Variation In Bite Force Research Articles

Cranial muscle architecture in wild boar: Does captivity drive ontogenetic trajectories?

The jaw system in mammals is complex and different muscle morphotypes have been documented. Pigs are an interesting group of animals as they are omnivorous and have a bunodont crushing dentition. Moreover, they have interacted with humans for over 10,000 years and grow nearly two orders of magnitude in size. Despite being a model system for studies on cranial form and function, data on the growth of the jaw adductor muscles are scant. Moreover, whether captivity impacts the growth and architecture of the jaw adductors remains unknown. Based on dissection data of the jaw adductors of 45 animals ranging from less than 1 kg to almost 100 kg, we show that muscle masses, muscle fiber lengths, and cross-sectional areas scale as predicted for geometrically similar systems or with slight negative allometry. Only the fiber length of the lateral pterygoid muscle grew with slight positive allometry. Animals raised in captivity in stalls or in an enclosure were overall very similar to wild animals. However, some muscles were larger in captive animals. Interestingly, variation in bite force in captive animals was well predicted by the variation in the size of the superficial masseter muscle relative to the overall jaw adductor mass.

Bite force in the strictly subterranean rodent family of African mole‐rats (Bathyergidae): The role of digging mode, social organization and ecology

AbstractBite force is an ecologically relevant performance trait that has been measured to better understand the adaptations to diet and habitat use. Moreover, bite force is relevant in understanding reproductive success, as well as inter‐ and intraspecific competition.African mole‐rats (Bathyergidae, Rodentia) are a unique clade of mammals that use different digging strategies, show different types of social organization and occur in ecologically diverse savanna habitats in sub‐Saharan Africa. Whereas previous studies have suggested these animals have exceptionally high bite forces, the ecological and other proximate and ultimate drivers of variation in bite force in the group remain unstudied.In the present study we measured in vivo bite force of 394 adult specimens from 10 African mole‐rat species including all genera within the family.Our results show that in African mole‐rats digging mode is a major driver of variation in bite force, with chisel‐tooth diggers being stronger biters than scratch diggers. Moreover, species living in habitats characterized by low and irregular precipitation patterns and in soils with a high content of coarse particles have a higher bite force than species occupying habitats with a regular rainfall pattern and fine soil types.This suggests that bite force in bathyergids has evolved in concert with rainfall and soil characteristics of different savanna habitats, which have contributed to the successful radiation of these subterranean mammals across sub‐Saharan Africa.Read the freePlain Language Summaryfor this article on the Journal blog.

Sagittal crest morphology decoupled from relative bite performance in Pleistocene tapirs (Perissodactyla: Tapiridae).

Bite force is often associated with specific morphological features, such as sagittal crests. The presence of a pronounced sagittal crest in some tapirs (Perissodactyla: Tapiridae) was recently shown to be negatively correlated with hard-object feeding, in contrast with similar cranial structures in carnivorans. The aim of this study was to investigate bite forces and sagittal crest heights across a wide range of modern and extinct tapirs and apply a comparative investigation to establish whether these features are correlated across a broad phylogenetic scope. We examined a sample of 71 specimens representing 15 tapir species (5 extant, 10 extinct) using the dry-skull method, linear measurements of cranial features, phylogenetic reconstruction, and comparative analyses. Tapirs were found to exhibit variation in bite force and sagittal crest height across their phylogeny and between different biogeographical realms, with high-crested morphologies occurring mostly in Neotropical species. The highest bite forces within tapirs appear to be driven by estimates for the masseter-pterygoid muscle complex, rather than predicted forces for the temporalis muscle. Our results demonstrate that relative sagittal crest height is poorly correlated with relative cranial bite force, suggesting high force application is not a driver for pronounced sagittal crests in this sample. The divergent biomechanical capabilities of different contemporaneous tapirids may have allowed multiple species to occupy overlapping territories and partition resources to avoid excess competition. Bite forces in tapirs peak in Pleistocene species, independent of body size, suggesting possible dietary shifts as a potential result of climatic changes during this epoch.

The relationship between head shape, head musculature and bite force in caecilians (Amphibia: Gymnophiona).

Caecilians are enigmatic limbless amphibians that, with a few exceptions, all have an at least partly burrowing lifestyle. Although it has been suggested that caecilian evolution resulted in sturdy and compact skulls as an adaptation to their head-first burrowing habits, no relationship between skull shape and burrowing performance has been demonstrated to date. However, the unique dual jaw-closing mechanism and the osteological variability of their temporal region suggest a potential relationship between skull shape and feeding mechanics. Here, we explored the relationships between skull shape, head musculature and in vivo bite forces. Although there is a correlation between bite force and external head shape, no relationship between bite force and skull shape could be detected. Whereas our data suggest that muscles are the principal drivers of variation in bite force, the shape of the skull is constrained by factors other than demands for bite force generation. However, a strong covariation between the cranium and mandible exists. Moreover, both cranium and mandible shape covary with jaw muscle architecture. Caecilians show a gradient between species with a long retroarticular process associated with a large and pennate-fibered m. interhyoideus posterior and species with a short process but long and parallel-fibered jaw adductors. Our results demonstrate the complexity of the relationship between form and function of this jaw system. Further studies that focus on factors such as gape distance or jaw velocity will be needed in order to fully understand the evolution of feeding mechanics in caecilians.

Proximate and ultimate drivers of variation in bite force in the insular lizardsPodarcis melisellensisandPodarcis sicula

AbstractBite force is a key performance trait in lizards because biting is involved in many ecologically relevant tasks, including foraging, fighting and mating. Several factors have been suggested to impact bite force in lizards, such as head morphology (proximate factors), or diet, intraspecific competition and habitat characteristics (ultimate factors). However, these have been generally investigated separately and mostly at the interspecific level. Here we tested which factors drive variation in bite force at the population level and to what extent. Our study includes 20 populations of two closely related lacertid species, Podarcis melisellensis and Podarcis sicula, which inhabit islands in the Adriatic. We found that lizards with more forceful bites have relatively wider and taller heads, and consume more hard prey and plant material. Island isolation correlates with bite force, probably by driving resource availability. Bite force is only poorly explained by proxies of intraspecific competition. The linear distance from a large island and the proportion of difficult-to-reduce food items consumed are the ultimate factors that explain most of the variation in bite force. Our findings suggest that the way in which morphological variation affects bite force is species-specific, probably reflecting the different selective pressures operating on the two species.

Correlation of skull morphology and bite force in a bird-eating bat (Ia io; Vespertilionidae)

BackgroundGenetic and ecological factors influence morphology, and morphology is compatible with function. The morphology and bite performance of skulls of bats show a number of characteristic feeding adaptations. The great evening bat, Ia io (Thomas, 1902), eats both insects and birds (Thabah et al. J Mammal 88: 728-735, 2007), and as such, it is considered to represent a case of dietary niche expansion from insects to birds. How the skull morphology or bite force in I. io are related to the expanded diet (that is, birds) remains unknown. We used three-dimensional (3D) geometry of the skulls and measurements of bite force and diets from I. io and 13 other species of sympatric or closely related bat species to investigate the characteristics and the correlation of skull morphology and bite force to diets.ResultsSignificant differences in skull morphology and bite force among species and diets were observed in this study. Similar to the carnivorous bats, bird-eaters (I. io) differed significantly from insectivorous bats; I. io had a larger skull size, taller crania, wider zygomatic arches, shorter but robust mandibles, and larger bite force than the insectivores. The skull morphology of bats was significantly associated with bite force whether controlling for phylogeny or not, but no significant correlations were found between diets and the skulls, or between diets and residual bite force, after controlling for phylogeny.ConclusionsThese results indicated that skull morphology was independent of diet, and phylogeny had a greater impact on skull morphology than diet in these species. The changes in skull size and morphology have led to variation in bite force, and finally different bat species feeding on different foods. In conclusion, I. io has a larger skull size, robust mandibles, shortened dentitions, longer coronoid processes, expanded angular processes, low condyles, and taller cranial sagittal crests, and wider zygomatic arches that provide this species with mechanical advantages; their greater bite force may help them use larger and hard-bodied birds as a dietary component.

The bite force-gape relationship as an avenue of biomechanical adaptation to trophic niche in two salmonid fishes.

All skeletal muscles produce their largest forces at a single optimal length, losing force when stretched or shortened. In vertebrate feeding systems, this fundamental force-length relationship translates to variation in bite force across gape, which affects the food types that can be eaten effectively. We measured the bite force-gape curves of two sympatric species: king salmon (Oncorhynchus tshawytscha) and pink salmon (Oncorhynchusgorbuscha). Cranial anatomical measurements were not significantly different between species; however, peak bite forces were produced at significantly different gapes. Maximum bite force was achieved at 67% of maximum gape for king salmon and 43% of maximum gape for pink salmon. This may allow king salmon to use greater force when eating large or elusive prey. In contrast, pink salmon do not require high forces at extreme gapes for filter feeding. Our results illustrate that the bite force-gape relationship is an important ecophysiological axis of variation.

Comparison of head size and bite force in two sister species of parrotbills

BackgroundBrain size is associated with morphological evolution and behavioral flexibility because animals with large brain size tend to utilize new resources and colonize novel environments more successfully. Therefore, animals with larger brain size should possess larger distribution ranges. Brain size is strongly positively correlated with head size in birds, but also with prey size and vocalizations, because individuals with large heads eat large food items and produce high frequency calls.MethodsTo test if there exists an association between head morphology and bite performance, we compared head size and bite force in two sympatric sister species of parrotbills, Ashy-throated Parrotbill (Paradoxornis alphonsianus) and Vinous-throated Parrotbill (P. webbianus), which both originated from the Himalayan area, but differ significantly in their distribution ranges.ResultsIn Guizhou, southwestern China, the Ashy-throated Parrotbill with a restricted distribution range had smaller heads whilst the Vinous-throated Parrotbill with a large distribution range had larger heads. However, there were no differences in head size between Ashy-throated Parrotbills and allopatric populations of Vinous-throated Parrotbills (Jiangxi and Hebei). Furthermore, the tendency of variation in bite force was opposite to that in head size with populations with larger head size having weaker bite force.ConclusionsWe showed that there are no differences in head size between the Ashy-throated Parrotbill and allopatric populations of Vinous-throated Parrotbill, which provides evidence for the hypothesis that differences in head size in the Guizhou populations of two sister species are probably the result of local adaptation rather than species-specific. Our study has implications for avian dispersal and adaption related to head size such as diet ecology and vocalizations.

Drivers of in vivo bite performance in wild brown mouse lemurs and a comparison with the grey mouse lemur

AbstractPhysical performance is crucial for animal survival and fitness. In this context, greater bite forces can provide advantages and may allow an individual to gain access to reproductive partners and/or different food resources. Here, we explored the determinants of bite force in a wild population of the brown mouse lemur (Microcebus rufus). Our objectives were to elucidate (1) if sex, head width, heart rate (as an indicator of overall physical fitness) and body condition drive variation in bite force in this population of wild mouse lemurs; and (2) the relative importance of the ecological niche in determining bite force by comparing results from this wild population with previously published results on bite force, body mass and head width from a laboratory colony of the grey mouse lemur (Microcebus murinus). We captured 32 wild brown mouse lemurs at night in the Ranomafana National Park in Madagascar during the beginning of the rainy season from 1st to 31st October 2016. We measured bite force, heart rate, body mass and head width of all individuals, and assigned sex and body condition (estimated as the unstandardized residual of a regression of body mass against head size). Although maximum bite force was positively correlated with body mass, it was not correlated with body condition. Residual bite force was highly correlated with residual head width and heart rate. The mean bite force of wild brown mouse lemurs was much lower than that of grey mouse lemurs in captivity, but showed similar relationships to head dimension and body mass. Even when corrected by body condition, grey mouse lemurs bit significantly harder than brown mouse lemurs. The difference in bite force between species could be explained by differences in head size and niche divergence with brown mouse lemurs eating mostly soft fruits and grey mouse lemurs eating more hard insects.

Effect of Different Splint Thicknesses on Occlusal Function and Temporomandibular Joint Sounds: A Clinical Report

Background: Occlusal splint therapy, which is a conservative approach to treat temporomandibular disorders (TMDs) and bruxism, can change the occlusal contact of dentition. However, little is known about the variation in bite force and temporomandibular joint (TMJ) sounds. The objective of this case report is to compare the effects of different splint thicknesses constructed by vacuum lamination technology on occlusal function and TMJ sounds. Clinical Presentation: This study presents a 24-year-old male with bruxism. Four splints of different thicknesses (0.6 mm, 1 mm, 2.5 mm and 3 mm) were fabricated and tested. Then, an array of occlusal data were recorded and analyzed by the T-Scan®III system and joint vibration analysis (JVA). Conclusion: The results reveal that splints of different thicknesses manufactured by the vacuum hot-lamination apparatus may cause a change in occlusal force.

Ontogeny of bite force in a validated biomechanical model of the American alligator.

Three-dimensional computational modeling offers tools with which to investigate forces experienced by the skull during feeding and other behaviors. American alligators (Alligator mississippiensis) generate some of the highest measured bite forces among extant tetrapods. A concomitant increase in bite force accompanies ontogenetic increases in body mass, which has been linked with dietary changes as animals increase in size. Because the flattened skull of crocodylians has substantial mediolaterally oriented muscles, crocodylians are an excellent model taxon in which to explore the role of mediolateral force components experienced by the feeding apparatus. Many previous modeling studies of archosaur cranial function focused on planar analysis, ignoring the mediolateral aspects of cranial forces. Here, we used three-dimensionally accurate anatomical data to resolve 3D muscle forces. Using dissection, imaging and computational techniques, we developed lever and finite element models of an ontogenetic series of alligators to test the effects of size and shape on cranial loading and compared estimated bite forces with those previously measured in vivo in A. mississippiensis We found that modeled forces matched in vivo data well for intermediately sized individuals, and somewhat overestimated force in smaller specimens and underestimated force in larger specimens, suggesting that ontogenetically static muscular parameters and bony attachment sites alone cannot account for all the variation in bite force. Adding aponeurotic muscle attachments would likely improve force predictions, but such data are challenging to model and integrate into analyses of extant taxa and are generally unpreserved in fossils. We conclude that anatomically accurate modeling of muscles can be coupled with finite element and lever analyses to produce reliable, reasonably accurate estimate bite forces and thus both skeletal and joint loading, with known sources of error, which can be applied to extinct taxa.

Extreme Postnatal Scaling in Bat Feeding Performance: A View of Ecomorphology from Ontogenetic and Macroevolutionary Perspectives.

Ecomorphology studies focus on understanding how anatomical and behavioral diversity result in differences in performance, ecology, and fitness. In mammals, the determinate growth of the skeleton entails that bite performance should change throughout ontogeny until the feeding apparatus attains its adult size and morphology. Then, interspecific differences in adult phenotypes are expected to drive food resource partitioning and patterns of lineage diversification. However, Formal tests of these predictions are lacking for the majority of mammal groups, and thus our understanding of mammalian ecomorphology remains incomplete. By focusing on a fundamental measure of feeding performance, bite force, and capitalizing on the extraordinary morphological and dietary diversity of bats, we discuss how the intersection of ontogenetic and macroevolutionary changes in feeding performance may impact ecological diversity in these mammals. We integrate data on cranial morphology and bite force gathered through longitudinal studies of captive animals and comparative studies of free-ranging individuals. We demonstrate that ontogenetic trajectories and evolutionary changes in bite force are highly dependent on changes in body and head size, and that bats exhibit dramatic, allometric increases in bite force during ontogeny. Interspecific variation in bite force is highly dependent on differences in cranial morphology and function, highlighting selection for ecological specialization. While more research is needed to determine how ontogenetic changes in size and bite force specifically impact food resource use and fitness in bats, interspecific diversity in cranial morphology and bite performance seem to closely match functional differences in diet. Altogether, these results suggest direct ecomorphological relationships at ontogenetic and macroevolutionary scales in bats.

Proximate determinants of bite force in Anolis lizards.

Performance measures associated with the vertebrate jaw system may provide important insights into vertebrate ecology and evolution because of their importance in many ecologically relevant tasks. Previous studies have shown that in many taxa, evolution toward higher bite force has gone hand in hand with the evolution of larger body size. However, independent of differences in overall body size, bite force may vary depending on head size and shape as well. Moreover, the underlying musculature may also drive variation in bite force. Here, we investigate the proximate determinants of bite force in lizards of the genus Anolis. We dissected the jaw muscles and quantified muscle mass, fibre length, and cross-sectional area. Data were analysed for both sexes independently given the sexual dimorphism detected in the dataset. Our results show that the traits that explain bite force are similar in both males and females with overall body size and muscle mass being the principal determinants. Among the different muscles examined, the adductor externus and the pseudotemporalis groups were the best determinants of bite force. However, models run for males predicted the variation in bite force better than models for females, suggesting that selection on morphology improving bite force may be stronger in males.

Quantifying the effect of gape and morphology on bite force: biomechanical modelling and in vivo measurements in bats

Summary Maximum bite force is an important metric of feeding performance that defines the dietary ecology of many vertebrates. In mammals, theoretical analyses and empirical studies suggest a trade‐off between maximum bite force and gape at behavioural and evolutionary scales; in vivo bite force is expected to decrease at wide gapes, and cranial morphologies that enable high mechanical advantage are thought to have a lower ability to generate high bite forces at wide gapes, and vice versa. However, very few studies have confirmed these relationships in free‐ranging mammals. This study uses an ecologically diverse sample of bats to document the variation in bite force with respect to gape angle, and applies three‐dimensional models of the feeding apparatus to identify the major morphological and biomechanical predictors of the gape‐bite force relationship. In vivo and model data corroborated that bite force decreases significantly at wide gapes across species, but there is substantial intraspecific variation in the data obtained from live bats. Results from biomechanical models, analysed within a phylogenetic framework, revealed that species with larger temporalis muscles, higher temporalis stretch factors and high mechanical advantages experience a steeper reduction in bite force with increasing gape. These trends are illustrated by short‐faced durophagous frugivores. The results from this study suggest that gape‐mediated changes in bite force can be explained both by behavioural effects and cranial morphology, and that these links are relevant for functional analyses of mammal dietary ecology.

Beyond size – morphological predictors of bite force in a diverse insectivorous bat assemblage from Malaysia

Summary Bite force is used to investigate feeding performance in a variety of vertebrates. In all taxa studied, bite force is strongly correlated with body and head size. Studies of bite force in bats have largely centred on neotropical species with a particular focus on species that maximize dietary differences. Little is known about the bite force of bats from the Old World tropics, nor of variation in bite force within diverse assemblages of obligate insectivores. Moreover, factors other than size are poorly known but may be important in driving interspecific differences in bite force, and thereby diet. Here, we examine the correlation between morphological variation and bite force of 35 species of insectivorous bats from a single palaeotropical assemblage. We confirmed the overall relationship between size and bite force across species, but found that bite force is predicted more strongly by head length than body mass or forearm length. From the combined action of jaw muscles and muscle‐bone mechanisms, bats generate a mechanical advantage that creates pressure during biting. We calculated the size‐independent mechanical advantage for each of five mandible lever systems (three delineated by the temporalis muscle and two delineated by the masseter muscle) operating through three function points (molar, canine and incisor). Size‐independent mechanical advantage of the suprazygomatic portion of the temporalis muscle at the molar function point was the only significant predictor of size‐independent maximum bite force across all species. Within families, the size‐independent mechanical advantage of the superficial portion of the masseter muscle plays a significant role in predicting size‐independent maximum bite force in both the Rhinolophidae and Vespertilionidae. For the family Hipposideridae, however, size‐independent mechanical advantage showed no role in predicting size‐independent maximum bite force, suggesting that size really matters in predicting the maximum bite force capacity for this family.

Proximate determinants of bite force capacity in the mouse lemur

AbstractBoth mating system and diet are thought to drive inter‐individual variation in bite force. Although previously published data suggest that bite force variation may be driven by variation in morphology (e.g. head morphology, body size, muscle size), age and physiology (e.g. fluctuating plasma testosterone levels) in some vertebrates, this remains untested in primates. Here, we explore the proximal determinants of bite force capacity in the grey mouse lemur Microcebus murinus. Our results show that in male grey mouse lemurs, bite force measurements are repeatable across a 1‐month period. Yet, bite forces were independent of fluctuation plasma testosterone levels. Head dimensions and body mass were all positively correlated with bite force. Among these, head width was the best predictor of bite force as has been observed for other vertebrates. Unexpectedly, age was highly significantly and positively correlated with bite force. Whereas older animals generally bit harder, the oldest age group (5.5 years) showed a decline in bite force capacity. These results suggest that bite force in the grey mouse lemur is mostly determined by morphology and age, yet is independent of variation in testosterone. Future studies including a broader age range and animals of different sexes would be of interest to better understand the variation in bite force in this small lemur.

Sex-specific evolution of bite performance in Liolaemus lizards (Iguania: Liolaemidae): the battle of the sexes

461..475 Although differential selective pressures on males and females of the same species may result in sex-specific evolutionary trajectories, comparative studies of adaptive radiations have largely neglected within-species varia- tion. In this study, we explore the potential effects of natural selection, sexual selection, or a combination of both, on bite performance in males and females of 19 species of Liolaemus lizards. More specifically, we study the evolution of bite performance, and compare evolutionary relationships between the variation in head morphology, bite performance, ecological variation and sexual dimorphism between males and females. Our results suggest that in male Liolaemus, the variation in bite force is at least partly explained by the variation in the degree of sexual dimorphism in head width (i.e. our estimate of the intensity of sexual selection), and neither bite force nor the morphological variables were correlated with diet (i.e. our proxy for natural selection). On the contrary, in females, the variation in bite force and head size can, to a certain extent, be explained by variation in diet. These results suggest that whereas in males, sexual selection seems to be operating on bite performance, in the case of females, natural selection seems to be the most likely and most important selective pressure driving the variation in head size. © 2010 The Linnean Society of London, Biological Journal of the Linnean Society, 2010, 101, 461-475. ADDITIONAL KEYWORDS: diet - ecomorphology - interspecific variation - natural selection - sexual differences - sexual selection.

Simple predictors of bite force in bats: the good, the better and the better still

Bite forces of 39 species from six families of New World bats with a variety of diets are quantified with a force meter under field conditions. Using regression approaches we search for a model that is a good morphological predictor of these bite forces. Body mass, an index that ignores differences in skull morphology, has a statistically significant relationship with bite force (R 2 = 0.76) but is a relatively poor predictor compared with our best model (R 2 = 0.94). The two best models of the eight we examine are one based on an estimate of strength of dentary, which is really simple beam theory; and the other based on muscle mass and jaw mechanics of input and output arms. Both models explain about 90% of the variation in bite force. However, the combination of these variables together in multiple regression works even better, explaining about 94% of the variation. Our model derived from beam theory relies on bony characteristics, which are readily available from museum specimens. This model will be of particular use to students of fossils or ecomorphology for inferring bite force. We also test Freeman’s earlier predictions about bite forces of bats with gracile versus robust skulls. These predictions can be only partially confirmed. For species we measured, bats with gracile skulls did have weak bites; however, bats designated by Freeman as having robust skulls did not have particularly strong bites.

Morphological correlates of bite force and diet in the skull and mandible of phyllostomid bats

Summary Bite force is an important performance measure for vertebrate and is related to a variety of ecological challenges. Phyllostomid bats present highly diversified feeding habits associated with extensive cranial shape divergence. Biomechanical models predict that the cranial shape changes are linked to dietary variation through bite force. However, the relationship of cranial shape, diet and bite force had not been explicitly tested before. Here we use a combination of geometric morphometric techniques and comparative methods to test for morphological correlates of bite force and diet in 14 phyllostomid bat species. Skull and mandible shape variation were assessed by vectors, derived from a two‐block partial least squares analysis of geometric shape and size‐independent bite forces. The relationship between bite force, skull shape and diet was assessed by phylogenetic generalized least square regressions. Most variation in the bite force data examined here (approximately 74%) was explained by size variation alone, but the shape vectors for both skull and mandible explained a significant part of the residual variation in bite force (83% and 56%, respectively), as did the dietary differences (56%). Although the first principal component of diet variation is associated with a negative correlation between insectivory and frugivory, residual bite force and cranial shape are not associated with this diet contrast. Shape and residual bite force variation in the sample were strongly associated with the second diet component, depicting an increase in nectarivory. Species with stronger bites (insectivorous and frugivorous) than expected for their sizes presented a shorter rostrum and mandible, higher skulls, and more developed muscle attachment areas. On the other hand, the characteristic cranial elongation of nectarivorous species (supporting the long tongue) is a trade‐off with bite force. These morphological correlates of bite force are similar to those observed in carnivores and non‐herbivorous marsupials, and can be related to morphological characters used in biomechanical models for bite force prediction. Our results reinforce the effectiveness of statistically integrating geometric shape variables to bite force and diet information in the investigation of patterns of cranial shape change and trophic radiation in ecologically diverse vertebrate groups.

Morphological and mechanical determinants of bite force in bats: do muscles matter?

Bats are one of the most diverse groups of mammals and have radiated into a wide variety of trophic niches. Accordingly, the cranial structure in bats is unusually variable among mammals and thought to reflect specializations for feeding and echolocation. However, recent analyses of cranial structure, feeding behavior and bite force across a wide range of bats suggest that correlations between morphology and performance and/or ecology are not as clearcut as previously thought. For example, most of the variation in bite force across a wide range of phyllostomid bats was explained by differences in body size rather than specific cranial traits. However, remarkably little is known about the muscular components that are responsible for generating the actual bite forces. We have tested which aspects of the cranial muscular system are good predictors of bite force across a wide range of species using a modeling approach. Model calculations of bite force show good correspondence with in vivo data suggesting that they can be used to estimate performance of the cranial system. Moreover, our data show that bite force is strikingly well explained by differences in temporalis muscle mass, temporalis fiber length and masseter muscle mass. Moreover, our data show that evolutionary changes in bite force capacity in bats are associated with evolutionary changes in relative m. temporalis mass and absolute skull length.