Use Of Low-coherence Interferometry Research Articles

Low-coherence interferometric measurement of the spatial frequency dependence of the light field backscattered by optical interfaces

In this paper, we show how the combined use of low-coherence interferometry, balanced detection, and data processing comparable to that used in Fourier transform spectrometry allows us to characterize with ultimate resolutions (sub-parts per million in level, 0.2 nm in wavelength, and 25 mdeg in angle) the retro-reflection and retro-scattering response of both sides of a 2 mm thick silica wafer.

Enhancing detection of low-coherence interferometry signals acquired with a spatial heterodyne detector

The use of low-coherence interferometry for industrial applications is constantly growing due to its non-destructive nature and high resolution. Fourier domain systems are usually preferred as they provide a scanning-free method. Recently, a spatial heterodyne detector has proved to be useful in extending the measuring range without losing the micrometric resolution. This system Fourier transforms the interferometric signal, giving the information of interest as fringes in the output image. However, for low light intensities, the images might need to be processed to facilitate the visualization and detection of these fringes. In this work we analyze two main approaches to achieve this: one that uses a cross correlation method and the other one that uses a specially designed two-dimensional adaptive filtering technique. Both methods showed an improved performance when compared with conventional image processing techniques, enhancing the fringes contrast. Additionally, we showed that combining normalized cross correlation and the image gradient is an effective method to locate low intensity signals.

Local characterization of fiber-Bragg gratings through combined use of low-coherence interferometry and a layer-peeling algorithm

The technique presented here allows us to obtain an accurate determination of the refractive index modulation amplitude, the mean effective index, and the chirp of fiber-Bragg gratings. A layer-peeling algorithm is used to extract this information from low-coherence interferometry measurements. Finally, we present a systematic study over 10 uniform and chirped gratings to proof the reliability and accuracy of this technique.

Measurement of dye diffusion in agar gel by use of low-coherence interferometry.

We demonstrate low-coherence interferometry for diffusion measurements. We have measured the diffusion coefficient of a phthalocyanine dye in 1.5% agar gel with a two-wavelength interferometer; one wavelength was matched to the absorption peak of the dye at 675 nm, while the other, 805 nm, was not affected by the dye. The diffusion coefficient of the dye was found by fitting a mathematical model for the interferometer signal to the measured low-coherence interferometry amplitude. A 95% confidence interval for the diffusion coefficient was found to be D = (2.5 +/- 0.2) x 10(-10) m2/s. The influence of speckle averaging and experiment time on the determination of the diffusion coefficient has been studied. The presented technique allows in situ characterization of diffusion in semitransparent media.

Path-length distribution and path-length-resolved Doppler measurements of multiply scattered photons by use of low-coherence interferometry

We report first results of measurements by low-coherence Doppler interferometry of the path-length distribution of photons undergoing multiple scattering in a highly turbid medium. We use a Mach-Zehnder interferometer with multimode graded-index fibers and a superluminescent diode as the light source. The path-length distribution is obtained by recording of the heterodyne fluctuations that arise from the Brownian motion of particles in an Intralipid suspension as a function of the optical path length. The experimental path-length distribution is in good agreement with predictions of Monte Carlo simulations. In the heterodyne spectrum, an increase of the mean Doppler frequency with path length is observed.

Path-length-resolved dynamic light scattering: modeling the transition from single to diffusive scattering

Dynamic light-scattering spectroscopy is used to study Brownian motion within highly scattering samples. The fluctuations of the light field that is backscattered by a suspension of polystyrene microspheres are measured as power spectra by use of low-coherence interferometry to obtain path-length resolution. The data are modeled as the sum of contributions to the detected light weighted by a Poisson probability for the number of events that each component has experienced. By analyzing the broadening of the power spectra as a function of the path length for various sizes of particles, we determine the contribution of multiple scattering to the detected signal as a function of scattering anisotropy.

Measurement of angular distributions by use of low-coherence interferometry for light-scattering spectroscopy

We present a novel interferometer for measuring angular distributions of backscattered light. The new system exploits a low-coherence source in a modified Michelson interferometer to provide depth resolution, as in optical coherence tomography, but includes an imaging system that permits the angle of the reference field to be varied in the detector plane by simple translation of an optical element. We employ this system to examine the angular distribution of light scattered by polystyrene microspheres. The measured data indicate that size information can be recovered from angular-scattering distributions and that the coherence length of the source influences the applicability of Mie theory.

Characterization of Random Media by Low-Coherence Interferometry

We describe the use of low-coherence interferometry (LCI) for the structural characterization of nonuniform media with mesoscopic heterogeneities. The high sensitivity of LCI to the phase properties of scattered light makes it a suitable technique for the direct determination of size, concentration, and uniformity of heterogeneities in multi-phase systems. To demonstrate this, we examine using LCI to study a range of polystyrene microsphere suspensions with particle sizes ranging from 41 to 818 nm and concentrations from 0.25% to 10% by weight. The particle size and concentration information was extracted from the amplitude of the signal by using the theory of light scattering in nonuniform media. We have shown that the fluctuations in the unaveraged LCI signal may be utilized to extract additional information about system uniformity.

Accurate remote distance sensing by use of low-coherence interferometry: an industrial application

An apparatus for accurate remote distance sensing based on fiber-optic low-coherence light interferometry has been designed for molten glass level measurement. We demonstrate operation of the meter in an adverse industrial environment with <20-mum resolution (standard deviation) within a 20-mm range with the sensing head placed in an oven at ~800 degrees C. In laboratory conditions we were able to measure with 3-mum resolution, which could be improved to submicrometer level by optimization of a reference arm of the interferometer and detection electronics.