Van Der Waals Interactions Research Articles

Dynamic Transformation of High-Architectural Nanocrystal Superlattices upon Solvent Molecule Exposure.

The cluster-based body-centered-cubic superlattice (cBCC SL) represents one of the most complicated structures among reported nanocrystal assemblies, comprised of 72 truncated tetrahedral quantum dots per unit cell. Our previous report revealed that truncated tetrahedral quantum dots within cBCC SLs possessed highly controlled translational and orientational order owing to an unusual energetic landscape based on the balancing of entropic and enthalpic contributions during the assembly process. However, the cBCC SL's structural transformability and mechanical properties, uniquely originating from such complicated nanostructures, have yet to be investigated. Herein, we report that cBCC SLs can undergo dynamic transformation to face-centered-cubic SLs in response to post-assembly molecular exposure. We monitored the dynamic transformation process using in situ synchrotron-based small-angle X-ray scattering, revealing a dynamic transformation involving multiple steps underpinned by interactions between incoming molecules and TTQDs' surface ligands. Furthermore, our mechanistic study demonstrated that the precise configuration of TTQDs' ligand molecules in cBCC SLs was key to their high structural transformability and unique jelly-like soft mechanical properties. While ligand molecular configurations in nanocrystal SLs are often considered minor features, our findings emphasize their significance in controlling weak van der Waals interactions between nanocrystals within assembled SLs, leading to previously unremarked superstructural transformability and unique mechanical properties. Our findings promote a facile route toward further creation of soft materials, nanorobotics, and out-of-equilibrium assemblies based on nanocrystal building blocks.

Construction and Application of Nanozyme Sensor Arrays.

Compared with traditional "lock-key mode" biosensors, a sensor array consists of a series of sensing elements based on intermolecular interactions (typically hydrogen bonds, van der Waals forces, and electrostatic interactions). At the same time, sensor arrays also have the advantages of fast response, high sensitivity, low energy consumption, low cost, rich output signals, and imageability, which have attracted widespread attention from researchers. Nanozymes are nanomaterials which own enzyme-like properties. Because of the adjustable activity, high stability, and cost effectiveness of nanozymes, they are potential candidates for construction of sensor arrays to output different signals from analytes through the chemoresponse of colorants, which solves the shortcomings of traditional sensors that they cannot support multiple detection and lack universality. Recently, a sensor array based on nanozymes as nonspecific recognition receptors has attracted much more attention from researchers and has been applied to precise recognition of proteins, bacteria, and heavy metals. In this perspective, attention is given to nanozymes and the regulation of their enzyme-like activity. Particularly, the building principles and methods for sensor arrays based on nanozymes are analyzed, and the applications are summarized. Finally, the approaches to overcome the challenges and perspectives are also presented and analyzed for facilitating further research and development of nanozyme sensor arrays. This perspective should be helpful for gaining insight into research ideas within the field of nanozyme sensor arrays.

Fluorophilic Sigma(σ)‐Lock Self‐Healable Copolymers

Although F‐containing molecules and macromolecules are often used in molecular biology to increase the binding with Lewis acidic groups by introducing favorable C‐F dipoles, there is virtually no experimental evidence and limited understanding of the nature of these interactions, especially their role in synthetic polymeric materials. These studies elucidate the molecular origin of inter‐ and intra‐chain interactions responsible for self‐healing of F‐containing copolymers composed of pentafluorostyrene and n‐butyl acrylate units (p(PFS/nBA). Guided by dynamic surface oscillating force (SOF) and spectroscopic measurements supported by molecular dynamics (MD) simulations, these studies show that the reformation of σ‐σ orbitals in ‐C‐F of PFS and CH3CH2‐ of nBA units enables the recovery of entropic energy via flouorophilic‐σ‐lock van der Waals forces when PFS/nBA molar ratios are ~50/50. The strength of these interactions determined experimentally for self‐healable PFS/nBA compositions is in the order ~0.3 kcal/mol which primarily comes from flouorophilic‐σ‐lock (~70%) contributions. These interactions are significantly diminished for non‐self‐healable counterparts. Strongly polarized ‐C‐F σ orbitals create lateral dipolar forces enhancing the affinity towards ‐C‐H orbitals, facilitating energetically favorable interactions. Entropic recovery driven by non‐covalent bonding offers a valuable tool in designing materials with unique functionalities, particularly self‐healable batteries or other energy storage devices.

Dynamics and Energetics of Ion Adsorption at the Interface between a Pure Ionic Liquid and Carbon Electrodes.

Molecular dynamics simulations have been used extensively to determine equilibrium properties of the electrode-electrolyte interface in supercapacitors held at various potentials. While such studies are essential to understand and optimize the performance of such energy storage systems, investigation of the dynamics of adsorption during the charge of the supercapacitors is also necessary. Dynamical properties are especially important to get an insight into the power density of supercapacitors, one of their main assets. In this work, we propose a new method to coarse-grain simulations of all-atom systems and compute effective Lennard-Jones and Coulomb parameters, allowing subsequently to analyze the trajectories of adsorbing ions. We focus on pure 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide in contact with planar carbon electrodes. We characterize the evolution of the ion orientation and ion-electrode distance during adsorption and show that ions reorientate as they adsorb. We then determine the forces experienced by the adsorbing ions and demonstrate that Coulomb forces are dominant at a long range while van der Waals forces are dominant at a short range. We also show that there is an almost equal contribution from the two forces at an intermediate distance, explaining the peak of ion density close to the electrode surface.

Fundamentals and emerging optical applications of hexagonal boron nitride: a tutorial

Hexagonal boron nitride (hBN), also known as white graphite, is a transparent layered crystal with a wide bandgap. Its crystal structure resembles graphite, featuring layers composed of honeycomb lattices held together through van der Waals forces. The layered crystal structure of hBN facilitates exfoliation into thinner flakes and makes it highly anisotropic in in-plane and out-of-plane directions. Unlike graphite, hBN is both insulating and transparent, making it an ideal material for isolating devices from the environment and acting as a waveguide. As a result, hBN has found extensive applications in optical devices, electronic devices, and quantum photonic devices. This comprehensive tutorial aims to provide readers with a thorough understanding of hBN, covering its synthesis, lattice and spectroscopic characterization, and various applications in optoelectronic and quantum photonic devices. This tutorial is designed for both readers without prior experience in hBN and those with expertise in specific fields seeking to understand its relevance and connections to others.

Multi-scale analysis of virgin/aged/recycled asphalt self-healing performance based on molecular simulation and micro-macro tests

Conventional macro-micro experiments have not fully elucidated the thermal self-healing mechanism of virgin, aged, and recycled asphalt at the molecular level at different temperatures. Molecular dynamics and macro-micro experiments were used to investigate the multi-scale mechanism of thermal self-healing of nano-cracks in three asphalt types. The molecular characteristics (concentration, energy changes, and molecular diffusion properties) of the three asphalt types were simulated during self-healing using molecular dynamics simulations Macro-micro experimental tests were conducted to validate the simulation results. The self-healing process was analyzed at multiple scales, and correlation analysis between the self-healing parameters and the macroscopic healing characteristics was performed at nano- and microscopic scales. The results showed that the relative concentration increased significantly from 0 mol/L to 0.6 mol/L in the 60–80 Å range during the long-distance self-healing phase (0–40 ps), promoting the rapid reorganization of molecules around cracks and the formation of self-healing networks. The van der Waals forces were the dominant forces affecting self-healing, and the transition from repulsive to attractive forces promoted the self-healing of cracks. This study clarifies the thermal self-healing mechanism of asphalt cracks at multiple scales, ensuring the sustainable use of asphalt materials.

A DFTB study on the electronic response of encapsulated DNA nucleobases onto chiral CNTs as a sequencer

Sequencing the DNA nucleobases is essential in the diagnosis and treatment of many diseases related to human genes. In this article, the encapsulation of DNA nucleobases with some of the important synthesized chiral (7, 6), (8, 6), and (10, 8) carbon nanotubes were investigated. The structures were modeled by applying density functional theory based on tight binding method (DFTB) by considering semi-empirical basis sets. Encapsulating DNA nucleobases on the inside of CNTs caused changes in the electronic properties of the selected chiral CNTs. The results confirmed that van der Waals (vdW) interactions, π-orbitals interactions, non-bonded electron pairs, and the presence of high electronegative atoms are the key factors for these changes. The result of electronic parameters showed that among the CNTs, CNT (8, 6) is a suitable choice in sequencing guanine (G) and cytosine (C) DNA nucleobases. However, they are not able to sequence adenine (A) and thymine (T). According to the band gap energy engineering approach and absorption energy, the presence of G and C DNA nucleobases decreased the band gap energy of CNTs. Hence selected CNTs suggested as biosensor substrates for sequencing G and C DNA nucleobases.

High-resolution crystal structure of the double nitrate hydrate [La(NO3)6]2[Ni(H2O)6]3·6H2O

This study introduces bis[hexakis(nitrato-κ2 O,O′)lanthanum(III)] tris[hexaaquanickel(II)] hexahydrate, [La(NO3)6]2[Ni(H2O)6]3·6H2O, with a structure refined in the hexagonal space group R\overline{3}. The salt comprises [La(NO3)6]3− icosahedra and [Ni(H2O)6]2+ octahedra, thus forming an intricate network of interpenetrating honeycomb lattices arranged in layers. This arrangement is stabilized through strong hydrogen bonds. Two successive layers are connected via the second [Ni(H2O)6]2+ octahedra, forming sheets which are stacked perpendicular to the c axis and held in the crystal by van der Waals forces. The synthesis of [La(NO3)6]2[Ni(H2O)6]3·6H2O involves dissolving lanthanum(III) and nickel(II) oxides in nitric acid, followed by slow evaporation, yielding green hexagonal plate-like crystals.

Phytic Acid-Promoted Deposition of Gold Nanoparticles with Grafted Cationic Polymer Brushes for the Construction of Synergistic Contact-Killing and Photothermal Bactericidal Coatings.

Medical implants are constantly facing the risk of bacterial infections, especially infections caused by multidrug resistant bacteria. To mitigate this problem, gold nanoparticles with alkyl bromide moieties (Au NPs-Br) on the surfaces were prepared. Xenon light irradiation triggered the plasmon effect of Au NPs-Br to induce free radical graft polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA), leading to the formation of poly(DMAEMA) brush-grafted Au NPs (Au NPs-g-PDM). The Au NPs-g-PDM nanocomposites were conjugated with phytic acid (PA) via electrostatic interaction and van der Waals interaction. The as-formed aggregates were deposited on the titanium (Ti) substrates to form the PA/Au NPs-g-PDM (PAP) hybrid coatings through surface adherence of PA and the gravitational effect. Synergistic bactericidal effects of contact-killing caused by the cationic PDM brushes, and local heating generated by the Au NPs under near-infrared irradiation, conferred strong antibacterial effects on the PAP-deposited Ti (Ti-PAP) substrates. The synergistic bactericidal effects reduced the threshold temperature required for the photothermal sterilization, which in turn minimized the secondary damage to the implant site. The Ti-PAP substrates exhibited 97.34% and 99.97% antibacterial and antiadhesive efficacy, respectively, against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), compared to the control under in vitro antimicrobial assays. Furthermore, the as-constructed Ti-PAP surface exhibited a 99.42% reduction in the inoculated S. aureus under in vivo assays. In addition, the PAP coatings exhibited good biocompatibility in the hemolysis and cytotoxicity assays as well as in the subcutaneous implantation of rats.

Heteroaggregation kinetics of nanoplastics and soot nanoparticles in aquatic environments

Heteroaggregation between polystyrene nanoplastics (PSNPs) and soot nanoparticles (STNPs) in aquatic environments may affect their fate and transport. This study investigated the effects of particle concentration ratio, electrolytes, pH, and humic acid on their heteroaggregation kinetics. The critical coagulation concentration (CCC) ranked CCCPSNPs > CCCPSNPs-STNPs > CCCSTNPs, indicating that heteroaggregation rates fell between homoaggregation rates. In NaCl solution, as the PSNPs/STNPs ratio decreased from 9/1 to 3/7, heteroaggregation rate decreased and CCCPSNPs-STNPs increased from 200 to 220 mM due to enhanced electrostatic repulsion. Outlier was observed at PSNPs/STNPs= 1/9, where CCCPSNPs-STNPs= 170 mM and homoaggregation of STNPs dominated. However, in CaCl2 solution where calcium bridged with STNPs, heteroaggregation rate increased and CCCPSNPs-STNPs decreased from 26 to 5 mM as the PSNPs/STNPs ratio decreasing from 9/1 to 1/9. In composite water samples, heteroaggregation occurred only at estuarine and marine salinities. Acidic condition promoted heteroaggregation via charge screening. Humic acid retarded or promoted heteroaggregation in NaCl or CaCl2 solutions by steric hindrance or calcium bridging, respectively. Other than van der Waals attraction and electrostatic repulsion, heteroaggregation was affected by steric hindrance, hydrophobic interactions, π − π interactions, and calcium bridging. The results highlight the role of black carbon on colloidal stability of PSNPs in aquatic environments.

Hydrogen evolution descriptors of 55-atom PtNi nanoclusters and interaction with graphite

Density functional simulations have been performed for Pt n Ni 55−n clusters ( n=0,12,20,28,42,55 ) to investigate their catalytic properties for the hydrogen evolution reaction (HER). Starting from the icosahedral Pt12Ni43 , hydrogen adsorption energetics and electronic d-band descriptors indicate HER activity comparable to that of pure Pt55 (distorted reduced core structure). The PtNi clusters accommodate a large number of adsorbed hydrogen before reaching a saturated coverage, corresponding to 3–4 H atoms per icosahedron facet (in total ∼70–80). The differential adsorption free energies are well within the window of |ΔGH|<0.1 eV which is considered optimal for HER. The electronic descriptors show similarities with the platinum d-band, although the uncovered PtNi clusters are magnetic. Increasing hydrogen coverage suppresses magnetism and depletes electron density, resulting in expansion of the PtNi clusters. For a single H atom, the adsorption free energy varies between −0.32 ( Pt12Ni43 ) and −0.59 eV ( Pt55 ). The most stable adsorption site is Pt–Pt bridge for Pt-rich compositions and a hollow site surrounded by three Ni for Pt-poor compositions. A hydrogen molecule dissociates spontaneously on the Pt-rich clusters. The above HER activity predictions can be extended to PtNi on carbon support as the interaction with a graphite model structure (w/o vacancy defect) results in minor changes in the cluster properties only. The cluster-surface interaction is the strongest for Pt55 due to its large facing facet and associated van der Waals forces.

Normal-to-Supercooled Liquid Transition in Molecular Glass-Formers: A Hidden Structural Transformation Fuelled by Conformational Interconversion.

Molecular dynamics and transport coefficients change significantly around the so-called Arrhenius crossover in glass-forming systems. In this article, we revisit the dynamic processes occurring in a glass-forming macrocyclic crown thiaether MeBzS2O above its glass transition, revealing two crossover temperatures: TB at 309 and TA at 333 K. We identify the second one as the Arrhenius crossover that is closely related to the normal-to-supercooled liquid transition in this compound. We show that the transformation occurring at this point goes far beyond molecular dynamics (where the temperature dependence of structural relaxation times changes its character from activation-like to super-Arrhenius), being reflected also in the internal structure and diffraction pattern. In this respect, we found a twofold local organization of the nearest-neighbor molecules via weak van der Waals forces, without the formation of any medium-range order or mesophases. The nearest surrounding of each molecule evolves structurally in time due to the ongoing fast conformational changes. We identify several conformers of MeBzS2O, demonstrating that its lowest-energy conformation is preferred mainly at lower temperatures, i.e., in the supercooled liquid state. Its increased prevalence modifies locally the short-range intermolecular order and promotes vitrification. Consequently, we indicate that the Arrhenius transition is fuelled rather by conformational changes in this glass-forming macrocyclic crown thiaether, which is a different scenario from the so-far existing concepts. Our studies combine broadband dielectric spectroscopy (BDS), X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, molecular dynamics (MD) simulations, and density functional theory (DFT) calculations.

Crystal structure and Hirshfeld surface analysis of (Z)-4-oxo-4-{phenyl[(thiophen-2-yl)methyl]amino}but-2-enoic acid

In the title compound, C15H13NO3S, the molecular conformation is stable with the intramolecular O—H...O hydrogen bond forming a S(7) ring motif. In the crystal, molecules are connected by C—H...O hydrogen bonds, forming C(8) chains running along the a-axis direction. Cohesion of the packing is provided by weak van der Waals interactions between the chains. A Hirshfeld surface analysis was undertaken to investigate and quantify the intermolecular interactions. The thiophene ring is disordered in a 0.9466 (17):0.0534 (17) ratio over two positions rotated by 180°.

Black Phosphorus Nanosheets Protect Neurons by Degrading Aggregative α-syn and Clearing ROS in Parkinson's Disease.

Although evidence indicates that the abnormal accumulation of α-synuclein (α-syn) in dopamine neurons of the substantia nigra is the main pathological feature of Parkinson's disease (PD), no compounds that have both α-syn antiaggregation and α-syn degradation functions have been successful in treating the disease in the clinic. Here, it is shown that black phosphorus nanosheets (BPNSs) interact directly with α-syn fibrils to trigger their disaggregation for PD treatment. Moreover, BPNSs have a specific affinity for α-syn through van der Waals forces. And BPNSs are found to activate autophagy to maintain α-syn homeostasis, improve mitochondrial dysfunction, reduce reactive oxygen species levels, and rescue neuronal death and synaptic loss in PC12 cells. It is also observed that BPNSs penetrate the blood-brain barrier and protect against dopamine neuron loss, alleviating behavioral disorders in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) induced mouse model and hA53T α-syn transgenic mice. Together, the study reveals that BPNSs have the potential as a novel integrated nanomedicine for clinical diagnosis and treatment of neurological diseases.

Interfacial Interactions between Nanoplastics and Biological Systems: toward an Atomic and Molecular Understanding of Plastics-Driven Biological Dyshomeostasis.

Micro- and nano-plastics (NPs) are found in human milk, blood, tissues, and organs and associate with aberrant health outcomes including inflammation, genotoxicity, developmental disorders, onset of chronic diseases, and autoimmune disorders. Yet, interfacial interactions between plastics and biomolecular systems remain underexplored. Here, we have examined experimentally, in vitro, in vivo, and by computation, the impact of polystyrene (PS) NPs on a host of biomolecular systems and assemblies. Our results reveal that PS NPs essentially abolished the helix-content of the milk protein β-lactoglobulin (BLG) in a dose-dependent manner. Helix loss is corelated with the near stoichiometric formation of β-sheet elements in the protein. Structural alterations in BLG are also likely responsible for the nanoparticle-dependent attrition in binding affinity and weaker on-rate constant of retinol, its physiological ligand (compromising its nutritional role). PS NP-driven helix-to-sheet conversion was also observed in the amyloid-forming trajectory of hen egg-white lysozyme (accelerated fibril formation and reduced helical content in fibrils). Caenorhabditis elegans exposed to PS NPs exhibited a decrease in the fluorescence of green fluorescent protein-tagged dopaminergic neurons and locomotory deficits (akin to the neurotoxin paraquat exposure). Finally, in silico analyses revealed that the most favorable PS/BLG docking score and binding energies corresponded to a pose near the hydrophobic ligand binding pocket (calyx) of the protein where the NP fragment was found to make nonpolar contacts with side-chain residues via the hydrophobic effect and van der Waals forces, compromising side chain/retinol contacts. Binding energetics indicate that PS/BLG interactions destabilize the binding of retinol to the protein and can potentially displace retinol from the calyx region of BLG, thereby impairing its biological function. Collectively, the experimental and high-resolution in silico data provide new insights into the mechanism(s) by which PS NPs corrupt the bimolecular structure and function, induce amyloidosis and onset neuronal injury, and drive aberrant physiological and behavioral outcomes.

Surface-Assisted Selective Air Oxidation of Phosphines Adsorbed on Activated Carbon

Surface-Assisted Selective Air Oxidation of Phosphines Adsorbed on Activated Carbon

Highly Porous ZnO/CNT Hybrid Microclusters for Superior UV Photodetection.

The formation of nanoscale junctions among nanoparticles in self-assembled nanostructures is crucial for improving both interfacial conductivity and structural integrity. However, the inherent reliance on weak van der Waals forces to hold nanoparticles together poses challenges in developing commercially viable devices due to their inefficient carrier transport characteristics. This study presents the successful integration of carbon nanotubes (CNTs) into highly porous nanomicrocluster arrays of ZnO, resulting in the formation of cohesive and crack-free highly porous ZnO/CNT heterojunction films. This integration marks a significant improvement in UV photodetection performance, demonstrating a record-high photocurrent to dark current ratio of 3.3 × 106 and an exceptional responsivity of 18.5 A/W at a low bias of 0.5 V and under an ultra low light density of 25 μW/cm2. These findings underscore the efficacy of this high-performance structure as a versatile and scalable platform technology for the rapid, cost-effective fabrication of hybrid photodetectors in wearable and portable devices.

Efficient wastewater decontamination using magnetic bentonite-alginate beads: A comprehensive study of adsorption dynamics, regeneration, and molecular interactions

This study enhances wastewater treatment methodologies by developing magnetic bentonite-alginate beads (MBent-A beads) for adsorbing methylene blue (MB) from aqueous solutions. Experimental and computational analyses were employed to evaluate the beads' adsorption efficiency, utilizing characterization techniques including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), point of zero charge (pHpzc), Brunauer-Emmett-Teller method (BET), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) to examine the composite’s morphology and chemistry. Findings reveal a significant adsorption capacity with the beads' specific surface area at 3.94 m2/g and a maximum adsorption capacity of 774.32 mg/g. Adsorption kinetics adhered closely to the pseudo-second-order model, indicating a rapid adsorption process, while Langmuir isotherm analysis confirmed a uniform monolayer adsorption and temperature-dependent capacities. Thermodynamic analysis showed the adsorption process to be spontaneous and exothermic, reflecting a strong affinity between MB molecules and the bead surface. The beads demonstrated durability with more than 90% removal efficiency after five regeneration cycles, highlighting a minimal decrease from 98.54% to 90.60%. In-depth theoretical investigations using density functional theory (DFT), frontier molecular orbital (FMO), reduced density gradient (RDG), and quantum theory of atoms in molecules (QTAIM) analyses identified van der Waals forces and hydrogen bonding as primary interactions driving the adsorption. The synthesis of MBent-A beads and their confirmed efficacy in dye adsorption integrates experimental research with theoretical modeling, offering a robust solution for treating dye-contaminated wastewater and underlining the potential of MBent-A beads in environmental remediation.

Formation and non-covalent interactions of binary and ternary complexes based on β-casein, Lentinus edodes mycelia polysaccharide, and taxifolin

Polyphenols, polysaccharides, and proteins are essential nutrients and functional substances present in food, and when present together these components often interact with each other to influence their structure and function. Proteins and polysaccharides are also excellent carrier materials for polyphenols. In this context, this study investigated the non-covalent interactions between taxifolin (TAX), Lentinus edodes mycelia polysaccharide (LMP), and β-casein (β-CN). β-CN and LMP spontaneously formed nanocomplexes by hydrogen bonds and van der Waals forces. The quenching constant and binding constant were (1.94 ± 0.02) × 1013 L mol−1 s−1 and (3.22 ± 0.17) × 105 L mol−1 at 298 K, respectively. The altered conformation of β-CN, resulting from the binding to LMP, affected the interaction with TAX. LMP significantly enhanced the binding affinity of TAX and β-CN, but did not change the static quenching binding mode. The binding constant for β-CN-TAX was (3.96 ± 0.09) × 1013 L mol−1, and that for the interaction between TAX and β-CN-LMP was (32.06 ± 0.05) × 1013 L mol−1. In summary, β-CN-LMP nanocomplexes have great potential as a nanocarrier for polyphenols, and this study provides a theoretical foundation for the rational design of non-covalent complexes involving LMP and β-CN, both in binary and ternary configurations.

Van der Waals Engineering of Charge Density Waves in One-Dimensional Nb6Te6 Nanowires.

One-dimensional (1D) systems have played a crucial role in the development of fundamental physics and practical applications. Recently, transition metal monochalcogenide (TMM) wires based on molybdenum (Mo) and tungsten (W) have emerged as promising platforms for investigating 1D physics in pure van der Waals (vdW) platforms. Here, we report on the bottom-up fabrication of Nb6Te6 wires down to the single-wire limit. The unique properties of Nb6Te6 single wire enable the realization of 1D charge density wave (CDW) phases in an isolated single TMM wire. Moreover, we revealed the appealing regulation of 1D CDW orders by van der Waals interactions at either the 1D-2D interface (i.e., rotation of a single wire along its wire axis) or the 1D-1D interface. Two rotation angles (30° and 0°) give rise to 3 × 1 and zigzag chain CDW morphologies, respectively, which exhibit pronounced differences in atomic displacement by a factor of 2. The interwire vdW coupling overwhelms its counterpart at the 1D-2D interface, thus locking the rotation angle (at 0°) as well as the interwire atomic registries. In contrast, interestingly, the phases of the charge oscillations are independent of the adjacent wires. The ability to tailor 1D charge orders provides a crucial addition to the toll set of vdW integrations beyond two-dimensional materials.