Use Of Electrospray Research Articles

Enhanced boiling heat transfer efficiency through the simultaneous use of electrospray and photolithography methods: An experimental study and correlation

Enhanced boiling heat transfer efficiency through the simultaneous use of electrospray and photolithography methods: An experimental study and correlation

Prospects of Inhaled Phage Therapy for Combatting Pulmonary Infections.

With respiratory infections accounting for significant morbidity and mortality, the issue of antibiotic resistance has added to the gravity of the situation. Treatment of pulmonary infections (bacterial pneumonia, cystic fibrosis-associated bacterial infections, tuberculosis) is more challenging with the involvement of multi-drug resistant bacterial strains, which act as etiological agents. Furthermore, with the dearth of new antibiotics available and old antibiotics losing efficacy, it is prudent to switch to non-antibiotic approaches to fight this battle. Phage therapy represents one such approach that has proven effective against a range of bacterial pathogens including drug resistant strains. Inhaled phage therapy encompasses the use of stable phage preparations given via aerosol delivery. This therapy can be used as an adjunct treatment option in both prophylactic and therapeutic modes. In the present review, we first highlight the role and action of phages against pulmonary pathogens, followed by delineating the different methods of delivery of inhaled phage therapy with evidence of success. The review aims to focus on recent advances and developments in improving the final success and outcome of pulmonary phage therapy. It details the use of electrospray for targeted delivery, advances in nebulization techniques, individualized controlled inhalation with software control, and liposome-encapsulated nebulized phages to take pulmonary phage delivery to the next level. The review expands knowledge on the pulmonary delivery of phages and the advances that have been made for improved outcomes in the treatment of respiratory infections.

Printing zwitterionic self-assembled thin film composite membranes: Tuning thickness leads to remarkable permeability for nanofiltration

Zwitterionic copolymer self-assembled membranes have been shown to have impressive selectivity for nanofiltration applications. Conventional approaches used to fabricate these asymmetric membranes, such as casting followed by phase inversion, typically result in thick selective layers being formed that can limit permeance. In this work, we evaluate the use of electrospray to print thin layers of amphiphilic zwitterionic selective layers onto UF membrane substrates. Dyes are used to probe the rejection of these membranes while their thickness is reduced by orders of magnitude compared to casting methods. As thickness is decreased, water permeance was found to proportionally increase while dye rejection was maintained for some dyes. It was found that a threshold minimum thickness was required to maintain rejection for some dye molecules while the intrinsic permeability of the polymer films changed as a function of thickness. Annealing the membranes was found to increase permeance as well without a significant loss of rejection. Notably, one of our annealed ultra-thin TFC membranes was found to exhibit a water permeance value of 180 LMH/bar and a chlorophyllin rejection at 99.67%. Interestingly, this permeance is indistinguishable from the supporting UF membrane permeance, suggesting that even higher permeance without rejection loss is possible with more permeable support layers.

Interfacial Targeting of Sessile Droplets Using Electrospray.

We report on the use of electrospray atomization to deliver nanoparticles and surfactant directly to the surface of sessile droplets. The particles delivered to the target droplet remained adsorbed at its interface since they arrived solvent-free. Upon complete evaporation, the interface of the target drop was mapped to the underlying substrate, forming a nanoparticle deposit. The use of electrospray permitted the exploration of the interfacial particle transport and the role of surfactants in governing particle motion and deposit structure. When no surfactant was present in the sprayed solution, there was no observable convection of the interfacial particles. When Tween 80, a high-molecular-weight surfactant, was added to the sprayed solution, the surface flow was similarly suppressed. Only when small surfactants (e.g., sodium dodecyl sulfate) were present in the sprayed solution was Marangoni flow, directed toward the droplet apex, induced at the interface. This flow drove the interfacial particles to the apex of the target droplet, creating a particle-dense region at the center of the final deposit. We found that small surfactants were capable of desorbing from the interface at a sufficiently high rate relative to the evaporation time scale of the target droplet. Once inside the drop, the desorbed surfactant was convected to the contact line where it accumulated, inducing a surface tension gradient and a solutal Marangoni flow. Numerical modeling using the lattice Boltzmann-Brownian dynamics method confirmed this mechanism of particle transport and its relationship to deposit structure. The use of sacrificial targets combined with electrospray may provide a unique capability for building colloidal monolayers with organized structure in a scalable way.

Electrospray Modifications for Advancing Mass Spectrometric Analysis.

Generation of analyte ions in gas phase is a primary requirement for mass spectrometric analysis. One of the ionization techniques that can be used to generate gas phase ions is electrospray ionization (ESI). ESI is a soft ionization method that can be used to analyze analytes ranging from small organics to large biomolecules. Numerous ionization techniques derived from ESI have been reported in the past two decades. These ion sources are aimed to achieve simplicity and ease of operation. Many of these ionization methods allow the flexibility for elimination or minimization of sample preparation steps prior to mass spectrometric analysis. Such ion sources have opened up new possibilities for taking scientific challenges, which might be limited by the conventional ESI technique. Thus, the number of ESI variants continues to increase. This review provides an overview of ionization techniques based on the use of electrospray reported in recent years. Also, a brief discussion on the instrumentation, underlying processes, and selected applications is also presented.

Acetalated Dextran Microparticulate Vaccine Formulated via Coaxial Electrospray Preserves Toxin Neutralization and Enhances Murine Survival Following Inhalational Bacillus Anthracis Exposure.

Subunit formulations are regarded as the safest type of vaccine, but they often contain a protein-based antigen that can result in significant challenges, such as preserving antigenicity during formulation and administration. Many studies have demonstrated that encapsulation of protein antigens in polymeric microparticles (MPs) via emulsion techniques results in total IgG antibody titers comparable to alum formulations, however, the antibodies themselves are non-neutralizing. To address this issue, a coaxial electrohydrodynamic spraying (electrospray) technique is used to formulate a microparticulate-based subunit anthrax vaccine under conditions that minimize recombinant protective antigen (rPA) exposure to harsh solvents and high shear stress. rPA and the adjuvant resiquimod are encapsulated either in separate or the same acetalated dextran MPs. Using a murine model, the electrospray formulations lead to higher IgG2a subtype titers as well as comparable total IgG antibody titers and toxin neutralization relative to the FDA-approved vaccine (BioThrax). BioThrax provides no protection against a lethal inhalational challenge of the highly virulent Ames Bacillus anthracis anthrax strain, whereas 50% of the mice vaccinated with separately encapsulated electrospray MPs survive. Overall, this study demonstrates the potential use of electrospray for encapsulating protein antigens in polymeric MPs.

Continuous and patterned deposition of functional block copolymer thin films using electrospray

We report the use of electrospray to continuously deposit thin films, including patterned films, of a block copolymer (BCP). High substrate temperatures led to vertically oriented cylindrical microdomains at the film surface independent of the solvent composition and deposition rates utilized. Conversely, low substrate temperatures resulted in morphologies that were more sensitive to these parameters, with poorly ordered films of globular structures observed at the lowest temperatures considered. The deposition pattern is defined by spatially varying the electric field at the substrate using an underlying charged grid. These results open up new possibilities for patterned deposition of BCP films with morphological control.

Tissue proteomics and imaging mass spectrometry

Tissue proteomics and imaging mass spectrometry

Controlling microencapsulation and release of micronized proteins using poly(ethylene glycol) and electrospraying

The fabrication of tailored microparticles for delivery of therapeutics is a challenge relying upon a complex interplay between processing parameters and materials properties. The emerging use of electrospraying allows better tailoring of particle morphologies and sizes than current techniques, critical to reproducible release profiles. While dry encapsulation of proteins is essential for the release of active therapeutics from microparticles, it is currently uncharacterized in electrospraying. To this end, poly(ethylene glycol) (PEG) was assessed as a micronizing and solubilizing agent for dry protein encapsulation and release from electrosprayed particles made from polycaprolactone (PCL). The physical effect of PEG in protein-loaded poly(lactic-co-glycolic acid) (PLGA) particles was also studied, for comparison. The addition of 5–15wt% PEG 6kDa or 35kDa resulted in reduced PCL particle sizes and broadened distributions, which could be improved by tailoring the electrospraying processing parameters, namely by reducing polymer concentration and increasing flow rate. Upon micronization, protein particle size was reduced to the micrometer domain, resulting in homogenous encapsulation in electrosprayed PCL microparticles. Microparticle size distributions were shown to be the most determinant factor for protein release by diffusion and allowed specific control of release patterns.

Modeling Interactions between an Amino Acid and a Metal Dication: Cysteine-Calcium(II) Reactions in the Gas Phase.

The gas-phase interactions between Ca2+ and cysteine (Cys) have been investigated through the use of electrospray ionization/mass spectrometry techniques and B3LYP/6-311++ G(3df,2p)//B3LYP/6-311+G(d,p) density functional theory computations. The unimolecular collision-activated decomposition of [Ca(Cys)]2+ is dominated by the loss of ammonia, a Coulomb explosion yielding NH4 + and [CaC3 H3 O2 S]+ , and the loss of H2 S. The detection of lighter [C3 H3 OS]+ monocations indicates that the [CaC3 H4 O2 S]2+ doubly charged species produced by the loss of ammonia undergo a subsequent Coulomb explosion yielding [C3 H3 OS]+ +CaOH+ . This [C3 H3 OS]+ cation finally decomposes into [C2 H3 S]+ +CO. Alternatively, the aforementioned [CaC3 H4 O2 S]2+ dications may also lead to lighter [CaCO2 ]2+ and [CaC2 H4 S]2+ dications by the loss of C2 H4 S and CO2 , respectively. A detailed theoretical exploration of the Ca2+ /Cys potential-energy surface indicates that the salt-bridge structures, in which the metal dication interacts with the carboxylate group of the zwitterionic form of cysteine, are at the origin of the different reaction pathways leading to the observed product ions, even though they lie higher in energy than the charge-solvated adduct in which the metal interacts simultaneously with the carbonyl oxygen, the amino, and the SH group of its canonical form. The interaction between the metal cation and the base is essentially electrostatic, with a calculated binding energy of 560 kJ mol-1 .

Changes in the seminal plasma proteome of adolescents before and after varicocelectomy

To compare seminal plasma protein profiles before and after varicocele correction to assess if surgical intervention alters the protein profile. Prospective study. Academic research environment. Nineteen adolescent boys with varicocele grades II or III. Two semen samples were collected before bilateral subinguinal microsurgical varicocelectomy, and two semen samples were collected 3 months after surgery. Seminal plasma protein profiles were determined with the use of two-dimensional gel electrophoresis. Proteins were separated in 18-cm 3-10 pH strips and 10%-17.5% gradient gels. Gels were stained, scanned, and compared with the use of Imagemaster 2D platinum 7.0. Spots of interest were removed from gels, and protein digestion was performed with the use of trypsin. Digests were identified with the use of electrospray ionization-quadrupole/time-of-flight tandem mass spectrometry (ESI-QTOF MS/MS), and spectra were analyzed with the use of the Mascot software. Proteins uniquely or overexpressed in each period (before or after varicocelectomy). Nineteen spots were differentially expressed between pre- and postsurgery samples. Identified proteins were albumin, proteasome subunit alpha type 6, alpha-1-antitrypsin, fibronectin, CD177, prostatic acid phosphatase, specific prostatic antigen, alpha-2-antiplasmin, vitamin D-binding protein, gastricsin, clusterin, semenogelin-1, semenogelin-2, superoxide dismutase, protein-glutamine gamma glutamyltransferase-4, and prolactin-inducing protein. Varicocelectomy is associated with changes in the seminal plasma protein profile. Understanding specific pathways leading to male infertility may further assist physicians in demonstrating deviation from homeostasis in male infertility. In addition, it may be possible to observe if surgical intervention does indeed revert altered pathways toward a homeostatic state.

Electrospray encapsulation of toll-like receptor agonist resiquimod in polymer microparticles for the treatment of visceral leishmaniasis.

Leishmaniasis is a disease caused by the intracellular protozoan, Leishmania. A current treatment for cutaneous leishmaniasis involves the delivery of imidazoquinolines via a topical cream. However, there are no parenteral formulations of imidazoquinolines for the most deadly version of the disease, visceral leishmaniasis. This work investigates the use of electrospray to encapsulate the imidazoquinoline adjuvant resiquimod in acid sensitive microparticles composed of acetalated dextran (Ac-DEX) or Ac-DEX/Tween blends. The particles were characterized and tested both in vitro and in vivo. Solutions of Ac-DEX and resiquimod in ethanol were electrosprayed to generate approximately 2 μm Ac-DEX particles containing resiquimod with an encapsulation efficiency of 85%. To prevent particle aggregation, blends of Ac-DEX with Tween 20 and Tween 80 were investigated. Tween 80 was then blended with the Ac-DEX at ∼10% (w/w) of total polymer and particles containing resiquimod were formed via electrospray with encapsulation efficiencies between 40% and 60%. In vitro release profiles of resiquimod from Ac-DEX/Tween 80 particles exhibited the acid-sensitive nature of Ac-DEX, with 100% drug release after 8 h at pH 5 (phagosomal pH) and after 48 h at pH 7.4 (physiological pH). Treatment with Ac-DEX/Tween 80 particles elicited significantly greater immune response in RAW macrophages over free drug. When injected intravenously into mice inoculated with Leishmania, parasite load reduced significantly in the bone marrow compared to blank particles and phosphate-buffered saline controls. Overall, electrospray appears to offer an elegant, scalable way to encapsulate adjuvant into an acid sensitive delivery vehicle for use in treating visceral leishmaniasis.

Nanoelectrospray with ion-trap mass spectrometry for the determination of beta-casomorphins in derived milk products

beta-Casomorphins (b-CMs) are bioactive peptides derived from casein with opioid agonist effects similar to morphine. The use of electrospray (ESI) with quadrupole ion-trap mass spectrometry (QIT-MS) for these compounds in two matrices, cheese and milk, was examined. It was compared to a liquid chromatography (LC) coupled to mass spectrometry (LC–MS), and a “soft” ionisation technique, NanoMate, with selected ion monitoring (SIM), which are unreliable for the determination of trace casomorphins in derived milk products. b-CM mass fragmentation pathways were done for the four most common b-CMs: β-casomorphin (1-5) bovine (b-CM-5), β-casomorphin (1-7) bovine (b-CM-7), [D-Ala2, D-Pro4,Tyr5]-β-casomorphin (1-5) amide (b-CM-10) and β-casomorphin (1-5) amide [D-Ala2,Hyp4,Tyr5] (b-CM-11). The major product ions obtained in QIT-MS were used to construct fragmentation pathways for b-CMs. The different collision energies using automated nanoelectrospray ion source NanoMate and conventional LC in QIT-MS were studied. Calibration data for b-CMs, using spiked milk or cheese samples (10 g or 10 mL), were: NanoMate/MS (25–1000 μg/L), r 2 = 0.998; NanoMate/MS 2 (5–1000 μg/L), r 2 = 0.9992; NanoMate/MS 3 (2.5–1000 μg/L), r 2 = 0.9998. Reproducibility data (% RSD, N = 5) for NanoMate/MS n mode ranged between 2.0 at 500 μg/L and 7.0 at 10 μg/L.

Long‐term quantification of the release of monomers from dental resin composites and a resin‐modified glass ionomer cement

This study quantified the release of monomers from polymerized specimens of four commercially available resin composites and one glass ionomer cement immersed in water:ethanol solutions. Individual standard curves were prepared from five monomers: (1) triethylene glycol dimethacrylate (TEGDMA), (2) 2-hydroxy-ethyl methacrylate (HEMA), (3) urethane dimethacrylate (UDMA), (4) bisphenol A glycidyl dimethacrylate (BISGMA), and (5) bisphenol A. The concentration of the monomers was determined at Days 1, 7, 30, and 90 with the use of electrospray ionization/mass spectrometry. Data were expressed in mean micromol per mm(2) surface area of specimen and analyzed with Scheffe's test (p<0.05). The following monomers were found in water: monomers (1) and (2) from Delton sealant, monomer (5) from ScotchBond Multipurpose Adhesive and Delton sealant, monomer (3) from Definite and monomer (4) from Fuji II LC, ScotchBond Multipurpose Adhesive, Synergy and Definite. All these monomers increased in concentration over time, with the exception of monomer (1) from Delton sealant. Monomers (3) and (5) were found in extracts of materials despite their absence from the manufacturer's published composition. All monomers were released in significantly higher concentrations in water:ethanol solutions than in water. The greatest release of monomers occurred in the first day. The effect of the measured concentrations of monomers (1-5) on human genes, cells, or tissues needs to be considered with the use of a biological model.

Methods for biocatalyst screening.

Biocatalysts are now widely accepted as useful alternative tools to classic organic synthetic techniques for the regio- and enantioselective synthesis under mild reaction conditions in many fields of chemistry. The development of techniques for the rational or evolutionary design of novel or modified enzymes has increased the need for fast and reliable methods for the identification of the most powerful catalysts. We present a short overview on screening techniques in this area. Beside classical methods such as spectrophotometry and fluorimetry, a number of new approaches like methods based on the measurement of pH changes or IR-thermography have been recently developed. Additionally the use of electrospray and matrix-assisted laser desorption/ionization mass spectrometry has gained increasing influence in this field of biotechnology.

First-Known High-Nuclearity Copper-Nickel Carbonyl Cluster: [Cu~xNi~3~5~-~x(CO)~4~0]^5^- (with x = 3 or 5) Containing an Unprecedented 35-Atom Three-Layer hcp Triangular Stacking Metal-Core Geometry

Reactions of [Ni6(CO)12]2- (1) with CuBr2 have given rise in small yields (∼10%) to the first example of a close-packed copper-nickel carbonyl cluster; its formulation as [CuxNi35-x(CO)40]5- (with x=3 or 5) is based upon a low-temperature CCD X-ray crystallographic determination coupled with an elemental analysis and X-ray fluorescence measurements. This air-unstable black pentaanion (2) together with one co-crystallized bromide anion, six [NMe4]+ counterions, and one solvated acetone molecule comprise the crystallographic independent part in a monoclinic unit cell of P21/n symmetry (with Z=4). The geometrically unprecedented 35-atom hcp M(A)2M(B)3Ni30 polyhedron of pseudo-D3h symmetry consists of a central 15-atom equilateral ν4M(B)3Ni12 triangle that is capped on both sides by two symmetry-related 10-atom equilateral ν3M(A)Ni9 triangles. The 35-atom M(A)2M(B)3Ni30 core is encapsulated by 40 COs, whose connectivities, due to an “extra” CO ligand on one of the three triangular sides, reduce the pseudo D3h symmetry of the metal core to Cs. An elemental analysis via AA and X-ray fluorescence measurements resulted in Cu/Ni ratios of 3.2/31.8 and 3.7/31.3, respectively, that are consistent with the metal core being either Cu5Ni30 (i.e., M(A)=M(B)=Cu) or Cu3Ni32 (i.e., M(A)=Ni; M(B)=Cu). Several attempts to determine the actual stoichiometry of the metal core by use of electrospray FT/MS/ICR measurements were unsuccessful. The maximum metal-core diameter of 2 is ca. 0.41 nm parallel and 0.85 nm perpendicular to the principal 3-fold axis.

PM processing of heat dissipation components for microelectronics applications: R.M. German et al (Pennsylvania State University, Pennsylvania, USA)

The fabrication of tailored microparticles for delivery of therapeutics is a challenge relying upon a complex interplay between processing parameters and materials properties. The emerging use of electrospraying allows better tailoring of particle morphologies and sizes than current techniques, critical to reproducible release profiles. While dry encapsulation of proteins is essential for the release of active therapeutics from microparticles, it is currently uncharacterized in electrospraying. To this end, poly(ethylene glycol) (PEG) was assessed as a micronizing and solubilizing agent for dry protein encapsulation and release from electrosprayed particles made from polycaprolactone (PCL). The physical effect of PEG in protein-loaded poly(lactic-co-glycolic acid) (PLGA) particles was also studied, for comparison. The addition of 5–15 wt% PEG 6 kDa or 35 kDa resulted in reduced PCL particle sizes and broadened distributions, which could be improved by tailoring the electrospraying processing parameters, namely by reducing polymer concentration and increasing flow rate. Upon micronization, protein particle size was reduced to the micrometer domain, resulting in homogenous encapsulation in electrosprayed PCL microparticles. Microparticle size distributions were shown to be the most determinant factor for protein release by diffusion and allowed specific control of release patterns.