Migration Velocity Research Articles

Lifecycle of an Isolated Seismic Swarm in Continental Southern Norway from Nucleation, Acceleration, and Yielding to the Demise of Fault Slip

Abstract An intraplate earthquake swarm started near the Bitdal valley in the seismically inactive mountains of Southern Norway in summer 2020 and continued for more than two years. We detected 1600 earthquakes through template matching and obtained high-resolution relative magnitudes and locations for the events to resolve the swarm’s spatiotemporal evolution and tectonic implications. The detection results reveal that no earthquakes occurred at the swarm site for at least 22 yr prior to the current activity. In July 2020, six months before the swarm’s initially recognized onset, weak precursory events appeared. Hypocenter relocation shows that the swarm develops along a single 1.5 km patch on a northwest–southeast-striking fault with oblique-normal sense containing a left-lateral component. The seismicity follows a dual-velocity migration for which the slow, general migration reverses sense twice, and 30 short bursts show internal migration both with and against the general migration direction. Changes in the distribution of events let us divide the swarm into four phases: precursory activity, accelerating growth, main slip, and slow decline. The observed seismicity bursts, pauses, and dual migration velocities are consistent with a rupture-driven mechanism for which slip initiates spontaneously and keeps going in slow and quick failure cascades due to stress transfer and slip weakening.

QSOX1 Modulates Glioblastoma Cell Proliferation and Migration In Vitro and Invasion In Vivo

Background: Quiescin Sulfhydryl Oxidase 1 (QSOX1) is an enzyme that catalyzes the oxidation of free thiols to generate disulfide bonds in a variety of proteins, including the cell surface and extracellular matrix. QSOX1 has been reported to be upregulated in a number of cancers, and the overexpression of QSOX1 has been correlated with aggressive cancers and poor patient prognosis. Glioblastoma (GBM) brain cancer has been practically impossible to treat effectively, with cells that rapidly invade normal brain tissue and escape surgery and other treatment. Thus, there is a crucial need to understand the multiple mechanisms that facilitate GBM cell invasion and to determine if QSOX1 is involved. Methods and Results: Here, we investigated the function of QSOX1 in human glioblastoma cells using two cell lines derived from T98G cells, whose proliferation, motility, and invasiveness has been shown by us to be dependent on disulfide bond-containing adhesion and receptor proteins, such as L1CAM and the FGFR. We lentivirally introduced shRNA to attenuate the QSOX1 protein expression in one cell line, and a Western blot analysis confirmed the decreased QSOX1 expression. A DNA content/cell cycle analysis using flow cytometry revealed 27% fewer knockdown cells in the S-phase of the cell cycle, indicating a reduced proliferation. A cell motility analysis utilizing our highly quantitative SuperScratch time-lapse microscopy assay revealed that knockdown cells migrated more slowly, with a 45% decrease in migration velocity. Motility was partly rescued by the co-culture of knockdown cells with control cells, indicating a paracrine effect. Surprisingly, knockdown cells exhibited increased motility when assayed using a Transwell migration assay. Our novel chick embryo orthotopic xenograft model was used to assess the in vivo invasiveness of knockdown vs. control cells, and tumors developed from both cell types. However, fewer invasive knockdown cells were observed after about a week. Conclusions: Our results indicate that an experimental reduction in QSOX1 expression in GBM cells leads to decreased cell proliferation, altered in vitro migration, and decreased in vivo invasion.

Parallel dynamics of slow slips and fluid-induced seismic swarms

Earthquake swarms may be driven by fluids, through hydraulic injections or natural fluid circulation, but also by slow and aseismic slip transients. Understanding the driving factors for these prolific sequences and how they can potentially develop into larger ruptures remains a challenge. A notable and almost ubiquitous feature of swarms is their hypocenters migration, which occurrence is closely related to the processes driving the observed seismicity, in a similar way as seismicity accompanies slow-slip events at subduction zones. Here, we analyze global data on migrating sequences, and identify scaling laws for migration velocity, moment and duration measured on natural and injection-induced swarms, foreshock sequences, and slow slip events. We highlight two different behaviors among these sequences: one linked to slow slips, with elevated migration velocities and moments, and the other related to fluid-induced processes, featuring lower velocities and moments. These results provide metrics for distinguishing between the drivers of earthquake swarms, fluid or slow-slip related, and prompt a reevaluation of scaling laws of fault slip transients, especially for swarms.

Apelin Counteracts the Effects of Fusobacterium nucleatum on the Migration of Periodontal Ligament Cells In Vitro

To better understand the link between periodontitis and metabolic diseases, our in vitro study aimed to assess the influence of the adipokine apelin and/or the periodontal pathogen Fusobacterium nucleatum on periodontal cells. Periodontal ligament (PDL) cells were exposed to F. nucleatum in the presence and absence of apelin. Scratch assays were used to analyze the in vitro wound healing and velocity of cell migration. To investigate if F. nucleatum and/or apelin have a regulatory effect on cell proliferation and apoptosis, proliferation and viability assays were performed as well as an analysis of caspase 9 expression. Both the in vitro wound closure and the cell migration rate were significantly reduced by F. nucleatum. Simultaneous incubation with apelin counteracted the adverse effects of F. nucleatum. The proliferation assay demonstrated that neither apelin nor F. nucleatum significantly affected PDL cell proliferation. Furthermore, neither apelin nor F. nucleatum was cytotoxic or affected apoptosis after 48 h. Apelin could play a modulatory role in the pathogenesis of periodontitis, as it was able to compensate for the inhibitory effects of the periodontal pathogen F. nucleatum on PDL cell migration in vitro.

EZB-type diffuse large B-cell lymphoma cell lines have superior migration capabilities compared to MCD-type.

Diffuse large B-cell lymphoma (DLBCL) represents the most prevalent aggressive B-cell lymphoma. The group is heterogeneous and the outcome is variable. A variety of approaches have been employed with the objective of improving the stratification of DLBCL patients according to their prognosis, based on the cell of origin. Recently, distinct genetic subtypes of DLBCL have been identified. Given the importance of cell migration in immune cells, the objective of this study was to ascertain whether different genetic subtypes of DLBCL exhibit disparate migration abilities. MCD- and EZB-type DLBCL cell lines were subjected to testing to ascertain their basal velocity in straight microchannels and their ability to overcome tight constrictions of 2 μm. The EZB-type cell lines showed superior basal migration velocity and constriction passage time, and a similar trend was observed in live cell imaging of native human DLBCL tissue. In addition, MCD-type DLBCL exhibited significantly elevated levels of nuclear lamin A/C, which is responsible for the stiffness of the nuclear envelope and could thus explain the disparate migration behaviours observed among these subtypes. Our study suggests that different genetic subtypes of DLBCL may not only influence the outcome after therapy but also the motility of the tumour cells.

Aggregation of adult parasitic nematodes in sex-mixed groups analysed by transient anomalous diffusion formalism.

Intestinal parasitic worms are widespread throughout the world, causing chronic infections in humans and animals. However, very little is known about the locomotion of the worms in the host gut. We studied the movement of Heligmosomoides bakeri, naturally infecting mice, and used as an animal model for roundworm infections. We investigated the locomotion of H. bakeri in simplified environments mimicking key physical features of the intestinal lumen, i.e. medium viscosity and intestinal villi topology. We found that the motion sequence of these nematodes is non-periodic, but the migration could be described by transient anomalous diffusion. Aggregation as a result of biased, enhanced-diffusive locomotion of nematodes in sex-mixed groups was detected. This locomotion is probably stimulated by mating and reproduction, while single nematodes move randomly (diffusive). Natural physical obstacles such as high mucus-like viscosity or villi topology slowed down but did not entirely prevent nematode aggregation. Additionally, the mean displacement rate of nematodes in sex-mixed groups of 3.0 × 10-3 mm s-1 in a mucus-like medium is in good agreement with estimates of migration velocities of 10-4 to 10-3 mm s-1 in the gut. Our data indicate H. bakeri motion to be non-periodic and their migration random (diffusive-like), but triggerable by the presence of kin.

Influence of concentration on thermophoresis of spherical aerosol particles within a Brinkman medium

Abstract We are examining the thermophoretic movement of a uniform mixture of spherical aerosol particles, all with the same properties, as they are situated within a porous material. These particles can have various thermal conductivity and surface characteristics. This analysis focuses on situations where the Péclet and Reynolds numbers are small. The influence of particle interactions is carefully considered by using a unit cell model, a well-established method known for its accurate predictions in the context of sedimentation for monodisperse suspensions of spherical particles. The porous medium is represented as a Brinkman fluid characterized by a Darcy permeability, which can be determined directly from experimental observations. This medium is considered to be uniform and isotropic, and the solid matrix is in thermal equilibrium with the fluid flowing through the voids of the medium. The Knudsen number is assumed to be low, enabling the description of fluid flow through the porous medium using a continuum model that includes temperature jump, thermal creep, frictional slip, and thermal stress slip at the aerosol particle’s surface. The conservation equations for energy and momentum are individually tackled within each cell. In this model, each cell represents a spherical particle enclosed by a concentric shell of surrounding fluid. The thermophoretic particle migration velocity is determined across different cases. We derive analytical expressions for this average particle velocity, expressing it in terms of the particle volume fraction. It is observed that different cell models yield somewhat varied results for particle velocity. Generally, with a fixed permeability parameter characterizing the porous medium, an increase in the thermal stress slip coefficient tends to decrease the normalized thermophoretic velocity across the different cell models. The results are in good agreement with the available data as documented in the existing literature. Additionally, a parallel examination of aerosol sphere sedimentation is provided.

Passive Source Reverse Time Migration Based on the Spectral Element Method

AbstractIncreasing deployment of dense arrays has facilitated detailed structure imaging for tectonic investigation, hazard assessment and resource exploration. Strong velocity heterogeneity and topographic changes have to be considered during passive source imaging. However, it is quite challenging for ray‐based methods, such as Kirchhoff migration or the widely used teleseismic receiver function, to handle these problems. In this study, we propose a 3‐D passive source reverse time migration strategy based on the spectral element method. It is realized by decomposing the time reversal full elastic wavefield into amplitude‐preserved vector P and S wavefields by solving the corresponding weak‐form solutions, followed by a dot‐product imaging condition to get images for the subsurface structures. It enables us to use regional 3‐D migration velocity models and take topographic variations into account, helping us to locate reflectors at more accurate positions than traditional 1‐D model‐based methods, like teleseismic receiver functions. Two synthetic tests are used to demonstrate the advantages of the proposed method to handle topographic variations and complex velocity heterogeneities. Furthermore, applications to the Laramie array data using both teleseismic P and S waves enable us to identify several south‐dipping structures beneath the Laramie basin in southeast Wyoming, which are interpreted as the Cheyenne Belt suture zone and agree with, and improve upon previous geological interpretations.

Morphodynamics of melting ice over turbulent warm water streams

We investigate the morphodynamics of an ice layer over a turbulent stream of warm water using numerical simulations. At low water speeds, characteristic streamwise undulations appear, which can be explained by the Reynolds analogy between heat and momentum transfer. As the water speed increases, these undulations combine with spanwise ripples of a much greater length scale. These ripples are generated by a melting mechanism controlled by the instability originating from the ice–water interactions, and, through a melting/freezing process, they evolve downstream with a migration velocity much slower than the turbulence characteristic velocity.

K2P2.1 channels modulate the pH- and mechanosensitivity of pancreatic stellate cells.

Pancreatic stellate cells (PSCs) are central in the development of acute pancreatitis and tumor fibrosis in pancreatic ductal adenocarcinoma (PDAC). Fibrosis and a unique pH landscape represent characteristic properties of the PDAC microenvironment. Mechanosensitive ion channels are involved in the activation of PSCs. Among these channels, K2P2.1 has not yet been studied in PSCs. K2P2.1 channels are pH- and mechanosensitive. We confirmed K2P2.1 expression in PSCs by RT-qPCR and immunofluorescence. PSCs from K2P2.1+/+ and K2P2.1-/- mice were studied under conditions mimicking properties of the PDAC microenvironment (acidic extracellular pH (pHe), ambient pressure elevated by + 100mmHg). Migration and the cell area were taken as surrogates for PSC activation and evaluated with live cell imaging. pHe-dependent changes of the membrane potential of PSCs were investigated with DiBAC4(3), a voltage-sensitive fluorescent dye. We observed a correlation between morphological activation and progressive hyperpolarization of the cells in response to changes in pHe and pressure. The effect was in part dependent on the expression of K2P2.1 channels because the membrane potential of K2P2.1+/+ PSCs was always more hyperpolarized than that of K2P2.1-/- PSCs. Cell migration velocity of K2P2.1+/+ cells decreased upon pressure application when cells were kept in an acidic medium (pHe 6.6). This was not the case in K2P2.1-/- PSCs. Taken together, our study highlights the critical role of K2P2.1 channels in the combined sensing of environmental pressure and pHe by PSCs and in coordinating cellular morphology with membrane potential dynamics. Thus, K2P2.1 channels are important mechano-sensors in murine PSCs.

Wave-plus-current induced span shoulder migration in three dimensional scour around submarine pipeline

The purpose of this study is to investigate the rate of span shoulder propagation under conditions of waves and current. The study analyzed 117 cases from previous and present investigations, which were divided into three categories: pure wave, wave-plus-current, and pure current. Furthering the framework of Sui et al. (2021) for pure current conditions, the relative current strength was included in the present study to incorporate the effects of the wave component in a general wave-plus-current condition, through a systematic dimensional analysis. For a given excess Shields parameter, the pure current case has the largest migration velocity compared to the wave conditions. Incorporating the wave components into the pure current decreases the rate of the span shoulder propagation. A new model is proposed to predict the rate of span shoulder propagation while considering the dependency of current strength, excess Shields parameter, and embedded depth. The new model has a determination coefficient of 0.8, indicating its ability to accurately predict the rate of the span shoulder propagation under general wave and current conditions. Parametric studies show that increasing the excess Shields parameter increases the migration rate while increasing the embedment depth, ratio of the pipe diameter to the grain diameter decreases it.

Aerodynamic Size-Dependent Collection and Inactivation of Virus-Laden Aerosol Particles in an Electrostatic Precipitator.

Electrostatic precipitators (ESPs) may enable high particle collection efficiency with minimal pressure drop in HVAC systems. However, studies of pathogen collection and inactivation in ESPs at medium to higher flow rates are limited. Here, a single-stage, wire-plate ESP operated at flow rates of 51 and 85 m3 h-1 was used to study the removal of virus-laden aerosol particles for three different airborne viruses: (1) bovine coronavirus (BCoV), (2) influenza A virus (IAV), and (3) porcine reproductive and respiratory virus (PRRSV). Size-resolved measurements of collection efficiency were obtained using Andersen cascade impactors (ACI) sampling upstream and downstream of the ESP. All measurements were analyzed based on three distinctive but complementary methods: (1) fluorimetry to assess physical collection, (2) RT-qPCR to assess viral RNA concentrations and (3) virus titration to assess virus viability. In general, log reductions by virus titration were highest followed by those from RT-qPCR, and last fluorimetry, suggesting that a portion of virus may be potentially inactivated in flight in the ESP. An effective migration (deposition) velocity ranging from 3.10 to 10.05 cm s-1 was also determined using the spatially resolved measurements of virus collection on the ESP plates.

Getting the Best out of Capillary Electrophoresis and Capillary Electrophoresis-Mass Spectrometry by Quantifying Sources of Peak Broadening for Proteins Using Polyelectrolyte Multilayer Coated Fused Silica Capillaries.

Capillary electrophoresis (CE) has emerged as a relevant technique for protein and biopharmaceutical analysis, as it combines high separation efficiency, sensitivity, and versatility. The use of capillary coatings, including successive multiple ionic-polymer layers (SMILs), reduces interactions between analytes and the capillary, further improving the CE performance. Nevertheless, separations done on SMIL coatings rarely surpass 500 × 103 plates/m. To obtain the best out of the CE, it is interesting to have a detailed look at the sources of peak dispersion. Separations of a mix of model proteins were performed on (poly(diallyldimethylammonium chloride)/poly(styrenesulfonate))2.5-coated capillaries at different electrical field strengths, leading to plate height H against migration velocity u plots that enabled a quantitative analysis of each contribution. Using this model, capillary lengths and injected volumes were systematically varied. For the first time, the contribution of sample electrophoretic heterogeneity to the total peak dispersion was deciphered for model proteins and a monoclonal antibody. Dispersion due to electromigration was seen to have an impact on plate heights in the case of triangular peaks of small molecules but not for proteins under the present conditions. UV and mass spectrometry detections were compared on the same capillary, providing valuable information on the impact of the detection type on separation efficiency. Close to 1 million plates/m were reached in the best conditions.

Revealing the Effect of Dynamic Structural Evolution on Triple Junction Deformation Mechanism: Molecular Dynamics Simulations and an Energetic Model

Abstract Triple junction (TJ) migration is a plastic deformation mechanism in polycrystalline metals mediated by the interplay between neighboring grain boundaries (GBs). Compared with GB migration, the dynamic change of TJ structure during migration and its impact on subsequent TJ behavior is often overlooked. In this study, we explore the effect of dynamic TJ structure evolution on TJ deformation mechanism in a face-centered cubic metal Au model using molecular dynamics simulations. Our analysis reveals that the dislocation accumulation at TJ due to inconsistent disconnection nucleation from neighboring GBs can influence the stick-slip behavior of TJ migration. With the dynamic change of TJ structure, the velocity of TJ migration is gradually reduced, leading to a transition from TJ migration to dislocation emission from TJ. We have developed an energetic model to evaluate the critical stresses required for TJ migration and dislocation emission, providing an explanation of the competition between TJ migration and dislocation emission. Our findings deepen the understanding of TJ-governed plastic deformation mechanisms in polycrystalline materials.

Compensating Acquisition Footprint for Amplitude-Preserving Angle Domain Common Image Gathers Based on 3D Reverse Time Migration

Angle domain common image gathers (ADCIGs) play a crucial role in seismic exploration, offering prestack underground illumination information that aids in validating migration velocity and conducting prestack amplitude versus angle (AVA) analysis for reservoir characterization. This paper introduces an innovative approach for compensating amplitude errors caused by irregular seismic acquisition geometries in ADCIGs. By incorporating an angle domain illumination compensation factor, the proposed method effectively modifies these errors, preserving the amplitude of seismic reflectivity in the prestack angle domain. The effectiveness of the proposed approach is validated through comprehensive tests conducted on synthetic and field data examples. The results demonstrate the capability of the method to enhance the quality of ADCIGs derived from 3D reverse time migration (RTM), yielding accurate and reliable amplitude preservation. While the illumination compensation factor assumes a vertically linear velocity model, the method holds promise for extension to more complex media and diverse migration techniques. This suggests its applicability and adaptability beyond the specific assumptions considered in this study. In conclusion, this paper presents an innovative angle domain illumination compensation factor that significantly improves the quality of ADCIGs by addressing amplitude errors arising from irregular seismic acquisition geometries. The experimental validation using synthetic and field data confirms the effectiveness of the proposed method within the context of 3D RTM. Furthermore, the technique holds potential for broader application in more complex subsurface scenarios and various migration methodologies.

ZnO thin films co-doped with III-valence metals and halogens: theory and experiment

The efficiency of metal-halogen co-doping of ZnO thin films deposited by DC magnetron sputtering of ceramic targets has been studied theoretically and experimentally. The influence of deposition temperature (300 − 900 K range), ZnX2 pressure (10−10−1 atm), Me2O3 dopant concentration (10−3 − 10 mol %), and Zn pressure (10−14 − 10−6 atm) on the composition of ZnO − Me2O3 − ZnX2 − Zn (Me = Al, Ga, In; X = F, Cl, Br, I) systems has been analyzed theoretically. The surface migration velocity of oxides and halides is also estimated for a wide temperature range. According to the calculation results, the optimal deposition conditions have been recommended. ZnO thin films co-doped with Al+Cl, Ga+Cl, Ga+Br, Ga+I, and In+Cl were deposited using ZnO:Me:X ceramic targets sintered by chemical vapor transport based on halides. The influence of the stoichiometric deviation of ceramic targets, the concentration of halogens, and metal impurities on thin films’ electrical, structural, compositional, and optical properties has been investigated. It is shown that Ga+Cl+Zn co-doping is the most promising. This co-doping increases both the structural perfection of films (electron mobility) and doping efficiency by Ga (charge carrier concentration), reducing the resistivity of thin films by two times compared to the use of classical ZnO:Ga ceramic targets. The optimal stoichiometric deviation of ZnO:Me:X ceramics targets, corresponding to the highest electron mobility and figure of merit of thin films, has been recommended.

Temperature-dependent akinete formation strategies of the harmful cyanobacterium Dolichospermum circinale

Cyanobacteria from the orders Nostocales and certain Stigonematales form akinetes, spore-like dormant cells that allow them to survive adverse environmental conditions. Temperature is known to be one of the key factors affecting akinete formation, but there is currently little known about akinete formation during cell growth over a wide range of temperature conditions and its relation to the overall survival strategy of cyanobacteria. Therefore, in the current study, we conducted a temperature-controlled experiment to analyze the akinete formation of a harmful cyanobacterium Dolichospurmum circinale using a growth chamber. We measured the concentration and size of both vegetative cells and different types of akinetes (free, attached, and empty type) under varying temperatures (5–25 °C). We also analyzed the buoyant ability and vertical migration velocity of trichomes along with changes in the volume of vegetative cells and akinetes. The total akinete concentration and ratio (number of akinetes to total number of cells) were both found to be higher at high temperatures (20–25°C) than they were at low temperatures (5–10°C) (p<0.05). Meanwhile, the rate of formation of akinetes (both free and attached akinetes) was highest at low temperature (10 °C) and decreased with increasing temperature. The rate of empty akinete formation increased with increasing temperature and was highest at 25°C, indicating that most of the akinetes produced under high temperature conditions germinated. The change in vegetative cell size was proportional to the increase in the growth rate in response to increasing temperature (p<0.05). At high temperature, vegetative cells exhibited positive buoyancy and higher vertical migration velocity, while at low temperature, they exhibited negative buoyancy and relatively low migration velocity. Akinete size was larger at low temperature than it was at high temperature. These findings suggest that akinetes play an important role in maintaining populations in the water column, with a link between akinete formation and germination during summer cyanobacteria blooms. This information is expected to contribute to a deeper understanding of the D. circinale life cycle.

Migration characteristics of bubbles moving in gas–liquid countercurrent two-phase flow in an inclined pipe

While exploring and developing oil and gas, well kick and overflow accidents are inevitable. In such an accident, if the drilling bit is not at the bottom of the well, the drilling tool is blocked, or the reservoir contains toxic gases such as hydrogen sulfide, the traditional technique for well control is no longer suitable, and the bullheading method must be adopted to kill the well. However, during bullheading, the flow patterns of gas and liquid are intricate, making gas velocity hard to predict. To solve these problems, a set of visual simulation experimental device for directional well bullheading was built to find out the effects of wellbore inclination, liquid viscosity, gas and liquid velocities, and bubble size on bubble migration characteristics in gas–liquid countercurrent (gas flowing in opposite direction to the liquid). Prediction models of bubble distribution coefficient and rising velocity considering liquid viscosity, bubble size, and wellbore inclination angle were worked out. The experimental results show that small bubbles are mainly located in the center of the wellbore and large bubbles tend to approach the wellbore wall in gas–liquid countercurrent. Increasing wellbore inclination, viscosity, and the velocity of the liquid flowing against the bubbles results in a gradual decrease in Taylor bubble migration speed, which promotes the bubbles' pressing-back, as inhibiting the upward movement of large bubbles is essential for effective bullheading operations. The prediction models of distribution coefficient and bubble migration velocity have an error of less than 10% and 9. 78%, respectively.

The hemostatic molecular mechanism of Sanguisorbae Radix's pharmacological active components based on HSA: Spectroscopic investigations, molecular docking and dynamics simulation

The interactions between human serum albumin (HSA) and the hemostatic components of the Chinese medicine Sanguisorbae Radix (SR), specifically phenolic acid compounds such as caffeic acid (CA), ferulic acid (FA) and their 1:1 mixture (1:1) were studied to investigate the molecular mechanism underlying the hemostatic effect of SR. Network pharmacology combined with the experimental and computational data revealed that HSA is one of the hemostatic targets to SR phenolic acids. SDS-PAGE and multi-spectroscopy demonstrated that the phenolic acids bind to the Sudlow site I on HSA, altering its structure and influencing its migration velocity. There is an observed synergistic effect upon the mixture of CA and FA. Quantum chemistry, molecular docking, and molecular dynamics simulations indicate that the binding of phenolic acids to HSA is stable, and variations in binding efficiency are associated with the hydrophobicity of the substituent at the C3 position of the side chain, and also, the key amino acids and functional groups for hemostasis of SR were identified, along with the active sites that contribute to the synergistic enhancement by phenolic acids.

Research on the migration law of aggregate particles in the compaction process of asphalt mixture based on discrete element method

Asphalt mixture compaction is among the key technologies in asphalt pavement construction, but the effect of asphalt mixture mixing quality on mixture compaction performance is still unclear. This research aimed to develop an asphalt mixture compaction model by discrete element simulation and verify it by compaction degree. Asphalt mixture compaction process was simulated and the effect of asphalt mixture workability on the stress, migration law and void distribution properties of aggregate particles during compaction process was investigated. The obtained results showed that the developed asphalt mixture compaction model was reasonable and correct. The more uniform the asphalt mixture is mixed, the smaller the average force on the aggregates, the aggregate particle migration velocity, and the aggregate particle displacement during the compaction of the asphalt mixture. Under the same conditions, increasing the mixing temperature from 140℃ to 180℃ increased the average velocity of the aggregates in the asphalt mixture by 92 %. It also decreased the voids in the compacted mixture specimens. At the same time, under the action of edge effect, void distribution at the center of compacted specimen was small, void distribution around the specimen was high, and void distribution along specimen compaction force direction was also high.