Validity Of Dual-energy X-ray Absorptiometry Research Articles

Validity of dual-energy x-ray absorptiometry for estimation of visceral adipose tissue and visceral adipose tissue change after surgery-induced weight loss in women with severe obesity.

Reliable and simple methods to quantify visceral adipose tissue (VAT) and VAT changes are needed. This study investigated the validity of dual-energy x-ray absorptiometry (DXA) compared with magnetic resonance imaging (MRI) for estimating VAT cross sectionally and longitudinally after surgery-induced weight loss in women with severe obesity. Women with obesity (n = 36; mean age 43 [SD 10] years; 89% White) with DXA and MRI before bariatric surgery (T0) at 12 (T12) and 24 months (T24) post surgery were included. CoreScan (GE Healthcare, Chicago, Illinois) estimated VAT from 20% of the distance between the top of the iliac crest and the base of the skull. MRI VAT (total VAT) was measured from the base of the heart to the sacrum/coccyx on a whole-body scan. Mean DXA VAT was 45% of MRI VAT at T0, 46% at T12, and 68% at T24. DXA underestimated change in MRI VAT between T0 and T12 by 26.1% (0.81 kg, p = 0.03) and by 71.7% (0.43 kg, p < 0.001) between T12 and T24. The relationship between DXA VAT and MRI VAT differed between T12 and T24 (p value for interaction = 0.03). CoreScan lacks validity for comparing VAT across individuals or for estimating the size of changes within individuals; however, within the limits of measurement error, it may provide a useful indicator of whether some VAT change has occurred within an individual.

Acute feeding has minimal effect on the validity of body composition and metabolic measures: dual-energy X-ray absorptiometry and a multi-compartment model.

Understanding the effects of acute feeding on body composition and metabolic measures is essential to the translational component and practical application of measurement and clinical use. To investigate the influence of acute feeding on the validity of dual-energy X-ray absorptiometry (DXA), a four-compartment model (4C) and indirect calorimetry metabolic outcomes, thirty-nine healthy young adults (n 19 females; age: 21·8 (sd 3·1) years, weight; 71·5 (sd 10·0) kg) participated in a randomised cross-over study. Subjects were provided one of four randomised meals on separate occasions (high carbohydrate, high protein, ad libitum or fasted baseline) prior to body composition and metabolic assessments. Regardless of macronutrient content, acute feeding increased DXA percent body fat (%fat) for the total sample and females (average constant error (CE):-0·30 %; total error (TE): 2·34 %), although not significant (P = 0·062); the error in males was minimal (CE: 0·11 %; TE: 0·86 %). DXA fat mass (CE: 0·26 kg; TE: 0·75 kg) and lean mass (LM) (CE: 0·83 kg; TE: 1·23 kg) were not altered beyond measurement error for the total sample. 4C %fat was significantly impacted from all acute feedings (avg CE: 0·46 %; TE: 3·7 %). 4C fat mass (CE: 0·71 kg; TE: 3·38 kg) and fat-free mass (CE: 0·55 kg; TE: 3·05 kg) exceeded measurement error for the total sample. RMR was increased for each feeding condition (TE: 1666·9 kJ/d; 398 kcal/d). Standard pre-testing fasting guidelines may be important when evaluating DXA and 4C %fat, whereas additional DXA variables (fat mass and LM) may not be significantly impacted by an acute meal. Measuring body composition via DXA under less stringent pre-testing guidelines may be valid and increase feasibility of testing in clinical settings.

Assessing Periprosthetic Bone in Total Wrist Arthroplasty: The Validity of DXA

Introduction: Dual-energy X-ray absorptiometry (DXA) can measure bone mineral density (BMD) around joint arthroplasties. DXA has never been used in total wrist arthroplasties (TWA). We investigated (1) whether BMD differs between 2 TWAs implanted in the same cadaver forearm, (2) the effect of forearm rotation and wrist extension on measured BMD around TWA in a cadaver, and (3) the precision of DXA in a cadaver and patients.Methodology: One ROI around the distal and 1 and 3 ROIs (ROI1-3) around the proximal component were used. Ten DXA scans were performed on forearm and femur mode convertible to orthopedic knee mode without arthroplasty, with ReMotion, and with Motec TWA in one cadaver forearm. Ten scans with 5° increments from 90°–70° pronation and 0°–20° extension, were performed with Motec. Precision was calculated as coefficient of variation (CV%) and least significant change (LSC%) from cadaver scans and double examinations with femur mode converted to orthopedic knee mode in 40 patients (20 ReMotion, 20 Motec).Results: BMD was higher in all Motec than corresponding ReMotion ROIs (p < 0.05). BMD changed with 10° supination in the distal ROI and ROI1, and with 5° extension in the distal ROI (p < 0.05). In the cadaver the orthopedic knee mode was more precise than the forearm mode in 3 Motec ROIs (p < 0.05). In patients CV was 2.21%–3.08% in the distal ROI, 1.66%–2.01% in the proximal ROI, and 1.98%–2.87% with 3 ROIs.Conclusions: DXA is feasible for BMD measurement around the proximal component using the orthopedic knee mode, but not the distal component of TWA.

Body fat gain and loss differentially influence validity of dual-energy x-ray absorptiometry and multifrequency bioelectrical impedance analysis during simultaneous fat-free mass accretion

The validity of dual-energy x-ray absorptiometry (DXA) and multifrequency bioelectrical impedance analysis (MFBIA) for detecting changes in fat mass (FM), fat-free mass (FFM), and body fat percentage (BF%) was evaluated, as compared to a rapid 4-component (4C) model, in 31 females completing 8 weeks of resistance training. Analyses were performed in all participants (ALL) and in subgroups that gained FFM but lost FM (R subgroup) or gained both FFM and FM (G subgroup). It was hypothesized that methods would comparably detect changes in ALL, but discrepancies would occur in subgroup analysis. Changes in body composition did not significantly differ between 4C, DXA, and MFBIA. Equivalence testing indicated that similar changes were detected by DXA and MFBIA, compared to 4C, for ΔFFM in all analyses and ΔBF% in ALL and R subgroup. ΔFM was equivalent to 4C only in R subgroup for DXA and G subgroup for MFBIA. For ΔFM and ΔBF%, DXA and MFBIA produced similar magnitude errors in ALL. However, DXA exhibited lower error in R subgroup, whereas MFBIA exhibited lower error in G subgroup. For ΔFFM, DXA and MFBIA exhibited relatively similar errors in ALL and R subgroup, although MFBIA displayed proportional bias and weaker correlations with 4C than DXA. In G subgroup, MFBIA exhibited lower errors and a higher correlation with 4C ΔFFM than DXA. Although both DXA and MFBIA may have utility for estimating body composition changes during FFM accretion, DXA may be superior during simultaneous FM loss, whereas MFBIA may produce lower error during simultaneous FM gain.

Validity of the 4-compartment model using dual energy X-ray absorptiometry-derived body volume in overweight individuals.

The purpose of the present study was to assess the validity of dual-energy X-ray absorptiometry (DXA) to estimate body volume (BV) for use in a 4-compartment (4C) body composition model in an overweight/obese population. Body composition of 61 overweight/obese adults (age: 37.3 ± 10.0 years; height: 170.2 ± 9.5 cm; body mass: 97.1 ± 17.4 kg) was measured by 2 methods: a criterion 4C model and a DXA-derived BV 4C model. For both models, bioelectrical impedance spectroscopy was used to estimate total body water; total body bone mineral content was measured by a full-body DXA scan. For the criterion 4C model, BV was derived from air displacement plethysmography; for the DXA-4C model, BV was derived from previously published coefficients. Total error (TE) and standard error of the estimate (SEE) values for BV (TE = 1.11 L; SEE = 0.01 L) and body fat percentage (%fat) (TE = 2.92%; SEE = 0.32%) represented good to very good agreement between models. The DXA-derived measures of body composition (BV: 96.6 ± 18.1 L; %fat: 39.5% ± 8.1%; fat mass: 38.5 ± 11.9 kg), were significantly greater (p < 0.001) than 4C criterion measures (BV: 95.7 ± 17.6 L; %fat: 37.0% ± 7.6%; FM: 36.0 ± 10.8 kg) with the exception of lean mass, which was significantly lower (p < 0.001; DXA-4C: 58.2 ± 11.2 kg; criterion 4C: 60.7 ± 12.0 kg). Although small statistically significant mean differences were observed, TE and SEE results support the use of the DXA-4C method, which requires less time and equipment, for valid estimates of body composition in overweight/obese individuals.

Precision of dual-energy X-ray absorptiometry of the knee and heel: methodology and implications for research to reduce bone mineral loss after spinal cord injury.

Methodological validation of dual-energy x-ray absorptiometry (DXA)-based measures of leg bone mineral density (BMD) based on the guidelines of the International Society for Clinical Densitometry. The primary objective of this study was to determine the precision of BMD estimates at the knee and heel using the manufacturer provided DXA acquisition algorithm. The secondary objective was to determine the smallest change in DXA-based measurement of BMD that should be surpassed (least significant change (LSC)) before suggesting that a biological change has occurred in the distal femur, proximal tibia and calcaneus. Academic Research Centre, Canada. Ten people with motor-complete SCI of at least 2 years duration and 10 people from the general population volunteered to have four DXA-based measurements taken of their femur, tibia and calcaneus. BMDs for seven regions of interest (RIs) were calculated, as were short-term precision (root-mean-square (RMS) standard deviation (g cm-2), RMS-coefficient of variation (RMS-CV, %)) and LSC. Overall, RMS-CV values were similar between SCI (3.63-10.20%, mean=5.3%) and able-bodied (1.85-5.73%, mean=4%) cohorts, despite lower absolute BMD values at each RIs in those with SCI (35%, heel to 54%, knee; P<0.0001). Precision was highest at the calcaneus and lowest at the femur. Except at the femur, RMS-CV values were under 6%. For DXA-based estimates of BMD at the distal femur, proximal tibia and calcaneus, these precision values suggest that LSC values >10% are needed to detect differences between treated and untreated groups in studies aimed at reducing bone mineral loss after SCI.

Validation of Dual-energy X-Ray Absorptiometry to Predict Body Composition of Channel Catfish, Ictalurus punctatus.

Dual-energy X-ray absorptiometry (DXA) provides a noninvasive way to determine lean tissue mass (LTM), fat mass (FM), bone mineral content (BMC), and bone mineral density (BMD) in humans and small mammals. Live channel catfish (n=74, 78g - 1200 g) were anesthetized and scanned in both a lateral position and a dorsa-ventral position. Six individual fish (300g - 600g) were scanned five times each to determine precision by the coefficient of variation. Precision was good for LTM (0.75-1.06%) and for BMC and BMD (2-2.6%). Precision for FM was not good (27-34%), which was due to the very low FM (0-1g) recorded by the DXA. However, using the predicted values, FM precision improved to 5-5.5%. DXA values for LTM, FM, and BMC were significantly different from chemical analysis (P< 0.001). DXA overestimated LTM and underestimated FM and BMC. However, all three compartments were strongly correlated with carcass values (P <0.0001). Using the prediction equations and the jackknife procedure, predicted values of LTM, FM, and BMC were not significantly different from the carcass values (P >0.05). DXA may also be a valuable tool for evaluating body condition longitudinally in commercial or in threatened or endangered fish species, where non-invasive procedures would be invaluable.

Visceral fat mass determination in rodent: validation of dual-energy x-ray absorptiometry and anthropometric techniques in fat and lean rats

BackgroundBecause abdominal obesity is predisposed to various metabolic disorders, it is of major importance to assess and track the changes with time of this specific fat mass. The main issue for clinicians or researchers is to use techniques for assessing abdominal fat deposition and its accumulation or changes over time, without sacrificing of experimental subjects. In the rat, techniques to investigate in-vivo visceral fat mass are lacking. The purpose of the study was to validate indirect Dual-energy X-ray Absorptiometry technique and abdominal circumference measurement as tools to predict visceral adipose tissue in rats.Forty-three Wistar male rats from different body weight, fat mass and ages were included in the study. Visceral fat mass was assessed by weighing the total perirenal and peri-epididymal adipose tissues after dissection. Statistical methods were used to discriminate the best region of interest allowing the in-vivo measure of Central Fat Mass by DXA. Abdominal circumference was measured at the same time as the DXA scan.ResultsA region of interest including Central Fat Mass from the whole body DXA scan (extending from L2 to L5 vertebrae), correlated strongly with ex-vivo Fat Mass (r = 0.94, p < 0.001). Abdominal circumference correlated significantly with ex-vivo Fat Mass (r = 0.82, p < 0.001) and Central Fat Mass (0.90, p < 0.001) in the whole group of rats. When dividing the whole group into lean and fat rats, correlations remained significant between Central Fat Mass and ex-vivo Fat Mass but disappeared for the lean group between abdominal circumference and ex-vivo Fat Mass.ConclusionsThis study validates the Central Fat Mass determined by DXA as a non-sacrificial technique to assess visceral fat for in-vivo investigations in rats. The abdominal circumference measure appears useful in studying overweight or obese rats. These two techniques could be convenient tools in follow-up and longitudinal studies.

Validation of dual-energy x-ray absorptiometry and foot-foot impedance against deuterium dilution measures of fatness in children

To determine the validity of estimation of body fatness by dual-energy x-ray absorptiometry (DXA) and foot-foot bio-electrical impedance (BIA). In 176, 11-12-year-olds (84 boys; 92 girls) body fatness was measured using total body water (TBW), derived from deuterium oxide dilution space. Body fatness was also estimated from DXA and BIA. Methods were compared by regression and by Bland-Altman analysis using TBW measures as the reference. In boys, mean fat mass from TBW was 9.8 kg (standard deviation, SD=6.1); bias by DXA estimated fat mass was +0.9 kg (limits of agreement -2.2 to +4.1) and bias for BIA was -5.2 kg (limits of agreement +0.5 to -10.8). In boys, regression analysis indicated significant differences in slope (p<0.001) for DXA, and both slope (p < 0.001) and intercept (p < 0.001) for BIA. In girls, mean fat mass from TBW was 12.1 kg (SD 7.7); bias for DXA was +1.2 kg (limits of agreement -1.9 to +5.1) and bias for BIA was -0.2 kg (limits of agreement -5.4 to +5.1). In girls, regression analysis indicated significant differences for slope and intercept (p<0.001 in all cases) for both DXA and BIA. Errors in estimation of fat mass using BIA and DXA can be very large, and the direction of error can differ between the sexes.

Validation of dual-energy x-ray absorptiometry and foot-foot impedance against deuterium dilution measures of fatness in children

Validation of dual-energy x-ray absorptiometry and foot-foot impedance against deuterium dilution measures of fatness in children

In vivo quantification of fat content in mice using the Hologic QDR 4500A densitometer

Validation of dual-energy X-ray absorptiometry (DXA) with the Hologic QDR 4500A (QDR 4500) Fan Beam X-ray densitometer for in vivo assessment of body fat content in mice. Precision of DXA fat measurement was assessed by repeated in vivo scanning and re-positioning of different sized mice (17.6, 24.6, 34.2 g). DXA fat and total mass measurements were correlated with dissected tissue weights in 240 female adult mice of seven strains (mean weights 21.9-26.8 g). Accuracy of DXA fat tissue measurements was assessed by chemical analysis in a subgroup of 40 female decapitated mice (mean weights 19.6-28.4 g). Precision of the DXA measurements for fat mass was dependent on body weight (mean coefficient of variation, CV, 34.2 g mouse: 7.53 ± 0.13%; 24.6 g mouse: 32.16 ± 0.17%; 17.6 g mouse: 40.64 ± 0.06%). A moderate to high correlation with the dissected fat tissue weights was found for all seven strains: r = 0.52, p ≤ 0.01 (AJ) to r = 0.83, p ≤ 0.01 (CBA, both mean weight = 22 g). The correlation of DXA measurements with the chemical analysis of the carcass was good to excellent (r = 0.80, p ≤ 0.01). The results demonstrate that the QDR 4500A DXA can be utilised for in vivo measurements of fat content in mice weighing as little as 20 g, with excellent correlations between tissue dissections and chemical analysis demonstrating high consistency of the measurements. DXA values were consistently slightly lower than those by direct chemical analysis; however, the limits of agreement (mean difference 0.96 g) demonstrated good concordance between the two methods.

Validation of dual-energy X-ray absorptiometry in live White Leghorns

Dual energy x-ray absorptiometry (DEXA) was evaluated for use as a noninvasive tool to monitor skeletal integrity in live laying hens. The objectives of the current study were 1) to validate the use of DEXA in evaluating bone integrity in live birds as compared with excised bones under a normal nutritional regimen as well as in hens fed varying levels of dietary Ca and 2) to correlate densitometric scans with other bone strength criteria and egg traits. Densitometric scans were conducted on the tibia and humerus of live hens at 10-wk intervals from 17 to 67 wk of age. After each scan, bones were excised from euthanized hens to measure breaking strength characteristics and bone ash (experiment 1). Similar measurements were collected at 38, 48, and 58 wk of age from hens fed hypercalcemic (5.4%), control (3.6%), and hypocalcemic (1.8%) diets from 32 to 58 wk of age (experiment 2). The bone mineral density (BMD) and bone mineral content (BMC) between live and excised bone scans were highly correlated (r = 0.85 and 0.92, respectively, P < 0.0001, experiment 1). Densitometric scans of live birds were positively correlated with bone breaking force and bone ash (r = 0.68 and 0.73, respectively, P < 0.001) with little to no correlation with shell traits. In experiment 2, the excised tibial scan had lower BMD and BMC than the live bird (P < 0.01), whereas no difference was detected in densitometric scans of the humerus. The live and excised BMD and BMC of the tibia (r = 0.87 and 0.82, respectively, P < 0.001) and humerus (r = 0.94 and 0.93, respectively, P < 0.001) were highly correlated. Due to the high correlations between live and excised bone scans and the significant correlations of live scans to more traditional invasive bone measurement tests such as bone breaking force and bone ash, we concluded that DEXA is a useful noninvasive tool for evaluating skeletal integrity in live birds.

Validation of dual-energy x-ray absorptiometry for determining in vivo body composition of chickens

The purpose of this study was to validate dual-energy x-ray absorptiometry (DXA) for measuring the body composition of chickens in vivo. Four trials were conducted with broiler chickens using a DXA instrument (Lunar, DPX-L) and small animal total body scan software (version 4.7a). In the first 2 trials, the effects of scan mode (high resolution or detail slow), scanning position (ventral or dorsal), and the use of attenuating materials (AM) (2-mm polyvinyl chloride or 4-mm polystyrene) on the precision and values of the DXA parameters body mass, lean tissue mass, fat tissue mass and percentage, bone mineral content (BMC), and bone mineral density (BMD) were evaluated. The precision was highest for body mass and lean tissue mass, followed by BMC and BMD, and was lowest for fat tissue mass and percentage. The precision of the measurements was not influenced by scan mode, position, or type of AM. In contrast, the values for all DXA parameters except body mass were significantly influenced by the scan mode but not by the position. The high resolution mode gave significantly higher estimates of fat mass and BMC but significantly lower measures of lean tissue mass and BMD compared with the detail slow mode. A significant difference between AM was only observed for the DXA estimates of fat tissue mass and fat percentage. In trial 3, the accuracy of the DXA measurements was tested by comparison with chemical body composition analysis. Linear regression equations between the respective DXA and chemical parameters were established. High correlations (r > 0.9; P < 0.0001) were obtained for all parameters, except for fat percentage (r = 0.593; P < 0.05). The purpose of the validation trial was to compare the predicted body composition based on the DXA measurements with established equations and the chemical body composition. There was extremely good agreement for body mass, lean tissue mass, and fat tissue mass and percentage, but not for ash weight. It is concluded that, after proper methodological standardization and application of specifically determined regression equations, DXA can be used for estimating the body composition of chickens in vivo. However, the regression equations are strictly limited to one particular instrument, software version, and applied methodology.

VALIDITY OF DUAL-ENERGY X-RAY ABSORPTIOMETRY FOR ASSESSING CHANGES IN FAT-FREE WEIGHT

828 The present study examined the validity of dual-energy x-ray absorptiometry(DXA) for assessing changes in fat-free weight (FFW) following 8 weeks of weight training by comparing the estimates to values obtained from underwater weighing (UWW). Ten, college-age ([horizontal bar over]X age = 19.0 ± 0.7 yr) football players (n=8 Caucasian; n = 2 Black) served as subjects. FFW from DXA was determined using a Hologic QDR-2000 bone densiometer. Validation analyses pre-training (PRTR) and post-training (POTR) included examination of the constant error (CE), SEE, r value and total error (TE). FFW increased significantly by 3.8 kg following the training period (73.8 to 77.6 kg; p < 0.001). FFW from DXA was not significantly different (p > 0.025) from UWW both PRTR (CE = 0.4 kg) and POTR (CE = 0.3 kg) and resulted in TE values of 2.6 and 2.9 kg, respectively. Correlation analyses indicated that the estimated changes in FFW determined by DXA were moderately correlated with actual changes from UWW (r = 0.46). When evaluating individual data, DXA correctly identified the direction of change in all 10 subjects. However, the magnitude of the change (within 1.0 kg) was only correctly identified in five of the subjects. In summary, DXA was as accurate as UWW for assessing changes in FFW. However, it should be noted that there were differences between the methods for monitoring individual changes in FFW.

Measurement of Neonatal Body Composition using Dual-Energy X-ray Absorptiometry (DXA), Magnetic Resonance Imaging and Spectroscopy (MRI/MRS) in Piglets. Part I: Validation of DXA by Chemical Analysis (CA)† 1517

Measurement of Neonatal Body Composition using Dual-Energy X-ray Absorptiometry (DXA), Magnetic Resonance Imaging and Spectroscopy (MRI/MRS) in Piglets. Part I: Validation of DXA by Chemical Analysis (CA)† 1517

Validation and application of dual-energy x-ray absorptiometry to measure bone mass and body composition in small infants

Precision and validity of dual-energy x-ray absorptiometry (DXA) for analysis of whole-body composition in infants were assessed by 1) scanning piglets in triplicate to calculate CVs, and 2) comparing DXA estimates with chemical analysis of whole carcass. The mean CVs for all DXA measures in small piglets and large piglets were < 2.5%, except for fat mass, which were 6.3% and 3.5%, respectively. In large piglets DXA provided reasonable estimates of chemical analysis for bone mineral content (BMC), lean body mass, and fat mass, but only for lean body mass in small piglets. DXA overestimated fat by twofold and underestimated BMC by a third in small piglets. Scans of prematurely born infants (n = 17) at term and at 3, 6, and 12 mo corrected age demonstrated that changes in BMC, lean body mass, and fat mass can be quantitated by DXA. However, further refinement of DXA technology is necessary before reliable measures of BMC and fat mass in small infants are attainable.