Use Of Fluorescence Lifetime Imaging Research Articles

The use of fluorescence lifetime imaging (FLIM) for in situ microbial detection in complex mineral substrates.

The utility of fluorescence lifetime imaging microscopy (FLIM) for identifying bacteria in complex mineral matrices was investigated. Baseline signals from unlabelled Bacillus subtilis and Euglena gracilis, and Bacillus subtilis labelled with SYTO 9 were obtained using two-photon excitation at 730, 750 and 800nm, identifying characteristic lifetimes of photosynthetic pigments, unpigmented cellular autofluorescence, and SYTO 9. Labelled and unlabelled B. subtilis were seeded onto marble and gypsum samples containing endolithic photosynthetic cyanobacteria and the ability to distinguish cells from mineral autofluorescence and nonspecific dye staining was examined in parallel with ordinary multichannel confocal imaging. It was found that FLIM enabled discrimination of SYTO 9 labelled cells from background, but that the lifetime of SYTO 9 was shorter in cells on minerals than in pure culture under our conditions. Photosynthetic microorganisms were easily observed using both FLIM and confocal. Unlabelled, nonpigmented bacteria showed weak signals that were difficult to distinguish from background when minerals were present, though cellular autofluorescence consistent with NAD(P)H could be seen in pure cultures, and phasor analysis permitted detection on rocks. Gypsum and marble samples showed similar autofluorescence profiles, with little autofluorescence in the yellow-to-red range. Lifetime or time-gated imaging may prove a useful tool for environmental microbiology. LAY DESCRIPTION: The standard method of bacterial enumeration is to label the cells with a fluorescent dye and count them under high-power fluorescence microscopy. However, this can be difficult when the cells are embedded in soil and rock due to fluorescence from the surrounding minerals and dye binding to ambiguous features of the substrate. The use of fluorescence lifetime imaging (FLIM) can disambiguate these signals and allow for improved detection of bacteria in environmental samples.

FLGS-04. Fluorescence lifetime imaging (FLIm) is a dye-free, high sensitivity approach for fluorescence guided surgery in high-grade and low-grade gliomas

Abstract INTRODUCTION Fluorescence-guided surgery can improve tumor identification and extent of surgical resection. 5-ALA is the standard for GBM, but is limited by lack of quantitative fluorescence, a need to work in the dark, and a lack of sensitivity for low grade tumors. We have developed a novel instrument for dye-free tissue autofluorescence lifetime imaging (FLIm) to identify glioma tissue during resection. This approach utilizes time-resolved autofluorescence measurements in narrow-band channels to assess markers of tissue metabolism. Compared to intensity-based imaging of exogenous fluorophores, FLIm has greater sensitivity without dependence on background lighting. The advantages of FLIm include quantitative tissue analysis, the ability to work under full light conditions, sensitivity for high and low grade gliomas, and the potential ability to identify IDH mutational status. In this study, we validated the use of FLIm for identification of glioma tissue at tumor resection margins. METHODS FLIm was used to image tissue margins during glioma resections and compared to microbiopsies from imaged regions to correlate fluorescence with histopathology. RESULTS FLIm was applied intraoperatively to 11 GBM and 5 LGG patients (7 imaged biopsies per patient). In GBM, tumor infiltration of cortex was associated with significantly decreased fluorescence lifetime (FL) in channels 2 (470/28nm;p<0.05) and 3 (542/50nm;p<0.002). In subcortical margins, FL was inversely proportional to the density of tumor in channels 2,3 (p<0.05). When IDH wild-type GBMs were compared to IDH1-mutant tumors, FL was noted to be significantly longer in channel 1 (390/40nm;p<0.05), and trended towards longer FL in channel 2, shorter FL in channel 3. In LGG, FL was significantly correlated with tumor density in channel 2 (p<0.01). CONCLUSIONS FLIm is a dye-free, quantitative alternative to 5-ALA for fluorescence guided glioma resections with sensitivity to high and low-grade tumors, and the ability to predict IDH mutations in GBM. Further validation studies are on-going.

Electrocatalytic Reaction Driven Flow: Role of pH in Flow Reversal.

Immobilized bimetallic structures generate fluid flow during electrocatalytic reactions with hydrogen peroxide, which is typically driven from the anodic metal to the cathodic metal similar to an electroosmotic flow. However, under low reactive regimes, the generated flow becomes fully reversed, which cannot be explained by the classical electroosmotic theory. This work aims at unraveling the origin and dynamics of this flow hysteresis through a combined experimental and numerical approach. The key electrocatalytic parameters that contribute to flow reversal are analyzed experimentally and numerically under low reactive regimes induced by bulk pH variations. The proton gradient that initiates chemomechanical actuation is probed with the use of fluorescence lifetime imaging. The fluid flow dynamics under reactive regimes are visualized by the use of particle tracking. Our numerical simulations elucidate the role of pH variations and additional ionic species (counterions) toward flow reversal. The combination of these techniques highlights the interplay between electrocatalytic and electrokinetic phenomena on the occurrence of flow reversal.

Faster, sharper, more precise: Automated Cluster-FLIM in preclinical testing directly identifies the intracellular fate of theranostics in live cells and tissue

Fluorescence microscopy is widely used for high content screening in 2D cell cultures and 3D models. In particular, 3D tissue models are gaining major relevance in modern drug development. Enabling direct multiparametric evaluation of complex samples, fluorescence lifetime imaging (FLIM) adds a further level to intensity imaging by the sensitivity of the fluorescence lifetime to the microenvironment. However, the use of FLIM is limited amongst others by the acquisition of sufficient photon numbers without phototoxic effects in live cells. Herein, we developed a new cluster-based analysis method to enhance insight, and significantly speed up analysis and measurement time for the accurate translation of fluorescence lifetime information into pharmacological pathways.Methods: We applied a fluorescently-labeled dendritic core-multishell nanocarrier and its cargo Bodipy as molecules of interest (MOI) to human cells and reconstructed human tissue. Following the sensitivity and specificity assessment of the fitting-free Cluster-FLIM analysis of data in silico and in vitro, we evaluated the dynamics of cellular molecule uptake and intracellular interactions. For 3D live tissue investigations, we applied multiphoton (mp) FLIM. Owing to Cluster-FLIM's statistics-based fitting-free analysis, we utilized this approach for automatization.Results: To discriminate the fluorescence lifetime signatures of 5 different fluorescence species in a single color channel, the Cluster-FLIM method requires only 170, respectively, 90 counts per pixel to obtain 95% sensitivity (hit rate) and 95% specificity (correct rejection rate). Cluster-FLIM revealed cellular interactions of MOIs, representing their spatiotemporal intracellular fate. In a setting of an automated workflow, the assessment of lysosomal trapping of the MOI revealed relevant differences between normal and tumor cells, as well as between 2D and 3D models.Conclusion: The automated Cluster-FLIM tool is fitting-free, providing images with enhanced information, contrast, and spatial resolution at short exposure times and low fluorophore concentrations. Thereby, Cluster-FLIM increases the applicability of FLIM in high content analysis of target molecules in drug development and beyond.

Real-time augmented reality for delineation of surgical margins during neurosurgery using autofluorescence lifetime contrast.

Current clinical brain imaging techniques used for surgical planning of tumor resection lack intraoperative and real-time feedback; hence surgeons ultimately rely on subjective evaluation to identify tumor areas and margins. We report a fluorescence lifetime imaging (FLIm) instrument (excitation: 355 nm; emission spectral bands: 390/40 nm, 470/28 nm, 542/50 nm and 629/53 nm) that integrates with surgical microscopes to provide real-time intraoperative augmentation of the surgical field of view with fluorescent derived parameters encoding diagnostic information. We show the functionality and safety features of this instrument during neurosurgical procedures in patients undergoing craniotomy for the resection of brain tumors and/or tissue with radiation damage. We demonstrate in three case studies the ability of this instrument to resolve distinct tissue types and pathology including cortex, white matter, tumor and radiation-induced necrosis. In particular, two patients with effects of radiation-induced necrosis exhibited longer fluorescence lifetimes and increased optical redox ratio on the necrotic tissue with respect to non-affected cortex, and an oligodendroglioma resected from a third patient reported shorter fluorescence lifetime and a decrease in optical redox ratio than the surrounding white matter. These results encourage the use of FLIm as a label-free and non-invasive intraoperative tool for neurosurgical guidance.

Simultaneous AFM and FLIM Imaging with a SiR-DNA Probe Reveals Structural Changes during DNA Condensation in Live Cell Nuclei

We show that the use of fluorescence lifetime imaging (FLIM) on the cell-permeable DNA reporter dye SiR-DNA reports on the condensation state of DNA in the nucleus of live cells. As opposed to other probes, SiR-DNA offers the advantages of minimal toxicity, photostability, and the use of gentler far-red light illumination compared to alternative, UV sensitive probes. This permits single photon excitation and compatibility with super-resolution techniques and makes for a powerful probe for live-cell imaging. Using a variety of biological and chemical processes known to induce DNA condensation and structural modifications, we demonstrate that SiR-DNA FLIM informs on state changes in live nuclei without the conventional requirement for cell fixation with alternative probes. We verify our FLIM findings with simultaneous atomic force microscopy (AFM) measurements in the same field-of-view and monitor nuclear stiffness in response to treatments that affect DNA condensation. The acquisition of such multi-parametric biophysical data enables us to highlight and study differences between types of nuclear modifications and their secondary effects.

Visualizing liver anatomy, physiology and pharmacology using multiphoton microscopy.

Multiphoton microscopy (MPM) has become increasingly popular and widely used in both basic and clinical liver studies over the past few years. This technology provides insights into deep live tissues with less photobleaching and phototoxicity, which helps us to better understand the cellular morphology, microenvironment, immune responses and spatiotemporal dynamics of drugs and therapeutic cells in the healthy and diseased liver. This review summarizes the principles, opportunities, applications and limitations of MPM in hepatology. A key emphasis is on the use of fluorescence lifetime imaging (FLIM) to add additional quantification and specificity to the detection of endogenous fluorescent species in the liver as well as exogenous molecules and nanoparticles that are applied to the liver in vivo. We anticipate that in the near future MPM-FLIM will advance our understanding of the cellular and molecular mechanisms of liver diseases, and will be evaluated from bench to bedside, leading to real-time histology of human liver diseases.

Editorial: Exploring Bacterial Colonies in Solid Foods or Model Foods Using Non-Destructive Techniques.

Bacteria are present in all foods, whether they are indigenous or inoculated. They can be beneficial to the quality of foods, responsible for food spoilage, or even pathogens. In solid food products, bacteria are immobilized. They thus grow as colonies entrapped within the food products or on the food surfaces. In both cases, bacteria interact with the solid matrix, sometimes facing difficulties to access the nutrients as nutrients have to diffuse from the matrix to the bacterial colonies. Bacterial development can thus be impaired in solid matrices in comparison to planktonic growth. To control the growth of bacteria in solid foods is then of major importance. In the case of pathogens, it is crucial for safety issues to predict how the bacteria present as initial contaminants will develop. In the case of inoculated bacteria, such as lactic acid bacteria, it is also crucial to control their development because they are responsible for the final quality of the food products. However, studies on the growth of bacteria have been essentially focused on growth in liquid media. Resolute techniques, which include both microcopy approaches and quantitative techniques, have now been developed to observe colonies at the microscopic scale. They allow studying the variation of growth in different contexts either in model growth culture media or in model foods. This Research Topic starts with four review papers. A first comprehensive review about bacterial colonies redraws the history of the studies on colonies, synthetizes the conditions of growth in which growth in colonies differs from planktonic growth, and finally presents concepts of the interaction of bacterial colonies with the food matrix in which they grow, with cheese as an example (Jeanson et al.). The second review demonstrates the importance of modeling the growth of bacterial colonies in solids foods despite a lack of knowledge. The different types of models and their potential consequences on decisions are presented and discussed (Skandamis and Jeanson). The third review shows how non-invasive techniques can be used to observe bacterial growth and also quantify the bacterial metabolism in colonies at the microscopic scale (Lobete et al.). The last review paper shows how microscopy techniques are particularly valuable to increase knowledge about bacterial colonies in model foods and foods. Fluorescent microscopy allows targeting metabolites and understand the physiology of bacteria within colonies (Hickey et al.). The five following papers present original results in the field. Using an automated microscope coupled with fluorescence dyes, it was possible to demonstrate that the exposure to an oxidizing disinfectant led to different morphologies of cells depending on the strains and that dead cells were randomly distributed within the micro-colonies (Zhao et al.). The following study demonstrates the accuracy of a phenotyping technology based on laser-induced speckle scatter patterns in Bacillus colonies. The authors showed that the distribution of speckle size is modified during the growth of colonies (Kim et al.). The three following studies investigate bacterial colonies of lactic acid bacteria in their food environment in model cheeses or investigate the pH in their surrounding micro-environment in Cheddar cheeses. Physiology and growth of Streptococcus thermophilus colonies was compared in liquid milk and renneted milk using microcalorimetry. The results showed that above a threshold size of colonies (low inoculation levels), growth rates and metabolism in renneted milk differed from the one observed in liquid milk (Stulova et al.). The use of fluorescence lifetime imaging was shown to be relevant to investigate the pH micro-heterogeneity in Cheddar cheeses (Burdikova et al.). These results suggest that the surroundings of bacterial colonies within cheeses could differ from homogeneous growth conditions in liquid medium. The last study questioned the access of bacteria in colonies to their nutrients, through the assessment of diffusion of solutes inside colonies. The diffusion of high molecular weight molecules was assessed inside Lactococcus lactis colonies grown in a model cheese. The results led to the conclusion that diffusion of molecules inside bacterial colonies depends on the physicochemical properties of the molecules (Floury et al.). In conclusion, since bacteria mainly grow in colonies in foods, increase knowledge on growth and physiology of bacteria growing as colonies is now a crucial issue. This is achieved by the recent development of non-invasive techniques that allows investigating at the microscopic scale with time lapse and quantitative analyses. Knowledge about the growth and the adaptive response of bacteria to the food environment will continue to grow by addressing the remaining questions about interactions between bacterial colonies and their food environment.

On the use of fluorescence lifetime imaging and dihydroethidium to detect superoxide in intact animals and ex vivo tissues: A reassessment

Recently, D.J. Hall et al. reported that ethidium (E+) is formed as a major product of hydroethidine (HE) or dihydroethidium reaction with superoxide (O2−) in intact animals with low tissue oxygen levels (J. Cereb. Blood Flow Metab. 32:23–32, 2012). The authors concluded that measurement of E+ is an indicator of O2− formation in intact brains of animals. This finding is in stark contrast to previous reports using in vitro systems showing that 2-hydroxyethidium, not ethidium, is formed from the reaction between O2− and HE. Published in vivo results support the in vitro findings. In this study, we performed additional experiments in which HE oxidation products were monitored under different fluxes of O2−. Results from these experiments further reaffirm our earlier findings (H. Zhao et al., Free Radic. Biol. Med. 34:1359, 2003). We conclude that whether in vitro or in vivo, E+ measured by HPLC or by fluorescence lifetime imaging is not a diagnostic marker product for O2− reaction with HE.

Multiphoton fluorescence, second harmonic generation, and fluorescence lifetime imaging of whole cleared mouse organs

Multiphoton microscopy of cleared tissue has previously been demonstrated to generate large three-dimensional (3D) volumetric image data on entire intact mouse organs using intrinsic tissue fluorescence. This technique holds great promise for performing 3D virtual biopsies, providing unique information on tissue morphology, and guidance for subsequent traditional slicing and staining. Here, we demonstrate the use of fluorescence lifetime imaging in cleared organs for achieving molecular contrast that can reveal morphologically distinct structures, even in the absence of knowledge of the underlying molecular source. In addition, we demonstrate the power of multimodal imaging, combining multiphoton fluorescence, second harmonic generation, and lifetime imaging to reveal exceptional morphological detail in an optically cleared mouse knee.

Noninvasive Photoacoustic and Fluorescence Sentinel Lymph Node Identification using Dye-Loaded Perfluorocarbon Nanoparticles

The contrast mechanisms used for photoacoustic tomography (PAT) and fluorescence imaging differ in subtle, but significant, ways. The design of contrast agents for each or both modalities requires an understanding of the spectral characteristics as well as intra- and intermolecular interactions that occur during formulation. We found that fluorescence quenching that occurs in the formulation of near-infrared (NIR) fluorescent dyes in nanoparticles results in enhanced contrast for PAT. The ability of the new PAT method to utilize strongly absorbing chromophores for signal generation allowed us to convert a highly fluorescent dye into an exceptionally high PA contrast material. Spectroscopic characterization of the developed NIR dye-loaded perfluorocarbon-based nanoparticles for combined fluorescence and PA imaging revealed distinct dye-dependent photophysical behavior. We demonstrate that the enhanced contrast allows detection of regional lymph nodes of rats in vivo with time-domain optical and photoacoustic imaging methods. The results further show that the use of fluorescence lifetime imaging, which is less dependent on fluorescence intensity, provides a strategic approach to bridge the disparate contrast reporting mechanisms of fluorescence and PA imaging methods.

Dynamic noninvasive monitoring of renal function in vivo by fluorescence lifetime imaging

Kidneys normally filter the blood of excess salts and metabolic products, such as urea, while retaining plasma proteins. In diseases such as multiple myeloma and diabetes mellitus, the renal function is compromised and protein escapes into the urine. In this study, we present the use of fluorescence lifetime imaging (FLI) to image excess serum protein in urine (proteinuria). The near-infrared fluorescent dye LS-288 has distinct lifetimes when bound to protein versus free in solution, providing contrast between the protein-rich viscera and the mostly protein-free bladder. FLI with LS-288 in mice revealed that fluorescence lifetime (FLT) differences in the bladder relative to surrounding tissues was due to the fractional contributions of the bound and unbound dye molecules. The FLT of LS-288 decreased in the case of proteinuria while fluorescence intensity was unchanged. The results show that FLI can be useful for the dynamic imaging of protein-losing nephropathy due to diabetes mellitus and other renal diseases and suggest the potential use of the FLI to distinguish tumors from fluid-filled cysts in the body.

Fluorescence probe techniques to monitor protein adsorption-induced conformation changes on biodegradable polymers

The study of protein adsorption and any associated conformational changes on interaction with biomaterials is of great importance in the area of implants and tissue constructs. This study aimed to evaluate some fluorescent techniques to probe protein conformation on a selection of biodegradable polymers currently under investigation for biomedical applications. Because of the fluorescence emanating from the polymers, the use of monitoring intrinsic protein fluorescence was precluded. A highly solvatochromic fluorescent dye, Nile red, and a well-known protein label, fluorescein isothiocyanate, were employed to study the adsorption of serum albumin to polycaprolactone and to some extent also to two starch-containing polymer blends (SPCL and SEVA-C). A variety of fluorescence techniques, steady state, time resolved, and imaging were employed. Nile red was found to leach from the protein, while fluorescein isothiocyanate proved useful in elucidating a conformational change in the protein and the observation of protein aggregates adsorbed to the polymer surface. These effects were seen by making use of the phenomenon of energy migration between the fluorescent tags to monitor interprobe distance and the use of fluorescence lifetime imaging to ascertain the surface packing of the protein on polymer.