Variation Of Flow Velocity Research Articles

Fluid responsiveness in pediatrics: an unsolved challenge

Predicting fluid responsiveness is a major challenge in the pediatric population as vascular and pulmonary compliance differ from the adults. However it is a crucial thing to avoid the harmful fluid overload. We count on different variables to identify responders being the dynamic parameters the ones with more evidence, specially the Respiratory Variation In Aortic Blood Flow Velocity based on echocardiography. Other variables rely on the arterial waveform, like Pulse Pressure Variation or Stroke Volume Variation seem to have limitations but new tests like VTC are arriving to overcome their drawbacks. We review the actual evidence regarding fluid responsiveness prediction in children and the anatomic and physiologic peculiarities of children that explain why they do not respond like adults and why we should study them in particular.

Variation of Surface Tension of Liquid Metal with Fluorides in Tungsten Inert Gas Welding

Real-time measuring and obtaining surface tension of liquid metal during the arc welding process is critical for studying the behavior of the weld pool, such as Marangoni flow and flow velocity. The dynamic variation of surface tension of weld pool during tungsten inert gas welding process with and without fluoride flux was measured by weld pool oscillation sensing system, and the effect of fluoride flux on surface tension and pool behavior was analyzed. The results show that the surface tension gradient of liquid metal can convert from a negative to a positive value in a critical arc time. The flow velocity of liquid metal and critical arc time significantly increased and decreased, respectively, with fluoride flux. The variation of surface tension, flow velocity, and critical arc time with fluoride flux was induced by arc temperature increasing.

An Experimental Study of Flow and Turbulence Properties near the Rising Sector Gate Mouth Considering the Gate Opening with a PIV Measuring System

Hydraulic structures, such as movable weir gates, are widely installed in rivers and streams for various purposes. Among these is the rising sector gate, which is the focus of this study. This research investigated how different gate openings affect flow velocity and turbulence distributions at the gate mouth. A hydraulic analysis of flow and turbulence characteristics near the mouth of a rising sector gate model was conducted through laboratory experiments with various flow conditions and gate openings utilizing a Particle Image Velocimetry (PIV) system. Experimental tests were carried out with two gate-opening angles (30 and 45 degrees). The PIV measurements revealed significant variations in flow velocity and turbulence properties in response to the gate openings and flow conditions. Notably, in the vicinity of the gate mouth, where the flow regime changes rapidly between the upstream and downstream regions, the turbulence properties in the upstream part of the gate mouth were more than twice those in the downstream part. Additionally, the streamwise distribution of depth-averaged relative turbulence intensity was analyzed. The results showed that the depth-averaged relative turbulence intensity decreased by nearly half as the gate opening increased from 30 to 45 degrees, with the lowest values observed at the gate mouth, followed by an increase downstream. A functional relationship between the maximum flow velocity at the gate mouth during underflow operation and the Froude number was established to guide practical gate operation in the field.

Synergistic effects of temporal variations in flow and chemistry on colloid retention and remobilization in saturated porous media

Rapid infiltration due to rainfall events, groundwater pumping, and artificial recharge of groundwater result in temporal variations in both flow and chemistry in the subsurface and may lead to remobilization of retained colloids, thereby re-contaminating the groundwater resources. Many researchers have studied the effects of temporal variations in water velocity and in water chemistry separately. These variations, however, almost always occur simultaneously. To the best knowledge of the authors, there are no studies reported in the literature where the effect of simultaneous temporal variations in flow velocity and ionic strength on colloid release is investigated. One cannot assume that those effects can be simply superimposed. In fact, in this study, we show that these effects are not simply additive. We have performed eight sets of saturated column experiments on the effects of temporal variations in flow velocity alone and simultaneous temporal variations in flow velocity and ionic strength on retention and remobilization of colloids. Temporal increases in average water velocity caused an instantaneous spike release of colloids in the measured breakthrough curve, with the time to peak coinciding with the instant of velocity increase. Further, the effect of temporal variations in average water velocity on remobilization of deposited colloids is ionic-strength dependent. The simultaneous temporal increases in flow and decreases in ionic strength caused a spike release of colloids followed by long tails. The release curve for every step-change in velocity and ionic strength was unimodal for deposition ionic strengths of 100 and 10 mM, with the peak coinciding with the instant of arrival of ionic strength front at the column outlet. However, the release curve was bimodal for deposition ionic strengths of 50 and 25 mM. There, the first instantaneous spike coincided with the instant of increase in flow velocity, and the second delayed one coincided with the passage of the ionic strength front. Temporal variations in both flow and ionic strength released more colloids in the effluent than when only ionic-strength or only flow velocity was varied. This is due to the combined effects of greater hydrodynamic torque exerted on attached particles together with smaller adhesive torque.

Vibration and Stability Analyses of Submarine Fluid-Conveying Pipelines with Local Stiffness Variation Under External Flow Fields

This study analyzes the vibration and stability characteristics of a submarine fluid-conveying pipeline with local variation in stiffness under the influence of external flow fields. Utilizing the absolute nodal coordinate formulation (ANCF), the dynamic equation for the submarine pipeline with local stiffness variation under arbitrary boundary conditions is derived. Through numerical solutions, curves depicting complex frequency variations as a function of the internal flow velocity of the pipeline system are obtained. Additionally, the effects of external flow velocity, geometrical parameters, and local stiffness variation on the vibration and stability characteristics of the submarine pipeline under three different boundary conditions are investigated. Results indicate that the stability of the pipeline system decreases across the three boundary conditions under the influence of the external flow field. Increased external flow velocities lead to further reductions in system stability. Furthermore, as the length-to-diameter ratio increases and the thickness-to-diameter ratio decreases, the first three orders of frequencies of the pipeline gradually diminish. Enhancing local stiffness contributes to improving the stability of the system, whereas reducing local stiffness has the opposite effect.

Synchronous measurement of wind pressure and flow field in wind tunnel: device, method and application

Accurate assessment of the relationship between flow field and surface wind pressure distribution around buildings in wind tunnel tests is crucial for understanding the interaction mechanism between wind and buildings. Despite notable technological advancements in dynamic pressure measurement and flow visualization, the acquirement of synchronous data on flow and wind pressure around buildings still faces challenges in terms of accuracy, cost, and operational complexity. Given this, a frame synchronization technique has been developed to collect flow field and wind pressure data based on particle image velocimetry and Scanivalve dynamic pressure measurement. Meanwhile, this study established a more precise correction method for the distortion effect of the synchronously measured wind pressure signal. Furthermore, the paper demonstrates the feasibility of synchronously measuring the flow field and the corrected wind pressure in time through the flow around triangular prism test. Experimental results indicate that the corrected wind pressure distribution on triangular prism surface is consistent with the temporal variations in instantaneous flow velocity and vorticity change, thereby verifying the reliability of the synchronous test system.

Topology transition description of horseshoe vortex system in juncture flows with velocity characteristic lines

Particle image velocimetry and numerical simulation results of juncture flows were analyzed to parametrically investigate topology transition. The vortex system evolutions from non-vortex to multi-vortex with variations in obstacle bluntness, obstacle width, flow velocity and boundary layer thickness are discussed from the perspective of velocity characteristic lines. The velocity characteristic lines of u=0, v=0, and ∇2v=0 are adopted to describe the vortex system evolution. The motions of the characteristic lines with juncture flow parameters are described in detail, and the corresponding reflections of the vortex system patterns are illustrated. A panoramic picture of the development of velocity characteristic lines corresponding to the HSV topology transition from a non-vortex to a multi-vortex system with variations in the juncture flow parameter is established. Two methods for determining the attachment/separation pattern of the most upstream singularity are proposed. One method is based on the number of intersections of the u=0 and v=0 velocity characteristic curve lines, and the other is based on the relative positions of the most upstream feet of the u=0 and v=0 loop curves with both feet attached to the wall.

Enhanced energy harvesting of fibrous composite membranes via plasma-piezopolymer interaction

Electroactive sites and crystallinity play a key role to improve the energy conversion performance of piezoelectric polymeric composites. However, these characteristics are attained through time-consuming thermal annealing (TA), which limits the practicality of flexible piezoelectric harvesters (f-PEHs). Here, a short-time plasma annealing (PA) technique was introduced to piezoelectric composite fibers (PCFs) for rapid crystallization and enhanced electroactive β-phase of polymer. The percentage of change in crystallinity of 10-minute PA treated PCF is 20 % compared to TA-treated PCF (annealing time = 2 h), which results in a higher voltage of 2.4 times and current of 3.8 times than the TA-based f-PEH. Finite element analysis confirmed the optimal PA treatment duration and superior performance of PA-treated PCFs. Further PA treated f-PEH was tested for vibration sensor by attaching it to a circulator pipe, confirming its high potential for accurately detecting variations in flow velocity (8–28 L/min). These results demonstrate that PA is an efficient technique for producing high-performance f-PEHs with an increased crystallinity (Xc =22.81 %) in a short time (10 minutes), offering a practical solution for consumer electronic devices and wireless sensors.

Separating Light Impurities from the Combed Heap in the Adapter Case

Introduction. It is possible to increase the separating of loose grain on the lattice bottom of the combine harvester feeder house by removing most of the light impurities from the combed heap using an inertial cleaning system built into the combing adapter body.Aim of the Study. The study is aimed at developing an inertial system for separating light impurities in the combing header body and optimizing its main parameters.Materials and Methods. The object of the study was a large-scale model of a pneumatic cleaning device to simulate the motion of air and components of a combed grain heap inside the combing adapter body. It was a two-factor experiment with three variations of the air flow velocity (4.5; 5.5; 6.5 m/s) and the width of the air channel (0.26; 0.29; 0.32 m). The studies were conducted on a combed heap of Moskovskaya 56 wheat with a moisture content of about 12%. As a parameter for optimization and response function, a portion of the combed heap was selected from the body of the installation with an air flow.Results. According to the results of the experimental studies, it was found that the air flow velocity has a greater effect on separating glumes than the width of the air channel. A simultaneous increase in both factors leads to an improved separation. At the same time, if increasing the air flow velocity ensures a stable increase in the proportion of the combed heap and is limited only by the air velocity at which grain appears in the combed heap along with the glumes, then changing the channel width allows achieving the parameter optimal value.Discussion and Conclusions. The use of an inertial cleaning system makes it possible to remove almost completely light impurities from the combed heap. The optimal parameters of the device are: channel width 0.28...0.3 m, air flow velocity 6...6.5 m/s.

Analysis of the influence of the daily regulation of power stations on navigable flow conditions at river confluences using the LSTM model

The daily operations of large hydropower stations on rivers induce frequent variations in downstream water levels and flow velocities, resulting in unsteady and complex hydraulic characteristics at the confluence of the main stream and its tributaries, which adversely affect navigation safety. The continuity and momentum equations, along with the RNG k-ϵ turbulence model and the VOF model, were employed to simulate the river flow process at the confluence under unsteady flow conditions. The simulated results for water levels and velocity vector fields are in good agreement with experimental data. Variations in hydraulic characteristics, including water level, flow velocity, and longitudinal gradient at the confluence of the main stream and its tributaries, were analysed. The results indicated that the water level at the confluence decreases when the tributary merges with the main stream. As the confluence ratio increases, fluctuations in the water level at the confluence decrease. However, an increase in the staggered period results in greater fluctuations in the water level within this region. Moreover, a crescent-shaped high-speed flow region is formed at the confluence of the tributary and the main stream. As the unsteady flow discharge of the main stream increases, the relative area of this region correspondingly enlarges, reaching its maximum at peak discharge, and subsequently gradually diminishes as the discharge decreases. Based on these simulation data, a Long Short-Term Memory (LSTM) model was developed to effectively predict water levels and flow velocities, providing a more convenient and accurate method for obtaining real-time information on confluence areas than traditional mathematical and statistical approaches. This study provides novel insights into predicting flow characteristics in confluence areas, thereby offering a basis for formulating navigation safety plans.

Research on a new pressure pulsator

Pulsators are widely used to study the dynamic characteristics of liquid flow components. However, it is difficult to adapt the existing actuators to the excitation requirements under high pressures, low temperatures, and toxic media. This study describes the design of a novel pressure pulsation device and presents the results of simulations and experimental tests. The flow field is simulated under a series of working conditions, and the effects of the rotation speed, flow rate, inlet pressure, and gap between the rotor and stator on the peak-to-peak amplitude, spectral amplitude, and flow resistance coefficient of the actuator outlet are analyzed. A prediction model for the corresponding parameters is developed using multiple linear regression. In high-pressure (20 MPa) hydraulic pipeline tests, the excitation device can generate pulsating flow with peak-to-peak amplitudes of more than 7 MPa in the time domain and 2 MPa in the frequency domain. The upstream and downstream regions of the internal flow field are periodically joined and detached by the blade rotation, which results in periodic variations in flow velocity and pressure. The relative error between the model predictions and the three-dimensional simulation and experimental values is less than 7%, satisfying industrial requirements. This work facilitates a solution to the problem of dynamic excitation when analyzing the response characteristics of fluid equipment in high-pressure pipelines and provides a method for forecasting actuator output effects.

Correction to “Individual and combined impacts of carbon dioxide enrichment, heatwaves, flow velocity variability, and fine sediment deposition on stream invertebrate communities”

Correction to “Individual and combined impacts of carbon dioxide enrichment, heatwaves, flow velocity variability, and fine sediment deposition on stream invertebrate communities”

The effects of acoustic disturbances and mechanical vibration on laminar premixed flames: A comparative study

The energy conversion between the combustion process and acoustic waves is very complex in high-performance propulsion systems, which may trigger large-amplitude combustion instabilities, potentially leading to severe vibration or structural damage. Both acoustic disturbances and mechanical vibration are found to be able to cause the combustion instability, but their differences on the influence of laminar premixed flames are still unknown. In this paper, a premixed methane flame burner was disturbed by either a loudspeaker or an electromagnetic vibration exciter, and the effects of their forcing frequencies and amplitudes on the dynamic responses of the premixed methane flame were evaluated. Specifically, the unsteady heat release rate was measured by a photomultiplier tube, and the flame dynamic behaviors were captured by a high-speed camera with image intensifier. Furthermore, the acoustic disturbances upstream of the flame was measured by the two-microphone method, and the structure vibration was measured by an accelerometer. Then, the flame transfer functions were obtained at various equivalence ratios and mean flow velocities. The results demonstrated that the premixed flame exhibited obvious band-pass filtering characteristics when subjected to external forcing, whether through a loudspeaker or an electromagnetic vibration exciter. In addition, increasing either acoustic or structure excitation amplitude to a large extent can make the flame respond in a nonlinear manner. However, when the flame was subjected to mechanical vibration, the peak frequency corresponding to the maximum gain of the flame transfer function had minimal sensitivity to variations in equivalence ratios and mean flow velocities. In contrast, the acoustic disturbances were more likely to induce the nonlinear flame responses and flame front wrinkling.

Spatial Distribution and Variation in Debris Cover and Flow Velocities of Glaciers during 1989–2022 in Tomur Peak Region, Tianshan Mountains

In this study, we utilized a feature optimization method combining texture and topographical factors with the random forest (RF) approach to identify changes in the extent of the debris cover around the Tianshan Tomur Peak between 1989 and 2022. Based on Sentinel-1 image data, we extracted glacier flow velocities using an offset tracking method and conducted a long-term analysis of flow velocities in combination with existing datasets. The debris identification results for 2022 showed that the debris-covered area in the study region was 409.2 km2, constituting 22.8% of the total glacier area. Over 34 years, the area of debris cover expanded by 69.4 km2, reflecting a growth rate of 20.0%. Analysis revealed that glaciers in the Tomur Peak area have been decelerating at an overall rate of −4.0% per decade, with the complexity of the glacier bed environment and the instability of the glacier’s internal structure contributing to significant seasonal and interannual variability in the movement speeds of individual glaciers.

Numerical analysis of blood flow in the abdominal aorta under simulated weightlessness and earth conditions

Blood flow through the abdominal aorta and iliac arteries is a crucial area of research in hemodynamics and cardiovascular diseases. To get in to the problem, this study presents detailed analyses of blood flow through the abdominal aorta, together with left and right iliac arteries, under Earth gravity and weightless conditions, both at the rest stage, and during physical activity. The analysis were conducted using ANSYS Fluent software. The results indicate, that there is significantly less variation in blood flow velocity under weightless conditions, compared to measurement taken under Earth Gravity conditions. Study presents, that the maximum and minimum blood flow velocities decrease and increase, respectively, under weightless conditions. Our model for the left iliac artery revealed higher blood flow velocities during the peak of the systolic phase (systole) and lower velocities during the early diastolic phase (diastole). Furthermore, we analyzed the shear stress of the vessel wall and the mean shear stress over time. Additionally, the distribution of oscillatory shear rate, commonly used in hemodynamic analyses, was examined to assess the effects of blood flow on the blood vessels. Countermeasures to mitigate the negative effects of weightlessness on astronauts health are discussed, including exercises performed on the equipment aboard the space station. These exercises aim to maintain optimal blood flow, prevent the formation of atherosclerotic plaques, and reduce the risk of cardiovascular complications.

Dynamic Ultrasound Localization Microscopy Without ECG-Gating

ObjectiveDynamic Ultrasound Localization Microscopy (DULM) has first been developed for non-invasive Pulsatility measurements in the rodent brain. DULM relies on the localization and tracking of microbubbles (MBs) injected into the bloodstream, to obtain highly resolved velocity and density cine-loops. Previous DULM techniques required ECG-gating, limiting its application to specific datasets, and increasing acquisition time. The objective of this study is to eliminate the need for ECG-gating in DULM experiments by introducing a motion-matching method for time registration. MethodsWe developed a motion-matching algorithm based on tissue Doppler that leverages the cyclic tissue motion within the brain. Tissue Doppler was estimated for each group of frames in the acquisitions, at multiple locations identified as local maxima in the skin above the skull. Subsequently, each group of frames was time-registered to a reference group by delaying it based on the maximum correlation value between their respective tissue Doppler signals. This synchronization ensured that each group of frames aligned with the brain tissue motion of the reference group, and consequently, with its cardiac cycle. As a result, velocities of MBs could be averaged to retrieve flow velocity variations over time. ResultsInitially validated in ECG-gated acquisitions in a rat model (n = 1), the proposed method was successfully applied in a mice model in 2D (n = 3) and in a feline model in 3D (n = 1). Performing time-registration with the proposed motion-matching method or by using ECG-gating leads to similar results. For the first time, dynamic velocity and density cine-loops were extracted without the need for any information on the animal ECG, and complex dynamic markers such as the Pulsatility index were estimated. ConclusionResults suggest that DULM can be performed without external gating, enabling the use of DULM on any ULM dataset where enough MBs are detectable. Time registration by motion-matching represents a significant advancement in DULM techniques, making DULM more accessible by simplifying its experimental complexity.

Residential building and sub-building level flood damage analysis using simple and complex models

AbstractFlood damage assessment is critical for optimal risk management investments. Damage models evaluate physical damage or monetary loss from direct building exposure to flood hazard processes. Traditional models represent a simple relationship whereby physical damage increases with water depth. More complex models offer an improved understanding of vulnerability, analysing interactions between multiple hazard and exposure variables that drive damage. Our study investigates whether increasing model complexity and explanatory damage variables improves prediction precision and reliability at residential building and sub-building (component) levels. We evaluate simple and complex empirical univariable and multivariable models for flood damage prediction. The Random Forest algorithm learned on multiple hazard and exposure explanatory variables outperformed linear and non-linear univariable regression approaches. Random Forest model predictive precision was highest when learning was limited to water depth and several important explanatory damage variables (flow velocity, area and floor height). Component damage models demonstrated high predictive precision for internal finishes and services. Precision reduced for structure and external finishes as damage samples for model learning were limited. High performing but complex multivariable models require further spatio-temporal transfer investigation to determine opportunities for accurate and reliable object-specific flood damage prediction in data scarce locations.

Transition to oscillatory instability of lean methane–air flames in microchannels

Micro-flow reactors and porous media burners are prone to instability in the form of flame with repetitive extinction and ignition (FREI) near the region of a temperature gradient. Although significant progress has been made in this field, there is still a lack of understanding regarding the nature of such stable-to-unstable transition. Some studies reported a smooth and continuous instability transition in microchannels, interpreting this phenomenon as a supercritical bifurcation. Meanwhile, others have observed that the transition is subcritical, with rapid, stepwise evolution of the stable flame to FREI. This study aims to rigorously determine the transition character theoretically and numerically using a two-dimensional model with a precise resolution of the bifurcation parameter (flow velocity) near the critical point and gradual wall temperature ramp. The results indicate that the transition is a subcritical bifurcation with strong hysteresis. However, the amplitude of the limit cycle born in the bifurcation point could be small compared to FREI-like oscillations. Moreover, further development of the instability depends significantly on the channel width. In relatively wide channels, the stable regime transforms immediately into the extinction/ignition one with rapid growth in amplitude. In moderate channels, complex transitional dynamics were observed with an evident pulsating regime, which evolved into FREI through mixed-mode oscillations. In narrow channels, the amplitude of transitional pulsating flame becomes comparable to the fully-developed extinction/ignition cycles, and the bifurcation diagram has a continuous character with no significant jumps or discontinuities. Such qualitative variation of transition character provides a possible explanation for contradictory interpretations presented in the literature.Novelty and Significance StatementCurrently, there is no consensus about the character of transition between the stable and extinction/ignition regimes in microchannels. Some studies have reported a continuous instability transition with an evident pulsating regime, interpreting it as a supercritical bifurcation, while others have observed subcritical bifurcation with a rapid transition. The novelty of this research lies in the rigorous determination of the bifurcation type and further instability development in microchannels of different widths based on an accurate simulation of flame dynamics near the critical point with very small steps of the flow velocity variation, along with the bifurcation theory. The study contributes to understanding the instability transition nature and may explain the different interpretations of the transitional phenomenon found in the literature. The results offer valuable insights for designing micro-scale and porous media combustion devices.

VOF based model of numerical simulation for single aluminum droplet evaporation and combustion

ABSTRACT This study investigates the combustion of a single aluminum droplet in a high-temperature convective setting, focusing on the interplay between the environment and droplet evaporation combustion. Using the VOF numerical method, a two-dimensional multiphase flow combustion model for micron-sized aluminum droplets is developed. Experimental validation compares predicted droplet diameter with experimental data. The combustion behavior of aluminum droplets in high-temperature convective environments is analyzed, emphasizing gas-phase combustion during stable stages. Parametric variations in flow velocity and oxygen concentration reveal the formation of vortices around the droplet, influencing aluminum vapor accumulation and evaporation rates. Combustion primarily occurs at the droplet’s windward side, with reaction rates decreasing downstream. Increasing gas velocity from 1.5 m/s to 3 m/s thins the aluminum vapor concentration boundary layer, boosting combustion rates by 35%. Elevating oxygen concentration from 20% to 50% brings the flame closer to the droplet, accelerating combustion rates by 2.7 times, suggesting oxygen concentration’s role in reaction acceleration and combustion duration reduction. This research offers insights for simulating aluminum droplets in propellant applications.

Echocardiographic Detection of Subclinical Left Ventricular Dysfunction in Asymptomatic Type Two Diabetes Mellitus

Background: Before systolic dysfunction and symptomatic heart, diabetic cardiomyopathy begins with left ventricular diastolic dysfunction (LVDD). Echocardiographic modalities were used to detect subclinical LV impairment in asymptomatic type 2 diabetics. This study aimed to identify subclinical left ventricular impairment in asymptomatic patients with type two diabetes using several echocardiographic techniques. Methods: In the present prospective cohort study, 30 adults over 18 having type II diabetes mellitus (DM) (Group I) and 20 normal controls (Group II) were studied. Transthoracic echocardiography and 12-lead ECG were performed on all individuals. Results: Pulsed wave Doppler techniques revealed significant variation in transmitral flow velocities between groups, including septal e', lateral mitral annulus early velocity (e'), septal early diastolic peak flow velocity (E)\e', Lateral E\e', and average E\e'. EF was significantly decreased in group I (P < 0.001). With a p-value of 0.001, LVESD was significantly higher in group I. The septal, lateral, and average systolic mitral annulus (S') motions in group II were significantly larger than those in group I. When comparing groups, I and II, the first showed much longer myocardial performance index (MPI) and isovolumetric contraction time (IVCT). The ET for Group I was significantly lower than that of Group II. The study group exhibited significantly greater levels of fasting blood sugar, post-prandial blood sugar, and haemoglobin A1C (HBA1C) compared to the control group (P <0.001). Conclusions: Patients having diabetes mellitus exhibited considerably greater levels of DM history fasting glucose levels, postprandial glucose levels, haemoglobin A1C (HBA1C), E/e´ ratio, LVESD, IVCT, and MPI, while having significantly lower EF and ET relative to the healthy group.