Variable Surface Charge Research Articles

Charge Modulation at the Liquid Crystal Droplet-Aqueous Interface Enables Ultrasensitive, Nonspecific Protein Detection.

Thermotropic nematic liquid crystals (LC) have been utilized to sense/detect various analytes such as polymers, surfactants, lipids, etc. However, their use for protein detection depends on pre-adsorbed molecules, co-nematogens, or biomolecular agents for specificity.This approach impedes the platform's sensitivity with a detection limit for the folded proteins generally reported in the micromolar concentration range. Here, this work provides fundamental insights into the type of molecular interactions and their modulation that can drive ultrasensitive protein detection at an LC microdroplet/aqueous interface formed without adding an auxiliary co-nematogen. Using ultraviolet (UV) light treated 4-cyano-4'-pentylbiphenyl (5CB) LC and a flow-focused microfluidic device, we prepared different populations of monodisperse and highly negatively charged microdroplets in water. Adding an aqueous solution of various model proteins(α-synuclein, α-chymotrypsin, myoglobin, or bovine serum albumin, BSA) with different secondary structures and surface charges triggers a rapid radial- to bipolar-defect transition in these microdroplets. Isothermal titration calorimetry measurement and molecular dynamic simulation studies attribute this to the dominant electrostatic force-mediated adsorption of proteins at the LC/aqueous interface.Further, bioconjugation-based variation of protein surface charge allows tuning their detection limit.These findings can provide crucial physical cues for designing responsive LC systems and establishing a foundation for developing versatile, molecularly tailored, and highly specific biomolecular detection platforms.

Dependence of clay–water contact angle on surface charge and ambient temperature: A study from molecular dynamics perspective

The clay-water contact angle emerges as a pivotal parameter essential for elucidating various engineering challenges. Its variability is closely linked to surface charge and ambient temperature, thereby exerting significant influence on soil’s hydraulic properties. However, current research on the joint effects of ambient temperature and surface charge on clay’s contact angle is incomplete, lacking insights from molecular dynamics perspective. Focusing on Young’s contact angle, this study has established diverse montmorillonite-water systems under varying surface charge conditions (cation exchange capacity = 0, 27.60, 54.84, 108.38, and 134.73 meq/100 g) and ambient temperatures (277, 293, 313, 353, 393, and 433 K) through the molecular dynamics (MD) method. The liquid phase boundary is determined by extracting density contour plots and a unified conical curve is introduced to quantitatively analyze the contact angle calculated by MD simulations. This approach led to the development of a nonlinear equation for estimating contact angle variations under different surface charges and ambient temperatures. Finally, the proposed equation is validated against literature data, demonstrating a strong correlation with experimental findings. It exhibits remarkable accuracy in predicting the variations of contact angles induced by ambient temperature under various surface charge conditions. These findings offer valuable insights and practical equation for designing clay impermeable layers in engineering applications.

Analysis of electroviscous effects in electrolyte liquid flow through a heterogeneously charged uniform microfluidic device

Charge-heterogeneity (i.e., surface charge variation in the axial direction of the device) introduces non-uniformity in flow characteristics in the microfluidic device. Thus, it can be used for controlling practical microfluidic applications, such as mixing, mass, and heat transfer processes. This study has numerically investigated the charge-heterogeneity effects in the electroviscous (EV) flow of symmetric (1:1) electrolyte liquid through a uniform slit microfluidic device. The Poisson’s, Nernst-Planck (N-P), and Navier–Stokes (N-S) equations are numerically solved using the finite element method (FEM) to obtain the flow fields, such as total electrical potential (U), excess charge (n *), induced electric field strength (E x), and pressure (P) fields for following ranges of governing parameters: inverse Debye length (2 ≤ K ≤ 20), surface charge density (4 ≤ S 1 ≤ 16), and surface charge-heterogeneity ratio (0 ≤ S rh ≤ 2). Results have shown that the total potential (∣ΔU∣) and pressure (∣ΔP∣) drop maximally increase by 99.09% (from 0.1413 to 0.2812) (at K = 20, S 1 = 4) and 12.77% (from 5.4132 to 6.1045) (at K = 2, S 1 = 8), respectively with overall charge-heterogeneity (0 ≤ S rh ≤ 2). Electroviscous correction factor (Y, i.e., ratio of effective to physical viscosity) maximally enhances by 12.77% (from 1.2040 to 1.3577) (at K = 2, S 1 = 8), 40.98% (from 1.0026 to 1.4135) (at S 1 = 16, S rh = 1.50), and 41.35% (from 1 to 1.4135) (at K = 2, S rh = 1.50), with the variation of S rh (from 0 to 2), K (from 20 to 2), and S 1 (from 0 to 16), respectively. Further, a simple pseudo-analytical model is developed to estimate the pressure drop in EV flow, accounting for the influence of charge-heterogeneity based on the Poiseuille flow in a uniform channel. This model predicts the pressure drop ± 2%–4% within the numerical results. The robustness and simplicity of this model enable the present numerical results for engineering and design aspects of microfluidic applications.

A Minimal PBPK Model Describes the Differential Disposition of Silica Nanoparticles In Vivo.

Nanoparticles (NPs) have emerged as promising candidates for drug delivery due to their tunable physical and chemical properties. Among these, silica nanoparticles (SiNPs) are particularly valued for their biocompatibility and adaptability in applications like drug delivery and medical imaging. However, predicting SiNP biodistribution and clearance remains a significant challenge. To address this, we developed a minimal physiologically-based pharmacokinetic (mPBPK) model to simulate the systemic disposition of SiNPs, calibrated using in vivo PK data from mice. The model assesses how variations in surface charge, size, porosity, and geometry influence SiNP biodistribution across key organs, including the kidneys, lungs, liver, and spleen. A global sensitivity analysis identified the most influential parameters, with the unbound fraction and elimination rate constants for the kidneys and MPS emerging as critical determinants of SiNP clearance. Non-compartmental analysis (NCA) further revealed that aminated SiNPs exhibit high accumulation in the liver, spleen, and kidneys, while mesoporous SiNPs primarily accumulate in the lungs. Rod-shaped SiNPs showed faster clearance compared to spherical NPs. The mPBPK model was extrapolated to predict SiNP behavior in humans, yielding strong predictive accuracy with Pearson correlation coefficients of 0.98 for mice and 0.92 for humans. This model provides a robust framework for predicting the pharmacokinetics of diverse SiNPs, offering valuable insights for optimizing NP-based drug delivery systems and guiding the translation of these therapies from preclinical models to human applications.

A Strategic Blend of Stabilizing Polymers to Control Particle Surface Charge for Enhanced Mucus Transport and Cell Binding.

Mucus layers, viscoelastic gels abundant in anionic mucin glycoproteins, obstruct therapeutic delivery across all mucosal surfaces. We found that strongly positively charged nanoparticles (NPs) rapidly adsorb a mucin protein corona in mucus, impeding cell binding and uptake. To overcome this, we developed mucus-evading, cell-adhesive (MECS) NPs with variable surface charge using Flash NanoPrecipitation, by blending a neutral poly(ethylene glycol) (PEG) corona for mucus transport with a small amount, 5 wt%, of polycationic dimethylaminoethyl methacrylate (PDMAEMA) for increased cell targeting. In vitro experiments confirmed rapid mucus penetration and binding to epithelial cells by MECS NPs, suggesting a breakthrough in mucosal drug delivery.

Heat-Excitation-Based Triboelectric Charge Promotion Strategy.

The surface charge decay is observed at high temperatures due to thermionic emission, which, however, may not be the only mechanism contributing to the surface charge variation. Here, a triboelectric charge promotion strategy due to the heat-excitation effect of hot electrons near the fermi level is demonstrated, while the final charge is determined by the balance between thermionic emission and the heat-excitation effect. It is demonstrated that metals with lower work function exhibit a better heat excitation capability, and polymers with lower fluorine content in molecule chains further boost the charge output, where metal/Kapton pairs demonstrated a charge promotion of over 2 times at the temperature of 383K with good durability during 90min measurement. The heat-excitation effect and charge durability in sliding freestanding-triboelectric-layer (SFT) mode triboelectric nanogenerator (TENG) is demonstrated as well, where the energy is promoted by over 3 times and the capacitor charging speed is doubled as well, with an energy promotion from 109.34 to 373µJ per cycle to successfully trigger a discharger. This work suggests a promising future of the heat-excitation effect as a new charge promotion strategy for TENG toward different applications in high-temperature environments.

Chemical and Physical Characterization of Three Oxidic Lithological Materials for Water Treatment

Water treatment necessitates the sustainable use of natural resources. This paper focuses on the characterization of three oxidic lithological materials (OLMs) with the aim of utilizing them to prepare calcined adsorbent substrates for ionic adsorption. The three materials have pH levels of 7.66, 4.63, and 6.57, respectively, and organic matter contents less than 0.5%. All of the materials are sandy loam or loamy sand. Their electric conductivities (0.18, 0.07, and 0.23 dS/m) show low levels of salinity and solubility. Their CEC (13.40, 13.77, and 6.76 cmol(+)kg) values are low, similar to those of amphoteric oxides and kaolin clays. Their aluminum contents range from 7% up to 12%, their iron contents range from 3% up to 7%, their titanium contents range from 0.3% to 0.63%, and their manganese contents range from 0.007% up to 0.033%. The amphoteric oxides of these metals are responsible for their ionic adsorption reactions due to their variable charge surfaces. Their zirconium concentrations range from 100 to 600 mg/g, giving these materials the refractory properties necessary for the preparation of calcined adsorbent substrates. Our XRD analysis shows they share a common mineralogical composition, with quartz as the principal component, as well as albite, which leads to their thermal properties and mechanical resistance against abrasion. The TDA and IR spectra show the presence of kaolinite, which is lost during thermal treatments. The results show that the OLMs might have potential as raw materials to prepare calcined adsorbent substrates for further applications and as granular media in the sustainable treatment of both natural water and wastewater.

Role of the structural order of the hydration layer in regulating the heterogeneous ice nucleation efficiency

Understanding the complex microscopic mechanisms of heterogeneous ice nucleation is crucial across diverse fields from cloud science to microbiology. In this work, we examined the ability of solid surfaces to promote ice nucleation as a function of the structural order of interfacial water, including the first and second hydration layers. Comprehensive all-atom molecular dynamics simulations using the TIP4P/ice water model were conducted on a water film atop a modeled surface inspired by the (0001) surface of AgI crystal, with varying surface charges. These simulations revealed non-monotonic nucleation rates. The first hydration layer formed a hexagonal hydrogen-bond network resembling ice structures, exhibiting low mobility essential for inducing ice nucleation. Notably, the second hydration layer, acting as a key-point bridge, displayed varying degrees of orientational preference facilitated by inter-layer hydrogen bonds. The calculation of fluctuation parameters indicated that the greater structural order of the second layer significantly enhances the surface’s ice-forming capabilities. Unlike previous studies that focused primarily on the role of the first layer of interfacial water, our findings demonstrate that the second layer provides a more accurate indicator of ice nucleation capabilities.

Molecular-Resolution Imaging of Ionic Liquid/Alkali Halide Interfaces with Varied Surface Charge Densities via Atomic Force Microscopy.

When in contact with charged solid surfaces, ionic liquids (ILs) are known to form solvation structures consisting of alternating cation and anion layers. This phenomenon is considered to originate from the adsorption layer of counterions overcompensating the surface charge, so-called overscreening. However, the response of these layers to surfaces with near-zero or extremely high surface charge density (σ) remains inadequately understood. Here, we probe the solvation structure of ILs on alkali halide surfaces with varied surface orientations: nearly zero-charged RbI(100) and highly charged RbI(111), by employing frequency modulation atomic force microscopy with atomic resolution. Two commonly used ILs are examined in this study: 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C3mpyr][NTf2]) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][NTf2]). On RbI(100) surfaces with near zero σ, we observe alternating cation and anion layers, diverging from the previously proposed monolayer model for IL/alkali halide(100) interfaces. These results support the argument that overscreening occurs under low σ, even approaching zero, and reconcile conflicting experimental conclusions about low σ systems. On RbI(111) surfaces with high σ, we identify solvation structures consisting of two consecutive counterion layers. This structure aligns with the theoretically predicted crowding; a phenomenon rarely observed in commonly used ILs due to typically unreachable σ in electrochemical IL/electrode systems. Our findings indicate that alkali halide(111) surfaces are potentially valuable for exploring the crowding phenomenon in ILs, addressing the current scarcity of experimental observations.

Silica 3D printed scaffolds as pH stimuli-responsive drug release platform

Silica-based scaffolds are promising in Tissue Engineering by enabling personalized scaffolds, boosting exceptional bioactivity and osteogenic characteristics. Moreover, silica materials are highly tunable, allowing for controlled drug release to enhance tissue regeneration. In this study, we developed a 3D printable silica material with controlled mesoporosity, achieved through the sol-gel reaction of tetraethyl orthosilicate (TEOS) at mild temperatures with the addition of different calcium concentrations. The resultant silica inks exhibited high printability and shape fidelity, while maintaining bioactivity and biocompatibility. Notably, the increased mesopore size enhanced the incorporation and release of large molecules, using cytochrome C as a drug model. Due to the varying surface charge of silica depending on the pH, a pH-dependent control release was obtained between pH 2.5 and 7.5, with maximum release in acidic conditions. Therefore, silica with controlled mesoporosity could be 3D printed, acting as a pH stimuli responsive platform with therapeutic potential.

Advanced Potentiometric Configuration to Enhance Stability and Reliability of AlGaN/GaN HEMT-Based Water-Gated pH Sensor

High-electron mobility transistor (HEMT) sensors show great promise for achieving direct, real-time, and label-free detection. Leveraging the distinctive characteristics of the two-dimensional electron gas (2DEG), HEMT sensors can amplify current fluctuations related to potential changes when molecules are introduced, making them extremely sensitive to surface charge variations. The introduction of a water-gated HEMT (WGHEMT) sensor represents a significant advancement, enabling precise detection of pH levels across a broad spectrum, from acidic pH 2 to basic pH 12. Comprising an inner and outer pool with an ion-selective membrane situated in between, the WGHEMT pH sensor exhibits excellent voltage and current sensitivity of 43.71 mV pH−1 and 144.42 μA pH−1, respectively. It features a rapid response time of 12 s and demonstrates remarkable stability and reliability, with coefficients of variation (C.V.) of 0.29%, 0.12%, 0.26%, 0.24%, 0.28%, and 0.28% for pH 2, pH 4, pH 6, pH 8, pH 10, and pH 12, respectively. The sensor maintains its performance with only 10% degradation after 5 months of repeated measurements and exposure to various pH levels. The WGHEMT pH sensor’s excellent sensitivity, linearity, hysteresis, rapid response time, stability, and reliability highlight its potential for practical deployment in real-world applications.

Scattering of a Bessel Pincer Light-Sheet Beam on a Charged Particle at Arbitrary Size.

Electromagnetic scattering is a routine tool for rapid, non-contact characterization of particle media. In previous work, the interaction targets of scattering intensity, scattering efficiency, and extinction efficiency of Bessel pincer light-sheet beams were all aimed at dielectric spheres. However, most particles in nature are charged. Considering the boundary condition on a charged sphere, the beam shape coefficients (BSCs) (pmn,qmn) of the charged spherical particle illuminated by a Bessel pincer light-sheet beam are obtained. The extinction, scattering, and absorption efficiencies are derived under the generalized Lorenz-Mie theory (GLMT) framework. This study reveals the significant differences in scattering characteristics of Bessel pincer light-sheet beams on a charged particle compared to traditional beams. The simulations show a few apparent differences in the far-field scattering intensity and efficiencies between charged and natural spheres under the influence of dimensionless size parameters. As dimensionless parameters increase, the difference between the charged and neutral spheres decreases. The effects of refractive index and beam parameters on scattering, extinction, and absorption coefficients are different but tend to converge with increasing dimensionless parameters. When applied to charged spheres with different refractive indices, the scattering, extinction, and absorption efficiencies of Bessel pincer light-sheet beams change with variations in surface charge. However, once the surface charge reaches saturation, these efficiencies become stable. This study is significant for understanding optical manipulation and super-resolution imaging in single-molecule microbiology.

Enhancing antibacterial efficacy through propolis-infused electroactive polymers: A novel approach to combat antibiotic resistance

The increasing prevalence of antibiotic-resistant illnesses worldwide calls for the development of novel antibacterial strategies, including the ones based on antibacterials materials. This work reports on the combined antibacterial effects of piezoelectric poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) and propolis, a natural antimicrobial agent, on various material structures (2D films and 3D structures) to increase the surface contact area. It is shown that the addition of propolis has a substantial impact on the surface texture and mechanical properties of the materials. In particular, 3D structures exhibit improved distribution of propolis and enhanced mechanical stability in comparison to 2D films. The antibacterial experiments conducted on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) demonstrate a significant increase in the reduction of bacteria, in particular when larger concentrations of propolis are applied and when mechanical stimulation is used at specified frequencies, taking therefore advantage of the surface charge variation associated to the piezoelectric response. It is particularly significant the antibacterial effect on the resistant S.aureus bacteria, emphasising the huge potential of this novel hybrid material in biomedical applications. Thus, it is demonstrated that piezoelectric polymers in combination with natural antibacterial agents, represents a suitable approach to address microbial resistance, with important applications in areas including wound dressings, implant coatings, and high traffic surfaces, among others.

Statistical Copolymerization-Induced Self-Assembly.

Statistical copolymers have been extensively used in chemical industries and our daily lives, owing to their ease of synthesis and functionalization. However, self-assembly based on statistical copolymers has been haunted by high interfacial energy, poor stability, and low concentration. We proposed the statistical copolymerization-induced self-assembly (stat-PISA) as a general strategy for one-step preparing stable statistical copolymer assemblies with high solids content. The concept was demonstrated through a model dispersion polymerization system comprising a charged hydrophilic monomer and a core-forming monomer, producing spherical micelles via a spinodal decomposition mechanism with an interconnected network intermediate. The stat-PISA was tunable by varying the fraction of charged monomer, the polymer chain length, and the solids content. The statistical copolymer micelles were demonstrated to be a potential Pickering emulsifier with superior stabilizing performances compared to their block copolymer counterparts. The general applicability of stat-PISA was demonstrated by preparing statistical copolymer assemblies with varying surface charges and chemical compositions. Particularly, this strategy is feasible for conventional free radical polymerization, promising for industrial scale-up.

Illuminating Pathways to Dynamic Nanotribology: Light-Mediated Active Control of Interfacial Friction with Nanosuspensions.

Active control of nanotribological properties is a challenge. Materials responsive to external stimuli may catalyze this paradigm shift. Recently, the nanofriction of a thin film is modulated by light, ushering in phototribology. This frontier is expanded here, by investigating photoactive nanoparticles in lubricants to confer similar functionality to passive surfaces. Quartz-crystal microbalance (QCM) is employed to assess the phototribological behavior of aqueous suspensions of titanium dioxide nanoparticles. A comparison of dark and illuminated conditions provides the first demonstration of tuning the interfacial friction in solid-nanosuspension interfaces by light. Cyclic tests reveal reversible transitions between higher (dark) and lower friction (illuminated) regimes. These transitions are underpinned by transient states with surface charge variations, as confirmed by Zeta potential measurements. The accumulated surface charge increases repulsion within the system and favors sliding. Upon cessation of illumination, the system returns to its prior equilibrium state. These findings impact not only nanotribology but nanofluidics and nanorheology. Furthermore, the results underscore the need to consider light-induced effects in other scenarios, including the calculation of activity coefficients of photoactive suspensions. This multifaceted study introduces a new dimension to in operando frictional tuning, beckoning a myriad of applications and fundamental insights at the nanoscale.

Silylation of phosphorylated cellulosic fibers with an aminosilane

In this work, phosphorylated cellulosic fibers were functionalized with an aminosilane ((3-aminopropyl)triethoxysilane, APTES) using a simple and economical method. Several characterization were performed to determine the types of bonds between phosphorylated fibers and grafted APTES. The thermal behavior, hydrophobicity and surface charge variation as a function of pH of the multifunctional cellulose fibers were determined.Results demonstrate that APTES should proceed through Si-O-C, and possibly Si-O-P, covalent bonds with cellulose although the dimerization of silane through Si-O-Si bonds has also been observed. The terminal amino groups are expected to be partially involved in hydrogen bonds with phosphate hydroxyl groups found at phosphorylated cellulose fiber surface, causing a pulling in the configuration of the grafted APTES. The two chemical modifications proposed in this work do not significantly modify the morphology of cellulose fibers. XRD analysis also shows that the crystal structure of the phosphorylated fibers did not change after functionalization with APTES. The silylated phosphorylated fibers show potential flame-retardant properties with improved hydrophobicity. Furthermore, the functionalization of phosphorylated fibers with APTES changes the pH of zero charge point from 3.2 to 9.4 and providing a zwitterionic structure suitable for the simultaneous adsorption of both cationic and anionic species.

Generalizing electroosmotic-flow predictions over charge-modulated periodic topographies: tuneable far-field effects

The classical Helmholtz–Smoluchowski (HS) model of electroosmosis holds for homogeneously charged interfaces in contact with a fluid layer bearing an equal and opposite net charge. However, inhomogeneities in the surface charge and topography are inevitable, either as practical materials and fabrication artefacts, or at times as deliberately introduced modulations for flow control. In an effort to arrive at an analytically tractable theoretical framework for addressing the underlying electro-mechanical coupling, here, we generalize the traditional HS theory to an extent where both the surface charge and topographies may bear arbitrary and independent periodic forms. Using a spectral-asymptotic approach, we further arrive at closed-form expressions for describing the resulting electroosmotic pumping for topographic features with small characteristic amplitude to pattern period ratio, as relevant for most practical scenarios. We subsequently execute full-scale numerical simulations without any restrictions on the surface charge and topography variations to assess the efficacy of the theoretical framework. The corresponding test beds include distinctive signature patterns – for example, a square-wave surface charge distribution on trapezoidal pit topographies. Our results reveal that the charge–topography interplay induces an anisotropic flow drift, deviating from the classical HS paradigm. This, in turn, provides new quantitative insights into highly selective electroosmotic flow control via judicious design of the charge and topographical patterns, resulting in controllable accentuation, attenuation, nullification, deflection and even complete reversal of the flow. Our analysis further establishes a provision of estimating the zeta potentials of naturally ‘contaminated’ surfaces, as well as explaining the electrophoresis of large inhomogeneous particles; a paradigm that remained to be explored thus far.

Cellulose Nanofibrils/Alginates Double-Network Composites: Effects of Interfibrillar Interaction and G/M Ratio of Alginates on Mechanical Performance.

Interfibrillar phases and bonding in cellulose nanofibril (CNF)-based composites are crucial for materials performances. In this study, we investigated the influence of CNF surface characteristics, the guluronic acid/mannuronic acid ratio, and the molecular weight of alginates on the structure, mechanical, and barrier properties of CNF/alginate composite films. Three types of CNFs with varying surface charges and nanofibril dimensions were prepared from wood pulp fibers. The interfacial bonding through calcium ion cross-linking between alginate and carboxylated CNFs (TCNFs) led to significantly enhanced stiffness and strength due to the formation of an interpenetrating double network, compared to composites from alginates and CNFs with native negative or cationic surface charges. Various alginates extracted from Alaria esculenta (AE) and Laminaria hyperborea (LH) were also examined. The TCNF/AE composite, prepared from alginate with a high mannuronic acid proportion and high molecular weight, exhibited a Young's modulus of 20.3 GPa and a tensile strength of 331 MPa under dry conditions and a Young's modulus of 430 MPa and a tensile strength of 9.3 MPa at the wet state. Additionally, the TCNF/AE composite demonstrated protective properties as a barrier coating for fruit, significantly reducing browning of banana peels and weight loss of bananas stored under ambient conditions.

The surface charge of electroactive materials governs cell behaviour through its effect on protein deposition

The precise mechanisms underlying the cellular response to static electric cues remain unclear, limiting the design and development of biomaterials that utilize this parameter to enhance specific biological behaviours. To gather information on this matter we have explored the interaction of collagen type-I, the most abundant mammalian extracellular protein, with poly(vinylidene fluoride) (PVDF), an electroactive polymer with great potential for tissue engineering applications. Our results reveal significant differences in collagen affinity, conformation, and interaction strength depending on the electric charge of the PVDF surface, which subsequently affects the behaviour of mesenchymal stem cells seeded on them. These findings highlight the importance of surface charge in the establishment of the material–protein interface and ultimately in the biological response to the material. Statement of significanceThe development of new tissue engineering strategies relies heavily on the understanding of how biomaterials interact with biological tissues. Although several factors drive this process and their driving principles have been identified, the relevance and mechanism by which the surface potential influences cell behaviour is still unknown. In our study, we investigate the interaction between collagen, the most abundant component of the extracellular matrix, and poly(vinylidene fluoride) with varying surface charges. Our findings reveal substantial variations in the binding forces, structure and adhesion of collagen on the different surfaces, which collectively explain the differential cellular responses. By exposing these differences, our research fills a critical knowledge gap and paves the way for innovations in material design for advanced tissue regeneration strategies.

Deciphering the Dynamic Assembling-Disassembling of Small Molecules on Solid/Liquid Interfaces within Microchannels by Pulsed Streaming Potential Measurement.

Assembling small molecules at liquid/solid interfaces is relatively common and contributes to many unique properties of the interface. However, such an assembling process can be dynamic depending on the concentration of the molecule and the properties of the solid and liquid themselves, which poses serious challenges on the accurate evaluation of the assembling processes. Herein, we report a convenient way for in situ and real-time monitoring of assembling-disassembling of small-molecule surfactants on the surface of microchannels using pulsed streaming potential (SP) measurement based on the variation of surface charge. With this technique, five distinctive kinetic regimes, each responsible for a characteristic molecular behavior, can be differentiated during a typical assembling-disassembling cycle. Significant difference of the assembling-disassembling process was clearly reflected for surfactants with hydrophobic tails of only a two -CH2- difference (C16TAB/C18TAB and D10DAB/D12DAB). The relative SP (Er) value is positively correlated with the molecular weight at a concentration of 0.1 mM for the same kinds of surfactants. Moreover, the assembling kinetics of D10DAB exhibits an "overshoot effect" at high concentration, which means morphology adjustment. The consequences of such assembling/disassembling of these molecules for electrophoretic separation, protein immobilization, and photocatalysis in a microchannel were investigated through dynamic characterization, which proves its potential as a tool for dynamic solid/liquid interface characterization.