Vector Preparations Research Articles

Quantification of Adeno-Associated Viral Genomes in Purified Vector Samples by Digital Droplet Polymerase Chain Reaction.

Adeno-associated virus (AAV) is a non-pathogenic virus used as a delivery vehicle to transfer therapeutic genes into patients. Accurate quantification of AAV genome copy number in vector preparations is essential for bioprocess optimization and dosage calculation in both preclinical and clinical studies of AAV-based gene therapy products. Currently, a consensus protocol for AAV viral genome titration is lacking. Here, we present a digital droplet PCR (dd_PCR) protocol for the quantification of viral genomes in purified vector samples. Samples are treated with DNase I to eliminate unpackaged contaminant DNA. DNase-treated samples are then mixed with an appropriate primer-probe set (designed according to the target AAV genome) and PCR reagents, and then loaded into a droplet generator. The prepared droplets are transferred into a PCR plate, where PCR amplification is performed and analyzed. The viral genome titer is calculated based on the concentration (copies/µL), accounting for sample dilutions. A successful measurement shows a clear separation of the positive and negative droplet clouds, has at least 10,000 accepted droplets, shows a value between 10 copies/µL and 10,000 copies/µL, and has a coefficient of variation (CV) between repeats lower than 20%. Reliable viral genome titration will aid in the development of safe and effective AAV-based gene therapy products.

Structural modification and functional improvement of lactoferrin through non-covalent and covalent binding to coffee polyphenol

Studies have suggested that milk may enhance or neutralize the bioavailability of coffee polyphenols, possibly due to reversible and irreversible interactions between coffee polyphenols and milk proteins. The effects of non-covalent and covalent binding of lactoferrin (BLF) to caffeic acid (CAA) on protein structure and function were investigated. SDS-PAGE analysis confirmed the covalent interaction between BLF and CAA. Multispectral experiments characterized the BLF-CAA complexes and conjugates, revealing alterations in the tertiary structure of the proteins in the BLF-CAA conjugates. Molecular docking and kinetics results demonstrated that hydrogen bonding, electrostatic interaction, and hydrophobic forces were the primary internal forces between CAA and BLF. When combined with CAA, the covalent conjugates exhibited superior functional properties including solubility, oxidation resistance, thermal stability, emulsification and foamability, bioaccessibility, and antimicrobial properties. This study offers a theoretical foundation and technical benchmark for the preparation of protein-based delivery vectors with synergistic effects.

A Novel and Simplified Anion Exchange Flow-Through Polishing Approach for the Separation of Full From Empty Adeno-Associated Virus Capsids.

Adeno-associated viruses (AAV) are widely used viral vectors for in vivo gene therapy. The purification of AAV, particularly the separation of genome-containing from empty AAV capsids, is usually time-consuming and requires expensive equipment. In this study, we present a novel laboratory scale anion exchange flow-through polishing method designed to separate full and empty AAV. Once the appropriate conditions are defined, this method eliminates the need for a chromatography system. Determination of optimal polishing conditions using a chromatography system revealed that the divalent salt MgCl2 resulted in better separation of full and empty AAV than the monovalent salt NaCl. The efficacy of the method was demonstrated for three distinct AAV serotypes (AAV8, AAV5, and AAV2) on two different stationary phases: a membrane adsorber and a monolith, resulting in a 4- to 7.5-fold enrichment of full AAV particles. Moreover, the method was shown to preserve the AAV capsids' functional potency and structural integrity. Following the successful establishment of the flow-through polishing approach, it was adapted to a manual syringe-based system. Manual flow-through polishing using the monolith or membrane adsorber achieved 3.6- and 5.4-fold enrichment of full AAV, respectively. This study demonstrates the feasibility of separating full and empty AAV without complex linear or step gradient elution and the necessity of specialized equipment. Flow-through polishing provides a rapid and easy-to-perform platform for polishing multiple vector preparations, addressing a critical aspect in the research and development of novel gene therapies.

A self-complementary AAV proviral plasmid that reduces cross-packaging and ITR promoter activity in AAV vector preparations

Adeno-associated viral vectors (AAV) are a leading delivery system for gene therapy in animal models and humans. With several FDA-approved AAV gene therapies on the market, issues related to vector manufacturing have become increasingly important. In this study, we focused on potentially toxic DNA contaminants that can arise from AAV proviral plasmids, the raw materials required for manufacturing recombinant AAV in eukaryotic cells. Typical AAV proviral plasmids are circular DNAs containing a therapeutic gene cassette flanked by natural AAV inverted terminal repeat (ITR) sequences, and a plasmid backbone carrying prokaryotic sequences required for plasmid replication and selection in bacteria. While the majority of AAV particles package the intended therapeutic payload, some capsids instead package the bacterial sequences located on the proviral plasmid backbone. Since ITR sequences also have promoter activity, potentially toxic bacterial open reading frames can be produced in vivo, thereby representing a safety risk. In this study, we describe a new AAV proviral plasmid for vector manufacturing that (1) significantly decreases cross-packaged bacterial sequences; (2) increases correctly packaged AAV payloads; and (3) blunts ITR-driven transcription of cross-packaged material to avoid expressing potentially toxic bacterial sequences. This system may help improve the safety of AAV vector products.

Problems of creating antibody phage libraries and their solutions.

Phage display has become an efficient, reliable and popular molecular technique for generating libraries encompassing millions or even billions of clones of divergent peptides or proteins. The method is based on the correspondence between phage genotype and phenotype, which ensures the presentation of recombinant proteins of known amino acid composition on the surface of phage particles. The use of affinity selection allows one to choose variants with affinity for different targets from phage libraries. The implementation of the antibody phage display technique has revolutionized the field of clinical immunology, both for developing tools to diagnose infectious diseases and for producing therapeutic agents. It has also become the basis for efficient and relatively inexpensive methods for studying protein-protein interactions, receptor binding sites, as well as epitope and mimotope identification. The antibody phage display technique involves a number of steps, and the final result depends on their successful implementation. The diversity, whether natural or obtained by combinatorial chemistry, is the basis of any library. The choice of molecular techniques is critical to ensure that this diversity is maintained during the phage library preparation step and during the transformation of E. coli cells. After a helper phage is added to the suspension of transformed E. coli cells, a bacteriophage library is formed, which is a working tool for performing the affinity selection procedure and searching for individual molecules. Despite the apparent simplicity of generating phage antibody libraries, a number of subtleties need to be taken into account. First, there are the features of phage vector preparation. Currently, a large number of phagemid vectors have been developed, and their selection is also of great importance. The key step is preparing competent E. coli cells and the technology of their transformation. The choice of a helper phage and the method used to generate it is also important. This article discusses the key challenges faced by researchers in constructing phage antibody libraries.

Lentiviral Vector Preparation for Efficient Gene and MicroRNA Modulation of Peritoneal Cavity Tissue-Resident Macrophages In Vivo in Mice.

Peritoneal tissue-resident macrophages have broad functions in the maintenance of homeostasis and are involved in pathologies within local and neighboring tissues. Their functions are dictated by microenvironmental cues; thus, it is essential to investigate their behavior in an in vivo physiological niche. Currently, specific peritoneal macrophage-targeting methodologies employ whole-mouse transgenic models. Here, a protocol for effective in vivo modulation of mRNA and small RNA species (e.g., microRNA) expression in peritoneal macrophages using lentivirus particles is described. Lentivirus preparations were made in HEK293T cells and purified on a single sucrose layer. In vivo validation of lentivirus effectivity following intraperitoneal injection revealed predominant infection of macrophages restricted to local tissue. Targeting of peritoneal macrophages was successful during homeostasis and thioglycolate-induced peritonitis. The limitations of the protocol, including low-level inflammation induced by intraperitoneal delivery of lentivirus and time restrictions for potential experiments, are discussed. Overall, this study presents a quick and accessible protocol for the rapid assessment of gene function in peritoneal macrophages in vivo.

Genome editing approaches with CRISPR/Cas9: the association of NOX4 expression in breast cancer patients and effectiveness evaluation of different strategies of CRISPR/Cas9 to knockout Nox4 in cancer cells

BackgroundThe increasing prevalence of cancer detection necessitated practical strategies to deliver highly accurate, beneficial, and dependable processed information together with experimental results. We deleted the cancer biomarker NOX4 using three novel genetic knockout (KO) methods. Homology-directed repair (HDR), Dual allele HITI (Du-HITI) and CRISPR-excision were utilized in this study.MethodsThe predictive value of the NOX4 expression profile was assessed using a combined hazard ratio (HR) with a 95% confidence interval (CI). With a 95% confidence interval, a pooled odd ratio (OR) was used to calculate the relationship between NOX4 expression patterns and cancer metastasis. There were 1060 tumor patients in all sixteen research that made up this meta-analysis. To stop the NOX4 from being transcribed, we employed three different CRISPR/Cas9-mediated knockdown methods. The expression of RNA was assessed using RT-PCR. We employed the CCK-8 assay, colony formation assays, and the invasion transwell test for our experiments measuring cell proliferation and invasion. Using a sphere-formation test, the stemness was determined. Luciferase reporter tests were carried out to verify molecular adhesion. Utilizing RT-qPCR, MTT, and a colony formation assay, the functional effects of NOX4 genetic mutation in CRISPR-excision, CRISPR-HDR, and CRISPR du-HITI knockdown cell lines of breast cancer were verified.ResultsThere were 1060 malignant tumors in the 16 studies that made up this meta-analysis. In the meta-analysis, higher NOX4 expression was linked to both a shorter overall survival rate (HR = 1.93, 95% CI 1.49–2.49, P < 0.001) and a higher percentage of lymph node metastases (OR = 3.22, 95% CI 2.18–4.29, P < 0.001). In breast carcinoma cells, it was discovered that NOX4 was overexpressed, and this increase was linked to a poor prognosis. The gain and loss-of-function assays showed enhanced NOX4 breast carcinoma cell proliferation, sphere-forming capacity, and tumor development. To activate transcription, the transcriptional factor E2F1 also attaches to the promoter region of the Nanog gene. The treatment group (NOX4 ablation) had substantially more significant levels of proapoptotic gene expression than the control group (P < 0.01). Additionally, compared to control cells, mutant cells expressed fewer antiapoptotic genes (P < 0.001). The du-HITI technique incorporated a reporter and a transcription termination marker into the two target alleles. Both donor vector preparation and cell selection were substantially simpler using this approach than with “CRISPR HDR” or “CRISPR excision.“ Furthermore, single-cell knockouts for both genotypes were created when this method was applied in the initial transfection experiment.ConclusionsThe NOX4 Knockout cell lines generated in this research may be used for additional analytical studies to reveal the entire spectrum of NOX4 activities. The du-HITI method described in this study was easy to employ and could produce homozygous individuals who were knockout for a specific protein of interest.

Significant Differences in Capsid Properties and Potency Between Adeno-Associated Virus Vectors Produced in Sf9 and HEK293 Cells.

For successful vector-based gene therapy manufacturing, the selected adeno-associated virus (AAV) vector production system must produce vector at sufficient scale. However, concerns have arisen regarding the quality of vector produced using different systems. In this study, we compared AAV serotypes 1, 8, and 9 produced by two different systems (Sf9/baculovirus and HEK293/transfection) and purified by two separate processes. We evaluated capsid properties, including protein composition, post-translational modification, particle content profiles, and in vitro and in vivo vector potency. Vectors produced in the Sf9/baculovirus system displayed reduced incorporation of viral protein 1 and 2 into the capsid, increased capsid protein deamidation, increased empty and partially packaged particles in vector preparations, and an overall reduced potency. The differences observed were largely independent of the harvest method and purification process. These findings illustrate the need for careful consideration when choosing an AAV vector production system for clinical production.

Modular Cloning by Golden Gate Assembly and Possible Application in Pathway Design.

Preparation of expression vectors using conventional cloning strategies is laborious and not suitable for the design of metabolic pathways or enzyme cascades, which usually requires the preparation of a vector library to identify productive clones. Recently, Modular Cloning as a novel cloning technique in synthetic biology has been developed. Modular Cloning relies on Golden Gate assembly and supports preparation of individual expression vectors in one-step and one-pot reactions, thus allowing rapid generation of vector libraries. A number of Modular Cloning toolkits for specific applications has been established, providing a collection of distinct genetic elements such as promoters, ribosome binding sites and tags, that can be combined individually in one-step using defined fusion sites. Modular Cloning has been successfully applied to generate various strains for producing value-added compounds. This was achieved by orchestrating complex pathways involving up to 20 enzymes. Due to the novelty of the genetic approach, industrial applications are still rare. In addition, some applications are limited due to the lack of high-throughput screening methods. This shifts the bottleneck from library preparation to screening capacity and needs to be addressed by future developments to pave the path for the establishment of Modular Cloning in industrial applications.

Extending AAV Packaging Cargo through Dual Co-Transduction: Efficient Protein Trans-Splicing at Low Vector Doses.

Adeno-associated viral (AAV) vectors represent one of the leading platforms for gene delivery. Nevertheless, their small packaging capacity restricts their use for diseases requiring large-gene delivery. To overcome this, dual-AAV vector systems that rely on protein trans-splicing were developed, with the split-intein Npu DnaE among the most-used. However, the reconstitution efficiency of Npu DnaE is still insufficient, requiring higher vector doses. In this work, two split-inteins, Cfa and Gp41-1, with reportedly superior trans-splicing were evaluated in comparison with Npu DnaE by transient transfections and dual-AAV in vitro co-transductions. Both Cfa and Gp41-1 split-inteins enabled reconstitution rates that were over two-fold higher than Npu DnaE and 100% of protein reconstitution. The impact of different vector preparation qualities in split-intein performances was also evaluated in co-transduction assays. Higher-quality preparations increased split-inteins' performances by three-fold when compared to low-quality preparations (60-75% vs. 20-30% full particles, respectively). Low-quality vector preparations were observed to limit split-gene reconstitutions by inhibiting co-transduction. We show that combining superior split-inteins with higher-quality vector preparations allowed vector doses to be decreased while maintaining high trans-splicing rates. These results show the potential of more-efficient protein-trans-splicing strategies in dual-AAV vector co-transduction, allowing the extension of its use to the delivery of larger therapeutic genes.

Extracellular vesicles enhance pulmonary transduction of stably associated adeno-associated virus following intratrachealadministration.

Adeno-associated virus (AAV) vector has shown multiple clinical breakthroughs, but its clinical implementation in inhaled gene therapy remains elusive due to difficulty in transducing lung airway cells. We demonstrate here AAV serotype 6 (AAV6) associated with extracellular vesicles (EVs) and secreted from vector-producing HEK-293 cells during vector preparation (EVAAV6) as a safe and highly efficacious gene delivery platform for inhaled gene therapy applications. Specifically, we discovered that EVAAV6 provided markedly enhanced reporter transgene expression in mucus-covered air-liquid interface (ALI) cultures of primary human bronchial and nasal epithelial cells as well as in mouse lung airways compared to standard preparations of AAV6 alone. Of note, AAV6 has been previously shown to outperform other clinically tested AAV serotypes, including those approved by the FDA for treating non-lung diseases, in transducing ALI cultures of primary human airway cells. We provide compelling experimental evidence that the superior performance of EVAAV6 is attributed to the ability of EV to facilitate mucus penetration and cellular entry/transduction of AAV6. The tight and stable linkage between AAV6 and EVs appears essential to exploit the benefits of EVs given that a physical mixture of individually prepared EVs and AAV6 failed to mediate EV-AAV6 interactions or to enhance gene transfer efficacy.

Querying Recombination Junctions of Replication-Competent Adeno-Associated Viruses in Gene Therapy Vector Preparations with Single Molecule, Real-Time Sequencing.

Clinical-grade preparations of adeno-associated virus (AAV) vectors used for gene therapy typically undergo a series of diagnostics to determine titer, purity, homogeneity, and the presence of DNA contaminants. One type of contaminant that remains poorly investigated is replication-competent (rc)AAVs. rcAAVs form through recombination of DNA originating from production materials, yielding intact, replicative, and potentially infectious virus-like virions. They can be detected through the serial passaging of lysates from cells transduced by AAV vectors in the presence of wildtype adenovirus. Cellular lysates from the last passage are subjected to qPCR to detect the presence of the rep gene. Unfortunately, the method cannot be used to query the diversity of recombination events, nor can qPCR provide insights into how rcAAVs arise. Thus, the formation of rcAAVs through errant recombination events between ITR-flanked gene of interest (GOI) constructs and expression constructs carrying the rep-cap genes is poorly described. We have used single molecule, real-time sequencing (SMRT) to analyze virus-like genomes expanded from rcAAV-positive vector preparations. We present evidence that sequence-independent and non-homologous recombination between the ITR-bearing transgene and the rep/cap plasmid occurs under several events and rcAAVs spawn from diverse clones.

A new UltraScan module for the characterization and quantification of analytical buoyant density equilibrium experiments to determine AAV capsid loading.

A method for characterizing and quantifying peaks formed in an analytical buoyant density equilibrium (ABDE) experiment is presented. An algorithm is derived to calculate the concentration of the density forming gradient material at every point in the cell, provided the rotor speed, temperature, meniscus position, bottom of the cell position, and the loading concentration, molar mass, and partial specific volume of the density gradient-forming material are known. In addition, a new peak fitting algorithm has been developed which allows the user to automatically quantify the peaks formed in terms of density, apparent partial specific volume, and relative abundance. The method is suitable for both ionic and non-ionic density forming materials and can be used with data generated from the UV optical system as well as the AVIV fluorescence optical system. These methods have been programmed in a new UltraScan-III module (us_abde). Examples are shown that demonstrate the application of the new module to adeno-associated viral vector preparations and proteins.

Large-scale purification of functional AAV particles packaging the full genome using short-term ultracentrifugation with a zonal rotor

Adeno-associated virus (AAV) vector-based gene therapy is potentially curative for various genetic diseases; however, the development of a scalable purification method for full-genome AAV vectors remains crucial to increase productivity and reduce cost of GMP production. In this study, we developed a large-scale short-term purification method for functional full-genome AAV particles by using 2-step cesium chloride (CsCl) density-gradient ultracentrifugation with a zonal rotor. The 2-step CsCl method with a zonal rotor improves separation between empty and full-genome AAV particles, reducing the ultracentrifugation time (4–5 h) and increasing the AAV volume for purification. The highly purified full-genome AAV particles were confirmed by analytical ultracentrifugation (AUC), droplet digital PCR (ddPCR) in the whole region of the AAV vector genome, transduction efficiency in target cells, and transmission electronic microscopy (TEM). The high-purity AAV9 particles were obtained using culture supernatant during vector preparation rather than cell lysate. CsCl could be simply removed by a hydroxyapatite column. Interestingly, ddPCR analysis revealed that “empty” AAV particles contain small fragments of the inverted terminal repeat (ITR), probably due to unexpected packaging of Rep-mediated ITR fragments. This large-scale functional AAV vector purification with ultracentrifugation would be effective for gene therapy.

A novel biocompatible polymer derived from D-mannitol used as a vector in the field of genetic engineering of eukaryotic cells

The design and preparation of new vectors to transport genetic material and increase the transfection efficiency continue being an important research line. Here, a novel biocompatible sugar-based polymer derived from D-mannitol has been synthesized to be used as a gene material nanocarrier in human (gene transfection) and microalga cells (transformation process). Its low toxicity allows its use in processes with both medical and industrial applications. A multidisciplinary study about the formation of polymer/p-DNA polyplexes has been carried out using techniques such as gel electrophoresis, zeta potential, dynamic light scattering, atomic force microscopy, and circular dichroism spectroscopy. The nucleic acids used were the eukaryotic expression plasmid pEGFP-C1 and the microalgal expression plasmid Phyco69, which showed different behaviors. The importance of DNA supercoiling in both transfection and transformation processes was demonstrated. Better results were obtained in microalga cells nuclear transformation than in human cells gene transfection. This was related to the plasmid’s conformational changes, in particular to their superhelical structure. It is noteworthy that the same nanocarrier has been used with eukaryotic cells from both human and microalga.

Extra-viral DNA in adeno-associated viral vector preparations induces TLR9-dependent innate immune responses in human plasmacytoid dendritic cells

Adeno-associated viral (AAV) vector suspensions produced in either human derived HEK cells or in Spodoptera frugiperda (Sf9) insect cells differ in terms of residual host cell components as well as species-specific post-translational modifications displayed on the AAV capsid proteins. Here we analysed the impact of these differences on the immunogenic properties of the vector. We stimulated human plasmacytoid dendritic cells with various lots of HEK cell-produced and Sf9 cell-produced AAV-CMV-eGFP vectors derived from different manufacturers. We found that AAV8-CMV-eGFP as well as AAV2-CMV-eGFP vectors induced lot-specific but not production platform-specific or manufacturer-specific inflammatory cytokine responses. These could be reduced or abolished by blocking toll-like receptor 9 signalling or by enzymatically reducing DNA in the vector lots using DNase. Successful HEK cell transduction by DNase-treated AAV lots and DNA analyses demonstrated that DNase did not affect the integrity of the vector but degraded extra-viral DNA. We conclude that both HEK- and Sf9-cell derived AAV preparations can contain immunogenic extra-viral DNA components which can trigger lot-specific inflammatory immune responses. This suggests that improved strategies to remove extra-viral DNA impurities may be instrumental in reducing the immunogenic properties of AAV vector preparations.

Intravitreal Injection of AAV for the Transduction of Mouse Retinal Ganglion Cells.

The injection of therapies into the eye is common practice, both clinically and pre-clinically. The most straightforward delivery route is via an intravitreal injection, which introduces the treatment into the largest cavity at the posterior of the eye. This technique is frequently used to deliver gene therapies, including those containing recombinant adeno-associated viral vectors (AAVs), to the back of the eye to enable inner retinal targeting. This chapter provides detailed methodology on how to successfully perform an intravitreal injection in mice. The chapter covers vector preparation considerations, advice on how to minimize vector loss in the injection device, and ways to reduce vector reflux from the eye when administering a therapy. Finally, a protocol is provided on common retinal histology processing techniques to assess vector-mediated expression in retinal ganglion cells. It is hoped that this chapter will enable researchers to carry out effective and consistent intravitreal injections that transduce the inner retinal surface while avoiding common pitfalls.

High-Level rAAV Vector Production by rAdV-Mediated Amplification of Small Amounts of Input Vector.

The successful application of recombinant adeno-associated virus (rAAV) vectors for long-term transgene expression in clinical studies requires scalable production methods with genetically stable components. Due to their simple production scheme and the high viral titers achievable, first generation recombinant adenoviruses (rAdV) have long been taken into consideration as suitable tools for simultaneously providing both the helper functions and the AAV rep and cap genes for rAAV packaging. So far, however, such rAdV-rep/cap vectors have been difficult to generate and often turned out to be genetically unstable. Through ablation of cis and trans inhibitory function in the AAV-2 genome we have succeeded in establishing separate and stable rAdVs for high-level AAV serotype 2 Rep and Cap expression. These allowed rAAV-2 production at high burst sizes by simple coinfection protocols after providing the AAV-ITR flanked transgene vector genome either as rAAV-2 particles at low input concentrations or in form of an additional rAdV. With characteristics such as the ease of producing the required components, the straightforward adaption to other transgenes and the possible extension to further serotypes or capsid variants, especially the rAdV-mediated rAAV amplification system presents a very promising candidate for up-scaling to clinical grade vector preparations.

DNA read count calibration for single-molecule, long-read sequencing

There are many applications in which quantitative information about DNA mixtures with different molecular lengths is important. Gene therapy vectors are much longer than can be sequenced individually via short-read NGS. However, vector preparations may contain smaller DNAs that behave differently during sequencing. We have used two library preparations each for Pacific Biosystems (PacBio) and Oxford Nanopore Technologies NGS to determine their suitability for quantitative assessment of varying sized DNAs. Equimolar length standards were generated from E. coli genomic DNA. Both PacBio library preparations provided a consistent length dependence though with a complex pattern. This method is sufficiently sensitive that differences in genomic copy number between DNA from E. coli grown in exponential and stationary phase conditions could be detected. The transposase-based Oxford Nanopore library preparation provided a predictable length dependence, but the random sequence starts caused the loss of original length information. The ligation-based approach retained length information but read frequency was more variable. Modeling of E. coli versus lambda read frequency via cubic spline smoothing showed that the shorter genome could be used as a suitable internal spike-in for DNAs in the 200 bp to 10 kb range, allowing meaningful QC to be carried out with AAV preparations.

Direct ITR-to-ITR Nanopore Sequencing of AAV Vector Genomes.

Recombinant adeno-associated viruses (rAAVs) are currently the most prominently investigated vector platform for human gene therapy. The rAAV capsid serves as a potent and efficient vehicle for delivering genetic payloads into the host cell, while the vector genome determines the function and effectiveness of these biotherapies. However, current production schemes yield vectors that may consist of heterogeneous populations, compromising their potencies. The development of next-generation sequencing methods within the past few years have helped investigators profile the diversity and relative abundances of heterogenous species in vector preparations. Specifically, long-read sequencing methods, like single molecule real-time (SMRT) sequencing, have been used to uncover truncations, chimeric genomes, and inverted terminal repeat (ITR) mutations in vectors. Unfortunately, these sequencing platforms may be inaccessible to investigators with limited resources, require large amounts of input material, or may require long wait times for sequencing and analyses. Recent advances with nanopore sequencing have helped to bridge the gap for quick and relatively inexpensive long-read sequencing needs. However, their limitations and sample biases are not well-defined for sequencing rAAV. In this study, we explored the capacity for nanopore sequencing to directly interrogate rAAV content to obtain full-length resolution of encapsidated genomes. We found that the nanopore platform can cover the entirety of rAAV genomes from ITR to ITR without the need for pre-fragmentation. However, the accuracy for base calling was low, resulting in a high degree of miscalled bases and false indels. These false indels led to read-length compression; thus, assessing heterogeneity based on read length is not advisable with current nanopore technologies. Nonetheless, nanopore sequencing was able to correctly identify truncation hotspots in single-strand and self-complementary vectors similar to SMRT sequencing. In summary, nanopore sequencing can serve as a rapid and low-cost alternative for proofing AAV vectors.