Color Variation Research Articles

Ultrasound-assisted improvement of thawing quality of Tibetan pork by inhibiting oxidation

The challenge of meat quality degradation due to transportation difficulties in high-altitude plateaus underscores the importance of an efficient thawing process for Tibetan pork to ensure its quality. This study compared four thawing methods ultrasound thawing (UT), refrigerator thawing (RT), hydrostatic thawing (HT), and microwave thawing (MT) to assess their impact on the quality of Tibetan pork, focusing on thawing loss, tenderness, color variation, and alterations in protein secondary structure and moisture content. Additionally, the study examined the impact of thawing on the metabolites of Tibetan pork using metabolomics techniques. The results indicated that UT yielded the highest quality samples. UT significantly accelerated the thawing rate and had minimal impact on tenderness compared to traditional thawing methods. Moreover, protein and lipid oxidation levels were reduced by UT treatment. Furthermore, it enhanced the binding capacity of protein and water molecules, reduced drip loss, and maintained meat color stability. What’s more, amino acid metabolites such as l-glutamic acid, l-proline, oxidized glutathione, and 1-methylhistidine played a significant role in thawing oxidation in Tibetan pork, exhibiting a positive correlation with protein oxidation. UT resulted in a notable decrease in the levels of hypoxanthine and 2-aminomethylpyrimidine, contributing to the reduction of bitterness in the thawed meat and consequently enhancing the freshness of Tibetan pork. This study offers novel insights into understanding the biological changes occurring during the thawing process, while also furnishing a theoretical framework and technical assistance to improve the quality of Tibetan pork and propel advancements in food processing technology.

Evaluating the bio-functionalities of Ti-6Al-7Nb alloy after surface modification using electrical discharge machining

The present work evaluates the influence of surface modification on the bio-functionalities of Ti-6Al-7Nb alloy in terms of apatite formation, metal ion release rate and anti-bacterial activities. The surface modification in the form of change in surface integrity, and increases in the exposed surface area, has been achieved using wire-electrical discharge machining (WEDM) and electrical discharge μ-drilling(EDD). Due to high discharge energies, molten material will deposit on the parent material (recast layer), which increases the surface roughness (parent surface 0.5 μm to 2.34 μm) and hardness (patent material 304VH to 385VH) after subsequent re-solidification and quenching. Surface roughness and hardness near the micro-drilled hole are observed to increase. After surface modification, the apatite formation is increased on Ti-6Al-7Nb alloy with increasing immersion time and the ion released rate was found lowest on the WEDMed surface as compared to micro drilled and polished surface. Field-emission electron scanning microscopy (FESEM) and energy dispersive x-ray spectroscopy (EDAX) observations confirmed the presence of phosphate and calcium ions on the WEDMed surface and nearby the micro-drilled surface. The variation in colour of the simulated body fluid (SBF) after the immersion of WEDMed, EDD, and polished samples indicates the variable effecton pH levels of the SBF solution for three types of samples.The anti-bacterial bioactivity of Ti-6Al-7Nb was found to be better on the WEDMed surface as compared to polished surfaces, which is due to the formation of a rutile-TiO2 layer on WEDMed surface.

Regiospecific Coelenterazine Analogs for Bioassays and Molecular Imaging.

Bioluminescence (BL) generated by luciferase-coelenterazine (CTZ) reactions is broadly employed as an optical readout in bioassays and in vivo molecular imaging. In this study, we demonstrate a systematic approach to elucidate the luciferase-CTZ binding chemistry with a full set of regioisomeric CTZ analogs, where all the functional groups were regiochemically modified. When the chemical structures were categorized into Groups 1-6, the even-numbered Groups (2, 4, and 6) of the CTZ analogs are found to be exceptionally bright with NanoLuc enzyme. A CTZ analogue M2 was the brightest with NanoLuc and the reason was deciphered by a computational analysis of the binding modes. We also report that (i) the regioisomeric CTZ analogs collectively create unique intensity patterns according to each marine luciferase, (ii) the quantitative structure-activity relationship analysis revealed the roles of respective functional groups of CTZ analogs, and (iii) the regioisomeric CTZ analogs also exert red shifts of the BL spectra and color variation: that is, the λmax values are near 500 nm with NanoLuc, near 530 nm with ALuc16, and near 570 nm with RLuc86SG. The advantages of the regioisomeric CTZ analogs were finally demonstrated using (i) a dual-luciferase system with M2-specific NanoLuc and native CTZ-specific ALuc16, (ii) an estrogen activatable single-chain BL probe by imaging, and (iii) BL imaging of live mice bearing tumors expressing NanoLuc and RLuc8.6SG. This study is the first systematic approach to elucidate the regiochemistry in BL imaging studies. This study provides new insights into how CTZ analogs regiochemically work in BL reporter systems and guides the specific applications to molecular imaging.

Influence of using different toothpaste during bleaching with violet LED light (405nm) on the colour and roughness of dental enamel: an in vitro study.

This in vitro study aimed to investigate potential changes in the color and roughness of dental enamel resulting from the use of different toothpaste formulations during bleaching with violet LED light (405nm). Sixty specimens of bovine incisors, each measuring 6 × 6 × 3mm, were segregated into six distinct experimental groups based on their respective treatments (n = 10): C + VL: Brushing with Colgate® Total 12 + bleaching with violet LED; LB + VL: Brushing with Colgate® Luminous White Brilliant + bleaching with violet LED; LI + VL: Brushing with Colgate® Luminous White Instant + violet LED bleaching; C: Brushing with Colgate® Total 12; LB: Brushing with Colgate® Luminous White Brilliant; LI: Brushing with Colgate® Luminous White Instant. The examined variables included alterations in color (∆L*, ∆a*, ∆b*, ∆Eab, and ∆E00), surface roughness (Ra), and scanning electron microscopy observations. No statistically significant distinctions emerged in total color variations (∆E00 and ∆E) among the groups under scrutiny. Notably, the groups that employed Colgate® Luminous White Instant displayed elevated roughness values, irrespective of their association with violet LED, as corroborated by scanning electron microscopy examinations. It can be concluded that whitening toothpastes associated to violet LED do not influence the color change of dental enamel in fifteen days of treatment. Toothpastes with a higher number of abrasive particles showed greater changes in enamel roughness, regardless of the use of violet LED.

Rapid assessment of acetophenone using an anti-interfering triple-emission Ln3+-functionalized HOF@MOF sensor

The development of high-performance sensors for rapidly detecting acetylacetone (AP) in water samples is necessary because its release into the environment can result in many vital problems for human health and environment. Herein, we first designed a hybrid by integrating HOF with ZIF-8 through a sequential growth strategy. By separately introducing blue-emitting SiQDs and green- and red-emitting Tb3+ and Eu3+ into ZIF-8 and HOF, the resultant ZIF-8@SiQDs@HOF@Eu3+@Tb3+ comprised three emission peaks at 484, 545 and 620 nm, all of which could be employed as switch-off responsive peaks to low concentrations of AP with a detection limit of 0.79 ppm. However, in environments with high concentrations of AP, a turn-on signal at 484 nm was observed. Thereupon, the ratiometric fluorescence intensity of the ternary emission varied within different concentration ranges, accompanied by the fluorescence color evolution from red to salmon to plum to purple to final blue. Moreover, a portable sensing film was fabricated for rapid warning, sensitive and visual determination of AP in complicated environments. Therefore, this triple-emission sensor with wide color variations and strong anti-interference advantages could promote further research to improve the selectivity, sensitivity and inherent self-correction of multimodal fluorescence detection and the ease of sensing operation.

Molecular Identification Validates Morphological Identification of Javanese Cardamom from Banyumas in Central Java, Indonesia

Cardamom is one of the prominent plants with significant economic value in the Banyumas Regency, Central Java, Indonesia. Although Javanese cardamom is traditionally categorized under Amomum compactum, the morphological variations observed create ambiguity about its exact species status. DNA barcoding using the maturase K (matK) and ribulose-bisphosphate carboxylase (rbcL) genes is proven as a reliable technique to elucidate the taxonomic status of morphological variable plant cultivars. This study aimed to characterize cardamom from Banyumas Regency using morphological and molecular approaches for taxonomic status identification and genetic diversity evaluation. The matK and rbcL genes were selected as genetic markers and sequenced using a bidirectional sequencing technique. Morphological examination showed significant color variations at the cardamom stem base. All samples had high genetic identities to reference species in databases and were supported by high query cover and zero e-values. Therefore, molecular characterization, alongside geographic distribution assessment, established that this plant belongs to a single species, Amomum compactum. Additionally, the analysis conducted showed a low level of genetic diversity, as evidenced by haplotype and nucleotide diversity. Low-level genetic diversity provides additional data to convince that cardamon in Banyumas Regency belongs to a single species. These results are essential data in seed selection for further cultivation.

Development of red to blue emissive fluorescent materials for cyanide ion sensing and single-component inks in digital printing application

The work designed and described here is for the effective recognition of cyanide ion. A novel core (PC) with coumarin moiety as a signaling unit and pyridinium as an acceptor unit and these moieties linked by π-conjugation. In which CN− ion binds in the pyridine ring via nucleophilic addition and produces changes that are captured by different techniques to prove its sensing efficiency. The probe displays a visual color variation to pale orange from purple and also exhibits blue fluorescence from red fluorescence upon cyanide addition. The probe PC sensing ability towards CN− ion has been confirmed by various spectral measurement. In UV–visible technique, a blue shift was observed by the probe with CN− ion. In fluorescence measurements, a peak appeared at 704 nm, which corresponds to the probe encountering a peak enhancement with the added cyanide ion. The binding stoichiometric ratio among the probe and CN− ion is to be 1:1 in jobs method. The probes detection limit and binding constant were calculated to be 0.39 nM and 7.07x104 M. The probe is used as a single component ink and injected into a cartridge and printed on paper which is used as a tool to detect cyanide in water. Besides, the probe successfully senses cyanide ion in various water samples.

Effect of Shell Cover Color on Solar Absorptance and Environmental Heating of Cricket Helmets: A Pilot Study

The objective of this pilot study was to quantify and describe the effect of shell cover color on solar absorptance, a1 (%; mean ± SD) and the temperature of the cricket helmet shell covers, Thsc (°C; mean ± SD) during exposure to a hot outdoor environment (WBGT 32.5 ± 1.9 °C; ACSM Heat Index Black; Extreme Danger STOP). We measured and recorded a1 in yellow, red and black cricket helmets using a micro-solarimeter. Thermographic imaging was used to quantify differential Thsc . Variations in shell cover color had a statistically significant (p<0.0002) 2-fold effect on a1 . At the end of 30-minute trials, variations in color and a1 resulted in 3.6 to 6.0 °C difference in Thsc between helmets. Although speculative, the color of cricket helmet shell covers may have a functionally significant effect of exertional heat illnesses, EHIs (ranging from dehydration to heat stroke). Incorporating reflective nanocomposites particles into the material used in the construction of the Lycra® shell covers and XENOY™ shells may facilitate passive cooling of cricket helmets and ultimately reduce EHIs.

Comparative Transcriptome Analysis Reveals Differential Cutaneous Gene Expression in the Color Variation of Two Ornamental Discus, Red Melon and Red Cover.

Red Melon (RM) and Red Cover (RC) discus (Symphysodon spp.) are ornamental fish varieties that were selectively bred from the wild parental lineages of the brown discus S. aquafaciatus over many generations, resulting in distinct cutaneous patterns from juveniles to adults. To better understand the underlying mechanisms, skin samples were collected from juveniles aged 60 days and adults aged 1 year from RM and RC for investigations. Microscopic observation detected xanthophores and erythrophores in all samples, except RC juveniles with no erythrophores. Melanophores were presented only in RC. The comparative analysis revealed that genes involved in pteridine synthesis (gch1 and zgc:153031), one-carbon metabolism (aldh1l2 and zgc153031), and lipid metabolism (apoda and klf1) were differentially expressed in RM juveniles, which may be associated with the development of erythrophores and xanthophores. The temporal inhibition of melanophore differentiation and development was observed in RM juveniles, coupled with elevated expression of notum2 and sost, two antagonist genes in Wnt-signaling, suggesting their roles in melanophore development. Distinct pigment pattern between RM and RC since the juvenile stage may be driven by the differential expression of multiple axial developmental genes, including GATA, ankyrin, and mitotic spindle orientation proteins. This is the first report to describe the differential growth of cutaneous pigments and the molecular processes involved in red discus. The results provided valuable insights into pigment pattern differences in an interesting ornamental fish model.

Identifying potential anthocyanin biosynthesis regulator in Chinese cherry by comprehensive genome-wide characterization of the R2R3-MYB transcription factor gene family

BackgroundChinese cherry [Cerasus pseudocerasus (Lindl.) G.Don] (syn. Prunus pseudocerasus Lindl.) is an economically important fruiting cherry species with a diverse range of attractive colors, spanning from the lightest yellow to the darkest black purple. However, the MYB transcription factors involved in anthocyanin biosynthesis underlying fruit color variation in Chinese cherry remain unknown.ResultsIn this study, we characterized the R2R3-MYB gene family of Chinese cherry by genome-wide identification and compared it with those of 10 Rosaceae relatives and Arabidopsis thaliana. A total of 1490 R2R3-MYBs were classified into 43 subfamilies, which included 29 subfamilies containing both Rosaceae MYBs and AtMYBs. One subfamily (S45) contained only Rosaceae MYBs, while three subfamilies (S12, S75, and S77) contained only AtMYBs. The variation in gene numbers within identical subfamilies among different species and the absence of certain subfamilies in some species indicated the species-specific expansion within MYB gene family in Chinese cherry and its relatives. Segmental and tandem duplication events primarily contributed to the expansion of Chinese cherry R2R3-CpMYBs. The duplicated gene pairs underwent purifying selection during evolution after duplication events. Phylogenetic relationships and transcript profiling revealed that CpMYB10 and CpMYB4 are involved in the regulation of anthocyanin biosynthesis in Chinese cherry fruits. Expression patterns, transient overexpression and VIGS results confirmed that CpMYB10 promotes anthocyanin accumulation in the fruit skin, while CpMYB4 acts as a repressor, inhibiting anthocyanin biosynthesis of Chinese cherry.ConclusionsThis study provides a comprehensive and systematic analysis of R2R3-MYB gene family in Chinese cherry and Rosaceae relatives, and identifies two regulators, CpMYB10 and CpMYB4, involved in anthocyanin biosynthesis in Chinese cherry. These results help to develop and utilize the potential functions of anthocyanins in Chinese cherry.

Assessment of a color measurement-based method for the characterization of polymer thermo-oxidation

Epoxy resins are used in various applications where environmental factors can interact and degrade the material. Thermo-oxidation is one of the degradation processes that can lead to both mechanical and chemical changes. This work aims to present a technique for characterizing thermo-oxidative degradation based on color analysis. The UV–vis spectroscopy reveals the direct link between the chemical modification and the color variation. The color difference ΔEab* between a virgin and an aged sample (in CIELAB color space) provides an excellent indicator of oxidation degree. Calibration correlations have been developed based on reference samples aged under known conditions of temperature and pressure, translating color differences into an oxidation equivalent duration, represented as an equivalent time t* or to directly estimate mechanical properties. The t* parameter is the time that the sample should be exposed to the reference conditions to undergo the same oxidation level (equivalent to the same color difference change and then, degradation). Nanoindentation measurements were performed to validate the color measurement method. Some limitations were identified, including the poor correlation under non-equivalent time-temperature-pressure conditions, poor relevance for assessing high oxidation levels, and the impact of light scattering in areas with strong color gradients. The spatial resolution of color measurement is ten times higher than nanoindentation. Furthermore, the color measurement is non-destructive, can be conducted in situ, and is suitable for monitoring the aging of industrial components.

Intelligent Biopolymer-Based Films: Promising New Solutions for Food Packaging Applications.

The development of biopolymer-based films represents a promising direction in the packaging industry that responds to stringent needs for sustainability, reducing the ecological impact. Traditional fossil-derived polymers present major concerns because of their long decomposition time and their significant contribution to the pollution of the environment. On the contrary, biopolymers such as chitosan, PVA, and PLA offer viable alternatives. This study aimed to obtain an innovative pH indicator for smart packaging using a synthetic non-toxic anthocyanin analogue dye incorporated in bio-based films to indicate meat freshness and quality. The pH-responsive color-changing properties of the dye make it suitable for developing intelligent films to monitor food freshness. The obtained polymeric films were characterized by FT-IR and UV-VIS spectroscopy, and their thermal properties were assessed using thermogravimetric methods. Moisture content, swelling capacity, and water solubility of the polymeric films were also evaluated. The sensitivity of the biopolymer-flavylium composite films to pH variations was studied in the pH range of 2 to 12 and noticeable color variations were observed, allowing the monitoring of the meat's quality damage through pH changes. The pH-responsive films were applied directly on the surface or in the proximity of pork and chicken meat samples, to evaluate their colorimetric response to fresh and spoilt meat. This study can be the starting point for creating more durable packaging solutions leading to a circular economy.

MORPHOLOGICAL AND MOLECULAR CHARACTERIZATION OF Donax faba (BIVALVIA: DONACIDAE) OBTAINED FROM KUTANG BEACH, LAMONGAN, INDONESIA

ARTICLE HIGLIGHTSThis study revealed 19 morphological variations of edible wedge clams, Donax faba (Bivalvia: Donacidae), from Kutang Beach, Lamongan, Indonesia, which has significant role as part of coastal ecosystem.This reseach also highlights the DNA barcoding of Donax faba based on COI gene (Cytochrome C Oxidase Subunit I).The average genetic distance of the research samples was 0.46%, while the value of this parameter between the research samples and the ingroup was found to be 1.51%. ABSTRACTDonax faba is a type of wedge clams with significant ecological and economic roles, as well as variations in color, pattern, and morphometric properties. Recently, a particular population of unidentified D. faba was reported from Kutang Beach, Lamongan, Indonesia. Therefore, this research aimed to assess the morphological variations and molecular characteristics of D. faba obtained from Kutang Beach based on COI gene. A total of 288 samples were collected during the lowest tide for morphological characterization of the color, pattern, and morphometrics of the shells. Additionally, molecular characterization was conducted based on the composition of nucleotide bases and amino acids of COI gene, genetic distance, as well as the relationships. The results showed that D. faba had 19 morphological variations, among which the most dominant type contained a whitish exterior with brown spots and a whitish purple interior. The average genetic distance of the samples was 0.46%, while the value was calculated as 1.51% between the samples and the ingroup. Automatic Barcode Gap Discovery (ABGD) analysis performed using a prior maximal distance of 0.001 showed the separation of these species into distinct categories.

Influence of Ca3(PO4)2 on the Surface Morphology and Properties of a CaO-Al2O3-SiO2-Fe2O3-Based High Temperature Phase Reconstructed Complex.

In this study, a glaze slurry was prepared with different contents of tricalcium phosphate. It was then applied to a fly ash microcrystalline ceramic billet and sintered at 1180 °C for 30 min to prepare the complex. The aim was to obtain a high value-added application of fly ash in order to reduce environmental pollution. The study systematically investigated the influence of the Ca3(PO4)2 content on the crystal phase evolution, physical-mechanical properties, and micro-morphology of the complex. The results showed that products sintered at 1180 °C with 8 wt% Ca3(PO4)2 demonstrated better performance, with a water absorption of 0.03% and a Vickers microhardness of 6.5 GPa. Additionally, the study observed a strong correlation between the Ca3(PO4)2 content and the opacity effect. A feasible opacity mechanism was also proposed to explain the variation of glaze colors and patterns with different contents of Ca3(PO4)2.

Product Colour Variation Management with Artificial Intelligence

This research focuses on the topic of using AI in color variant management in products to enhance the appeal and performance of the products in the marketplace by incorporating artificial intelligence, deep learning, and neural network systems. Real-time consumer and product information, preferences, buying history, and sales history; I created an AI model to predict and change product colors in real-time. The complete workflow used comprises data gathering, processing, and feature extraction, model training, integration of the color adjustment software tools, and finally, testing and validation. The efficiency of such AI-driven interventions was analyzed through the consumer satisfaction indices, the sales results, and the engagement data based on the consumption of digital platforms. This study demonstrates valuable potential of AI to improve product design application and development while providing valuable suggestions for Businesses adapting and improving market outcomes according to the changing consumer trends. Such an application of AI implements a new best practice in ways of enhancing futuristic consumer-oriented marketing approaches. The paper was first completed in 2021 and later I have modified the paper with latest updates till date 2024.

In Situ Electrochemical Interfacial Polymerization for Covalent Organic Frameworks with Tunable Electrochromism.

A rapid in situ synthesis of electrochromic covalent organic frameworks (EC-COFs) was proposed by using green electrochemical interface polymerization of N,N,N',N'-tetrakis(4-aminophenyl)-1,4-benzenediamine (TPDA) and 2,5-dihydroxyterephthalaldehyde (DHBD). The synthetized TPDA-DHBD films exhibit stable polymorphic color variations under different applied potentials, which can be attributed to the redox state changes of bis(triphenylamine) and imine electroactive functional groups within the COFs skeleton. TPDA-DHBD represents markedly different electrochromisms from red to cyan due to the steric hindrance effect caused by the presence of UO2 2+, demonstrating the unique tunability of COFs materials. This work offers a new feasible idea for rapid EC-COFs synthesis and tunable EC-COFs realization.

In Situ Electrochemical Interfacial Polymerization for Covalent Organic Frameworks with Tunable Electrochromism

A rapid in situ synthesis of electrochromic covalent organic frameworks (EC‐COFs) was proposed by using green electrochemical interface polymerization of N,N,N’,N’‐tetrakis(p‐aminophenyl)p‐phenylenediamine (TPDA) and 2,5‐dihydroxy‐p‐phenylenedicarboxaldehyde (DHBD). The synthetized TPDA‐DHBD films exhibit stable polymorphic colour variations under different applied potentials, which can be attributed to the redox state changes of bis(triphenylamine) and imine electroactive functional groups within the COFs skeleton. TPDA‐DHBD represents markedly different electrochromisms from red to cyan due to the steric hindrance effect caused by the presence of UO22+, demonstrating the unique tunability of COFs materials. This work offers a new feasible idea for rapid EC‐COFs synthesis and tunable EC‐COFs realization.

A smartphone-based supramolecular biosensor for portable and rapid detection of buprofezin in real food samples

Buprofezin (BUP) is an insect growth regulator widely used in agriculture to control hemipteran pests, particularly the melon aphid, Aphis gossypii, due to its efficiency and low toxicity. Although approved by the Chinese government, its maximum residue limit (MRL) in food is strictly regulated, and conventional techniques for detecting BUP have several limitations. Our study reports successful BUP detection using a supramolecular fluorescent probe DP@ALB, constructed with chalcone-based fluorescent dye DP and albumin as the host. The probe offers advantages such as low cost, visual signal output with high fluorescence color variation, rapid response, and high sensitivity. Additionally, portable test strips enable convenient on-site BUP detection and simplifying field monitoring of spiked real samples. The study achieves precise qualitative and quantitative BUP analysis in grape fruit, groundwater, and soil with satisfactory recoveries. Further, the biological applicability of sensor for the in vitro detection of BUP in L929 living cells was demonstrated. This research breakthrough overcomes the limitations of traditional analytical methods, offering an efficient and reliable approach for food and environmental monitoring and pesticide residue detection.

Sexual color ornamentation, microhabitat choice, and thermal physiology in the common wall lizard (Podarcis muralis).

Common wall lizards (Podarcis muralis) in Italy show a striking variation in body coloration across the landscape, with highly exaggerated black and green colors in hot and dry climates and brown and white colors in cool and wet climates. Males are more intensely colored than females, and previous work has suggested that the maintenance of variation in coloration across the landscape reflects climatic effects on the strength of male-male competition, and through this sexual selection. However climatic effects on the intensity of male-male competition would need to be exceptionally strong to fully explain the geographic patterns of color variation. Thus, additional processes may contribute to the maintenance of color variation. Here we test the hypothesis that selection for green and black ornamentation in the context of male-male competition is opposed by selection against ornamentation because the genes involved in the regulation of coloration have pleiotropic effects on thermal physiology, such that ornamentation is selected against in cool climates. Field observations revealed no association between body coloration and microhabitat use or field active body temperatures. Consistent with these field data, lizards at the extreme ends of the phenotypic distribution for body coloration did not show any differences in critical minimum temperature, preferred body temperature, temperature-dependent metabolic rate, or evaporative water loss when tested in the laboratory. Combined, these results provide no evidence that genes that underlie sexual ornamentation are selected against in cool climate because of pleiotropic effects on thermal biology.

Meat Color, Marbling, and the Evaluation of Defects in Beef and Pork at the Point of Purchase

Intentions to purchase meat and repeat purchasing patterns will depend on the consumer’s perception of intrinsic and extrinsic quality cues. In order to discover consumers’ insights into the quality of pork and beef, the main objective of this study was to investigate meat color, marbling, and types of fresh meat defects. A total of 50 samples of meat were analyzed for three quality characteristics on different levels. This study applied a statistical calculation of a loss function invented by Taguchi. The results showed the values of variations in meat color and marbling that present the limits of consumers’ tolerance. Based on the obtained results, it was determined that the tolerable level of color variations of beef is 3.61, while for pork, this limit is 2.00. The most preferred marbling percentages were 21% and 5.74% for beef and pork, respectively. On the other hand, the negative effect of defects was the strongest for “dark cutting” for beef and “blood spotting” for pork loins.