Use Of 3D Models Research Articles

Enhancing computational fluid dynamics simulation for coronary artery disease analysis through spatial iterative modeling

Abstract Background Endothelial shear stress (ESS) critically influences the pathogenesis of coronary artery disease (CAD) by modulating the formation and progression of atherosclerotic lesions. Despite the use of 3D modeling in computational fluid dynamics (CFD) simulations to calculate ESS, the precision of these models significantly depends on the method of reconstruction. Spatial Iterative Method (SIM) extends the iterative approach in computer science to spatial data, using recurring algorithms to refine 3D models and analyses. Iterative approach executes a sequence of instructions repeatedly until a certain condition is met, enabling progressive problem-solving. Purpose In this study, we investigated the application of the SIM to estimate ESS in coronary arteries and explored Atherosclerotic Plaque Areas (APA) in patients with CAD. Methods We analyzed fifteen patients (9 males, mean age of 63 ± 10.56 years) with atherosclerotic plaque on coronary arteries. The eighteen images captured from an anterior viewpoint in 10-degree increments of the coronary artery obtained from Coronary Computed Tomography Angiography at the best diastolic phase for each patient were used. We implemented the SIM for 3D model reconstruction, facilitating ninety comparisons across all iterations to evaluate ESS estimations accurately. (Figure 1.) Results In our study, we evaluated ESS contours from CFD simulations for a total of 282 APA (200 calcified and 82 soft plaques) across ninety spatial iterations. We categorized ESS into three groups: low (162 APA cases with ESS of less than 1 Pascal (Pa)), medium (67 APA cases with ESS between 1 and 2 Pa), and high (53 APA cases with ESS greater than 2 Pa). There was a significant association between ESS categories and plaque types (p < 0.0001, Figure 2.). The calcified plaques were formed in areas with low ESS (%80 of calcified plaques) and soft plaques in areas with medium and high ESS (%97 percent of soft plaques). Conclusion The significant association between ESS categories and plaque types shows the potential of SIM in hemodynamic analysis. This finding highlights the potential of SIM in enhancing the understanding of hemodynamic influences on plaque formation, offering a promising direction for future cardiovascular research.Figure 1.Sample Iteration of the SIMFigure 2.Heatmap of ESS vs. APA

3D modeling in land management design

The article substantiates the relevance of using 3D visualization of land management objects at the pre-design stage, examines the process of designing land use of the Kozlovskaya PSPP (pumped storage power plant) of the Chuvash Republic with the development of a 3D model in AutoCAD Civil 3D. The use of 3D modeling and visualization provides additional opportunities for the presentation of objects and decision-making, allowing to reduce the costs of the project by 1.5-2 times.

PROCEDURE FOR IDENTIFYING ARTILLERY MEANS OF DESTRUCTION

For evidence in the International Criminal Court of the crimes of the Russian Federation for strikes on civilian infrastructure, substantial evidence is required. Indeed, indisputable evidence includes fragments of missiles and munitions found at the sites of impact. The article presents the procedure for identifying enemy artillery means of destruction, which consists of eight stages. The procedure for identifying artillery means of destruction from fragments found at the scene should be comprehensive, including the determination of the type of munition, identification of the probable area of enemy firing positions from which the strike was conducted, and should include the following stages: inspection of the crater to collect informative fragments; determination of the type of munition; identification of the type of artillery system from which the fire was conducted; determination of the direction from which the artillery shell was fired; identification of the probable area of enemy firing positions. The use of 3D models for reconstructing the shell casing has been proposed, which will enable the identification of enemy types of munitions much faster and without the need for laboratory analysis. Based on the results of the munition type identification, an expert report is compiled, which may also include the names of individuals involved in the crime. Step-by-step execution of the stages in the procedure for identifying artillery shell explosions, starting with working at the crater and ending with comparative measurements, including the use of 3D models, will optimize and facilitate the work of experts at the scene and speed up the process of providing information to investigators. Additionally, applying the stages of the procedure will enable the creation of a database of identified fragments for further study and comparison during the experts' work. Thus, the proposed procedure for identifying fragments of enemy artillery munitions collected from the scene will significantly ease the work of military personnel and forensic experts, facilitate cooperation between forensic laboratories and law enforcement agencies at both national and international levels, and ultimately contribute to the successful investigation of war crimes.

Impact of 3D-Printed Anatomical Models on Doctor-Patient Communication in Orthopedic Consultations: A Randomized Clinical Trial.

Effective communication between doctors and patients is essential for treatment adherence and better clinical outcomes. Although 3D printing has advanced in medicine, its impact on doctor-patient communication still requires further investigation. This randomized clinical trial evaluated the effectiveness of 3D anatomical models as a tool to facilitate communication in orthopedic consultations. This randomized clinical trial was conducted between May 2024 and September 2024, with 46 patients randomized into two groups: 21 patients received medical explanations with the aid of 3D models, and 25 without. Patients' knowledge was assessed before and after the consultation, and the quality of communication was measured using the Communication Assessment Tool (CAT). In the group using 3D models, 76.19% of patients reported improved knowledge of their conditions, while in the group without models, the increase was 52.00%. Additionally, 14 out of 15 CAT parameters showed statistically significant differences between the groups, with p-values ranging from 0.001 to 0.021. The use of 3D models significantly improved patients' understanding and facilitated communication with doctors, proving to be an effective tool for explaining complex medical conditions.

The Three-Dimensional Model as a ‘Scientific Fact’: The Scientific Methodology in Hypothetical Reconstruction

For more than thirty years, 3D digital modelling has been used more and more widely as a research tool in various disciplinary fields. Despite this, the 3D models produced by different research, investigation, and speculation activities are still only used as a basis and as sources for the production of images and scientific contributions (papers in journals, contributions in conference proceedings, etc.) in dissemination and cultural activities, but without having yet assumed full autonomy as a ‘scientific fact’, as a product of research, or as a means of scientific debate and progress. This paper outlines the context in the field of architecture and archeology in which the use of 3D models has become increasingly widespread, reaching a level of full maturity, and how the field of hypothetical reconstruction can be characterized as an autonomous/scientific discipline through the definition and adoption of a scientific, transparent, verifiable, reusable, and refutable method. In this context, the definition of the 3D model as a product of scientific speculation and research is proposed.

An Exploration of Spatial Visualization Skills: Investigating Students' Use of 3D Models in Science Problems during Think-Aloud Interviews.

Effective spatial visualization and reasoning skills are often credited for students' success in science and engineering courses. However, students enrolled in these science courses are not always exposed to or trained properly on the best ways to utilize models to aid in their learning. Improving spatial visualization techniques with 3D models, such as molecular and DNA modeling kits, is often suggested to facilitate students' ability to conceptualize compounds in two and three dimensions. Here, we investigate what techniques students use to conceptualize 2D representations of various biomolecules with the use of 3D models by interviewing undergraduate students from various natural science and engineering disciplines in task-based, think-aloud sessions. After scoring and analyzing the participant data we explored some of the techniques used among successful scoring participants, including the use of informal models to transition between 2D and 3D. Additional techniques used by students who were able to successfully conceptualize 3D images included starting with smaller, granular details to inductively make conclusions when thinking between two and three dimensions. We find that (1) students who anchor their thinking in 3D models show a deeper level of understanding in initially solving science problems successfully, and (2) proper 3D model use and spatial visualization techniques may improve students' abilities to accurately visualize 2D and 3D representations of molecules in science courses. Our results demonstrate that implementing spatial visualization training to teach students how to effectively use 3D models may improve students' problem-solving techniques in science curricula.

Reduction of surgical complications via 3D models during robotic assisted radical prostatectomy: review of current evidence and meta-analysis

The use of 3-dimensional (3D) technology has become increasingly popular across different surgical specialities to improve surgical outcomes. 3D technology has the potential to be applied to robotic assisted radical prostatectomy to visualise the patient’s prostate anatomy to be used as a preoperative and peri operative surgical guide. This literature review aims to analyse all relevant pre-existing research on this topic. Following PRISMA guidelines, a search was carried out on PubMed, Medline, and Scopus. A total of seven studies were included in this literature review; two of which used printed-3D models and the remaining five using virtual augmented reality (AR) 3D models. Results displayed variation with select studies presenting that the use of 3D models enhances surgical outcomes and reduces complications whilst others displayed conflicting evidence. The use of 3D modelling within surgery has potential to improve various areas. This includes the potential surgical outcomes, including complication rates, due to improved planning and education.

Sublabial transmaxillary approach to the inferior aspect of the orbit.

The objective was to demonstrate the surgical steps and outcomes of the sublabial transmaxillary microsurgical approach with endoscopic assistance to treat lesions in the inferior aspect of the orbit, as well as to describe the use of patient-specific 3D models to facilitate surgical preparation and improve experience with the technique. The authors' study evaluated data from patients who underwent an endoscope-assisted sublabial transmaxillary approach for inferior orbital lesions. For 2 patients, 3D models were created for preoperative planning and assessment of the approach. Surgical steps comprised osteotomy to access the maxillary sinus, bony resection of the orbital floor, opening of the periorbital fascia, and dissecting and removing the lesion, followed by closure. The neuroendoscope was used to inspect the surgical cavity between each step. The study included 5 patients with varying visual field defects and proptosis who underwent the sublabial transmaxillary microsurgical approach with endoscopic assistance. Complete resection was achieved in all, and all patients reported improvement in visual field defects and proptosis after the procedure. No complications were observed except for transient unilateral maxillary edema noted around the incision site in 3 patients during the early postoperative period, which resolved within a few days. Histopathological examination confirmed the diagnosis of cavernous malformation in all patients. The sublabial transmaxillary approach is a direct and safe method to resect cavernous malformations at the inferior aspect of the orbit. It reduces the risk of complications associated with lateral, transcranial, and transnasal approaches that may cross critical structures. The microsurgical approach provides the benefit of two-handed dissection for lesions embedded in orbital fat, which can be challenging because of adhesions to surrounding tissues. The use of 3D models can facilitate surgical planning and enhance familiarity with the approach.

Use of 3d Modelling and Printing Capabilities in Students' Project Activities in the Study of Comparative Anatomy of Animals

Use of 3d Modelling and Printing Capabilities in Students' Project Activities in the Study of Comparative Anatomy of Animals

Evaluating the value of individualized 3D printed models for examination, diagnosis and treatment planning of cervical cancer

Background3D printing holds great potential of improving examination, diagnosis and treatment planning as well as interprofessional communication in the field of gynecological oncology. In the current manuscript we evaluated five individualized, patient-specific models of cervical cancer FIGO Stage I-III, created with 3D printing, concerning their value for translational oncology.MethodsMagnetic resonance imaging (MRI) of the pelvis was performed on a 3.0 Tesla MRI, including a T2-weighted isotropic 3D sequence. The MRI images were segmented and transferred to virtual 3D models via a custom-built 3D-model generation pipeline and printed by material extrusion. The 3D models were evaluated by all medical specialties involved in patient care of cervical cancer, namely surgeons, radiologists, pathologists and radiation oncologists. Information was obtained from evaluated profession-specific questionnaires which were filled out after inspecting all five models. The questionnaires included multiple-select questions, questions based on Likert scales (1 = „strongly disagree “ or „not at all useful “ up to 5 = „strongly agree “ or „extremely useful “) and dichotomous questions (“Yes” or “No”).ResultsSurgeons rated the models as useful during surgery (4.0 out of 5) and for patient communication (4.7 out of 5). Furthermore, they believed that the models had the potential to revise the patients’ treatment plan (3.7 out of 5). Pathologists evaluated with mean ratings of 3.0 out of 5 for the usefulness of the models in diagnostic reporting and macroscopic evaluation. Radiologist acknowledged the possibility of providing additional information compared to imaging alone (3.7 out of 5). Radiation oncologists strongly supported the concept by rating the models highly for understanding patient-specific pathological characteristics (4.3 out of 5), assisting interprofessional communication (mean 4.3 out of 5) and communication with patients (4.7 out of 5). They also found the models useful for improving radiotherapy treatment planning (4.3 out of 5).ConclusionThe study revealed that the 3D printed models were generally well-received by all medical disciplines, with radiation oncologists showing particularly strong support. Addressing the concerns and tailoring the use of 3D models to the specific needs of each medical speciality will be essential for realizing their full potential in clinical practice.

3D models for mohs micrographic surgery: a review on its use in patient education.

The use of a 3D model for patient education has shown encouraging results in surgical specialties like plastic surgery and neurosurgery, amongst many others; however, there is limited research on the clinical application of 3D models for Mohs Micrographic Surgery. This study delves into the utilization of 3D models for patient education in Mohs Surgery by juxtaposing different 3D modalities, highlighting their differences, and exploring potential avenues for future integration of 3D models into clinical practice. A literature search in the scientific database MEDLINE through PubMed and OVID and on the ProQuest Health & Medical Collection database was performed on the use of a 3D model for patient education. We limited the search to articles available in English and considered those mentioning the educational use of 3D models, especially for patient education, after excluding duplicate titles. We did not exclude articles based on publication year due to limited availability of literature. Utilizing 3D models for patient education within the framework of Mohs Micrographic surgery, including a 3D multicolored clay model and a 3D model accompanied by an educational video intervention, presents substantial advantages. 3D models offer a visual and tactile means to improve patients' comprehension of the Mohs procedure, the affected area, and possible outcomes. They hold the potential to reduce patient anxiety and improve decision-making. Currently, literature on the use of 3D models for patient education in Mohs Micrographic Surgery is limited, warranting further research in this area.

Simulation-Based Medical Education: 3D Printing and the Seldinger Technique

Three-dimensional (3D)-printed models with high anatomic fidelity are an increasingly viable tool in simulation-based medical education. One advantage of 3D models is they provide enhanced tactile and spatial understanding of complex anatomy to develop technical skills used in minimally invasive procedures. We propose that 3D anatomical models can improve the development of interventional radiology vascular access skills—first described in the 1950s as the Seldinger technique—for pre-clerkship medical students. The early adoption of 3D-printed technology in pre-clinical medical education can lead to improved student engagement and satisfaction when learning procedural techniques. This study involved creating a 3D model of the upper limb vasculature from an anonymized Computed tomography (CT) angiogram, using it as a medical education tool for 31 pre-clinical medical students practicing the Seldinger Technique on a prefabricated venipuncture upper limb, and assessing student satisfaction with this form of learning. Overall, attendees responded positively to the incorporation of the 3D model in medical education to improve their anatomic understanding and application of the Seldinger technique. These results indicate that the use of 3D models in simulation-based medical education can provide benefits in acquiring technical skills and the potential to decrease training costs without harming a patient.

Enhancing Online Furniture Shopping for Seniors and Physically Challenged Individuals through AR

Abstract: “Augmented reality (AR) technology has potential to revolutionize the way we interact with and visualize the world around us. One area where this technology has great potential is in the field of furniture design and home decor. The goal of the Augmented Reality Furniture project is to develop a platform which allows users to virtually preview and interact with furniture in their own home environments using AR technology. Using a smartphone or other AR-enabled device, users will be able to see how different furniture pieces will look and fit in their own living spaces before making a purchase. The project will involve the use of 3D models of a variety of furniture items, aswell as the development of AR software that can accurately place and scale these models in the user's environment. The platform will also include a user-friendly interface for browsing and selecting different furniture items, as well as tools for customizing and arranging the items in the virtual space.

Computer Patient-Specific 3D Modeling and Custom-Made Guides for Revision ACL Surgery.

Revision anterior cruciate ligament reconstruction (ACLR) is a challenging surgery occurring in 3 to 24% of primary reconstructions. A meticulous planning to study the precise size and location of both femoral and tibial bone tunnels is mandatory. The aim of the study was to evaluate the intra- and interoperator differences in the decision-making process between experienced surgeons after they were asked to make preoperative planning for ACL revision reconstruction with the use of both the computed tomography (CT) scan and a three-dimensional (3D)-printed model of the knee. Data collected from 23 consecutive patients undergoing revision of ACLR for graft failure at a single institute between September 2018 and February 2020 were prospectively reviewed. The double-blinded collected data were presented to three board-certificate attending surgeons. Surgeons were asked to decide whether to perform one-stage or two-stage revision ACLR based on the evaluation of the CT scan images and the 3D-printed custom-made models at two different rounds, T0 and T1, respectively, 7 days apart one from the other. Interoperator consensus following technical mistake was 52% at T0 and 56% at T1 using the CT scans, meanwhile concordance was 95% at T0 and 94% at T1 using the 3D models. Concordance between surgeons following new knee injury was 66% at T0 and 70% at T1 using CT scans, while concordance was 96% both at T0 and T1 using 3D models. Intraoperative variability using 3D models was extremely low: concordance at T0 and T1 was 98%. McNemar test showed a statistical significance in the use of 3D model for preoperative planning (p < 0.005). 3D-printed model reliability resulted to be higher compared with CT as intraoperator surgery technique selection was not modified throughout time from T0 to T1 (p < 0.005). The use of 3D-printed models had the most impact when evaluating femoral and tibial tunnels, resulting to be a useful instrument during preoperative planning of revision ACLR between attending surgeons with medium-high workflow.

Enhancing parental understanding of congenital heart disease through personalized prenatal counseling with 3D printed hearts.

In addition to a correct prenatal diagnosis of congenital heart disease (CHD), comprehensive parental counseling is crucial to ensure that parents are well-informed about the condition of the fetus. This study aims to investigate whether there is a significant difference in the information acquired by parents through traditional counseling, utilizing 2-dimensional (2D) illustrations and images, compared to an advanced approach utilizing personalized three-dimensional (3D) printed models of the fetal heart developed from 3D ultrasound imaging. This study, designed as a pilot randomized control trial, enrolled pregnant women with gestational ages greater than 18weeks, whose fetuses were diagnosed with CHD and referred to our center between November, 2020 and June, 2021. Two groups of patients were included in the study. The first group received standard medical counseling with 2D images and illustrations, while the second group underwent advanced counseling with 3D-printed patient-specific heart models. Both groups were then required to complete the same survey in which the knowledge of the CHD was investigated. The 3D models were created from 3D ultrasound imaging and printed using resin materials in both 1:1 and 5:1 scale. A comparison of the scores obtained from the two groups revealed that 3D visualization of the fetus's heart has the potential to increase parental knowledge about CHD and the required surgical procedures. Furthermore, all couples expressed interest in receiving a 1:1 scale model of their baby's heart. Personalized prenatal counseling with 3D-ultrasound-based heart models positively impacts parents' understanding of CHD. The use of 3D models provides a more comprehensive and accessible representation of the condition, contributing to an increased knowledge gain, and potentially helping to support informed decisions regarding their child's care.

Exploring the prospects, advancements, and challenges of in vitro modeling of the heart-brain axis.

Research on bidirectional communication between the heart and brain has often relied on studies involving nonhuman animals. Dependance on animal models offer limited applicability to humans and a lack of high-throughput screening. Recently, the field of 3D cell biology, specifically organoid technology, has rapidly emerged as a valuable tool for studying interactions across organ systems, i.e., gut-brain axis. The initial success of organoid models indicates the usefulness of 3D cultures for elucidating the intricate interactivity of the autonomic nervous system and overall health. This perspective aims to explore the potential of advancing in vitro modeling of the heart-brain axis by discussing the benefits, applications, and adaptability of organoid technologies. We closely examine the current state of brain organoids in conjunction with the advancements of cardiac organoids. Moreover, we explore the use of combined organoid systems to investigate pathophysiology and provide a platform for treatment discovery. Finally, we address the challenges that accompany the use of 3D models for studying the heart-brain axis with an emphasis on generating tailored engineering strategies for further refinement of dynamic organ system modeling in vitro.

Analyzing Pelvic Asymmetry by Sex and Ancestry: Insights From an Osteological Collection.

Pelvic asymmetry has been noted in pelvic imaging, and might influence the development of various spinal pathologies, most notably scoliosis. There is a limited understanding of the relationship between pelvic asymmetry and sex and ancestry, and limited use of 3D modeling. The purpose of this study was to identify pelvic asymmetry and morphology differences between sex and ancestry utilizing 3D modeling on young adults in an osteological collection. Thirty-three osteological pelvic specimens aged 18-25 years (average age 21.4 ± 2.0 years) were scanned to create virtual 3D models for analysis. Pelvic asymmetry and morphology were measured and compared across sex (male and female) and ancestry (European American and African American). Multivariate regression analysis was performed to examine the relationship between the variables measured. Multivariate regression analysis demonstrated statistically significant relationships between innominate-pelvic ring ratio and both sex (p < 0.001) and ancestry (p= 0.003) with larger ratios in male and African American specimens respectively. There was also a statistically significant relationship of greater sacral 1 coronal tilt in European American specimens (p= 0.042). There were no statistically significant differences with sex or ancestry in terms of innominate or sacral asymmetry. Although there are differences in overall pelvic shape between sex and ancestry, there is no relationship between these two variables versus pelvic asymmetry in the axial or sagittal planes in young adult osteological specimens.

THE USE OF A TRAINING 3D-MODEL IN THE TREATMENT OF A PATIENT WITH A PATHOLOGICAL FRACTURE OF THE PROXIMAL PART OF THE FEMUR (CASE FROM PRACTICE)

Prostate cancer is the second most common cause of malignancy in men, with bone metastases being a significant source of morbidity and mortality in advanced cases. Objective. To give a clinical example of a patient with a pathological transtrochanteric fracture of the right femur with displacement of fragments, the presence of metastasis at the fracture site, to emphasize the importance of 3D-training before surgery. Methods. A clinical example with a significant impairment of the function of the right lower extremity against the background of a significant pain syndrome is given. The diagnosis was established: pathological transtrochanteric fracture of the right femur with displacement of fragments, the presence of metastasis at the fracture site. Pre-surgical training was carried out using a 3D-model and total endoprosthetics of the right hip joint with a revision individual implant of the cement fixation type was carried out. The patient fully recovered the function of the right lower limb and hip joint, the pain syndrome was eliminated, and sleep normalized. The use of a 3D-model for preoperative training of surgeons made it possible to rationally limit traumatization of healthy tissues during tumor removal, prevent possible complications and optimize the time of surgical intervention and thus minimize blood loss. Conclusions. The use of a training 3D-model before surgery followed by prosthetics with a special oncological endoprosthesis provided satisfactory functional results and restoration of the patient's quality of life in the given clinical case. The use of a 3D-model is the key to careful preparation for surgical intervention, taking into account the individual anatomical features of the pathological process and adjacent tissues, which allows you to significantly optimize the terms of the operation and reduce blood loss, and also provides valuable experience for further surgical practice.

Polymeric nanofiber leveraged co-delivery of anti-stromal PAK1 inhibitor and paclitaxel enhances therapeutic effects in stroma-rich 3D spheroid models

The role of tumor stroma in solid tumors has been widely recognized in cancer progression, metastasis and chemoresistance. Cancer-associated fibroblasts (CAFs) play a crucial role in matrix remodeling and promoting cancer cell stemness and resistance via reciprocal crosstalk. Residual tumor tissue after surgical removal as well as unresectable tumors face therapeutic challenges to achieve curable outcome. In this study, we propose to develop a dual delivery approach by combining p21-activated kinase 1 (PAK1) inhibitor (FRAX597) to inhibit tumor stroma and chemotherapeutic agent paclitaxel (PTX) to kill cancer cells using electrospun nanofibers. First, the role of the PAK1 pathway was established in CAF differentiation, migration and contraction using relevant in vitro models. Second, polycaprolactone polymer-based nanofibers were fabricated using a uniaxial electrospinning technique to incorporate FRAX597 and/or PTX, which showed a uniform texture and a prolonged release of both drugs for 16 days. To test nanofibers, stroma-rich 3D heterospheroid models were set up which showed high resistance to PTX nanofibers compared to stroma-free homospheroids. Interestingly, nanofibers containing PTX and FRAX597 showed strong anti-tumor effects on heterospheroids by reducing the growth and viability by > 90 % compared to either of single drug-loaded nanofibers. These effects were reflected by reduced intra-spheroidal expression levels of collagen 1 and α-smooth muscle actin (α-SMA). Overall, this study provides a new therapeutic strategy to inhibit the tumor stroma using PAK1 inhibitor and thereby enhance the efficacy of chemotherapy using nanofibers as a local delivery system for unresectable or residual tumor. Use of 3D models to evaluate nanofibers highlights these models as advanced in vitro tools to study the effect of controlled release local drug delivery systems before animal studies.

Abstract 1705: 3D growth modulates the competition between STAT3 and STAT5 in breast cancer

Abstract Approximately 13% of women are diagnosed with invasive breast cancer. Signal Transducer and Activator of Transcription 3 (STAT3) is a transcription factor that is often inappropriately activated in breast cancer and is frequently associated with Triple Negative Breast Cancer (TNBC). STAT5 can also be activated and inappropriate activation of STAT5 alone or with STAT3 is generally correlated with a more favorable prognosis, a lower grade tumor, and a better response to therapies compared to inappropriate activation of STAT3 alone. Therefore, knowing the activation status of STAT5 and understanding how STAT5 activation can attenuate STAT3-driven breast cancers could help guide therapeutic choices and patient treatment. STAT3 and STAT5 can regulate a set of overlapping target genes. For example, STAT3 and STAT5 can regulate BCL6 expression, where STAT5 represses expression and STAT3 enhances it. Importantly, STAT5 outcompetes and preferentially binds in the presence of activated STAT3. This suggests that the overlapping target genes could play an important role in understanding how activation of STAT5 can lead to a more favorable breast cancer compared to activation of STAT3 alone. This previous work was conducted in a 2D cell culture model; however, 3D models can better mimic clinical settings and the use of 3D models can help bridge the gap. Therefore, understanding the relationship between STAT3 and STAT5 in 3D is important. SK-BR-3 cells (HER2+ cells with low basal STAT3 activity) and MDA-MB-231 cells (TNBC cells with constitutive STAT3 activity) are being compared between 2D cell culture and 3D media suspension. We have shown using chromatin immunoprecipitation that STAT3 DNA-binding is enhanced in 3D at certain binding sites, whereas STAT5 is not. STAT5 has reduced dominance and preferential binding over STAT3 for BCL6 in 3D compared to 2D. In other cases, STAT3 binding is decreased upon STAT5 activation in 3D but not 2D. To begin to understand these differences, we analyzed phosphorylation of these STATs in 2D and 3D. Phospho-STAT3 levels were similar between 2D and 3D in SK-BR-3 cells when activated with LIF stimulation but were higher in 3D in the MDA-MB-231 cells which contain constitutive STAT3 activity. STAT5 activation by prolactin stimulation did not directly affect STAT3 phosphorylation in 2D or 3D but does affect STAT3 binding in 3D growing cells. However, prolactin induced phospho-STAT5 seems to be reduced in 3D in both cell lines. We are currently analyzing additional binding sites to better define the differences between STAT3 and STAT5 mediated gene regulation in 2D and 3D since STAT phosphorylation does not fully address it. Overall, our data suggests that differences between 2D and 3D breast cancer models will be important for translation to patient tumors and understanding the relationship between STAT3 and STAT5 will help elucidate how STAT5 activation status can be used when treating patients with breast cancer. Citation Format: Alexandra Elizabeth Temple, Sarah R. Walker. 3D growth modulates the competition between STAT3 and STAT5 in breast cancer [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 1705.