UV Vis Absorption Research Articles

Spectral-Sensing System for Distinguishing CH3OH and CD3OD.

Spectrally discriminating CH3OH and CD3OD, and even detecting CH3OH contents in the CD3OD solvent, are important yet have not been achieved so far, likely owing to their very similar chemical/physical properties. Herein, dynamic transesterification reactions, which can be achieved via two-step proton transfers, can be signaled via ultraviolet UV-visible (UV/vis) absorption and fluorescence spectroscopies under mild experimental conditions. Introduction of strong electron-withdrawing groups, such as -NO2, to the aromatic ring (benzoic acid moiety or phenol moiety) of carboxylate esters to activate the esters is important for transesterification reactions and is an intriguing method for modulating the selectivity of the spectral response. The rate constant of the transesterification reaction enhanced with increasing the total number of strong electron-withdrawing groups. Furthermore, the rate constants of esters in which substituent(s) are connected to the phenol moiety are higher than those of corresponding esters in which substituent(s) are connected to the benzoic acid moiety. In transesterification systems, added aliphatic amines mainly play two roles: (i) lowering the energy barrier of the first transesterification step via the formation of intermolecular hydrogen bonding in ternary systems and (ii) deprotonating the released 4-nitrophenol in UV/vis absorption spectral systems to generate an UV/vis absorption spectral signal reporter, i.e., nitrophenolate anions. As a result of the methanol-mediated transesterification reaction, spectral-sensing systems can be established for discriminating CH3OH and CD3OD and even detecting low CH3OH contents in the CD3OD solvent, owing to the kinetic isotope effect. This is the first example of spectral recognition between CD3OD and CH3OH.

Structural, optical and magnetic properties of chemically grown copper oxide nanoparticles: An insight into anticancer activities

Self-assembling nanorods like copper oxide (CuO) nanoparticles (NPs) have been successfully synthesized using two different copper cationic precursors to investigate their structural, optical, and magnetic properties. These NPs are employed in anticancer applications. Both the CuO-NPs have been tested for their toxicity on human cells. The XRD patterns confirm the formation of monoclinic crystal structures for both the systems. The FESEM microstructural surface morphology shows high agglomeration and a typical elemental composition is evaluated from EDAX analysis. The HRTEM analysis reveals high crystalline CuO nanorods with diameters in the range of 60 ∼ 94 nm and 09∼ 22 nm for two different nanoparticles named CuO-NPs1 and CuO-NPs2, respectively. The optical band gap of CuO-NPs has been calculated from UV–visible absorption spectra and is found to be 2.18 eV and 2.55 eV for CuO-NPs1 and CuO-NPs2, respectively. FTIR analysis provides insights into the chemical compositions of both the CuO-NPs. Magnetization study using vibrating sample magnetometer (VSM) indicates antiferromagnetic-like properties associated with weak ferromagnetic behaviour. Cytotoxicity tests on MCF-7 cell lines show that CuO-NPs2 exhibit more pronounced effect with IC50 of 22.95 μg/mL. The toxicity of both the CuO-NPs are also assessed using human lymphocytes, suggesting that CuO-NPs could be promoted as anticancer agents while remaining non-toxic to biological systems.

Comprehensive Review of Synthesis, Optical Properties and Applications of Heteroarylphosphonates and Their Derivatives

This review focuses on optical properties of compounds in which at least one phosphonate group is directly attached to a heteroaromatic ring. Additionally, the synthesis and other applications of these compounds are addressed in this work. The influence of the phosphonate substituent on the properties of the described compounds is discussed and compared with other non-phosphorus substituents, with particular attention given to photophysical properties, such as UV-Vis absorption and emission, fluorescence quantum yield and fluorescence lifetime. Considering the presence of heteroatom, the collected material was divided into two parts, and a review of the literature of the last thirty years on heteroaryl phosphonates containing sulfur and nitrogen atoms in the aromatic ring was conducted.

Functionalizing Thiosemicarbazones for Covalent Conjugation

Thiosemicarbazones (TSCs) with their modular character (thiosemicarbazides + carbonyl compound) allow broad variation of up to four substituents on the main R1R2C=N(1)–NH–C(S)–N(4)R3R4 core and are thus interesting tools for the formation of conjugates or the functionalization of nanoparticles (NPs). In this work, di-2-pyridyl ketone was introduced for the coordination of metals and 9-anthraldehyde for luminescence as R1 and R2 to TSCs. R3 and R4 substituents were varied for the formation of conjugates. Amino acids were introduced at the N4 position to produce [R1R2TSC–spacer–amino acid] conjugates. Further, functions such as phosphonic acid (R–P(O)(OH)2), D-glucose, o-hydroquinone, OH, and thiol (SH) were introduced at the N4 position producing [R1R2TSC–spacer–anchor group] conjugates for direct NP anchoring. Phenyl, cyclohexyl, benzyl, ethyl and methyl were used as spacer units. Both phenyl phosphonic acid TSC derivatives were bound on TiO2 NPs as a first example of direct NP anchoring. [R1R2TSC–spacer–end group] conjugates including OH, S–Bn (Bn = benzyl), NH–Boc (Boc = tert-butyloxycarbonyl), COOtBu, C≡CH, or N3 end groups were synthesized for potential covalent binding to functional molecules or functionalized NPs through amide, ester, or triazole functions. The synthesis of the thiosemicarbazides H2NNH–C(S)–NR3R4 starting from amines, including amino acids, SCCl2 or CS2, and hydrazine and their condensation with dipyridyl ketone and anthraldehyde led to 34 new TSC derivatives. They were synthesized in up to six steps with overall yields ranging from 10 to 85% and were characterized by a combination of nuclear magnetic resonance spectroscopy and mass spectrometry. UV-vis absorption and photoluminescence spectroscopy allowed us to easily trace the dipyridyl imine and anthracene chromophores.

Solvent effect on the excited state photophysics of Imiquimod: A DFT/TD-DFT and spectroscopic study

Solvation plays an important role in chemistry and biology. The role of the solvent is crucial in any chemical processes such as tautomerization that controls the structure and function of biomolecules. The current study aims to explore how different solvent medium affects the tautomeric forms of an antitumor drug, Imiquimod (IMQ). We have used several spectroscopical methods, including UV–Vis absorption spectroscopy, steady-state and time-resolved fluorescence spectroscopy, and quantum mechanical (QM) calculations. Our results revealed that solvent, indeed, plays a significant role in the modulation of the photophysics of the drug. IMQ has three emission bands in protic and aprotic solvents and two bands in non-polar medium associated with different forms of the drug. Using time-resolved technique, and comparing with the predicted lifetimes from QM calculations, we succeed to assign these three forms as cation, tautomer and neutral of IMQ with 1.6 ns, 2.0 ns and 4.0 ns lifetime values, respectively. Since IMQ is a nucleobase analogue and one of the most effective medications for skin tumors; these findings about which specie of IMQ is present in a given medium, and beyond, how the medium alters the photophysics of the molecule may provide deeper insights into its structure and function.

Direct Estimation of Aromatization Energy from 1H NMR and UV-Vis Absorption Data of Homodesmotic Molecules.

This study delves into the ring-opening reaction of two distinct diaryl-ring-pyran systems, referred to as drnp1 and drnp2, where the term 'ring' encompasses aromatic, nonaromatic, or antiaromatic motifs. These systems transform into the corresponding cis-ortho quinonoid systems, denoted as c-drnq1 and c-drnq2. Homodesmotic pairs (drnp1, drnp2) and (c-drnq1, c-drnq2) are categorized as (aromatic, nonaromatic), (aromatic, partially aromatic), (antiaromatic, nonaromatic), and (nonaromatic, nonaromatic), with their energy difference representing aromatization energy (Earoma). Using reliable density functional theory, Earoma is assessed for various aromatic and antiaromatic ring motifs, including borderline cases and nonaromatic structures. For example, benzene exhibits an Earoma of 23.4 kcal/mol, indicating 3.9 kcal/mol aromatic stabilization per CC bond, while cyclobutadiene shows -29.9 kcal/mol, indicating a 7.5 kcal/mol destabilization of the CC bond. This approach extends to evaluating global and local aromatic stabilization effects in polycyclic hydrocarbons, nonbenzenoid systems, and heterocyclic compounds. Additionally, variation in 1H NMR chemical shift (δavg) correlates with Earoma, suggesting that a -1.0 ppm shift corresponds to 24.2 kcal/mol aromatization energy. UV-vis absorption maxima difference (Δλavg) correlates linearly with Earoma, enabling direct assessment of aromatization energy from UV-vis spectra using suitable homodesmotic pairs. This comprehensive approach enhances our understanding of structural, energetic, and spectroscopic aspects of aromatic and antiaromatic systems.

Investigation on special reactivity of sulfite as an electron acceptor for the attenuated Fenton reaction and the abatement mechanism

Sulfur(IV) as a ubiquitous substance in the atmosphere and water bodies can be deliberately involved in different redox reactions based on the known ability to donate electrons, but the inhibition effect on the advanced oxidation processes (AOPs) especially the Fenton reaction, which played a vital role in aerosol aging and pollution treatment, still stayed fuzzy. In this work, it was first found that sulfite had an unexpected reactivity to accept electrons from Fe(II) monitored by the chemiluminescence (CL) method to reduce Fe(II) seriously. Dynamics calculation, UV–vis absorption, HPLC, and CL analysis indicated that sulfite anions can be transferred into SO2·- or dimer S2O42− through reacting with Fe(II). The direct consumption of Fe(II) in Fenton reaction only happened by sulfite among other inorganic anions during degrading different organic pollution, and the produced S2O42− showed an overpowering inhibitory ability on hydroxyl radical especially at pH 5.3, both resulting in a strong inhibition effect on the Fenton reaction. In contrast at pH 3.1, the fast depletion of sulfite by H2O2 and decomposition of S2O42− fell off the inhibition effect. Furthermore, abatement experiments showed that the effect of sulfite could be circumvented by using a non-iron-based oxidation system with other metal ions, additionally clarifying the reaction of Fe(II)-sulfite played the primary role in the inhibition. Significantly, this inhibition effect of sulfite on the Fenton reaction was demonstrated to take place both in the natural wastewater and degrading two acids from biomass burning in the atmosphere, identifying the attenuated Fenton reaction in the presence of sulfur(IV) in the environment

Metal-free internal nucleophile-triggered domino route for synthesis of fused quinoxaline [1,4]-diazepine hybrids and the evaluation of their DNA binding properties

An unprecedented metal-free synthesis of fused quinoxaline 1,5-disubstituted-[1,4]-diazepine hybrids have been reported under mild conditions through a domino intermolecular SNAr followed by an internal nucleophile-triggered intramolecular SNAr pathway. Our strategy offers the flexibility for the introduction of a broad variety of functionalities at the N-1 position of fused diazepine moiety by using suitable diamine tails to design structurally diverse scaffolds. The DNA binding properties of representative quinoxaline diazepine hybrids were studied using UV–vis absorbance and EtBr displacement assay and were found to be governed by the functionalities at the N-1 position. Interestingly, compound 11f containing the N-1 benzyl substitution demonstrated significant DNA binding (KBH ∼ 2.15 ± 0.25 × 104 M−1 and Ksv ∼ 12.6 ± 1.41 × 103 M−1) accompanied by a bathochromic shift (Δλ ∼ 5 nm). In silico studies indicate possible binding of these diazepine hybrid 11f at the GC-rich major groove in the ct-DNA hexamer duplex and showed comparable binding energies to that of ethidium bromide. The antiproliferative activity of compounds was observed in the given order in different cell lines: (HeLa > HT29 > SKOV 3 > HCT116 > HEK293). Lead compound 11f demonstrated maximum cytotoxicity (IC50 value of 13.30 μM) in HeLa cell lines and also caused early apoptosis-mediated cell death in cancer cell lines. We envision that our work will offer newer methodologies for the construction of fused quinoxaline 1,5-disubstituted-[1,4]-diazepine class of molecules.

Nitrated benzothiadiazole-based D-A electrochromic polymers with tunable spectral properties

Nitrated benzothiadiazole (BT) is the promising acceptor units in constructing D-A-D electrochromic polymers, but its researches in the electrochromic field was very limited so far. In this work, four kinds of nitrated polymer precursors (Th-NO2-BT, EDOT-NO2-BT, Th-2NO2-BT, and EDOT-2NO2-BT) were synthesized by Stille coupling reaction with EDOT and thiophene units as the end groups (electron donor units) and mono-nitrated benzothiadiazole and di-nitrated benzothiadiazole as the core groups (electron acceptor units). The chemical structure and optical properties of the precursor were investigated by means of 1H NMR, UV–vis absorption and fluorescence spectra; the corresponding mono-nitrated polymer films were obtained in CH2Cl2-Bu4NPF6 system by electrochemical deposition method. The optical band gap of di-nitrated polymer precursor is obviously larger than the corresponding mono-nitrated polymer precursor (both ultraviolet and fluorescence spectra are obviously blue-shifted), accompanied with the obvious increased initial oxidation potential. Due to the fluorescence quenching effect of -NO2 group, their absolute quantum yields are all very low (0.0006–0.015). The spectroelectrochemistry and electrochromic kinetics of mono-nitrated polymer films (P(Th-NO2-BT) and P(EDOT-NO2-BT)) were studied. It was found that P(EDOT-NO2-BT) can show better electrochromic performance than P(Th-NO2-BT), with dark green in the neutral state and more obvious electrochromic performance in the near-infrared region (optical contrast: 38.4 %, coloration efficiency: 129.1 cm2/C, and fast response time: 1.4 s). This systematically study about the effects of nitro substitution effect on the properties of D-A electrochromic polymers, which will further expand the selection of the new acceptor units and the application prospect of nitrated electrochromic materials.

An inclusive comparison regarding aggregation of surface active ionic liquid and conventional surfactant with a cationic dye Acridine Red exposed in view of spectroscopic and theoretical study

The investigation was conducted on the interaction of acridine red (AR) with sodium dodecyl sulfate (SDS) and 1-butyl-3-methyl imidazolium octyl sulfate (BMImOS) in both premicellar and post micellar concentrations. The interaction between AR and room temperature ionic liquid (RTIL) 1-butyl-3-methyl imidazolium bromide (BMImBr) was studied to understand the effect of imidazolium cation on micellization. Spectroscopic experiments, such as UV–visible absorption spectroscopy, steady-state fluorescence spectroscopy, time-resolved fluorescence spectroscopy, and dynamic light scattering, have been introduced. Various important parameters like spectral shifts, anisotropy, and aggregation number have been determined spectroscopically. However, a fresh insight into density functional theory calculations has also been provided. The observed results have been explained in terms of the aggregation behavior of the amphiphiles. A prominent redshift accompanied by a change in intensity is observed in the presence of surfactant and SAIL. However, in the case of BMImBr, no such spectral shift has been observed; only a decrease in spectral intensity highlights the quenching ability of the imidazolium cation. Average lifetime also provides some additional information regarding the difference in the formation of aggregates by SDS and BMImOS, which is further established from particle size density obtained from DLS. The salt like role of 1-butyl-3-methyl imidazolium cation also has been logically explained by anisotropy measurement and the determination of aggregation number. Using Gauss View 5.0 and Gaussian 09 package, the energy of optimization of each set of amphiphiles along with dye has been determined to follow the interaction at the molecular level. TDDFT calculations have also been performed to determine the structure of HOMO and LUMO.

Synthesis, structure, theoretical calculation and photocatalytic property of a novel Mn(II) supra-molecular compound containing SCN- and 2,2′-bipyridine ligands

A novel supra-molecular compound [Mn(SCN)2(byp)2] 1 (byp = 2,2′-bipyridine) was synthesized under hydrothermal conditions. Noteworthily, the SCN- in the title compound is derived from the in situ reaction of salicylaldehyde thiosemicarbazone. X-ray single-crystal diffraction analysis shows compound 1 is only a mononuclear structure, but it is expanded into a 3D supramolecular structure via H-bonds and π···π stacking. Hirshfeld Surface analysis shows C⋯H, H⋯H and S⋯H interaction are the main contribution of intermolecular interactions in the formation of compound 1. All of title compounds were characterized by IR spectroscopy, elemental analysis, XRD, XPS and TG analysis. The energy framework of compound 1 is dominated by dispersion interaction. The photocatalytic degradation ability of compound 1 for methylene blue is verified by photocatalytic degradation experiments (pH = 4: 44.6 %; pH = 7: 76.2 %; pH = 10: 78.8 %). Furthermore, the potential photocatalytic mechanism of compound 1 is inferred by UV–vis absorption spectra and Mott–Schottky curve.

N-Acetyl Cysteine-Cadmium Telluride NAC-CdTe QDs for Detecting the Damaged DNA in Cancerous Diseases

In this study water-soluble N-Acetyl Cysteine Capped-Cadmium Telluride QDs (NAC/CdTe nanocrystals) using N-acetyl cysteine as a stabilizer were prepared to investigate the utility of quantum dots (QDs) in distinguishing damaged DNA, (extracted from blood samples of leukaemia patients), from intact DNA (extracted from blood samples of healthy individuals) to be used for biosensing application. Based on the optical characterization of the prepared QDs, the XRD results revealed the formation of the NAC-CdTe-QDs with a grain size of 7.1nm. Whereas, the SEM test showed that the spherical size of the NAC-CdTe-QDs lies within 11~33nm. NAC-CdTe-QDs have superior PL emission properties at of 550nm and UV-Vis absorption peak at 300nm. The energy gap measurement through PL and UV–Vis was found to be 2.2eV and 2.3 eV, respectively. The interaction between the synthesized QDs and the extracted genomic DNA (both cancer damaged DNA and healthy undamaged DNA) was analysed optically, and compared to the normal reference DNA. The results showed a shift in the maximum fluorescence emission intensities (observed at 540nm nm for a damaged sample and 535 for a reference cell). Based on the obtained fluorescence results, the present study reached the conclusion that the prepared core/shell QDs could be employed as probes for diagnosing genetically disrupted DNA that is associated with malignant diseases from healthy DNA.

Study on the regulation of ε-CL-20 by an external electric field.

To explore the influence of the external electric field (EEF) on ε-CL-20. The molecular structure, frontier molecular orbitals (FMOs), global reactivity parameters (GRP), surface electrostatic potential, nitro charge, and UV-Vis spectra of ε-CL-20 under EEF were studied using density functional theory (DFT). The calculation results show that the electric field applied along N16-N24 has a significant effect on the structure of ε-CL-20. With an increase in the positive EEF, the bond length of the initiating bond decreases, and the bond order and bond dissociation energy increase, which increases the thermal stability of ε-CL-20 to a certain extent. In addition, with an increase in the positive EEF intensity, the LUMO migrates from both sides of the positive electric field to one side of the nitro group, and the HOMO migrates from the skeleton to the nitro group. It is worth noting that in the negative EEF, when the electric field strength changed from 0 to 0.016 a.u., the negative charge of the total nitro group gradually decreased. When the electric field strength becomes 0.02 a.u., the negative charge of the total nitro group suddenly increases, and ε-CL-20 is significantly polarized. When the electric field strength is sufficiently strong, the occupied and unoccupied orbitals of the ε-CL-20 molecule change, resulting in a change in the energy level difference between the occupied and unoccupied orbitals, which further excites the corresponding excited state, resulting in a new UV-Vis absorption peak. Based on the density functional theory (DFT), the structural optimization and energy calculation were carried out by using B3LYP/6-311 + G(d, p) and B3LYP/def2-TZVPP methods, respectively. After optimization convergence, vibration analysis was performed without imaginary frequencies to obtain stable configurations. Then the molecular structure, frontier molecular orbitals (FMOs), global reactivity parameters (GRP), surface electrostatic potential, nitro charge, and UV-Vis spectra were analyzed.

Tailoring Phage Nanosomes for Enhanced Theranostic Properties of Near Infrared Dyes.

Near-infrared (NIR) phototherapies offer noninvasive, cost-effective solutions for treating tumors and microbial infections. However, organic NIR dyes commonly used suffer from solubility and stability issues requiring frequent dosing. We address this challenge by exploring the bacteriophage-mediated enhancement of NIR dye properties. Upon encapsulation within phage nanosomes, IR780 and Indocyanine green (ICG), with similar optical properties but distinct water solubility and exhibit enhanced UV-vis absorbance and photothermal transduction efficacy compared to liposomes. Experimental characterization corroborated with all-atom molecular dynamics simulations imprints the nanoscale structure, solubility, dynamics, and binding of these NIR dye molecules to the membrane and protein molecules present in Phage capsid. These NIR dye-loaded phage nanosomes, coencapsulated with mitoxantrone, demonstrate enhanced anticancer activity, and when combined with amphotericin B, these dye molecules exhibit superior photothermal effects against fungal infections. Our findings present a simple and efficient approach for tuning the photothermal performance of existing NIR dyes through a rational design for enhanced therapeutic outcomes.

Preparation, structure and optical properties of TCNB-based charge-transfer cocrystals

Organic charge transfer cocrystals exhibit interesting properties due to their multi-components synergistic and collective effect. Herein, using 1,2,4,5-tetracyanobenzene (TCNB) as electron acceptor, carbazole (CARB), dibenzothiophene (DBZP) and dibenzofuran (DBZF) as electron donors, three charge transfer cocrystals of CARB-TCNB, DBZP-TCNB and DBZF-TCNB were synthesized by solvent evaporation method and solvent-assisted grinding method. These cocrystals were constructed based on the π–π stacking interactions and CH…N hydrogen bonds and confirmed by the SXRD analysis. The stacking modes are consistent with the model that predicted by molecular electrostatic potential analysis (ESP). The IGM and AIM analyses suggested that the π-π stacking and CH…N hydrogen bonds are weak in nature. The purity and homogeneity of cocrystals and grinding products were verified by PXRD analysis. In addition, the IR, UV–vis absorption and luminescent properties were investigated, and the cocrystals and grinding products exhibited different behaviors from that of their precures. In short, this work not only reports the CT complexes synthesized by liquid- and solid- strategies, but also provides an in-depth understanding of the spectral changes caused by the CT interactions.

Structural phase transition and optical properties of zero-dimensional cobalt bromide hybrid material

Zero-Dimensional (0D) metal halide materials have recently emerged as a class of potential optoelectronic materials because of the structural diversity and superior photophysical properties. Here we report a 0D cobalt bromide hybrid material, [Br(CH2)3NH3]2CoBr4 (BPA-CoBr4, BPA=Br(CH2)3NH3, 3-Bromopropylamine), in which the isolated metal halide tetrahedron (CoBr42-) is completely separated each other and surrounded by the organic ligand Br(CH2)3NH3+. Differential scanning calorimetry (DSC) measurements exhibit BPA-CoBr4 undergoes a first-order structural phase transition, as clearly visible to a pair of weak peaks at 340 K (heating) and 317 K (cooling). Single crystal X-ray diffractions were carried out at 293 K and 360 K to explain the phase transformation mechanism, indicating it is an isostructural order–disorder type. The crystal structures which both crystalize in a monoclinic P21/c crystal symmetry and the most distinct difference between room-temperature and high-temperature structures is the order–disorder transition of the 3-Bromopropylamine, which is the driving force of the phase transition. The UV–vis absorption spectra reveal that BPA-CoBr4 has a steep absorption edge at 280 nm corresponding to photo energy of 4.4 eV. The density functional theory (DFT) calculations were performed to study the electronic structure with narrower indirect bandgap 3.9 eV which is lower than the experimental values. PDOS plots show that the electronic states of Co-d and Br-p orbitals are mainly contributed for the VBM and CBM of BPA-CoBr4.

Evaluating the role of Er3+ ion on the structural, optical and thermal properties of CaO–ZrO2–Y2O3–B2O3–SiO2 glasses

The present work is involved in synthesizing, characterizing, and evaluating the role of Er3+ ion on structural, optical, and thermal properties of 20CaO–10ZrO2–10Y2O3-30 B2O3-(30-x)SiO2-xEr2O3 (x = 0.3, 0.6, 1.0, and 1.5 mol%) compositions. The as-synthesized samples are characterized by various experimental techniques such as XRD, FTIR, Raman, UV visible spectroscopy, and DSC to study their suitability for optoelectronic applications. The density of glasses increases, whereas the molar volume decreases with the doping of Er2O3 in place of SiO2. The amorphous nature of the prepared samples is confirmed by the X-ray diffraction pattern. FTIR and Raman spectra confirm the presence of BO4 and BO3 structural units in the prepared glass samples. The UV–visible absorption spectra show 4G9/2, 4G11/2, 2G9/2, 4F5/2, 4F7/2, 2H11/2, and 4F9/2 transitions with the Er2O3 doping. The optical band gap increases from 3.25 to 3.61 eV, whereas the refractive index decreases from 2.33 to 2.24 with increasing doping of Er2O3, except for the SE-1.5 glass sample. The molar refraction decreases with Er2O3 doping. The glass transition temperature increases from 472 to 512 °C with Er2O3 doping in place of SiO2, except for the SE-1.5 glass. SE-0.3 glass shows the highest thermal stability, while SE-1.5 glass shows the lowest thermal stability. Therefore, these glasses can be considered for application in optoelectronics.

Synthesis and evaluation of new tetrapyrrole derivatives with photodynamic anti-tumor effects

As a promising anti-tumor method, photodynamic therapy (PDT) has garnered increased interest over the past decades. Since the efficacy of PDT relies on the properties of photosensitizers, tremendous efforts have been exerted in the quest for novel photoactive agents with long wavelength absorbance and high phototoxicity. In this investigation, a series of five tetrapyrrole derivatives were newly synthesized and evaluated. They all manifested sharp UV–vis absorption peak at ∼680 nm, high molar extinction coefficient (>74200 L mol−1 cm−1), impressive reactive oxygen species generation abilities and obvious photo-damage on cancer in vitro and in vivo. Among them, I4 displayed the most excellent singlet oxygen generation slope (K = 0.0531 s−1, ΦΔ = 0.87), the strongest anti-proliferation effects towards human esophageal cancer cell line Eca-109 in vitro, and more remarkable tumor inhibition rates (90.2 %) than m-THPC in vivo. Subcellular localization experiments demonstrated that I4 could distribute in mitochondria, endoplasmic reticulum and lysosomes. Hence, compound I4 could be viewed as a potential photosensitizer drug for further studies in PDT.

DNA/BSA Binding and Antimicrobial Properties of Biguanide-Cu(II) Complexes.

The biguanide Cu(II) complexes [Cu(L1-4)2](ClO4)2 were synthesized and spectroscopic/analytical techniques were used to clarify their structures. Single crystals of complex [Cu(L4)2](ClO4)2 was obtained and its definite structure was determined by single crystal X-ray diffraction study. The complexes [Cu(L1-4)2](ClO4)2 were screened for their FSds-DNA interactions by using UV-Vis absorption and fluorescence spectroscopies. The complexes [Cu(L2)2](ClO4)2 and [Cu(L3)2](ClO4)2 were shown to exhibit higher affinity for binding DNA. Examining the EB-DNA interaction, it is believed that the complexes interact with DNA through a groove binding mechanism. The interaction of complexes with BSA were observed through the quenching of the fluorescence emission. Complexes [Cu(L2)2](ClO4)2 and [Cu(L3)2](ClO4)2 show moderate binding affinity to BSA through a static mode. Additionally, the Cu(II) complexes were screened for their antibacterial activities against various bacterial strains. Complexes showed potential antimicrobial activity against Salmonella typhimurium, Bacillus cereus, Salmonella typhimurium and S. aureus.

Facile one-step synthesis and characterization of MnO nanoneedles and their application in solar photocatalysis

Manganese oxide (MnO) colloidal nanoneedles have been successfully synthesized by a facile one-step method based on the alkaline reaction of the precursor manganese acetate salt and excess sodium hydroxide. X-ray diffraction and FT-IR spectroscopy confirmed the synthesized MnO nanoneedles phase and structure. The optical properties of synthesized MnO nanoneedles were studied by UV–Vis absorption spectroscopy. Optical particle size and band gap of synthesized MnO colloidal nanoneedles were calculated. HR-TEM/SEM images and EDX allow us to determined particle shape and size. The photocatalytic activity of the MnO nanoneedles was evaluated using the Congo red azo dye in an aqueous solution under solar light irradiation. The results showed that nanoneedles, compared with commercial ZnO nanoparticles, exhibited high photocatalytic activity. The photocatalytic studies also showed that various parameters such as band gap, size, shape, and rate constant velocity remarkably affected the remotion rate of Congo red azo dye.