The existing methods find it difficult to resolve the inconsistency in the nodal displacements of nodes at the interface of dense and sparse element models. Therefore, this paper proposes a new variable-node element model using the base force element method (BFEM) and successfully applies it to study the mechanical properties of recycled aggregate concrete (RAC). First, the variable-node element model with an arbitrary change of node number in the mid-edges was established, and the explicit expressions of the 2 × 2 nodal compliance matrix and nodal displacements were given. Subsequently, the triangular and quadrilateral elements of single-sides and double-sides of hanging element models were developed based on the variable-node element model. In addition, a double-notched model of RAC with different aggregate types but the same aggregate distribution position was established, and numerical simulations of uniaxial tension were performed. The results show that the compliance matrix and nodal displacement are independent of the element characteristic without Gaussian integration. The variable-node hanging element model has high numerical accuracy and applicability, and the nodes between the sparse and dense meshes do not require any construction measures. The variable-node elements ensure the coordination of the nodal displacement at the interfaces. The aggregate shape has a significant effect on the damage mode, maximum principal strain, principal stress distribution, and stress concentration, while has a negligible effect on RAC tensile strength when the aggregate distribution is the same.