Use Of Phosphate Fertilizers Research Articles

Examining temporal trends in heavy metal levels to analyze sediment pollution dynamics in the Saida urban watershed (N-W Algeria).

The study focuses on current pollution in the Saïda basin, a semi-arid region in north-western Algeria. By analyzing sediments, the study provides interesting results on urban pollution and its environmental impact. The research consists of two main phases, each addressing different aspects of pollution. In the first phase, different pollution indicators are used to analyze heavy metals and organic pollutants in urban drainage sediments. The results are compared with sediment quality guidelines, regulatory thresholds, and local and international references. Most of the metallic contaminants exceed the toxicity levels established by the continental crust and sediment quality guidelines, suggesting an anthropogenic origin. In addition, contamination indices show significant accumulation. In this context, the results highlight the importance of accumulation and transport processes in urban sediments. Hydrological parameters significantly influence heavy metal distribution mechanisms. Remarkable variations between copper (Cu) and lead (Pb) suggest a combined or singular source during transport. Conversely, chromium (Cr), nickel (Ni), and iron (Fe) are mainly derived from natural lithological sources. Cadmium (Cd) is associated with anthropogenic sources related to the agricultural use of phosphate fertilizers, whereas zinc (Zn) is mainly derived from physical corrosion processes. In the second phase, a combined descriptive and multivariate statistical analysis examines the mobility and distribution of heavy metals and their relationships with organic matter (OM) over time. Pronounced temporal variations in Cd, Zn, and Cu concentrations are attributed to human activities. Strong correlations exist between OM and cobalt (Co), Cu and Pb, confirming the ability of OM to adsorb these metals under specific geochemical conditions associated with waste disposal. Conversely, Zn, Cd, Cr, and Ni show weak or negative correlations with OM, suggesting diverse sources, including potential agricultural, industrial, and natural origins. The dendrogram confirms the existence of previously identified contaminant groups, suggesting common sources and potential co-occurrence patterns. This analysis highlights the role of the drainage network as a physico-chemical reactor in the mobilization of contaminants. It underlines the importance of sediment interactions in urban pollution processes. Finally, recommendations are proposed to ensure effective pollution control and remediation. PRACTITIONER POINTS: Useful information on pollution and its environmental impact is provided by the analysis of sediments in the urban basin of Saida (NW-Algeria). The results of this study indicate high levels of heavy metals in the sediments, in excess of toxicity limits, and evidence of anthropogenic sources. Temporal variations in metal concentrations indicate the influence of human activities. The study has made it possible to identify the sources, to understand the mobility and distribution, and to control the contamination by heavy metals in the urban sediments. Drainage system serves as a pathway for dispersing contaminants.

Adjusting Irrigation and Phosphate Fertilizer to Optimize Tomato Growth and Production

The efficient use of phosphate fertilizers and optimization of the amounts of irrigation water can maximize tomato growth and fruit production. This study aimed to evaluate the effects of different phosphorus (P) doses and sources on the growth and production components of tomato plants of the cultivar Gaúcho Melhorado Nova Seleção subjected to different irrigation water percentages. To achieve this, we set up an experiment using a factorial design to test the effects of four doses of P2O5 (corresponding to 25%, 50%, 100%, and 200% of the recommended dose), two P sources (monoammonium phosphate—MAP and organomineral—OM), and four irrigation water percentages (50%, 75%, 100%, and 125% of field capacity). Tomato plant growth improved when water was supplied at a percentage close to 100% of field capacity, with increased plant height, leaf length, and number of flowers observed (increases of 11.95%, 7.33%, and 13.87%, respectively, compared to 50% of field capacity). However, both excess and deficit irrigation resulted in morphological changes in tomato plants. Additionally, we observed that OM was more effective than MAP in increasing plant diameter and number of flowers, with increases of up to 36.4% and 227.6%, respectively, when using OM. Conversely, tomato growth was negatively affected by higher doses of MAP doses, suggesting that 25% of the recommended dose may yield the best growth rates. We verified that tomato plants can compensate for low phosphorus doses by increasing productivity with higher water amounts (125%–42.40 t ha−1), but high phosphorus doses result in greater fruit production with lower water percentages (50%–41.52 t ha−1).

Development of bacteria-based bioorganic phosphate fertilizer enriched with rock phosphate for sustainable wheat production.

Phosphorous (P) is a limiting macronutrient for crop growth. Its deficiency prevents plant development leading to an extensive use of phosphatic fertilizers globally. Bio-organic phosphate (BOP) fertilizer provides a sustainable approach to optimize nutrient availability, enhance crop yield, and mitigate the negative impacts of chemical fertilizers on the environment. Therefore, the present study integrates the application of heat-tolerant phosphate-solubilizing bacteria, rock phosphate, and organic materials for the development of BOP. For this purpose, potential heat-tolerant phosphate-solubilizing bacteria (PSB) were isolated from major wheat-growing areas of southern Punjab. Five isolates were the efficient phosphate solubilizers based on in vitro phosphate-solubilizing activity (291-454 μg ml-1 and 278-421 μg ml-1) with a concomitant decrease in pH (up to 4.5) at 45°C and 50°C, respectively. These PSB were used for the development of potential consortia that are compatible and showed high P solubilization. In planta evaluation of these PSB consortia in a pot experiment under net house conditions showed that consortium-2 had a favorable impact on growth parameter with enhanced grain yield (9.63 g plant-1) and soil available P (10 μg g-1) as compared with 80% uninoculated control. The microcosm study was conducted to evaluate PSB consortium-2 integrated with carrier material (plant material and filter mud) and rock phosphate as BOP increased total phosphorous (14%) as compared with uninoculated controls. Plant-based BOP showed higher viable count (3.5 × 108°CFU) as compared with filter mud-based BOP. Furthermore, the effect of BOP on wheat growth parameters revealed that BOP showed a promising influence on grain yield (4.5 g plant-1) and soil available P (10.7 μg g-1) as compared with uninoculated 80 and 100% controls. Principle component analysis (PCA) further validates a positive correlation between BOP with grain weight and plant height and soil available P as compared with both 80 and 100% controls. For the first time, this study reports the combined application of bio-organic phosphate fertilizer and heat-tolerant PSB, which offers an eco-friendly option to harvest better wheat yield with low fertilizer input.

A Study on Determination of Energy Productivity and Greenhouse Gas Emissions in Wheat Production

In this study, energy use efficiency (EUE) and greenhouse gas emissions (GHG) in wheat production were defined, and the energy equivalents (EE) of the inputs in production per unit production area, EUE and GHG values of the product were computed. The data used in the study were obtained from 175 different wheat producing enterprises in 2021 by conducting face-to-face surveys according to the proportional sampling method. In the study, the amount of direct (DE) and indirect energy (IE) use in wheat production and their shares in total energy consumption were defined. According to the results of the study, total energy input (EI) in wheat production was com-puted as 19,024.21 MJ/ha and energy output (EO) as 80,585.40 MJ/ha. It was defined that the input with the highest energy consumption was fertili-zation with a value of 8748.38 MJ/ha. This was followed by seed energy input 4626.79 MJ/ha (24.32%), fuel energy 2697.25 MJ/ha (14.18%), irriga-tion energy 2362.50 MJ/ha (12.42%), chemicals energy 269.19 MJ/ha (1.41%), machinery energy 309.52 MJ/ha (1.63%), human labor energy 10.58 MJ/ha (0.06%). EUE, energy productivity (EP), specific energy (SE) and net energy (NE) yield values were 4.24, 0.29 kg/MJ, 3.47 MJ/kg and 61561.19 MJ/ha, respectively. Total GHG emission for wheat production was computed as 3784.60 kgCO2-eq/ha. The highest share of total GHG emissions belonged to seed (59.41%). Seed was followed by irrigation (16.84%), nitrogen fertilizer use (14.60%), phosphate fertilizer use (3.99%), fuel use (3.49%), chemicals use (0.98%), machinery use (0.58%) and hu-man labor (0.10%). In addition, the GHG ratio in wheat production was computed as 0.69 kgCO2-eq/ha.

Purification process and mechanism analysis of low-concentration phosphorus wastewater with novel electrodeposition - biochar filter bed

Phosphate‑phosphorus (PO43−-P) is a non-renewable resource. Rapid agricultural activities and inefficient use of phosphate fertilizers contribute to the contamination of natural water resources due to PO43−-P accumulation. PO43−-P recovery in natural water with a low PO43−-P concentration, is conducive to the sustainable utilization of phosphate. Electrodeposition using Ca2+ to recover PO43−-P in natural water has great potential. However, the limitations of low-concentration PO43−-P recovery need to be addressed. This study designed a novel electrodeposition-biochar filter bed (E-BFB) to investigate the removal and recovery ability of PO43−-P at low concentrations. Efficient removal and recovery of PO43−-P was achieved through electrodeposition, biochar adsorption, and accumulation by microorganisms. Effects of different parameters on the performance of E-BFB for PO43−-P removal were studied, including influent PO43−-P concentration, voltage, and electrode spacing. Results showed that 69.4 % PO43−-P was removed when the influent PO43−-P concentration was 0.8 mg/L by E-BFB, as the average removal rate in the biochar filter bed (BFB) was only 11 %. The PO43−-P recovery rate of cathodic electrodeposition was as high as 37.22 %, accounting for 57 % of the total PO43−-P removal amount. The PO43−-P electrodeposition precipitate mainly was amorphous calcium phosphate (ACP) through analysis. 16S rRNA results demonstrated that electrodeposition altered the microbial communities. At the genus level, such as Acinetobacter (26.6 %), Acidocella (11.7 %), and Pelomonas (7.2 %) were promoted in the biochar substrate of E-BFB. Overall, this novel E-BFB can remove PO43−-P at low concentrations effectively. It has great application prospects in the treatment of surface water by biofilters or constructed wetlands.

Emerging role of osmoprotectant glycine betaine to mitigate heavy metals toxicity in plants: a systematic review.

Heavy metals (HMs) toxicity has become one of the major global issues and poses a serious threat to the environment in recent years. HM pollution in agricultural soil is caused by metal mining, smelting, volcanic activity, industrial discharges, and excessive use of phosphate fertilizers. HMs above a threshold level adversely affect the cellular metabolism of plants by producing reactive oxygen species (ROS), which attack cellular proteins. There are different mechanisms (physiological and morphological) adopted by plants to survive in the era of abiotic stress. Various osmoprotectants or compatible solutes, including amino acids, sugar, and betaines, enable the plants to counteract the HM stress. Glycine betaine (GB) is an effective osmolyte against HM stress among compatible solutes. GB has been shown to improve plant growth, photosynthesis, uptake of nutrients, and minimize oxidative stress in plants under HM stress. Additionally, GB increases the activity of antioxidant enzymes such as CAT (catalase), SOD (superoxide dismutase), and POD (peroxidase), which are effective in scavenging unwarranted ROS. Since not all species of plants can naturally produce or accumulate GB in response to stress, various approaches have been explored for introducing them. Plant hormones like salicylic acid, ABA (abscisic acid), and JA (jasmonic acid) co-ordinately stimulate the accumulation of GB inside the cell under HM stress. Apart from the exogenous application, the introduction of GB pathway genes in GB deficient species via genetic engineering also seems to be efficient in mediating HM stress. This review complied the beneficial effects of GB in mitigating HM stress and its role as a plant growth regulator. Additionally, the review explores the potential for engineering GB biosynthesis in plants as a strategy to bolster their resilience to HMs.

Effect of Cadmium on flag leaf morpho-physiological traits in three Mediterranean hulless barley varieties

In Morocco, the use of phosphate fertilizer in farming system represents a source of cadmium that accumulates in soil and would affect negatively the growth and yield. Cadmium toxicity decreases nutrients and water translocation and absorption, it leads to an increase in oxidative harm, affects the metabolism of plants, and inhibits plant morpho-physiology as well. This experiment was conducted to examine the impacts of various concentrations of Cd (0, 15, 30 mg leg-1) in the flag leaf of three hulless barley varieties: Assiya (Morocco), Tombari (Tunisia), and Gizal30 (Egypt). Several morpho-physiological parameters were measured at vegetative stage encompassing measurements like Flag leaf length (FLL), Flag leaf area (FLA), Flag leaf width (FLW), and Flag leaf dry weight (FLDW), water relative content (RWC), total chlorophyll content (SPAD), and Fluorescence (Fv/Fm). ANOVA analysis showed that all morphological traits (except for FLDW) were primarily affected by the variety effect (>62% of total variance). In contrast, the treatment of Cd largely influenced physiological traits (>90% of total variance). Moreover, the interaction between the two factors was in general of lower importance. Comparison among varieties showed significant differences for all traits. In fact, the Moroccan variety (Assiya) displayed the highest values for physiological and morphological parameters.

Dose Estimate of radon radioactive pollutants in samples of phosphate fertilizers and pesticides

Proceeding from the fact that agriculture is a long process of intensification through which society sought to meet its ever-increasing needs for food, and the necessity of countries to meet the needs of their populations, which made them resort to various means to meet these needs and as a result of the steady increase in the use of phosphate fertilizers in particular so that agriculture does not become a cause of exacerbation of environmental pollution with materials Radioactive substances and toxins that pose a significant danger to human life and living organisms, with the accompanying dangerous pathological phenomena. This research measured the concentration of radioactive pollutants in phosphate fertilizers. A s well as analyzing the radon levels in phosphate fertilizers and pesticide samples obtained from marketplaces in Iraq. Radiological parameters were measured using nuclear track detectors to calculate yearly effective exposure levels and the corresponding cancer risk. The acquired data were compared to the UNSCEAR's recommended limits and were determined to be within them.

Optimizing Phosphorus Fertilizer Use on the Loess Plateau: Impact on Soil Properties and Crop Production Efficiency

Various phosphorus (P) fertilizers are commonly utilized in agricultural production on the Loess Plateau. However, there exists a widespread issue of improper matching between P fertilizers, crop types, and soil types. This study proposes a scientifically based approach to managing phosphate fertilizer through a matching experiment. A field experiment was conducted to investigate the effects of different P fertilizers on soil P profiles in a wheat–corn rotation between October 2017 and September 2021. The experiment adopted a randomized block design. P fertilizer was applied as a basal fertilizer at rates of 115 kg P2O5 ha−1 during the wheat season and 90 kg P2O5 ha−1 during the maize season. Nitrogen (N) fertilizer application rates were 120 kg N ha−1 for wheat and 180 kg N ha−1 for maize. N fertilizer was divided into two applications, with 60% applied at pre-planting and 40% at the jointing stage of wheat or the V12 stage of maize. P fertilizer variants utilized in the study included ammonium dihydrogen, ammonium phosphate, calcium-magnesia phosphate fertilizer, calcium superphosphate, and ammonium polyphosphate. The transformation process of phosphate was examined, revealing that the commonly considered dominant diammonium phosphate fertilizer was not the optimal choice in this production system. Ammonium polyphosphate, calcium superphosphate, and ammonium dihydrogen were deemed more suitable for application in Loess soil. Furthermore, an analysis was conducted on the relationship between P fractions, soil properties, and soil Olsen-P. This research emphasizes the significance of strategic phosphate fertilizer use in agriculture to ensure efficient production and to help address the global P scarcity.

Assessment of Environmental Background Gamma Radiation Variation in Minna Area of Nigeria

Radiation has been acknowledged to be responsible for deleterious conditions in living tissues. Hence, environmental background gamma radiation (BGR) measurement is crucial from an environmental and health perspective. In this study, due to the absence of comprehensive background gamma radiation data and the increasing numbers of anthropogenic activities that could increase the BGR level, such as where mining activities are active. The BGR in the Minna area of Niger State, Nigeria, was measured and analyzed in this study. In-situ measurement of the background gamma radiation level was carried out using a well-calibrated portable handheld GQ GMC-500 Plus nuclear radiation detector at an elevation of about 1.0 m above ground level. A global positioning system from Garmin (GPSmap 78s) was adopted for identifying geographical locations. A total of 1172 points were surveyed across the study area for background environmental radiation. The BGR values ranged from 0.102 to 0.147 μSv/h, with an overall mean value of 0.126 μSv/h. The average measured dose rate was more than twice the reported world average value of 0.059 μSv/h. The annual effective dose equivalent (AEDE) for the research area was calculated to be 0.221 mSv/y on average. The mean AEDE is lower than the ICRP recommended limit. This shows that the population of the Minna area is radiologically safe based on the estimated AEDE value. Similarly, the excess lifetime cancer risk (ELCR) value ranged from 0.626 × 10−3 to 0.901 × 10−3 mSv/y with a mean value of 0.774 ± 0.09 × 10−3 mSv/y. The mean value of AEDE is below the 0.24 mSv/y permissible limits as recommended by the International Commission on Radiological Protection (ICRP). The mean ELCR value exceeds the average world value of 0.29 × 10−3. Also, the mean organ dose values estimated for the whole body, liver, kidney, testes, bone marrow, ovaries, and lungs are 0.150 ± 0.02, 0.102 ± 0.01, 0.137 ± 0.02, 0.181 ± 0.02, 0.152 ± 0.02, 0.128 ± 0.02 and 0.141 ± 0.02 mSv/y respectively. The differences in the calculated mean of BGR were attributed to natural and human factors. Geological variation is a fundamental factor that influences the changes in BGR. Human activities, mining, building materials, and the use of phosphate fertilizers in agricultural practices are responsible for the differences in BGR. The ELCR implies that terrestrial gamma radiation does not pose any immediate radiological health effects on residents of the area, but there is a tendency for long-term health hazards in the future, such as cancer, due to the dose accumulated.

Uranium recovery from phosphate rocks/minerals – A comprehensive review

Although the use of nuclear energy is still viewed with caution due to various problems associated, such as the safe operation of 'aging' nuclear plants and the final disposal of nuclear waste, many countries in Europe are now increasingly considering nuclear energy as an alternative to reducing fossil fuel energy production. At the present stage primary sources of uranium are sufficient to meet uranium needs and secondary sources are becoming increasingly important in terms of their long-term availability and environmental friendliness. Mining/recovery of uranium from secondary sources (such as phosphate minerals) is considerably safer in terms of exposure to radiological radiation and therefore requires less stringent safety measures. Uranium is also present in waste produced from certain industrial processes such as fertilizer production industry (e.g. phoshogypsum) and in nuclear waste. This work refers to the extraction and recovery of uranium from phosphate rocks, which is directly related to the production of uranium-free phosphate fertilizers and aims to limit environmental pollution related to the use of phosphate fertilizers. Since the chemistry during the leaching step is critical to efficient uranium recovery, various investigations have been carried to study various parameters that play an important role in achieving an optimum uranium extraction from rocks. Uranium leaching is carried out under acidic or alkaline conditions and the choice of chemistry is determined by the mineralogy of the host rocks. Acid leaching yields a higher recovery than alkaline leaching because the matrix is often more resistant to alkali than to acid leaching. However, the alkaline leaching process has the advantage of leading to the precipitation of a comparatively purer product directly from the leaching liquid. In addition, the washing solutions can be regenerated for further use, making this method more environmentally friendly. Recently alternative methods have been proposed which make use of uranium complexing ligands (e.g. EDTA) to achieve more efficient and selective uranium recovery.

English

Pearl millet can be cultivated in a wide range of soil types under tropical and sub-tropical warm climates. The lack of improved cultivars and non-judicious use of phosphatic fertilizers are among the major reasons for low productivity of pearl millet. The farmers usually apply nitrogen (N); however, do not apply phosphorus (P) fertilizer to pearl millet grown as fodder, which significantly reduces fodder yield. It is assumed that P application can improve fodder yield of pearl millet. Therefore, this two-year (2020 and 2021) field study tested different pearl millet genotypes (i.e., ‘MP-24’, ‘YBS-70’, ‘YBS-86’, ‘YBS-93’, ‘YBS-95’, ‘YBS-98’, ‘18-BY’, ‘14-RS-05’, ‘55-S-85’, and ‘16-RBS-10’) for their fodder production with P fertilization (90 kg ha-1) and no P application (control). Phosphorus application significantly improved growth, fodder yield (24%), P uptake and P use efficiency (PUE) of all tested genotypes with significant differences among genotypes. The genotype ‘YBS-70’ produced the highest fodder yield with P application due to notable expansion in entire growth-related traits along with higher P uptake, P use efficiency (PUE), and net economic returns. The P application to genotype ‘YBS-70’ improved net economic returns (130% and 151% during 2020 and 2021, respectively) and benefit:cost ratio (59% and 61% during 2020 and 2021, respectively) during both years. It is concluded that fodder yield, PUE and profitability of millet may be improved by P application coupled with a suitable genotype. It is recommended that genotype ‘YBS-70’ can be grown with 90 kg ha-1 P application for higher fodder yield. Nevertheless, different P levels must be tested for concrete recommendations for different soil types in various agroecological zones of Pakistan.

Enhanced removing of phosphate ions from agricultural drainage wastewater by using microwave-assisted synthesized attapulgite (Fullers earth) @carboxymethylcellulose nanocomposite

Contamination of various water resources with phosphate pollutant owing to the excessive use of phosphate fertilizers was labeled by dangerous consequences. Most of the water remediation methods are not efficient for phosphate recovery and always generate secondary wastes. Therefore, the current study is aimed to prepare a novel ecofriendly and sustainable APT500@CMC nanocomposite via simple covalent binding of thermally treated attapulgite clay at 500 °C (APT500) with carboxymethyl cellulose (CMC) using microwave irradiation process. The assembled nanocomposite was confirmed by diverse techniques. The optimum conditions for efficient 10, 25 and 50 mg/L PO43− removal were detected at pH 3, time 30 min, temperature 25 °C and mass 200 mg. The kinetic and isotherms were fitted both to a combination of pseudo 1st - 2nd orders and Langmuir model, while thermodynamic parameters verified PO43− removal via spontaneous and exothermic reaction behavior. The mode of interaction and binding of PO43− ions onto the surface of APT500@CMC were suggested via ion-pair interaction process. Excellent PO43− recovery (98.8 %) from real agricultural drainage wastewater was established. The explored APT500@CMC afforded good stability for five regeneration cycles. Therefore, the collected results confirm the validity of APT500@CMC for excellent removal of PO43− from real agricultural drainage wastewater.

A 20-year shift in China's sewage sludge heavy metals and its feasibility of nutrient recovery in land use

Recycling resources from wastewater is even more important for developing a more sustainable society. Disposing sewage sludge, which accumulates most pollutants and resources in sewage, is the main challenge in wastewater pollution control and resource utilization. Heavy metals (HMs) are the greatest constraint limiting the application of sewage sludge to land as a sustainable use of this material. We conducted a meta-analysis of the concentrations of HMs in Chinese sewage sludge by combining data from studies published from 2000 to 2019 (N = 8477). Over this period, the reported concentrations of HMs in sewage sludge declined in three stages (a fluctuating stage, a slight decrease stage, and a rapid and stable decrease stage). The results revealed that economic development and environmental policy implementation were the main factors mitigating HM pollution in sewage sludge in China. Moreover, if environmental regulations were strengthened and HM pollution-mitigation strategies were made consistent, such that the proportion of sewage sludge applied to land in China could be increased from 18.6% to 48.0% (the proportion applied to land in the United States), the ecosystem services analysis showed that huge ecological–economic benefits could be realized (3.1 billion Chinese Yuan) and the use of fertilizers could be substantially reduced (the use of nitrogen fertilizers by 8.5% and the use of phosphate fertilizers by 18.1%). This review shows that China should formulate a unified policy and interdepartmental committee for sustainable application of sewage sludge to land and wastewater resource recycling management.

Potential of root acid phosphatase activity to reduce phosphorus fertilization in maize cultivated in Brazil.

It is urgent to mitigate the environmental impacts resulting from agriculture, especially in highly biodiverse and threatened areas, as the Brazilian Cerrado. We aim to investigate whether root acid phosphatase activity is alternative plant strategies for nutrient acquisition in maize genotypes cultivated under fertilized and unfertilized conditions in Brazil, potentially contributing to reducing the use of phosphate fertilizers needed for production. Three experiments were performed: the first was conducted in a glasshouse, with 17 experimental maize inbred lines and two phosphorus (P) treatments; the second in the field, with three maize inbred lines and two treatments, one without fertilization and another with NPK fertilization; and the third was also carried out in the field, with 13 commercial hybrids, grown either under NK or under NPK treatment. Plant variables were measured and tested for the response to fertilization, differences amongst genotypes and response to root acid phosphatase activity. The activity of root acid phosphatase was modulated by the availability of P and nitrogen (N) in the soil and promoted grain filling of commercial hybrids in soils with low P availability. These results demonstrate that it is possible to select genotypes that are more adapted to low soil P availability aiming at organic production, or to use genotypes that have high phosphatase activity under P fertilization to reduce the amount of added P needed for maize production in Brazil.

Integrating genome-wide association study with transcriptomic data to predict candidate genes influencing Brassica napus root and biomass-related traits under low phosphorus conditions

BackgroundRapeseed (Brassica napus L.) is an essential source of edible oil and livestock feed, as well as a promising source of biofuel. Breeding crops with an ideal root system architecture (RSA) for high phosphorus use efficiency (PUE) is an effective way to reduce the use of phosphate fertilizers. However, the genetic mechanisms that underpin PUE in rapeseed remain elusive. To address this, we conducted a genome-wide association study (GWAS) in 327 rapeseed accessions to elucidate the genetic variability of 13 root and biomass traits under low phosphorus (LP; 0.01 mM P +). Furthermore, RNA-sequencing was performed in root among high/low phosphorus efficient groups (HP1/LP1) and high/low phosphorus stress tolerance groups (HP2/LP2) at two-time points under control and P-stress conditions.ResultsSignificant variations were observed in all measured traits, with heritabilities ranging from 0.47 to 0.72, and significant correlations were found between most of the traits. There were 39 significant trait–SNP associations and 31 suggestive associations, which integrated into 11 valid quantitative trait loci (QTL) clusters, explaining 4.24–24.43% of the phenotypic variance observed. In total, RNA-seq identified 692, 1076, 648, and 934 differentially expressed genes (DEGs) specific to HP1/LP1 and HP2/LP2 under P-stress and control conditions, respectively, while 761 and 860 DEGs common for HP1/LP1 and HP2/LP2 under both conditions. An integrated approach of GWAS, weighted co-expression network, and differential expression analysis identified 12 genes associated with root growth and development under LP stress. In this study, six genes (BnaA04g23490D, BnaA09g08440D, BnaA09g04320D, BnaA09g04350D, BnaA09g04930D, BnaA09g09290D) that showed differential expression were identified as promising candidate genes for the target traits.Conclusion11 QTL clusters and 12 candidate genes associated with root and development under LP stress were identified in this study. Our study's phenotypic and genetic information may be exploited for genetic improvement of root traits to increase PUE in rapeseed.

Test the Adaptability of Several Soybean (Glycine Max L) F5 Strains with TSP Fertilizer

Growth and production strains need to be capability tested in many different environmental conditions. The research aims to obtain efficient strains against the use of phosphate fertilizer and obtain the best dose of TSP fertilizer for the growth and production of soybean strains. The study used the two-factor Factorial Group Randomized Design (RAKF) method. The first factor is the dose of TSP fertilizer with 3 levels, namely P1=25 kg/ha, P2=50 kg/ha, P3=75 kg/ha.The second Factor with 5 levels, treatments were obtained and repeated 3 times. The plot area is 1mx2m with a planting distance of 20 cm x 25 cm. Plant maintenance is carried out by spraying insecticides Decis 25 EC and Dithane. The variables observed were plant height (cm), number of productive branches (branches), number of pods per plant (pods), seed weight per plant (g), seed weight per plot (g), weight of 100 seeds (g). Data were analyzed with a 95% confidence level BNT test using SPSS 26. The results showed that the F5 strain is the most efficient strain in using TSP fertilizer is the G4 = F5-A-T-SSD-84 strain with a dose of 25 kg/ha or 75g/plot to produce planting seed weight 27.76g. TSP fertilizer dose of 75 kg/ha is the best dose to produce the highest planting seed weight

Tracing the sources and transport of the total phosphorus in the upper Yangtze River

Deterioration of water quality is a significant challenge in basin management, posing a serious threat to global water security. In this study, a water quality model named Spatially Referenced Regressions on Watershed Attributes (SPARROW) was applied to quantify the total phosphorus (TP) loads from different sources and investigate the transport processes for the entire upper Yangtze River Basin. The results showed that the phosphate fertilizer use was the main source of TP loads (67.7%), followed by livestock and poultry breeding source (17.6%), point source (10.5%), and rural life source (4.2%), and the phosphorus fertilizer use source dominated the overall spatial distribution pattern of the TP loads. The transport of the TP loads was further traced, and the results showed that 30% of TP loads were retained in the upper reaches of Yangtze River. A total of 7.4% of the river reaches exceeded the water quality management standards, and they could be restored by reducing 60% of phosphate fertilizer use and point sources in their sub-basins according to scenario simulations. Results revealed that controlling TP sources was effective to improve water quality. This study provides a reference for accurately controlling nutrients in other river basins.

Assessment of health hazard due to fluoride in groundwater from a rural area in east‐coast of India and remedial measures

AbstractThe present research deals with the quantification of health hazard in a fluorosis prone area from east‐coast of India. The average health hazard quotients are 2.09, 2.42, 1.79, and 1.69 for infants, children, male, and female adults, respectively. These values are more than the tolerance limit (1) in 92% groundwater samples and 96% of the study area. The children are more vulnerable to fluorosis than infants and adults. Ca2+/ Na+ versus HCO3−/Na+ and Ca2+/Na+ versus Mg2+/Na+ plots suggest silicate weathering as the prime factor while linear relationship of TDS versus NO3− + (Cl−/HCO3−) supports the anthropogenic input of F− to the aquifer system. The study suggests that the F− ions are chiefly derived from fluorite, apatite, biotite, and hornblende present in the granitic basement under alkaline environment. The secondary sources are domestic and industrial sewage as well as return flow from irrigation with ingredients of phosphate fertilizers. The adverse effects of fluorosis can be minimized by mass awareness programmes, alternative source of potable drinking water, defluoridation techniques, dilution of high F− concentration in groundwater, and minimizing the use of phosphate fertilizers.

Economic viability of irrigated cultivation of table cassava cultivars under phosphate fertilization

Phosphate fertilization of cassava cultivars leads to increased production costs that may be economically viable depending on the quantity used and the corresponding productivity. In this sense, the objective of the work was to analyse the economic viability of the irrigated cultivation of table cassava cultivars in response to the application of phosphorus doses in the Brazilian semiarid region. Two agricultural crops were conducted at the Experimental Farm Rafael Fernandes, Mossoró, RN, from June 2018 to April 2019 and from June 2019 to April 2020. The experimental design was in randomized blocks arranged in subdivided plots, with four replications. The doses of phosphorus (0, 60, 120, 180, and 240 kg ha-1 of P2O5) were applied to the plots and the table cassava cultivars (Água Morna, BRS Gema de Ovo, Recife and Venâncio) arranged in the subplots. The total costs for one hectare of cultivation were estimated and the gross income, net income, rate of return, and profitability index were calculated. The use of phosphate fertilizer was economically viable for the cassava cultivars studied in the two crops. The cultivars Água Morna, BRS Gema de Ovo, and Recife are the best cultivation options for the semiarid region of Rio Grande do Norteas they give high yields with the highest profitability. The Recife cultivar was the region's most profitable cultivation, with a profit ranging from R$ 40,331.07 ha-1 to R$ 57,603.46 ha-1 in both seasons, with an average recommendation of 120 kg ha-1 of P2O5.