Variation Of Optical Properties Research Articles

Cathodoluminescence emission and electron energy loss absorption from a 2D transition metal dichalcogenide in van der Waals heterostructures

Nanoscale variations of optical properties in transition metal dichalcogenide (TMD) monolayers can be explored with cathodoluminescence (CL) and electron energy loss spectroscopy (EELS) using electron microscopes. To increase the CL emission intensity from TMD monolayers, the MoSe2 flakes are encapsulated in hexagonal boron nitride (hBN), creating van der Waals (VdW) heterostructures. Until now, the studies have been exclusively focused on scanning transmission electron microscopy (STEM-CL) or scanning electron microscopy (SEM-CL), separately. Here, we present results, using both techniques on the same sample, thereby exploring a large acceleration voltage range. We correlate the CL measurements with STEM-EELS measurements acquired with different energy dispersions, to access both the low-loss region at ultra-high spectral resolution, and the core-loss region. This provides information about the weight of the various absorption phenomena including the direct TMD absorption, the hBN interband transitions, the hBN bulk plasmon, and the core losses of the atoms present in the heterostructure. The S(T)EM-CL measurements from the TMD monolayer only show emission from the A exciton. Combining the STEM-EELS and S(T)EM-CL measurements, we can reconstruct different decay pathways leading to the A exciton CL emission. The comparison with SEM-CL shows that this is also a good technique for TMD heterostructure characterization, where the reduced demands on sample preparation are appealing. To demonstrate the capabilities of SEM-CL imaging, we also measured on a SiO2/Si substrate, quintessential in the sample preparation of two-dimensional materials, which is electron-opaque and can only be measured in SEM-CL. The CL-emitting defects of SiO2 make this substrate challenging to use, but we demonstrate that this background can be suppressed by using lower electron energy.

Contribution of individual phonon to the band gap renormalization in semiconductors

Understanding the origin of temperature-dependent bandgap in semiconductors is essential for their applications in photovoltaics, optoelectronic and space applications. In this regard the electron–phonon coupling is known to play a crucial role in the temperature dependence of the bandgap of semiconductors. Several models have also been proposed in this regard which are also found experimentally compatible; however, these models need to account for more information about the contribution of individual modes in band gap renormalization. The present report is an analytical attempt to do so by utilizing the Bose–Einstein oscillator model, thereby discussing a method for finding the individual renormalization term contributed by respective phonon modes to the overall bandgap. This study contributes to the fundamental understanding of the temperature variation of optical properties of semiconductors that correlates with the role of electron–phonon interaction.

P‐109: Investigation of Low Residual Stress Anti Reflection Coating with High Hardness for Display Applications

Anti reflection coating with high hardness on the OLED display surface was studied to improve the wear resistance and visibility of OLED. However, the high residual stress inside the multilayer thin film configuration of anti reflection coating has been a problem and the improvement is necessary. In this study, the residual stress and optical properties variation on various deposition conditions on the thin film were investigated. In addition, we suggested new coating structure using nanocomposites to overcome the residual stress of films.

Probing the variations of synthesis, antimicrobial activity, and optical properties of new lanthanide and transition metal complexes of salicylaldehyde‐dipropylenetriamine ligand

Probing the variations of synthesis, antimicrobial activity, and optical properties of new lanthanide and transition metal complexes of salicylaldehyde‐dipropylenetriamine ligand

Developing a Portable Autofluorescence Detection System and Its Application in Biological Samples.

Advanced glycation end-products (AGEs) are complex compounds closely associated with several chronic diseases, especially diabetes mellitus (DM). Current methods for detecting AGEs are not suitable for screening large populations, or for long-term monitoring. This paper introduces a portable autofluorescence detection system that measures the concentration of AGEs in the skin based on the fluorescence characteristics of AGEs in biological tissues. The system employs a 395 nm laser LED to excite the fluorescence of AGEs, and uses a photodetector to capture the fluorescence intensity. A model correlating fluorescence intensity with AGEs concentration facilitates the detection of AGEs levels. To account for the variation in optical properties of different individuals' skin, the system includes a 520 nm light source for calibration. The system features a compact design, measuring only 60 mm × 50 mm × 20 mm, and is equipped with a miniature STM32 module for control and a battery for extended operation, making it easy for subjects to wear. To validate the system's effectiveness, it was tested on 14 volunteers to examine the correlation between AGEs and glycated hemoglobin, revealing a correlation coefficient of 0.49. Additionally, long-term monitoring of AGEs' fluorescence and blood sugar levels showed a correlation trend exceeding 0.95, indicating that AGEs reflect changes in blood sugar levels to some extent. Further, by constructing a multivariate predictive model, the study also found that AGEs levels are correlated with age, BMI, gender, and a physical activity index, providing new insights for predicting AGEs content and blood sugar levels. This research supports the early diagnosis and treatment of chronic diseases such as diabetes, and offers a potentially useful tool for future clinical applications.

Moiré superlattices arising from growth induced by screw dislocations in layered materials

Abstract Moiré superlattices (MSLs) are modulated structures produced from homogeneous or heterogeneous two-dimensional layers stacked with a twist angle and/or lattice mismatch. Enriching the methods for fabricating MSL and realizing the unique emergent properties are key challenges on its investigation. Here we recommend that the spiral dislocation driven growth is another optional method for the preparation of high quality MSL samples. The spiral structure stabilizes the constant out-of-plane lattice distance, causing the variations in electronic and optical properties. Taking SnS2 MSL as an example, we find prominent properties including large band gap reduction (~0.4 eV) and enhanced optical activity. First-principles calculations reveal that these unusual properties can be ascribed to the locally enhanced interlayer interaction associated with the Moiré potential modulation. We believe that the spiral dislocation driven growth would be a powerful method to expand the MSL family and broaden their scope of application.

Quantifying changes in oxygen saturation of the internal jugular vein in vivo using deep neural networks and subject-specific three-dimensional Monte Carlo models.

Central venous oxygen saturation (ScvO2) is an important parameter for assessing global oxygen usage and guiding clinical interventions. However, measuring ScvO2 requires invasive catheterization. As an alternative, we aim to noninvasively and continuously measure changes in oxygen saturation of the internal jugular vein (SijvO2) by a multi-channel near-infrared spectroscopy system. The relation between the measured reflectance and changes in SijvO2 is modeled by Monte Carlo simulations and used to build a prediction model using deep neural networks (DNNs). The prediction model is tested with simulated data to show robustness to individual variations in tissue optical properties. The proposed technique is promising to provide a noninvasive tool for monitoring the stability of brain oxygenation in broad patient populations.

Selective gas detection using phase change material infused photonic crystal

A photonic crystal-based optical gas detector is proposed, incorporating phase change material (PCM) to modulate the sensing properties. The multi-gas detection process is designed in the range of 650 nm to 2500 nm. Ge2Sb2Te5 (GST) is employed as a phase change material with significant optical property variations. It can exist in two self-sustaining, bi-stable phases: a crystalline GST (CGST) and an amorphous GST (AGST). The dielectrics (i.e., Si, SiO2, GST, and Au) are used in various combinations, such as Au-Si, Au-Si-SiO2, Au-GST-SiO2, and GST-Au. Plane light waves are used to model the nanoporous structures over a broad wavelength range (650 nm to 2500 nm). The optical spectral response of the structures, including the reflectivity spectrum, power absorption spectrum, and electric field distribution, is investigated by varying the GST thickness, dimension, and geometry of the nanoholes. Liquid ammonia has the highest selectivity of any gas from 650 nm to 1000 nm, at about 29%, whereas carbon monoxide has the maximum sensitivity of 32%. The interchanging of layers increases the sensitivity of all the gases. With a sensitivity and selectivity of 78% and 40%, respectively, carbon monoxide exhibits the greatest values.

Tailoring electrical properties of PVC/PEC/Co3O4 nanocomposites by electron beam irradiation for advanced medium voltage cable applications

This study aimed to investigate the effects of electron beam irradiation on the structural, optical, and electrical properties of polyvinyl chloride/pectin (PVC/PEC) nanocomposites incorporating hexagonal nanoplate Co3O4. Hexagonal nanoplate Co3O4 was synthesized and incorporated into PVC/PEC blends at 5 wt%. The nanocomposites were subjected to electron beam irradiation at varying doses (0, 10, 20, and 30 kGy). Various characterization techniques, including XRD, UV–Vis spectroscopy, AC conductivity, and dielectric measurements, were employed to analyze the irradiated samples. Additionally, electric field distribution simulations were performed for a 33 kV cable model. XRD analysis revealed the retention of Co3O4 crystallinity up to 30 kGy, while the polymer matrix showed degradation above 10 kGy. The optical bandgap decreased from 2.25 eV to 1.90 eV with increasing irradiation dose, indicating changes in the electronic structure. The optimized AC conductivity (37.17 × 10−6 S m−1) and minimum relative permittivity (2.28) were achieved for the 30 kGy irradiated sample with 5 wt% Co3O4. The electric potential distribution gradually decreased from 33,000 V to zero V. The systematic variations in structural, optical, and electrical properties demonstrated controlled tuning of charge transport mechanisms, making these nanocomposites potentially suitable for advanced cable systems. The simulation results showed that the inclusion of Co3O4 at 30 kGy helped maintain a uniform electric field distribution in the 33 kV cable model compared to an unfilled cable.

Anomalous variations of optical properties in the vicinity of level anti-crossing in InAs/GaAs conical quantum dot nanowire

The present study focuses on the investigation of the linear and nonlinear optical properties corresponding to electronic transitions in the vicinity of Level Anti-Crossing (LAC) points from a theoretical perspective. The system under consideration is an InAs conical quantum dot embedded in an infinite GaAs nanowire. The special configuration of the system leads to repeatedly LAC points in the energy spectrum of the system, three of which are considered here. The findings indicate a forward-backward shift in the energy location of the linear and non-linear Absorption Coefficient (AC) around the LAC. On the other hand, it is demonstrated that in this vicinity, AC for the transition to one of the crossing levels vanishes while that of the other maximizes. It is also found that, save for the lowest transition, the nonlinear component has essentially little share of the total AC, nearly for all incident photon energies, due to the limited and low values of the transition dipole moment.

Investigating electronic structure and optical property variations in full and semi-hydrogenated Janus MoSSe monolayers

By employing first principles calculations, we have developed three novel and stable hydrogenated Janus MoSSe materials, and conducted a comparative investigation of their electronic structures and optical properties. The pristine Janus MoSSe demonstrates characteristics of a direct band gap semiconductor with a band gap of 1.60 eV, exhibiting properties typical of a P-type semiconductor. Upon complete hydrogenation on the S side and Se side, the band gap decreases to 0.84, 0.34, resulting in N-type, P-type semiconductors, respectively. while the hydrogenation on both sides, the band gap is 0, and the material show metallic property. The work functions after hydrogenation are consistently lower than those of the pristine Janus MoSSe. In terms of optical properties, the absorption intensity in the visible light range is higher for the S side case than the Se side case, while the reflectivity of the S side case is lower. This indicates that the S side case is more suitable for applications in photo-electric devices in both the visible light and infrared ranges. Therefore, through first principles calculations, we have explored three types of novel and stable hydrogenated Janus MoSSe configurations, examining their fundamental properties and potential applications.

Construction of Aerosol Model and Atmospheric Correction in the Coastal Area of Shandong Peninsula

Applying standard aerosol models for atmospheric correction in nearshore coastal waters introduces significant uncertainties due to their inability to accurately represent aerosol characteristics in these regions. To improve the accuracy of remote sensing reflectance (Rrs) products in the nearshore waters of the Shandong Peninsula, this study develops an aerosol model based on aerosol data collected from the Mu Ping site in the coastal area of the Shandong Peninsula, enabling tailored atmospheric correction for this specific region. Given the pronounced seasonal variations in aerosol optical properties, monthly aerosol models were developed. The monthly aerosol model is derived using the average values of aerosol microphysical properties. Compared to the standard aerosol model, this model is more effective in characterizing the absorption and scattering characteristics of aerosols in the study area. Corresponding lookup tables for the aerosol model were created and integrated into the NIR-SWIR atmospheric correction algorithm. According to the accuracy evaluation indexes of RMSD, MAE, and UPD, it can be found that the atmospheric correction results of the aerosol model established in this paper are better than those of the standard aerosol model, especially in the 547 nm band. It demonstrates that the new aerosol model outperforms the standard model in atmospheric correction performance. With the increasing availability of aerosol observational data, the aerosol model is expected to become more accurate and applicable to other satellite missions.

Influence of Magnesium Doping Concentrations and annealing on the Transmittance and Energy Band-gap of Sb2S3 Thin Films Deposited via Chemical Bath Deposition Technique

The incorporation of thin film materials into a wide range of technological applications has attracted considerable interest owing to their distinct properties and versatile functionalities. In this study, Magnesium alloyed and Antimony sulphide (Sb2S3) thin films were successfully deposited on glass substrates by chemical bath deposition technique. The films were grown at room temperature of constant pH. The concentrations of magnesium varied between 0.1M and 0.3M. The films were annealed at annealing temperature between 100˚C and 300˚C at a fixed annealing time of 1 hour. The films were characterized using UV-spectrophotometer to investigate the variation of optical and solid state properties with wavelength in the UV-VIS-NIR region. The result showed that the presence of the alloying agent and annealing treatments modified the optical and solid state properties of the films significantly. The transmittance of the films was high. Annealing led to reduced transmittance due to increased crystallite size, notably in films doped with 0.1M Mg2+ ions and annealed at 200˚C, suggesting enhanced photon absorption. The energy band gaps were found to be direct and in the range of 1.25 eV to 1.72 eV for the as grown films and 1.15eV to 1.3eV for the films annealed at annealing temperatures 300˚C. The study identifies a direct correlation between magnesium doping concentration, annealing conditions, and shifts in the energy band-gap of the films. The values of the energy band gaps are all within the range suitable for use of the layers as absorbers in hetero-junction solar cell devices for sustainable energy applications.

New aspects of femtosecond laser ablation of Si in water: a material perspective

We report a study of the role of material’s conductivity in determining the morphology of nanoparticles and nanostructures produced by ultrafast laser ablation of solids. Nanoparticles and textured surfaces formed by laser ablation display a wide variation in size and morphology depending on the material. In general, these qualities can be grouped as to material type, insulator, semiconductor, or metal; although each has many other different material properties that make it difficult to identify the critical material factor. In this report, we study these nanoparticle/surface structural characteristics as a function of silicon (Si) resistivity, thus honing-in on this critical parameter and its effects. The results show variations in morphology, optical, and nonlinear properties of Si nanoparticles. The yield of colloidal Si nanoparticles increased with an increase in the conductivity of Si. Laser-induced periodic surface structures formed on ablated substrates are also found to be sensitive to the initial conductivity of the material. Further, the laser ablation of Gamma-irradiated Si has been investigated to verify the influence of altered conductivity on the formation of Si nanoparticles. These observations are interpreted using the basic mechanisms of the laser ablation process in a liquid and its intricate relation with the initial density of states and thermal conductivities of the target material.

Variations in optical properties of water- and methanol-soluble organic carbon in PM2.5 in Tianjin and Handan over the Wintertime of 2018–2020

The impact of the Three-year Action Plan for winning the “blue sky defense battle” on the pollution levels and chemical characteristics of fine particulate matter has been intensively studied over the past few years. However, the effect of air pollution control on light absorption of brown carbon remains unclear. In this study, the light absorption and fluorescence properties of water- and methanol-soluble organic carbon (WSOC and MSOC) in PM2.5 in Tianjin and Handan in North China Plain were measured and evaluated for three consecutive winters during the Three-year Blue-Sky Action (2018–2020). Overall, the WSOC and MSOC mass concentrations and light absorption coefficients of WSOC and MSOC at 365 nm generally decreased from 2018 to 2020, indicating that the emission of solvent-soluble organic carbon has been effectively controlled with the implementation of pollution abatement measures, such as the enforcement of clean energy policies. The light absorption coefficient and mass absorption efficiency at 365 nm of MSOC were 1.41–3.82 and 1.13–1.72 times higher than that of WSOC, respectively. Fluorescent spectra coupled with parallel factor analysis indicated that less‑/highly‑oxygenated humic-like (LO-/HO-HULIS) and non-N aromatic species (non-Nas) were the major fluorophores in both WSOC and MSOC in the two cities, with LO-HULIS and HO-HULIS as two major contributors to WSOC light absorption, while both HULIS and non-Nas fluorophores had a strong correlation with MSOC light absorption. Correlation analysis with source tracers and fluorescent indices indicated that the influence of combustion emissions remains significant, and secondary formation made a non-negligible contribution to the light absorption and fluorescent components of WSOC and MSOC in both cities. This work will contribute to a better understanding of the evolution of concentration levels and optical properties of WSOC and MSOC during pollution abatement and will inform the subsequent development of measures to achieve a win-win situation for both air quality and climate change.

PbS QDs and rGO-decorated PbS QDs induced optical properties variations on P3HT:PC61BM composite thin films

PbS QDs and PbS QDs decorated with reduced graphene (rGO) are prepared by hot-injection method using PbO and hexamethyldisilathiane (HMDS) as Pb and S sources, respectively. PbS QDs and PbS QDs:rGO are used as an addition to poly(3-hexylthiophene-2,5-diyl):phenyl-C61-butyric acid methyl ester (P3HT:PC61BM) composite. The effect of their addition on the morphological, topographical and optical properties of spin-coated P3HT:PC61BM thin films are investigated. These additions tune the films to be more homogenous and more flatness as investigated in terms of field scanning electron microscope. The topographical properties of the films are explored by atomic force microscope. The results show decreasing in the grain size and the surface roughness in P3HT:PbSQDs:PC61BM film compared to other composites films. The optical properties of the films are studied over the spectral range 200–2500 nm. On one hand, the absorption coefficient of different films is computed and the optical band gap of the films is found to decrease after addition of PbS QDs and PbS QDs:rGO. On the other hand, the refractive index of the films is explained according to the single-oscillator model to get the dispersion parameters. In addition, the lattice dielectric constant and the ratio of the free-carriers concertation to their effective mass are evaluated.

Treatment planning for photodynamic therapy of abscess cavities using patient-specific optical properties measured prior to illumination

Photodynamic therapy (PDT) is an effective antimicrobial therapy that we used to treat human abscess cavities in a Phase 1 clinical trial. This trial included pre-PDT measurements of abscess optical properties, which affect light dose (light fluence) at the abscess wall and PDT response. This study simulated PDT treatment planning for 13 subjects that received optical spectroscopy prior to clinical PDT, to determine the impact of measured optical properties on ability to achieve fluence rate targets in 95% of the abscess wall. Retrospective treatment plans were evaluated for 3 conditions: (1) clinically delivered laser power and assumed, homogeneous optical properties, (2) clinically delivered laser power and measured, homogeneous optical properties, and (3) with patient-specific treatment planning using measured, homogeneous optical properties. Treatment plans modified delivered laser power, intra-cavity Intralipid (scatterer) concentration, and laser fiber type. Using flat-cleaved laser fibers, the proportion of subjects achieving 95% abscess wall coverage decreased significantly relative to assumed optical properties when using measured values for 4 mW cm−2 (92% versus 38%, p = 0.01) and 20 mW cm−2 (62% versus 15%, p = 0.04) thresholds. When measured optical properties were incorporated into treatment planning, the 4 mW cm−2 target was achieved for all cases. After treatment planning, optimal Intralipid concentration across subjects was 0.14 ± 0.09%, whereas 1% was used clinically. Required laser power to achieve the 4 mW cm−2 target was significantly correlated with measured abscess wall absorption (ρ = 0.7, p = 0.008), but not abscess surface area (ρ = 0.2, p = 0.53). When using spherical diffuser fibers for illumination, both optimal Intralipid concentration (p = 0.0005) and required laser power (p = 0.0002) decreased compared to flat cleaved fibers. At 0% Intralipid concentration, the 4 mW cm−2 target could only be achieved for 69% of subjects for flat-cleaved fibers, compared to 100% for spherical diffusers. Based on large inter-subject variations in optical properties, individualized treatment planning is essential for abscess photodynamic therapy. (Clinical Trial Registration: The parent clinical trial from which these data were acquired is registered on ClinicalTrials.gov as ‘Safety and Feasibility Study of Methylene Blue Photodynamic Therapy to Sterilize Deep Tissue Abscess Cavities,’ with ClinicalTrials.gov identifier NCT02240498).

Unraveling the Complex Interactions: Machine Learning Approaches to Predict Bacterial Survival against ZnO and Lanthanum-Doped ZnO Nanoparticles.

The rise in antibiotic-resistant bacteria is a global health challenge. Due to their unique properties, metal oxide nanoparticles show promise in addressing this issue. However, optimizing these properties requires a deep understanding of complex interactions. This study incorporated data-driven machine learning to predict bacterial survival against lanthanum-doped ZnO nanoparticles. The effect of incorporation of lanthanum ions on ZnO was analyzed. Even with high lanthanum concentration, no significant variations in structural, morphological, and optical properties were observed. The antibacterial activity of La-doped ZnO nanoparticles against Gram-positive and Gram-negative bacteria was qualitatively and quantitatively evaluated. Nanoparticles induce 60%, 95%, and 55% bacterial death against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus, respectively. Algorithms such as Multilayer Perceptron, K-Nearest Neighbors, Gradient Boosting, and Extremely Random Trees were used to predict the bacterial survival percentage. Extremely Random Trees performed the best among these models with 95.08% accuracy. A feature relevance analysis extracted the most significant attributes to predict the bacterial survival percentage. Lanthanum content and particle size were irrelevant, despite what can be assumed. This approach offers a promising avenue for developing effective and tailored strategies to reduce the time and cost of developing antimicrobial nanoparticles.

Integrating satellite and model data to explore spatial-temporal changes in aerosol optical properties and their meteorological relationships in northwest India

This study aims to analyze the temporal and spatial distribution of Aerosol Optical Properties across Northwest India using aerosol data from MODIS (Moderate Resolution Imaging Spectroradiometer) and OMI (Ozone Monitoring Instrument) sensors from 2003 to 2022. Therefore, this study investigated the decadal, interannual, and seasonal changes in aerosol optical properties, vegetation index, and meteorological parameters in the northwest Indian region (8 boxes). Using GIOVANNI (Goddard Earth Sciences Data and Information Services Center (GES DISC) Online Visualization and Analysis Infrastructure), we retrieved daily and monthly Aqua and Terra MODIS products of aerosol optical depth (AOD), Angstrom exponent (AE), normalized difference vegetation index (NDVI), and OMI aerosol index (AI) to examine the spatiotemporal variations by using statistical approaches. The results demonstrated that the decadal averages of aerosol properties showed values of AOD 0.35 (Aqua) and 0.34 (Terra) and AE 1.20 (Aqua) and 1.10 (Terra) with the highest levels during the post-monsoon. Notably, the mean interannual concentrations of AOD and NDVI consistently surpass 0.3, and AE and AI exceed 1 in most locations, underscoring the persistence of high aerosol loading. Also, the study revealed a negative decadal change in AOD of about −8.24 %, while AE, AI, and NDVI showed positive decadal changes of about 9.24 %, 15.09 %, and 12.67 %, respectively. In addition, aerosol optical properties and local meteorology strongly correlated (−0.8 to +0.8). Principal Component Analysis (PCA) identifies meteorological parameters as significant drivers, with the first three components explaining over 70 % of the variation in aerosol optical properties. The NOAA HYSPLIT trajectory model suggests that the long-distance dust transport from the Arabian Peninsula frequently penetrates Gujarat province and then to northwest India. The results contributed to air quality management strategies and provided valuable insights into regional climate and air quality with the influence of meteorology.

Validation of satellite-derived water-leaving reflectance in contrasted French coastal waters based on HYPERNETS field measurements

Since 2021, two autonomous HYPERNETS (A new hyperspectral radiometer integrated in automated networks of water and land bidirectional reflectance measurements for satellite validation) stations are operated in contrasted French coastal waters: one in the center of an optically complex coastal lagoon and one at the mouth of a highly turbid estuary. These stations perform predefined sequences of above-water hyperspectral radiometric measurements following a strict viewing geometry. The data recorded by the ®HYPSTAR radiometer is automatically transmitted to servers for quality-controls then computation of the water-leaving reflectance signal. Numerous matchups were identified with high (Sentinel2-MSI and Landsat8/9-OLI) and medium (Sentinel3-OLCI and Aqua-MODIS) spatial resolution satellite data and are analyzed to assess the performance of different atmospheric correction algorithms (Sen2Cor, ACOLITE, POLYMER, iCOR, C2RCC, GRS, BPAC, NIR-SWIR). Considering the specifications of each site (i.e., spatial and temporal variations of water optical properties), optimized matchup protocols are first established to guaranty high quality comparisons between satellite products and field measurements. The matchup results highlight the failure and limits of several atmospheric correction algorithms in complex/turbid coastal waters. The importance of accurate sun glint corrections in low to moderately-turbid waters (with the good performances of POLYMER, C2RCC and GRS processors, e.g., errors (MAPE) lower than 25% in the green spectral region) is also shown while the use of dark targets and spectral fitting to estimate the aerosol contributions is proved to be the most accurate method in the case of turbid waters (with Sen2Cor and ACOLITE errors (MAPE) lower than 20% in the visible and near-infrared spectral regions).