Use In Environmental Assessment Research Articles

РОЛЬ ГОСУДАРСТВЕННОГО МОНИТОРИНГА ОКРУЖАЮЩЕЙ СРЕДЫ В ЭКОЛОГИЧЕСКОЙ ОЦЕНКЕ ОСОБО ОХРАНЯЕМЫХ ПРИРОДНЫХ ТЕРРИТОРИЙ

In the article, the authors examined the role of specially protected natural territories in the system of nature management. Summarizing domestic and foreign experience, it is possible to give a comprehensive description of specially protected natural areas, in the table. They clarified the theoretical and methodological foundations of the management of specially protected natural territories, which include the ecological and economic essence of specially protected natural territories. In their study, the authors paid special attention to the environmental assessment of specially protected natural areas based on environmental monitoring data. The informational role of environmental monitoring for the management of specially protected natural territories is revealed. To select the most rational management strategy for the eco-oriented development of specially protected natural areas, a SWOT analysis was used to identify weaknesses and strengths. Conclusions were drawn about the use of environmental assessment for the development of an environmental reference strategy.

An introduction to Criteria for Reporting and Evaluating Exposure Datasets (CREED) for use in environmental assessments.

Risks posed by environmental exposure to chemicals are routinely assessed to inform activities ranging from environmental status reporting to authorization and registration of chemicals for commercial uses. Environmental risk assessment generally relies on two key values generated from exposure data and ecotoxicity data. Data sets of measured concentrations of chemicals in environmental matrices, referred to here as exposure data, are widely used to support environmental risk management, decision-making, and reporting, such as for chemical screening, ecological or human health risk assessments, and establishment of guidelines. Practitioners have developed schemes to determine the suitability of ecotoxicity data for specific purposes, focused on evaluating reliability and relevance, but analogous schemes are not available for exposure data. Moreover, regulatory guidance arguably provides less resolution on reporting and evaluating exposure data sets compared to ecotoxicity data. The evaluation of exposure data sets is subject to limitations from variable or unreported data quality objectives and/or from differences in expert judgments, potentially introducing bias and leading to decisions based on flawed and/or inconsistent information. Exposure data sets should be evaluated for reliability and relevance prior to use in environmental assessments. This paper is the first of a four-paper series detailing the outcomes of a Society of Environmental Toxicology and Chemistry technical workshop that has developed Criteria for Reporting and Evaluating Exposure Datasets (CREED). The workshop participants developed practical, systematic criteria for consistent and transparent evaluation of the reliability (quality) and relevance (fitness for purpose) of exposure data. This guidance should apply to many different (unspecified) purposes of assessment. CREED can be used to evaluate existing data sets, but can also inform data generators interested in improving their data collection and reporting to maximize data utility to other users. This first paper details existing frameworks for the evaluation of exposure data sets and demonstrates the need for CREED, drawing from different regulatory assessments, and describes the technical workshop. Integr Environ Assess Manag 2024;20:975-980. © 2024 SETAC.

MarINvaders: A web toolkit of marine species for use in environmental assessments

AbstractInvasive species are the second most important reason for species extinction since 1500 ad. In addition, these invasive species can cause vast economic loss. In marine ecoregions, alien species introductions are increasing, and those that become invasive have caused profound changes in many marine ecoregions. We compiled a database consisting of information about where species are alien, where they are not, and which species are listed as threatened by invasive species. In addition, we developed an interactive Webapp for visualizing and analyzing the results. We used the Ocean Biogeographic Information System (OBIS) for identifying the presence of a species in a marine ecoregion. Information from the World Register of Marine Species (WoRMS), the Global Invasive Species Database (GISD), and the Nature Conservancy database on marine invasive species (NatCon) was used to identify the names and locations of marine alien species. Information from the International Union for Conservation of Nature (IUCN) Red List revealed which species are considered to be threatened by invasive species. Our database lists 112,399 marine species, of which 966 are alien species and 1655 are listed as threatened by invasive species by the IUCN. These are distributed throughout 225 marine ecoregions (97% of marine ecoregions). Our results confirm previous studies about the prevalence of alien and invasive species and provide an up‐to‐date status about known and recorded species and their distribution. This information can be used as a fundament for developing impact assessment models and identifying management strategies to combat marine invasive species.

Impacts of Ethiopia Dam on Vegetation and Water and Ecological Countermeasures

Ethiopia is one of the highest lying countries in Africa, known as the “Roof of Africa”. The Grand Ethiopian Renaissance Dam is established to solve the problem of electricity shortage, storing and supplying water. This study analyzes the impacts of the Renaissance Dam in Ethiopia on vegetation and water through random forest model and index map via semi-automatic classification module of QGIS’s plugin. Results show that area of vegetation around the dam decreases and the water area increases during dam construction. Based on previous studies, the dam has variable impacts on surrounding vegetation, water quality and level. Renaissance dam has had a negative impact on the surrounding vegetation and water level for decades of construction, but a positive impact on the water quality. Considering the ecological system and sustainable development as the ultimate goal, it needs to make full use of environmental assessment and establish the ecological operation mode of dam for achieving better results.

Influence of Selected Environmental Parameters on Rove Beetle (Coleoptera: Staphylinidae) Communities in Central European Floodplain Forests

Wetlands and especially floodplain forests belong to the most endangered ecosystems in Europe, characterized by complex dynamics of flood and dry periods and providing specific irreplaceable habitats for many organisms, including bioindicators. Many rove beetle species, for instance, are well-known detectors in monitoring ecological change, however, their use in environmental assessment requires to expand the insufficient knowledge on ecological environmental particularities of their assemblages. Therefore, we compared the rove beetle communities in eight habitats of floodplain forests from 2015 to 2016. Staphylinids were sampled by pitfall trapping. We compared the rove beetle taxocoenoses in the floodplain forests and their ecotones alongside three rivers (Danube, Tisa and Begej). We evaluated the impact of plant diversity and cover of vegetation layers, area, circumference and age of forest stands, distance to the forest edge, thickness of the litter layer, physical and chemical properties of soil and leaf litter (conductivity, pH, P, N, H, C) and anthropogenic impact on structure of rove beetle communities. We recorded significant interactions between total dynamic activity of rove beetles and number of plant species in shrub vegetation layer. Species richness was significantly positively correlated with number of plant species in shrub vegetation layer and soil pH, and negatively with relative H content of soil. We did not find any significant correlation between Shannon diversity, but evenness was negatively linked with species richness of plant communities in shrub layer.

Same same, but different: The response of diatoms to environmental gradients in Fennoscandian streams and lakes – barcodes, traits and microscope data compared

We developed and compared the performance of freshwater benthic diatom indices calculated from (i) traditional morphological species identification, (ii) Amplicon Sequence Variants (ASVs) obtained via DNA metabarcoding, and (iii) morphological traits to indicate eutrophication in rivers and lakes in Fennoscandia. Based on the results, we provided recommendations for the future routine use of diatom bioassessment tools in environmental monitoring and assessment. Our results show that ASVs are the most promising candidates to be used in environmental assessment. Indices based on ASVs correlated better with TotP concentrations than morphological taxa data, whereas the trait indices correlated least. We could see by studying the taxonomic assignments of the ASVs that traditional morphotaxa were divided up into several ASVs with different ecological profiles, which explained part of the better index performance and also encourages further studies on diatom diversity and ecological preferences. In general, ASV- and morphotaxon-specific optima differed slightly between streams and lakes, but were significantly correlated with each other. This means that it should be possible to develop a common index that is applicable in both streams and lakes, but boundary values with respect to TotP might need to be set separately for them. More knowledge on diatom traits is required to enable their use for environmental assessment.

Scientific and budgetary trade-offs between morphological and molecular methods for deep-sea biodiversity assessment.

Deep-sea biodiversity, a source of critical ecological functions and ecosystem services, is increasingly subject to the threat of disturbance from existing practices (e.g., fishing, waste disposal, oil and gas extraction) as well as emerging industries such as deep-seabed mining. Current scientific tools may not be adequate for monitoring and assessing subsequent changes to biodiversity. In this paper, we evaluate the scientific and budgetary trade-offs associated with morphology-based taxonomy and metabarcoding approaches to biodiversity surveys in the context of nascent deep-seabed mining for polymetallic nodules in the Clarion-Clipperton Zone, the area of most intense interest. For the dominant taxa of benthic meiofauna, we discuss the types of information produced by these methods and use cost-effectiveness analysis to compare their abilities to yield biological and ecological data for use in environmental assessment and management. On the basis of our evaluation, morphology-based taxonomy is less cost-effective than metabarcoding but offers scientific advantages, such as the generation of density, biomass, and size structure data. Approaches that combine the two methods during the environmental assessment phase of commercial activities may facilitate future biodiversity monitoring and assessment for deep-seabed mining and for other activities in remote deep-sea habitats, for which taxonomic data and expertise are limited. Integr Environ Assess Manag 2022;18:655-663. © 2021 SETAC.

Molecular versus morphological data for benthic diatoms biomonitoring in Northern Europe freshwater and consequences for ecological status

Diatoms are known to be efficient bioindicators for water quality assessment because of their rapid response to environmental pressures and their omnipresence in water bodies. The identification of benthic diatoms communities in the biofilm, coupled with quality indices such as the Indice de polluosensibilité spécifique (IPS) can be used for biomonitoring purposes in freshwater. However, the morphological identification and counting of diatoms species under the microscope is time-consuming and requires extensive expertise to deal with a constantly evolving taxonomy. In response, a molecular-based and potentially more cost-effective method has been developed, coupling high-throughput sequencing and DNA metabarcoding. The method has already been tested for water quality assessment with diatoms in Central Europe. In this study, we applied both the traditional and molecular methods on 180 biofilms samples from Northern Europe (rivers and lakes of Fennoscandia and Iceland). The DNA metabarcoding data were obtained on two different DNA markers, the 18S-V4 and rbcL barcodes, with the NucleoSpin Soil kit for DNA extraction and sequenced on an Ion Torrent PGM platform. We assessed the ability of the molecular method to produce species inventories, IPS scores and ecological status class comparable to the ones generated by the traditional morphology-based approach. The two methods generated correlated but significantly different IPS scores and ecological status assessment. The observed deviations are explained by presence/absence and abundance discrepancies in the species inventories, mainly due to the incompleteness of the barcodes reference databases, primer bias and strictness of the bioinformatic pipeline. Abundance discrepancies are less common than presence/absence discrepancies but have a greater effect on the ecological assessment. Missing species in the reference databases are mostly acidophilic benthic diatoms species, typical of the low pH waters of Northern Europe. The two different DNA markers also generated significantly different ecological status assessments. The use of the 18S-V4 marker generates more species inventories discrepancies, but achieves an ecological assessment more similar to the traditional morphology-based method. Further development of the metabarcoding method is needed for its use in environmental assessment. For its application in Northern Europe, completion and curation of reference databases are necessary, as well as evaluation of the currently available bioinformatics pipelines. New indices, fitted for environmental biomonitoring, should also be developed directly from molecular data.

Environmental Assessments of Offshore Carbon Capture and Storage (CCS) Sites Using Unmanned Surface Vehicles (USV)

Understanding the environmental context of potential subsea CO2 storage projects is a challenging task that requires the development of risk-based environmental monitoring to address public assurance, as well as regulatory requirements. A core need is an understanding and quantification of background environmental variability in relation to the likelihood of detection from putative release. Unmanned surface vehicle (USV) technology is rapidly evolving, with a number of USV platforms available that can meet a variety of needs in ocean observing. Advanced sensor technologies integrated on USVs promise coverage and flexibility for sustained observations at space and time scales not previously achievable. This paper describes CSIRO research with USVs in support of CCS environmental monitoring studies in Australia. CSIRO utilises a range of autonomous systems, including autonomous underwater vehicles, remotely operated vehicles and robotic profiling floats as part of its observing capabilities. For CCS studies, CSIRO is partnering with Saildrone Inc. to provide a flexible platform that houses a suite of sensors for environmental assessments at offshore CCS sites. The Saildrone platforms have been designed to accommodate sensors for detection of three important monitoring types: seawater carbon dioxide, bubble acoustics and water quality. The Saildrones can be used for long-range reconnaissance in a broad range of sea conditions and with up to 6-month deployment durations. Each Saildrone platform and its science systems can be operated remotely, with data transmitted back to shore via satellite to allow real-time monitoring of changes in the marine environment. The rapid deployment and response of the platform allows for more detailed investigation of features identified during surveys and of anomalies that exceed the known variability in measured variables. The combination of the platform with fixed measurements, such as those collected using more traditional oceanographic moorings, provides new capability to assess variability at CCS sites over a larger survey area than has been possible before. The sensor systems fitted to the Saildrone and the land based calibration and maintenance support facilities are state of the art. The carbon sensor suite delivers pH, pCO2 and dissolved oxygen. It is based on a robust system proven to work in the field over long periods and includes reference gas and transmission of multiple diagnostic parameters to ensure sensor performance and calibrations are maintained. The acoustic sensors use a two-frequency split beam system operating at 38 kHz and 2002 kHz that can detect low concentrations of bubbles in the water column. It will be possible to detect and monitor potential or reported bubble plumes over time to determine the cause. In this way reducing false alarms where under certain circumstances aggregations of fish or zooplankton can be mistakenly interpreted as a bubble plume. Sensors for sub-surface bio-optics to assess water column plankton (chlorophyll and particle backscatter), oceanographic (temperature and salinity) and meteorological data are also incorporated into the real-time data streams delivered from the Saildrone. This paper will provide an overview of the sensor configuration and performance capabilities of the USVs for use in environmental assessments to support CCS. Sea trial and other data including CCS monitoring strategies will be presented. Finally, the paper will discuss potential future uses of the platform for ongoing monitoring of CCS sites.

Knowledge of and Preparedness for Use of Environmental Assessments in Shelters During Disasters: Results of the 2013 State and Territorial Use of Shelter Assessments Survey.

Environmental health assessments of disaster shelters are critical for monitoring the living conditions of the occupants. However, knowledge and levels of utilization of these assessments have never been estimated in the United States or its territories. We aimed to conduct a cross-sectional survey to ascertain knowledge and Utilization of environmental health disaster shelter assessments. The State and Territorial Use of Shelter Assessments Survey (STUSA) of environmental health department directors (N=56) was carried out in 2013. Survey responses were received from 55 of 56 targeted jurisdictions. Of those respondents, 92% of state jurisdictions and 100% of territories reported having knowledge about shelter assessments. However, only 40% of states and 60% of territories reported receiving formal training, and 53% of states and 50% of territories reported having operational procedures for shelter assessments. High levels of knowledge and familiarity and low levels of training and processes for operationalizing assessments were assessed. Because environmental health assessments may provide useful information in disaster settings, we need to understand the barriers to their implementation. The results of these assessments may also help to validate their usefulness in protecting shelter occupants during disasters. (Disaster Med Public Health Preparedness. 2017;11:11-14).

Professionals’ knowledge and use of environmental assessment in an architectural competition

ABSTRACTIn early design phases, architects, landscape architects and urban planners are key actors whose decisions determine the environmental impact of planning and building projects. Environmental and sustainability assessment tools for buildings and neighbourhoods have been developed to promote sustainable building, but their usage has not been thoroughly evaluated. This study investigated self-reported knowledge and usage of such tools among competitors and jury group from 10 European countries involved in the international architectural competition ‘A New City Centre for Kiruna’ in Sweden. The questionnaire revealed that 13% used environmental assessment tools or management systems in the competition, although 47% had used them previously. Tool users reported greater knowledge of how to handle environmental impacts than non-users. However, the self-rated experience of handling various environmental impacts, in the competition and in general, was low for both groups. Nevertheless, the self-rated importance of environmental impacts was high among all participants. Based on this study, it is concluded that environmental assessment tools, issues and goals can be better integrated into the processes of early design in planning and building projects, and in architectural competitions. Furthermore, to limit environmental impacts in building and planning projects, professionals need to be educated about environmental strategies and solutions.

CONSIDERATION OF LIFE CYCLE ENERGY USE AND GREENHOUSE GAS EMISSIONS IN ROAD INFRASTRUCTURE PLANNING PROCESSES: EXAMPLES OF SWEDEN, NORWAY, DENMARK AND THE NETHERLANDS

Energy use and greenhouse gas (GHG) emissions associated with life cycle stages of road infrastructure are currently rarely assessed during road infrastructure planning. This study examines the road infrastructure planning process, with emphasis on its use of Environmental Assessments (EA), and identifies when and how Life Cycle Assessment (LCA) can be integrated in the early planning stages for supporting decisions such as choice of road corridor. Road infrastructure planning processes are compared for four European countries (Sweden, Norway, Denmark, and the Netherlands). The results show that only Norway has a formalised way of using LCA during choice of road corridor. Only the Netherlands has a requirement for using LCA in the later procurement stage. It is concluded that during the early stages of planning, LCA could be integrated as part of an EA, as a separate process or as part of a Cost-Benefit Analysis.

Scale morphology of Prochilodus lineatus with emphasis on the scale epithelium

The fish body is entirely covered by a thin, smooth and glandular epidermis, closely attached to the scales inserted on the dermis. The descriptive work on this tissue dates to twenty or thirty years ago, bears very little photographic record and does not focus on the scale epithelium, despite the fact that it is in direct contact with the environment. Thereupon, the present study characterizes the scale epithelium of Prochilodus lineatus, a robust species of fish. The observations show that the scale is completely covered by epithelium thicker on the proximal end of the scale, multilayered on the dorsal surface and undifferentiated on the ventral surface, and covered by mucous producing cells, mostly acid mucous. The scale is formed by plywood-like collagen matrix of collagen type III and supported by a network of elastic fibers on the ventral face. Differentiated cellular types are present, such as club cells, considered to be responsible for the release of alarm substances, which suggests possible use in environmental assessment as a non-invasive technique.

Combining environmental assessment and contact investigations to make tuberculosis screening decisions

A combination of environmental measurement and mathematical modelling may provide a more quantitative method to inform the tuberculosis (TB) screening process in non-household settings following diagnosis of an infectious case. To explore different methods for environmental assessment and mathematical modelling to predict TB transmission risk and devise a tool for public health practitioners for use in TB investigations. Parameters including air flow, carbon dioxide (CO(2)) and airborne particles were measured over 3 working days in an office with a staff member with infectious TB. The Wells-Riley model was applied to predict transmission rates. The results suggested that poor ventilation and well-mixed air led to equal exposure of staff members to airborne TB bacilli. The model's prediction of attack rate (42%) supported the actual number of infections that occurred (50%). This study supports the use of environmental assessment and modelling as a tool for public health practitioners to determine the extent of TB exposure and to inform TB screening strategies. CO(2) and airborne particle profiles, both measured via a handheld device, provide the greatest practicality and amount of information that public health practitioners can use. Further studies will validate the level of screening required related to these measurements.

Hydra, a model system for environmental studies

Hydra have been extensively used for studying the teratogenic and toxic potential of numerous toxins throughout the years and are more recently growing in popularity to assess the impacts of environmental pollutants. Hydra are an appropriate bioindicator species for use in environmental assessment owing to their easily measurable physical (morphology), biochemical (xenobiotic biotransformation; oxidative stress), behavioural (feeding) and reproductive (sexual and asexual) endpoints. Hydra also possess an unparalleled ability to regenerate, allowing the assessment of teratogenic compounds and the impact of contaminants on stem cells. Importantly, Hydra are ubiquitous throughout freshwater environments and relatively easy to culture making them appropriate for use in small scale bioassay systems. Hydra have been used to assess the environmental impacts of numerous environmental pollutants including metals, organic toxicants (including pharmaceuticals and endocrine disrupting compounds), nanomaterials and industrial and municipal effluents. They have been found to be among the most sensitive animals tested for metals and certain effluents, comparing favourably with more standardised toxicity tests. Despite their lack of use in formalised monitoring programmes, Hydra have been extensively used and are regarded as a model organism in aquatic toxicology.

Interactions between hypoxia and sewage-derived contaminants on gene expression in fish embryos

Fish embryos were used to evaluate the interaction among common environmental and chemical stressors found in urban coastal environments, namely hypoxia, aryl hydrocarbon receptor (AhR) agonists, and estrogenic compounds. At the molecular level, the systems responding to these stressors share common response factors, and evidence exists for cross-talk between them. Biomarkers of exposure to these stressors, cytochrome P4501a ( Cyp1a), estrogen receptor alpha ( ERα), brain cytochrome P450 aromatase ( Cyp19a2 or AromB), and hypoxia inducible factor 1 alpha ( Hif-1α) mRNA expression were examined using qRT-PCR simultaneously in embryos of two well studied species, the Atlantic killifish, Fundulus heteroclitus, and the zebrafish Danio rerio. Embryos of both species were exposed to the model Cyp1a inducer β-naphthoflavone (BNF) or 17-β estradiol (E2) under either normoxic or hypoxic (5% oxygen atmosphere) conditions and harvested prior to hatch at 9 days post fertilization (dpf) for the killifish, and 48 h post fertilization (hpf) for the zebrafish. BNF significantly induced Cyp1a expression in embryos of both species with killifish embryos being more responsive (700-fold > control) than zebrafish embryos (7-100-fold > control). AromB was also significantly influenced by treatment, but to a lesser extent, with mean expression levels increased by less than two-fold over control values in response to E2, and in one case upregulated by BNF. ERα and Hif-1α were constitutively expressed in embryos of both species, but expression was unaffected by exposure to either BNF or E2. Hypoxic conditions downregulated AromB expression strongly in killifish but not in zebrafish embryos. The impact of hypoxia on expression of other genes in either species was inconsistent, although an interactive effect between hypoxia and BNF on several of the genes evaluated was observed. These data are the first to examine expression patterns of these important environmental response genes together in embryos of two important model fish species. The results support the use of Cyp1a expression as a biomarker of AhR agonists in fish embryos, and indicate that AromB may be more responsive than ERα to estrogenic chemicals at this stage in development. Hif-1α expression was not found to be a good biomarker of hypoxic exposure in either killifish or zebrafish embryos. The interaction observed between BNF and co-exposure to hypoxia warrants further investigation. Finally killifish embryos are generally more sensitive than zebrafish embryos at this stage of development supporting their use in environmental assessments.

Engaging Participants in Design of a Native Hawaiian Worksite Wellness Program

Native Hawaiians today face a disproportionately high rate of obesity. The Designing Healthy Worksites (DHW) project investigated existing administrative policies and supports for healthy eating and physical activity at eight Native Hawaiian-serving organizations in Hawai'i, along with employee preferences for worksite wellness programming. We describe the process by which Native Hawaiian researchers and community members worked together to gather formative data to design future worksite wellness programs. A Native Hawaiian doctoral student (JHL) and a Native Hawaiian activist (CKH) spearheaded the project, mentored by a Caucasian professor (KLB) who has worked in Hawaii communities for 30 years. Advisors from the worksites supported the use of environmental assessments (n = 36), administrative interviews (n = 33), focus groups (n = 9), and an employee survey (n = 437) to collect data. We used an interactive process of data collection, sharing, and interpretation to assure mutual agreement on conclusions and future directions. Worksites were at different stages of readiness for worksite wellness programming, suggesting that a toolkit be developed from which agencies could create a program that fit. Activities preferred by large proportions of employees included support groups, experiential nutrition education (e.g., cooking demonstrations and field trips for smart food shopping), food buying clubs, and administrative policies supporting healthy lifestyles. High participation in data collection and interpretation suggest that our methods fostered enthusiasm for worksite wellness programming and for Native Hawaiians as researchers. The team continues to work together to develop and test interventions to promote worksite wellness. Native-directed research that engages administrators and employees in designing programs heightens program acceptability and applicability.

Modelling representative and coherent Danish farm types based on farm accountancy data for use in environmental assessments

There is a need for valid and representative data on the production, resource use and emissions from different farm types in Denmark for public regulation and assessment. The data should be usable for both area-based environmental assessment (e.g. nitrate leaching per ha) and product-oriented environmental assessment (e.g. greenhouse gas emissions per kg pork). The objective of this study was to establish a national agricultural model for estimating data on resource use, production and environmentally important emissions for a set of representative farm types. Every year a sample of farm accounts is established in order to report Danish agro-economical data to the 'Farm Accountancy Data Network' (FADN), and to produce 'The annual Danish account statistics for agriculture'. The farm accounts are selected and weighted to be representative for the Danish agricultural sector, and similar samples of farm accounts are collected in most of the European countries. Based on a sample of 2138 farm accounts from year 1999 a national agricultural model, consisting of 31 farm types, was constructed. The farm accounts were grouped according to the major soil types, the number of working hours, the most important enterprise (dairy, pig, different cash crops), livestock density, etc. For each group the farm account data on the average resource use, products sold, land use and herd structure were used to establish a farm type with coherency between livestock production, feed use, land use, yields, imported feed, homegrown feed, manure production, fertilizer use and crop production. The set of farm types was scaled up to national level thus representing the whole Danish agricultural sector and the resulting production, resource use and land use was checked against the national statistics. Nutrient balance methodology and state-of-the-art emission models and factors were used to establish the emissions of nitrate, phosphate, ammonia, nitrous oxide, methane and fossil carbon dioxide from each farm type. In this paper data on resource uses and emissions from selected farm types are presented and it is demonstrated that this approach can lead to an agro-environmental inventory, which is consistent with national level estimates and still has the advantage of being disaggregated to specific farm types. Conventional dairy farm types in general emitted more nitrate but less phosphate compared with pig farm types. The methane emission was higher from dairy farm types compared with all other farm types. In general the conventional dairy farms emitted more nitrate, ammonia, and nitrous oxide, compared with organic dairy farms.

Falls in the Nursing Home: Are They Preventable?

Falls are prevalent in elderly patients residing in nursing homes, with approximately 1.5 falls occurring per nursing home bed-years. Although most are benign and injury-free, 10% to 25% result in hospital admission and/or fractures. Primary care providers for nursing home residents must therefore aim to reduce both the fall rate as well as the rate of fall-related morbidity in the long-term care setting. Interventions have been demonstrated to be successful in reducing falls in community-dwelling elderly patients. However, less evidence supports the efficacy of fall prevention in nursing home residents. The authors conducted a Medline search using the key words Falls and Nursing Homes. Several studies examined the efficacy of multifaceted intervention programs on reducing falls in nursing homes with varied results. Components of these intervention programs include: environmental assessment, assistive device evaluation and modification, medication changes, gait assessment and training, staff education, exercise programs, hip protector use, and blood pressure evaluation. Current literature supports the use of environmental assessment and intervention in reducing falls in nursing homes, and demonstrates an association between certain medications and falls. However, there are no studies that examine the effect of medication adjustments on fall rates. Also, the literature does not strongly suggest that exercise programs are effective in fall reduction. Although not effective in reducing fall rates, the use of hip protectors appears to result in less fall-related morbidity. More studies must be done to clarify the effects of high-risk medication reduction, the optimal nature and intensity of exercise programs, and patient targeting criteria to maximize the effectiveness of nursing home fall prevention programs. Based on the current literature, an effective multifaceted fall prevention program for nursing home residents should include risk factor assessment and modification, staff education, gait assessment and intervention, assistive device assessment and optimization, as well as environmental assessment and modification. Although there is no association between the use of hip protectors and fall rates, their use should be encouraged because the ultimate goal of any fall prevention program is to prevent fall-related morbidity.

Modelling Nitrogen Deposition on a Local Scale—A Review of the Current State of the Art

Abstract. Local ammonia emissions from agricultural activities are often associated with high nitrogen deposition in the close vicinity of the sources. High nitrogen (N) inputs may significantly affect the local ecosystems. Over a longer term, high loads may change the composition of the ecosystems, leading to a general decrease in local biodiversity. In Europe there is currently a significant focus on the impact of atmospheric N load on local ecosystems among environmental managers and policy makers. Model tools designed for application in N deposition assessment and aimed for use in the regulation of anthropogenic nitrogen emissions are, therefore, under development in many European countries. The aim of this paper is to present a review of the current understanding and modelling parameterizations of atmospheric N deposition. A special focus is on the development of operational tools for use in environmental assessment and regulation related to agricultural ammonia emissions. For the often large number of environmental impact assessments needed to be carried out by local environmental managers there is, furthermore, a need for simple and fast model systems. These systems must capture the most important aspects of dispersion and deposition of N in the nearby environment of farms with animal production. The paper includes a discussion on the demands on the models applied in environmental assessment and regulation and how these demands are fulfilled in current state-of-the-art models.