broken sewing kit two weeks prior to presentation. Physical examination showed cervical...

Feasibility and safety of intracorporeal esophagojejunostomy after laparoscopic total gastrectomy: Inverted T-shaped anastomosis using linear staplers

Although laparoscopic distal gastrectomy has been widely accepted in clinical practice, laparoscopic total gastrectomy (LTG) is not yet familiar because of the difficulty in esophagojejunostomy. The purpose of this study was to evaluate perioperative and short-term outcomes of our procedure of intracorporeal gastrojejunostomy using linear staplers after LTG. Of 98 consecutive patients who underwent LTG for gastric cancer in our department between August 2002 and December 2010, 94 patients underwent esophagojejunostomy with a linear stapling device. After October 2007, we modified the esophagojejunostomy; ie, the most recent 57 patients underwent transection of the esophagus in the ventrodorsal direction and insertion of a linear stapler from the anterior wall of the Roux limb to the posterior wall so as to make an inverted T-shaped anastomosis. We evaluated the results in these 57 patients (recent group) and compared them with the results in the earlier 37 patients (early group). The mean operative time in the recent group was 368 to 94.6 min, and the mean estimated blood loss was 57 to 33 g; both were comparable with those in the early group. Neither open conversion nor intraoperative complications were encountered. Two patients experienced anastomotic leakage in the earlier group, but anastomotic leakage did not occur in the recent group. No mortality was encountered. We herein report our procedure of intracorporeal gastrojejunostomy using linear staplers after LTG. Our procedure of esophagojejunostomy using linear staplers is safe and feasible and has acceptable morbidity.

Measurement of Orbital Volume after Enucleation and Orbital Implantation

IntroductionThis article reports experience relating to the measurement of orbital volume by means of cone beam computed tomography (CBCT) and Cranioviewer program software in patients who have undergone enucleation and orbital implantation.Patients and MethodsCBCT scans were made in 30 cases, 10 of which were later excluded because of various technical problems. The study group therefore consisted of 20 patients (8 men and 12 women). The longest follow-up time was 7 years, and the shortest was 1 year. In all 20 cases, the orbital volume was measured with Cranioviewer orbital program software. Slices were made in the ventrodorsal direction at 4.8 mm intervals in the frontal plane, in both bony orbits (both that containing the orbital implant and the healthy one). Similar measurements were made in 20 patients with various dental problems. CBCT scans were recorded for the facial region of the skull, containing the orbital region. The Cranioviewer program can colour the area of the slices red, and it automatically measures the area in mm.ResultsIn 5 of the 20 cases, the first 4 or all 5 slices revealed that the volume of the operated orbit was significantly smaller than that of the healthy orbit, in 12 cases only from 1 to 3 of the slices indicated such a significant difference, and in 3 cases no differences were observed between the orbits. In the control group of patients with various dental problems, there was no significant difference between the two healthy orbits. The accuracy of the volume measurements was assessed statistically by means of the paired samples t-test.SummaryTo date, no appropriate method is avaliable for exact measurement of the bony orbital volume, which would be of particular importance in orbital injury reconstruction. However, the use of CBCT scans and Cranioviewer orbital program software appears to offer a reliable method for the measurement of changes in orbital volume.