Use Of Optical Fiber Bundles Research Articles

Highly miniaturized endoscopic spatial confocal point distance sensor

We present a highly miniaturized endoscopic point distance sensor based on a spatial confocal measurement principle.1 The sensor uses a new technique called spatial confocal point distance measurement. A special feature of the proposed sensor design is the high degree of miniaturization through femtosecond direct laser writing and the use of optical fiber bundles, which enable an endoscopic application. We show the complete sensor measurement principle, sensor head design, experimental setup, and experimental results.

Use of optical fiber bundle in digital image plane holography

Use of optical fiber bundles (OFBs) in digital image plane holography systems is limited due to, first, poor quality of transmitted images through the OFB and, second, further image degradation caused by overlappings in the image (also hologram) plane. Existing systems are aimed at near-distant (order of a centimeter) objects and use demanding procedures to achieving acceptable quality of holographic reconstructions. This paper presents an OFB based holographic system capable of achieving fast and good-quality holographic and interferometric reconstructions of far-distant (order of a meter) objects. The proposed system is based on performing subtraction operations through the image acquisition interface buffers directly accessed to process the holograms and instantly display the output. The system is analyzed theoretically and its effectiveness is validated by experimental results.

The use of optical fiber bundles combined with electrochemistry for chemical imaging.

The present Review describes the progress made in using imaging optical fiber bundles for fluorescence and electrochemical-initiated chemiluminescence imaging. A novel optoelectrochemical micro-ring array has been fabricated and demonstrated for concurrent electrochemical and optical measurements. The device comprises optical fibers coated with gold via electroless gold deposition and assembled in a random array format. The design yielded an array of approximately 200 micro-ring electrodes, where interdiffusional problems were minimized. The inner diameter of the ring electrode is fixed by the diameter of the individual optical fibers (25 microns), while the outer radius is determined by the thickness of the deposited gold. While all the fibers are optically addressable, they are not all electrochemically addressable. The resolution of this device is in the tens of micrometers range, determined by the diameter of the optical fiber (25 microns) and by the spacing between each electrically connected fiber. For the purpose of having well-behaved microelectrode characteristics, this spacing was designed to be larger than 60 microns. The array was characterized using ferrocyanide in aqueous solution as a model electroactive species to demonstrate that this microelectrode array format exhibits steady-state currents at short response times. This device has potential application to be used as an optoelectronic sensor, especially for the electrolytic generation and transmission of electrochemiluminescence, and was used to demonstrate that electrochemically generated luminescent products can be detected with the fiber assembly.