Use Of Noble Metals Research Articles

Dry Reforming of Methane on Low‐Loading Rh Catalysts

Dry reforming of methane (DRM) is a promising catalytic process for converting greenhouse gases (CH4 and CO2) into syngas (CO and H2). This study investigates DRM under moderate conditions (550 °C) using supported ultra‐low loading (0.05 wt%) metal (M) catalysts (M = Rh, Ru, Pt, Pd, Ir, Au, and Ni). The reaction was carried out for 6 h with a flow rate of 30 mL/min for both CH4 and CO2, using 0.10 g of catalyst. Among these catalysts, 0.05 wt% Rh/Al2O3 exhibited the highest DRM activity. The effect of catalyst supports revealed that Al2O3 is the most effective support for 0.05 wt% Rh. The DRM activity of Rh species supported on Al2O3 and SiO2 was compared, and the Rh species on Al2O3 outperformed those on SiO2, indicating Al2O3 enhances the DRM activity of Rh. When comparing the DRM activity of Rh nanoparticles and Rh single atoms, it was suggested that Rh nanoparticles might exhibit superior performance for DRM. Coke deposited on 0.05 wt% Rh/Al2O3 is removed by CO2, maintaining stable catalytic activity. These findings provide valuable insights into the design of catalysts that minimize the use of noble metals in DRM reactions.

Electrothermal Conversion of Methane to Methanol at RoomTemperature with Phosphotungstic Acid.

Traditional methods for the aerobic oxidation of methane to methanol frequently require the use of noble metal catalysts or flammable H2-O2 mixtures. While electrochemical methods enhance safety and may avoid the use of noble metals, these processes suffer from low yields due to limited current density and/or low selectivity. Here, we design an electrothermal process to conduct aerobic oxidation of methane to methanol at room temperature using phosphotungstic acid (PTA) as a redox mediator. When electrochemically reduced, PTA activates methane with O2 to produce methanol selectively. The optimum productivity reaches 29.45 [[EQUATION]] with approximately 20.3% overall electron yield. Under continuous operation, we achieved 19.90 [[EQUATION]] catalytic activity, over 74.3% methanol selectivity, and 10 hours durability. This approach leverages reduced PTA to initiate thermal catalysis in solution phase, addressing slow methane oxidation kinetics and preventing overoxidations on electrode surfaces. The current density towards methanol production increased over 40 times compared with direct electrochemical processes. The in-situ generated hydroxyl radical, from the reaction of reduced PTA and oxygen, plays an important role in the methane conversion. This study demonstrates reduced polyoxotungstate as a viable platform to integrate thermo- and electrochemical methane oxidation at ambient conditions.

Electrothermal Conversion of Methane to Methanol at Room Temperature with Phosphotungstic Acid

Traditional methods for the aerobic oxidation of methane to methanol frequently require the use of noble metal catalysts or flammable H2‐O2 mixtures. While electrochemical methods enhance safety and may avoid the use of noble metals, these processes suffer from low yields due to limited current density and/or low selectivity. Here, we design an electrothermal process to conduct aerobic oxidation of methane to methanol at room temperature using phosphotungstic acid (PTA) as a redox mediator. When electrochemically reduced, PTA activates methane with O2 to produce methanol selectively. The optimum productivity reaches 29.45 [[EQUATION]] with approximately 20.3% overall electron yield. Under continuous operation, we achieved 19.90 [[EQUATION]] catalytic activity, over 74.3% methanol selectivity, and 10 hours durability. This approach leverages reduced PTA to initiate thermal catalysis in solution phase, addressing slow methane oxidation kinetics and preventing overoxidations on electrode surfaces. The current density towards methanol production increased over 40 times compared with direct electrochemical processes. The in‐situ generated hydroxyl radical, from the reaction of reduced PTA and oxygen, plays an important role in the methane conversion. This study demonstrates reduced polyoxotungstate as a viable platform to integrate thermo‐ and electrochemical methane oxidation at ambient conditions.

Efficient Electrocatalysts for Alkaline Oxygen Evolution Reaction from Wolframite Derived Heteroatom Materials

AbstractNew materials for oxygen evolution reaction (OER) electrocatalysts in alkaline conditions have been highly investigated in recent years for the advancement of water splitting. However, questions such as the lack of stability and the use of noble metals as electrocatalysts still need to be addressed. In this study, we report the synthesis and electrocatalytic properties of a series of wolframite tungsten‐based materials (MWO4, M=Fe, Mn, Ni, Co) towards OER in basic conditions. Our results showed that Ni0.5Mn0.5WO4 is a promising electrocatalyst, exhibiting ease of preparation, stability over the course of our experiments, and OER activity comparable to the standard iridium oxide. This study highlights the potential of wolframite tungsten‐based materials as a new class of electrocatalysts for OER in alkaline conditions.

Construction of Ru-doped Co nanoparticles loaded on carbon nanosheets in-situ grown on carbon nanofibers as self-supported catalysts for efficient hydrogen evolution reaction

Exploring efficient and economical electrocatalysts to replace noble metal electrocatalysts has become a major research focus nowadays. In this paper, Ru-doped Co nanoparticles loaded on carbon nanosheet (CNS) in-situ grown on carbon nanofibers (Ru–Co@CNS/CNFs) were constructed as a self-supporting working electrode for high-efficiency hydrogen evolution. The prepared Ru–Co@CNS/CNFs possessed excellent catalytic activity with only 78 mV overpotential at 10 mA cm−2 current density and good stability with only 102 mV voltage attenuation at 100 mA cm−2 current density for 100 h continuous operation. The excellent catalytic performance could be attributed to the unique microstructure of the nanosheets in-situ grown on the nanofibers, it resulted in a higher Co surface density of 1.28 mg cm−2, indicating more loading of metal to improve catalytic activity of HER, and the formed Ru-doped Co nanoparticles could be evenly distributed on the carbon nanosheets to prevent the aggregation of nanoparticles, which could expose more active sites. Additionally, the density functional theory (DFT) calculations revealed Ru doping could accelerate the dissociation of water, optimize the adsorption energy of hydrogen intermediates and improve the kinetics of the HER reaction. This work provides a new approach to reduce the use of noble metals while improving the catalytic performance of catalysts.

Catalytic activity of Zr/CeO2-Al2O3 catalyst for diesel soot oxidation: synthesis, characterization, and performance evaluation.

Diesel soot is a significant contributor to air pollution. Soot particles present in diesel engine exhaust have a negative impact on the environment and human health. Diesel oxidation catalysts (DOCs) and diesel particulate filters (DPFs) currently use noble metal-based catalysts for soot oxidation. Due to the use of noble metals in the catalyst, the cost of diesel after-treatment systems is steadily rising. As a result, diesel vehicles have become commercially less viable than gasoline vehicles and electronic vehicles. The study focuses on an alternative diesel oxidation catalyst with efficiency similar to that of a noble metal catalyst but with a much lower cost. CeO2-Al2O3 catalysts are known for their oxygen storage capacity and high redox activity, making them suitable for soot oxidation. Adding Zr to these catalysts has been shown to influence their structural and chemical properties, significantly affecting their catalytic behavior. Therefore, the current study is focused on using Zr/CeO2-Al2O3 as a substitute for noble metal-based catalysts to enhance its performance for diesel soot oxidation in automotive exhaust. Evaporation-induced self-assembly (EISA) was used to prepare 1, 3, and 5 weight (wt) % Zr supported mesoporous CeO2-Al2O3 catalysts. Morphological, structural, and physicochemical properties of the synthesized catalysts were examined using Brunauer-Emmett-Teller (BET) absolute isotherm, Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Temperature programmed reduction (TPR), and Temperature-programmed desorption of ammonia (NH3-TPD). XRD, BET, and SEM data confirmed that the catalysts were mesoporous and low-crystalline with a high surface area. The soot oxidation activity of the catalysts was evaluated using a thermogravimetric analysis (TGA) technique. The loose contacts soot oxidation activity test suggested that 50% oxidation of soot occurred at 390°C in the absence of a catalyst. T50 of CeO2-Al2O3 catalyzed soot oxidation was 296°C. Adding Zr to the catalyst significantly improved catalytic activity for diesel soot oxidation. We observed a further drastic change in T50 of soot over 1, 3, and 5% Zr/CeO2-Al2O3, which were 220°C, 210°C, and 193°C, respectively. According to these results, incorporating Zr into the CeO2-Al2O3 catalyst significantly improved the oxidation process of soot.

Noble Metal Nanoparticle‐Based Aptasensors: A Powerful Tool for Exosomal Detection

AbstractExosomes, secreted by various types of cells, play a crucial role in cell‐to‐cell communication by transporting essential molecular cargos that largely mirror the pathophysiological attributes of their parent cells. Increasing evidence has shown that exosomes emerge as the reliable early biomarkers for different diseases. Clearly, exosomal detection with a high sensitivity and specificity becomes highly essential to advance the understanding of disease progression and to develop early diagnostic modalities. Among different types of biosensors, aptasensors have received significant attention as the diagnostic tools considering their programmability and targeting ability. Noble metal nanomaterials possess distinctive physicochemical properties, allowing for ready functionalization with aptamers via both physical adsorption and chemical immobilization. By utilizing the aptamers as the recognition elements, noble metal nanoparticle‐based aptasensors offer a promising platform for rapid, cost‐effective, and sensitive in situ detection of exosomes. In this review, the progress will summarized in exosomes as a biomarker for diseases and the recent advances in the use of noble metal nanoparticle/aptamer‐based sensors for analysis of exosomes and other extracellular vesicles.

Reduction of (100)-Faceted CeO2 for Effective Pt Loading.

Although the function and stability of catalysts are known to significantly depend on their dispersion state and support interactions, the mechanism of catalyst loading has not yet been elucidated. To address this gap in knowledge, this study elucidates the mechanism of Pt loading based on a detailed investigation of the interaction between Pt species and localized polarons (Ce3+) associated with oxygen vacancies on CeO2(100) facets. Furthermore, an effective Pt loading method was proposed for achieving high catalytic activity while maintaining the stability. Enhanced dispersibility and stability of Pt were achieved by controlling the ionic interactions between dissolved Pt species and CeO2 surface charges via pH adjustment and reduction pretreatment of the CeO2 support surface. This process resulted in strong interactions between Pt and the CeO2 support. Consequently, the oxygen-carrier performance was improved for CH4 chemical looping reforming reactions. This simple interaction-based loading process enhanced the catalytic performance, allowing the efficient use of noble metals with high performance and small loading amounts.

Self-Supported WO3@RuO2 Nanowires for Electrocatalytic Acidic Water Oxidation.

Developing catalysts with high catalytic activity and stability in acidic media is crucial for advancing hydrogen production in proton exchange membrane water electrolyzers (PEMWEs). To this end, a self-supported WO3@RuO2 nanowire structure was grown in situ on a titanium mesh using hydrothermal and ion-exchange methods. Despite a Ru loading of only 0.098 wt %, it achieves an overpotential of 246 mV for the oxygen evolution reaction (OER) at a current density of 10 mA·cm-2 in acidic 0.5 M H2SO4 while maintaining excellent stability over 50 h, much better than that of the commercial RuO2. After the establishment of the WO3@RuO2 heterostructure, a reduced overpotential of the rate-determining step from M-O* to M-OOH* is confirmed by the DFT calculation. Meanwhile, its enhanced OER kinetics are also greatly improved by this self-supported system in the absence of the organic binder, leading to a reduced interface resistance between active sites and electrolytes. This work presents a promising approach to minimize the use of noble metals for large-scale PEMWE applications.

Dissolution-Induced Surface Reconstruction of Ni0.95Pt0.05Si/p-Si Photocathode for Efficient Photoelectrochemical H2 Production.

Metal silicide/Si photoelectrodes have demonstrated significant potential for application in photoelectrochemical (PEC) water splitting to produce H2. To achieve an efficient and economical hydrogen evolution reaction (HER), a paramount consideration lies in attaining exceptional catalytic activity on the metal silicide surface with minimal use of noble metals. Here, this study presents the design and construction of a novel Ni0.95Pt0.05Si/p-Si photocathode. Dopant segregation is used to achieve a Schottky barrier height as high as 1.0eV and a high photovoltage of 420mV. To achieve superior electrocatalytic activity for HER, a dissolution-induced surface reconstruction (SR) strategy is proposed to in situ convert surface Ni0.95Pt0.05Si to highly active Pt2Si. The resulting SR Ni0.95Pt0.05Si/p-Si photocathode exhibits excellent HER performance with an onset potential of 0.45V (vs RHE) and a high maximum photocurrent density of 40.5mAcm-2 and a remarkable applied bias photon-to-current efficiency (ABPE) of 5.3% under simulated AM 1.5 (100mWcm-2) illumination. The anti-corrosion silicide layer effectively protects Si, ensuring excellent stability of the SR Ni0.95Pt0.05Si/p-Si photoelectrode. This study highlights the potential for achieving efficient PEC HER using bimetallic silicide/Si photocathodes with reduced Pt consumption, offering an auspicious perspective for the cost-effective conversion of solar energy to chemical energy.

Amorphous RuPd bimetallene for hydrogen evolution reaction in acidic and alkaline conditions: a first-principles study.

Metallene materials can provide a large number of active catalytic sites for the efficient use of noble metals as catalysts for hydrogen evolution reaction (HER), whereas the intrinsic activity on the surface is insufficient in crystal phase. The amorphous phase with an inherent long-range disorder can offer a rich coordinate environment and charge polarization on the surface is proposed for promoting the intrinsic catalytic activity on the surface of noble metals. Herein, we designed an amorphous RuPd (am-RuPd) structure by the first principles molecular dynamics method. The performance of the acidic HER on am-RuPd can have a huge enhancement due to the free energy change of hydrogen adsorption close to zero. In alkaline conditions, the H2O dissociation energy barrier on am-RuPd is just 0.49 eV, and it is predicted that the alkaline HER performance of am-RuPd will largely exceed that of Pt nanocrystalline sheets. This work provides a strategy for enhancing the intrinsic catalytic activity on the surface and a way to design an efficient HER catalyst based on metallene materials used in both acidic and alkaline conditions.

Hydrothermal nickel selenides as efficient electrodes in alkaline media: application to supercapacitors and the methanol oxidation reaction.

The advancement of active electrochemical materials is pivotal for enhancing energy conversion and storage technologies, which is essential for a sustainable future. Furthermore, achieving cost-effective technologies necessitates avoiding the use of noble metals and low-throughput processes that require high vacuum or high temperatures. Herein, we describe in detail a simple solution-based protocol to obtain a series of phase-controlled nickel selenide nanomaterials. The electrochemical performance of these materials, influenced by the phase and morphology, has been further analyzed. To showcase the application of these materials, two technologies are considered: (i) supercapacitors; and (ii) the methanol oxidation reaction (MOR). In particular, the Ni3Se4-based electrode in 1 M KOH shows an initial specific capacitance of 1903.5 F g-1 at a discharge current of 0.1 mA and displays a notable stability for over 3000 cycles. Furthermore, in an alkaline medium with methanol, this electrode produces a current density of 95.5 mA cm-2, facilitating methanol-to-formate conversion with a faradaic efficiency of up to 95.7% during a continuous 20-hour test. This research underscores the potential of nickel selenide nanomaterials in driving the next generation of energy storage and conversion technologies.

A stable N-doped NiMoO4/NiO2 electrocatalyst for efficient oxygen evolution reaction.

Recently, there has been a significant interest in the study of highly active and stable transition metal-based electrocatalysts for the oxygen evolution reaction (OER). Non-noble metal nanocatalysts with excellent inherent activity, many exposed active centers, rapid electron transfer, and excellent structural stability are especially promising for the displacement of precious-metal catalysts for the production of sustainable and "clean" hydrogen gas through water-splitting. Herein, efficient electrocatalyst N-doped nickel molybdate nanorods were synthesized on Ni foam by a hydrothermal process and effortless chemical vapor deposition. The heterostructure interface of N-NiMoO4/NiO2 led to strong electronic interactions, which were beneficial for enhancing the OER activity of the catalyst. Excellent OER catalytic activity in 1.0 M KOH was shown, which offered a small overpotential of 185.6 mV to acquire a current density of 10 mA cm-2 (superior to the commercial benchmark material RuO2 under the same condition). This excellent electrocatalyst was stable for 90 h at a constant current density of 10 mA cm-2. We created an extremely reliable and effective OER electrocatalyst without the use of noble metals by doping a nonmetal element with nanostructured heterojunctions of various active components.

Efficient orange and red thermally activated delayed fluorescence materials based on 1,8-naphthalimide derivatives.

Thermally activated delayed fluorescence (TADF) molecules have emerged as a promising class of third-generation organic light-emitting diode (OLED) emitters that can achieve 100% internal quantum efficiency without the use of noble metals. However, the design of high-efficiency red TADF materials has been challenging due to limitations imposed by the energy-gap law. To overcome this challenge, two new TADF emitters, namely, 6-(4-(diphenylamino)phenyl)-2-phenyl-1H-benzo[de]isoquinoline-1,3(2H)-dione (NI-TPA) and 6-(10H-phenothiazin-10-yl)-2-phenyl-1H-benzo[de]-isoquinoline-1,3(2H)-dione (NI-Pz), have been synthesized and characterized. These compounds exhibit strong TADF characteristics with a small energy gap (ΔEST) between the lowest excited singlet and triplet states, short delayed fluorescence lifetimes, high thermal stability, and high photoluminescence quantum yields. The OLED devices fabricated using NI-TPA and NI-Pz as emitters show orange and red electroluminescence with emission peaks at 593 nm and 665 nm, respectively, and maximum external quantum efficiencies (EQEs) of 11.3% and 7.6%, respectively. Furthermore, applying NI-TPA to cell imaging yielded excellent imaging results, indicating the potential of red TADF materials in the field of biological imaging.

Surface modification of carbon nanotubes and their nanocomposites for fuel cell applications: A review

<abstract> <p>Carbon nanotubes (CNTs) have drawn great attention as potential materials for energy conversion and storage systems such as batteries, supercapacitors, and fuel cells. Among these energy conversion and storage systems, the fuel cells had stood out owing to their high-power density, energy conversion efficiency and zero greenhouse gasses emission. In fuel cells, CNTs have been widely studied as catalyst support, bipolar plates and electrode material due to their outstanding mechanical strength, chemical stability, electrical and thermal conductivity, and high specific surface area. The use of CNT has been shown to enhance the electrocatalytic performance of the catalyst, corrosion resistivity, improve the transmission performance of the fuel cell and reduce the cost of fuel cells. The use of CNTs in fuel cells has drastically reduced the use of noble metals. However, the major drawback to the utilization of pristine CNTs in fuel cells are; poor dispersion, agglomeration, and insolubility of CNTs in most solvents. Surface engineering of CNTs and CNT nanocomposites has proven to remarkably remedy these challenges and significantly enhanced the electrochemical performance of fuel cells. This review discusses the different methods of surface modification of CNTs and their nanocomposite utilized in fuel cell applications. The effect of CNTs in improving the performance of fuel cell catalyst, membrane electrode assembly and bipolar plates of fuel cells. The interaction between the CNTs catalyst support and the catalyst is also reviewed. Lastly, the authors outlined the challenges and recommendations for future study of surface functionalized CNTs composite for fuel cell application.</p> </abstract>

Noble Metal Phosphides: Robust Electrocatalysts toward Hydrogen Evolution Reaction.

Facing with serious carbon emission issues, the production of green H2 from electrocatalytic hydrogen evolution reaction (HER) has received extensive research interest. Almost all kinds of noble metal phosphides (NMPs) consisting of Pt-group elements (i.e., Ru, Rh, Pd, Os, Ir and Pt) are all highly active and pH-universal electrocatalysts toward HER. In this review, the recent progress of NMP-based HER electrocatalysts is summarized. It is further take typical examples for discussing important impact factors on the HER performance of NMPs, including crystalline phase, morphology, noble metal element and doping. Moreover, the synthesis and HER application of hybrid catalysts consisting of NMPs and other materials such as transition metal phosphides, oxides, sulfides and phosphates, carbon materials and noble metals is also reviewed. Reducing the use of noble metal is the key idea for NMP-based hybrid electrocatalysts, while the expanded functionality and structure-performance relationship are also noticed in this part. At last, the potential opportunities and challenges for this kind of highly active catalyst is discussed.

Transition Metal (Ni/Cu) Based Bimetallic Catalyst for Glycerol Oxidation

Alcohol fuel cell is considered as one of the most promising green energy generation option. Glycerol can be used as a potent fuel because of its excellent energy density, ready availability, financial viability and minimal toxicity. Moreover, glycerol is also an active petroleum by-product. In direct glycerol fuel cell, precious noble metal based catalyst was extensively used as electro-catalyst for glycerol oxidation. The use of noble metal as catalysts restricted the viable commercialisation due to its high cost. This study intended to use transition metal such as nickel and copper based monometallic and bimetallic catalyst for glycerol oxidation to lower down the cost of commercialisation. These metals already proved to be efficient catalyst for electro-oxidation of methanol and ethanol [1-2]. Carbon was already proved to prominent support material for electro-catalyst due to high surface area and superior conductivity.The metals were impregnated into carbon support followed by reduction under H2/Ar environment with 20 wt % metal loading. The weight ratio of Ni and Cu in bimetallic catalyst was fixed as 1:1. The average metal particle size of the catalysts varied between 7.8 to 16.3 nm. The cyclic voltammetry of different catalysts for 0.5 M glycerol oxidation in 1 M KOH is shown in Fig 1a). The onset potential of bimetallic catalyst (NiCu/C) was reduced to 0.20 V compared to their monometallic counterpart (0.39 V for Ni/C and 0.42 for Cu/C). The glycerol oxidation peak was observed at 0.71, 0.73 and 0.78 V for Cu/C, Ni/C and NiCu/C respectively. The specific activity and mass activity was shown in Fig 1b). The highest specific (76 mA/cm2) and mass activity (775 mA/mgmetal) was obtained for NiCu/C from glycerol oxidation. The obtained electrochemical surface area (ECSA) was highest for NiCu/C (99 m2/g) followed by Ni/C (44 m2/g) and Cu/C (34 m2/g). The higher activity of NiCu/C could be attributed to the lower Tafel slope, higher ECSA and charge transfer co-efficient. The EIS results conveyed that electro-oxidation process was slower than charge transfer process. Moreover, lowest time constants for the both the process was observed for NiCu/C catalyst. Hence, NiCu/C proved to be efficient electro-catalyst with superior activity for glycerol oxidation in direct glycerol fuel cell. Fig 1. a) Cyclic voltammetry of different catalyst in 0.5 M glycerol and 0.1 M KOH and b) Specific and mass activity of different catalyst.

Iridium Single Atom Catalysts for Oxygen Evolution Reaction in Acidic Medium

In order to reduce CO2 emissions and produce clean hydrogen one solution is to use sustainable energies (wind, solar or hydraulic) coupled with water electrolyser to produce H2 and store it before use it in fuel cell. The electrolyzer based on proton exchange membranes (PEM) is a promising technology because it can reach high current density (2 A.cm-2) [1] and can be easily coupled with intermittent energy sources [2]. However, the acidic conditions and working temperatures (80 °C) require the use of noble metals. On the anode side the oxidative condition prevents the use of carbon supported catalyst and the best catalyst for the oxygen evolution reaction (OER) so far is IrOx.The use of Ir single atom catalyst (SAC) supported on conducting oxide is a promising way to reduce the quantity of the scarce and expensive noble metal, increasing the electroactive surface and durability. SACs present an excellent dispersion and activity [3] and some conducting oxides are very promising regarding electrical conductivity and stability under oxidative conditions [4]. There are different approaches to prepare Ir SAC (wet impregnation, co-precipitation, photoelectrochemical reduction...) [3], whose success mainly depends on the nature of the Ir precursor, its interaction with the support and the thermal treatment temperature/duration. Some research groups have prepared and characterized Ir SAC on indium-tin oxide [5] but the activity and stability still need to be improved.The objective of this communication is to present the synthesis and the characterization of IrSAC on different conducting oxide supports. Ir precursor was synthesized and deposed on various supports. The physical characterization entails XRD, TEM, MEB, EDX to assess the morphology and composition of the catalyst. Spectroscopic analysis like XPS and XAS brings information on the chemical environment of Ir sites, while electrochemical measurements give information on the OER activity and stability of the catalyst.

The Application of Nano Titanium Dioxide for Hydrogen Production and Storage Enhancement

The utilization of hydrogen (H2) as a renewable and clean energy carrier, free from the reliance on fossil fuels, represents a significant technological challenge. The use of renewable energy sources for hydrogen production, such as photocatalytic hydrogen generation from water under solar radiation, has garnered significant interest. Indeed, the storage of hydrogen presents another hurdle to the ongoing advancement of hydrogen energy. Concerning solid-state hydrogen storage, magnesium hydride (MgH2) has emerged as a promising option due to its high capacity, excellent reversibility, and cost-effectiveness. Nevertheless, its storage performance needs improvement to make it suitable for practical applications. Titanium dioxide (TiO2) has distinguished itself as the most extensively researched photocatalyst owing to its high photo-activity, good chemical and thermal stability, low toxicity, and affordability. This review highlights the application of TiO2 for hydrogen production under visible and solar light, with a particular focus both on its modification without the use of noble metals and its utilization as a catalyst to enhance the hydrogen storage performance of MgH2.

Decarboxylative Amination with Nitroarenes via Synergistic Catalysis†

Comprehensive SummaryIn this paper, we have developed a decarboxylative amination of carboxylic acids with nitroarenes for the synthesis of secondary amines. The protocol is performed at mild conditions without the use of noble metals as catalysts. A wide range of structurally diverse secondary amines could be obtained in good yields (up to 94%) with good functional group tolerance. This transformation shows good to excellent selectivity, avoiding the generation of over alkylated byproducts.