Usage Of Fibers Research Articles

Carbon Fiber Reinforced Polymer (CFRP) Laminates: Flexural Strengthening Method for Prestressed Concrete Beams with Anchorage Loss

Abstract Post-tensioning (PT), a method of pre-stressing, involves the use of high-strength steel strands/ tendons to reinforce concrete or other materials. On the contrary, Carbon Fiber-Reinforced Polymers (CFRP) are lightweight, high-strength materials with used to strengthen concrete structures by adhering the polymer to the concrete element. Challenges with post-tensioned elements include reverse curvature of the post-tensioning strands, tendon misplacement, and frequent damage in the anchorage and dead-end zones. These difficulties frequently cause bulging of the surrounding concrete, even at lower stress levels, and can lead to concrete bursting when tension exceeds certain threshold. This study investigates into the potential of CFRP strengthening technique to improve the flexural capacity of post-tensioned concrete beams with anchorage loss. Through an experimental program, the study compares the performance of control beams to those reinforced with different layers of CFRP. The results of this study demonstrated that there was a significant increase in flexural capacity, ranging from 45.31% to 78.62% for single layers and 87.17% to 153% for double layers of CFRP sheet. Additionally, the research examines how different levels of prestressing and CFRP wraps influence crack formation and delamination patterns of carbon fiber, with promising results. It was also noted that optimal usage of CFRP fibers and tendons is found to be critical. The study suggests exploring alternative fiber types and orientations for future study.

Compressive strength study of fibre reinforced concrete

Abstract Materials play a vital role in the development of human life. Environmental and sustainable development concerns have seriously affected the development and applications of materials. Due to the advancement of rapid growth, it leads to the utilization of more materials, which leads to the depletion of natural materials. So, this leads the researchers to focus on the materials that have less impact on the environment. This study focuses on the compressive strength-based study of M30-grade fiber-reinforced concrete, partially replacing cement with flyash, fine aggregate with cocopeat, and adding coir fiber as a fiber. In recent times, there has been a tremendous increase in the usage of several natural fibers because of their low cost, ease of processing, and environmental friendliness. Due to their availability and eco friendliness, they are used in the development of fiber-reinforced concrete to improve its strength. The experiment entails casting and curing of different concrete mixtures for 3, 7, and 28 days with varying percentages of coconut fiber and cocopeat, 30% replacement of cement with flyash, and performing compressive strength tests in accordance with IS standards. Test results show adding 1% of coir fiber attains more strength in comparison with normal concrete and concrete with partial replacement of cement with fly ash and fine aggregate with cocopeat.

Optimizing dielectric constant of noncommercial biobased fibres - Acacia Nilotica, Acacia Leucophloea and Prosopis juliflora - For composite applications with selected fillers

In recent decades, most electrical/electronic products possess non – biodegradable components. The expanding consumption of these goods and their eventual disposal pose a serious environmental threat. To cope up with this issue, biodegradable electrical/electronic components using biobased fibres can be an alternative option. The novel exploration of this research work is the usage of underutilized biobased fibres, such as Acacia Nilotica, Acacia Leucophloea and Prosopis Juliflora, as sustainable alternatives to traditional synthetic fibres in natural fibre-reinforced epoxy composites. The novelty lies in the combination of these natural fibres with ceramic fillers like Silicon Carbide, Boron Nitride and Aluminium Oxide, aiming to enhance the composite properties. The objective of the study is to optimize the type of fibre, fibre content (2 wt%, 4 wt% and 6 wt%) and types of fillers (1 wt%) combinations using the Box-Behnken Design to improve the dielectric properties of these composites. Analysis of Variance (ANOVA) is used to evaluate the relevance of each parameter on dielectric constant of the biobased fibre reinforced epoxy composite. The significant outcome is identified that Prosopis Juliflora (6 wt%) combined with Boron Nitride (1 wt%) yields an optimal dielectric constant of 1.11, highlighting the potential of these biobased fibres to serve as effective substitutes for conventional glass and carbon fibres for electrical insulating materials used in switchboards and socket pins to prevent electrical conduction and ensure safety. This research not only contributes to the field of sustainable materials but also addresses critical environmental concerns associated with electric/electronic waste.

Combined effect of silica fume and various fibers on fresh and hardened properties of concrete incorporating HDPE aggregates

Recycling of waste plastics has become essential to mitigate their detrimental impact on the environment. However, it can be used in the construction sector to fulfill construction needs and conserve natural resources. Previous research has demonstrated that incorporating plastic aggregate reduces the strength properties of concrete; hence, there is a need to improve its strength properties. In this study, high-density polyethylene (HDPE) plastic is incorporated in aggregate form, as a partial substitute for natural coarse aggregates (NCA) at volumetric ratios of 10 %, 30 %, and 50 %. Various strength enhancement techniques, including the addition of macro synthetic fibers (MSF), steel fibers (SF), and substituting 20 % of cement with silica fume, were employed. The results indicated that workability of concrete is improved with an increase in the content of HDPE coarse aggregates (HCA). Furthermore, concrete containing 30 % HCA performed better in terms of strength compared to concrete with 10 % and 50 % HCA. The findings demonstrate that concrete containing fibers performs better than concrete without fibers. The utilization of 0.75 % MSF and 1 % SF dosage leads to a 93 % improvement in splitting tensile strength, a 72 % improvement in flexural strength, and a 48 % improvement in compressive strength for concrete containing 30 % HCA. Using scanning electron microscopy, it was found that incorporating HCA weakens the internal matrix. However, the addition of a precise amount of fibers and pozzolanic materials resulted in improvements in microstructure. The significance of this research lies in the utilization of HDPE waste materials in concrete by simultaneous usage of different fibers.

Performance of novel engineered materials from nano‐silica incorporated phenol‐formaldehyde‐flax fabric hybrid composite: Thermal, wear, aging and biodegradability analysis

AbstractWith the growing awareness of environmental issues, natural fiber composites have emerged as a viable substitute for conventional polymer composites. The usage of natural fiber reinforced with nano fillers composites has increased significantly in recent years, especially in the building, automotive, and aerospace industries. This research explores the effect of nano‐silica in tribological, thermal behavior, water diffusion properties and biodegradation of flax fabric/phenol‐formaldehyde hybrid composites. We have fabricated the hybrid composites utilizing compression molding technique. The results showed that after reaching the lowest value for 4 nanosilica (NS), the volumetric wear rose when the addition of nano‐silica was increased. However, the volumetric wear decreased as the weight percentage of nano‐silica improved. At lower sliding speeds (1 m/s), the VW value is between 0.06782 and 0.05455 cm3, but at higher sliding speeds (3 m/s), it is roughly 0.09253–0.06187 cm3. The thermal stability was improved for 1 NS, 2 NS, and 3 NS is 1.20%, 1.64%, and 0.71%, respectively. At three different temperatures (30, 60, and 90°C) the impact of nano‐silica on the water diffusion behavior of PF‐flax fabric hybrid composites was examined. 2 NS showed the least amount of water sorption. it was noted that the three coefficients—Diffusion, Sorption, and Permeation‐were all declining when compared to PF‐flax fabric composites devoid of nano‐silica following computing the Arrhenius values, the free energy change was always negative, indicating the spontaneity of sorption in non‐reinforced samples. The tensile strength of every composite in this investigation was marginally changed by the water aging process.

Analysis of bamboo fibres and their associated dye on a freshwater fish host-parasite system

With the growth of the fashion and textile industries into the twenty-first century, associated pollution has become pervasive. Fibre-based microplastics are the most common types of plastics recovered from aquatic ecosystems encouraging the move towards organic fibre usage. Often marketed as biodegradable and ‘environmentally friendly’, organic textile fibres are seen as less harmful, but their impacts are understudied. Here, we assess the health effects of reconstituted bamboo-viscose fibres, processed bamboo-elastane fibres (both at 700 fibres/L) and their associated dye (Reactive Black-5, at 1 mg/L) on fish, with an emphasis on disease resistance utilising an established host-parasite system: the freshwater guppy host (Poecilia reticulata) and Gyrodactylus turnbulli (monogenean ectoparasite). Following 3 weeks exposure to the bamboo fibres and associated dye, half the experimental fish were infected with G. turnbulli, after which individual parasite trajectories were monitored for a further 17 days. Overall, exposures to reconstituted bamboo-viscose fibres, processed bamboo-elastane fibres or dye were not associated with any change in host mortality nor any significant changes in parasite infection burdens. When analysing the routine metabolic rate (RMR) of fish, uninfected fish had, on average, significantly impacted RMR when exposed to processed bamboo-elastane (increased RMR) and reconstituted bamboo-viscose (decreased RMR). Hosts exposed to reconstituted bamboo-viscose and the associated dye treatment showed significant changes in RMR pre- and post-infection. This study bolsters the growing and needed assessment of the potential environmental impacts of alternative non-plastic fibres; nevertheless, more research is needed in this field to prevent potential greenwashing.

Feasibility of Natural Fibre Usage for Wind Turbine Blade Components: A Structural and Environmental Assessment

There are two key areas of development across wind turbine blade lifecycles with the potential to reduce the impact of wind energy generation: (1) deploying lower-impact materials in blade structures and (2) developing low-impact blade recycling solution(s). This work evaluates the feasibility of using natural fibres to replace traditional glass and carbon fibres within state-of-the-art offshore blades. The structural design of blades was performed using Aeroelastic Turbine Optimisation Methods and lifecycle assessment was conducted to evaluate the environmental impact of designs. This enabled the matching of blade designs with preferred waste treatment strategies for the lowest impact across the blade lifecycle. Flax and hemp fibres were the most promising solutions; however, they should be restricted to use in stiffness-driven, bi-axial plies. It was found that flax, hemp, and basalt deployment could reduce Cradle-to-Gate Global Warming Potential (GWP) by around 6%, 7%, and 8%, respectively. Cement kiln co-processing and mechanical recycling strategies were found to significantly reduce Cradle-to-Grave GWP and should be the prioritised strategies for scrap blades. Irrespective of design, carbon fibre production was found to be the largest contributor to the blade GWP. Lower-impact alternatives to current carbon fibre production could therefore provide a significant reduction in wind energy impact and should be a priority for wind decarbonisation.

Axial behavior of UHPC columns with new emerging mixtures and varying confinement

Using advanced materials to optimize designs and make structures resilient is becoming of crucial importance. Advanced rapidly growing materials with superior mechanical properties, like ultra-high performance concrete (UHPC), can make structures better in terms of strength and service life when compared to conventional concrete. Behind the excellent performance of UHPC stands its dense packing theory and usage of steel fibers or even carbon nanofibers (CNF) in emerging UHPC mixtures. UHPC is mostly used in small-scale applications like bridge field joints and overlays, but research is extending UHPC to full structural applications such as girders and columns. To expand existing knowledge on UHPC columns and add new results from emerging and recently commercialized UHPC mixtures, this study uses, for the first time, two new UHPC mixtures with white cement and CNF enhancement to investigate axial behavior of nine full-scale columns with varying confinement. An extensive experimental program considers two groups of columns from two different mixtures with several other variables such as transverse reinforcement detailing, cross-section, and percentage of steel fibers. The paper presents results from companion material tests along with a detailed discussion of the global and local behavior of the columns, i.e. force, axial strains, reinforcement strains, and stiffness. Test results are interpreted in light of existing ACI 318 Code provisions and guidance is provided for axial design capacity estimation and transverse reinforcement detailing.

Advances of natural fiber composites in diverse engineering applications—A review

This paper emphasizes the significant usage of natural fiber as a reinforced composite in the potential engineering field. Mechanical, civil, textile, agricultural, and other engineering sectors have already initiated the utilization of natural fiber in their multiple fields. After going through some processes like treating chemically and synthesizing them accordingly, natural fiber composites are prepared for respective implementation. Unlike other types of composite materials, natural fiber composites have some unique properties like recyclability, adaptability, environmental safety, and easy persuasion. On the other hand, different types of naturally oriented fiber like jute, cotton, silk, linen, hemp, etc. have almost the same kind of mechanical, thermal, and chemical features as traditional composite materials. Additionally; automobile, marine, aerospace, medical, and recreation industries claim a significant realm in this type of material kingdom. Though moisture problems, fiber swelling, and safe reusability are threatening for natural fiber-reinforced composites, more research will certainly reduce these problems. Researchers play a significant role in the permanent solution of different applications of natural fiber composites in every engineering sector.

Effect of CaCO3 filler reinforcement on PLA matrix composites fabricated through injection moulding

Since a decade, the usage of traditional polymers and synthetic fibres has increased rapidly. Therefore, it becomes increasingly important to implement biodegradable polymer composites and strict plastic usage guidelines in order to address a range of environmental and safety issues. This article discusses in detail about the use of bio-degradable material like Poly Lactic Acid(PLA) as the matrix and calcium carbonate as the reinforcement used in preparing composite laminates through injection moulding technique.The influence of the CaCO3 on the mechanical properties, as well as the degradation behaviour of the developed specimens was explored by employing Universal testing machine (UTM) and Thermo-gravimetric analysis (TGA), respectively. The bonding of the functional compounds within the selected substances were observed through Scanning electron microscopy (SEM) and Fourier transformation infrared (FTIR) spectroscopy, respectively. The conclusions revealed that putting up to 15 wt% of CaCO3 to a PLA medium boosted the mechanical properties and the specimen containing 10 wt% of CaCO3 improved thermal persistence and received the deterioration point at nearly 245 °C–250 °C. Only traces of residue were found in the composites as determined by TGA. In conclusion, it can be said that the incorporation of powder, permitted the development of biodegradable materials with better specific properties which can possibly be leveraged in lieu of traditional resources in a variety of industrial applications.

Defining application areas of corn husk fibre by studying its characteristics.

Natural fibres have attracted more attention compared with synthetic fibre because they exhibit several benefits over synthetic fibre, such as being cost-effective, readily available, and lightweight apart from offering better mechanical properties. Corn husk fibres being a natural crop fibre have attracted more attention due to their renewability and biodegradability. Corn husk is an outer protective layer of maize which is generally discarded as waste. However, this agro-waste can be utilized exclusively for various applications with a sustainable approach by extracting fibres out of them. This paper aims to revolutionize the usage of corn husk fibres in conventional as well as technical textile industries by enlisting various application areas. A comprehensive understanding of corn husk fibre extraction techniques and their effect on various fibre properties are also discussed. These properties are compared with properties of other natural fibres, to enable the possibility of converting corn husk fibres into different textile forms such as yarn, woven and nonwoven fabric, and composites. This will fulfill the increasing demand for natural fibre along with biodegradability and reduced petroleum dependency while contributing to the purpose-driven use of agro waste.

Performance of different fibre types in alkaline-activated concrete produced with industrial wastes: volcanic rock powder and blast furnace slag

The objective of the study is to determine the effects of different fibre types and ratios on the mechanical and physical properties of alkali-activated concrete (AAC) and to optimise important properties such as workability, unit weight, water absorption, compressive strength, modulus of elasticity and abrasion resistance of these concretes. Concrete samples were produced using steel and polyester fibres at ratios of 0.25%, 0.50%, 0.75% and 1%. The fibre ratios were varied, and various tests were conducted to determine the mechanical and physical properties of the concrete samples. The experiments clearly revealed the effects of fibre types and ratios on the performance of concrete. These results clearly demonstrate the effects of different fibre types and ratios on the mechanical and physical properties of AACs. Particularly noteworthy is the water-retaining property of polyester fibres, their effect on workability and their enhancing effect on abrasion resistance. The effects of steel fibres on compressive strength and modulus of elasticity are more pronounced, but they may present disadvantages in terms of workability and abrasion resistance. It is observed that mixed fibre usage provides a good balance in some properties. This study provides a roadmap for evaluating sustainable material options in the concrete industry and guiding future research.

Enhancing the flexural performance of concrete beams with 3D-printed UHP-SHCC permanent formwork via graded fiber volume fraction

Conventional concrete structures often rely on labor-intensive and wasteful formwork systems. In contrast, 3D concrete printing (3DCP) technology offers a more efficient alternative for fabricating complex-shaped permanent formwork. This study fabricates innovative composite beams using 3D-printed ultra-high-performance strain-hardening cementitious composites (UHP-SHCC) as permanent formwork, followed by casting infill materials. The spatially tailored fiber dosage distribution in the 3D-printed UHP-SHCC permanent formwork enables the performance optimization of the composite beam. The flexural behavior of three such formed composite beams is evaluated using four-point bending tests. A reference beam with homogeneous fiber distribution in the UHP-SHCC formwork is also tested for comparison. The failure mode, overall load–displacement response, and cracking performance of four beams are comprehensively characterized and compared. The results reveal that employing graded fiber dosages in UHP-SHCC formwork enhances fiber efficiency and structural performance while reducing fiber usage and material costs. The use of 3D-printed UHP-SHCC formwork with graded fiber distribution, despite using 25% less fibers and reducing the material cost by 12.8%, leads to a 65.6% increase in strength and over 50% increase in energy absorption, or a 77.4% increase in ultimate displacement with comparable peak load to the reference beam with homogeneous fiber distribution.

Physical and Chemical Indicators of Gluten-free and Yeast-free Buckwheat Bread

Topicality. At domestic market of Ukraine, the available range of gluten-free bakery products is insufficient to meet the growing needs of consumers with various types of food allergies or genetically predisposed to celiac disease. In accordance with the growing consumers’ demand for gluten-free bread, we developed and manufactured the following types of gluten-free and yeast-free buckwheat bread from high-quality natural ingredients: with quinoa, sesame and walnut; with quinoa, sesame and dietary hemp fiber; with quinoa, sesame and dietary pumpkin fiber. Since each of the raw ingredients plays a significant role in the process of dough formation, it is advisable to study the mechanism of cooking yeast-free dough based on green buckwheat groats, with the addition of quinoa, sesame, walnut, dietary hemp and pumpkin fiber, as well as to determine physical and chemical processes taking place in the dough after its formation and ensuring the quality of finished bakery products. The aim of the article is to study the effect of the used vegetable raw materials – green buckwheat groats, quinoa seeds, sesame, walnuts, dietary hemp and pumpkin fiber – on the physical and chemical, organoleptic indicators of gluten-free bakery products. Research methods. Analytical, organoleptic, physical and chemical, structural and mechanical, mathematical and statistical methods of experimental data processing with computer technologies use were applied during this study. Results. According to the research results, physical and chemical indicators were determined, as the following: moisture mass fraction, dry materials content, acidity of the corresponding raw material: green buckwheat groats, quinoa seeds, sesame, walnuts, dietary hemp and pumpkin fiber. The moisture mass fraction of the dough and finished bread samples was determined, which was such for baked bread, in %: for experimental sample No. 1 – 53.3, for samples No. 2, 3 – 55.6, which increased, compared to the control by 2.3 % and 6.7%, accordingly. The total acidity was such, in degrees: for the experimental bread sample No. 1 – 9.4, for samples No. 2, 3 – 9.7 (it increased by 10.2% and 13.7%, accordingly, compared to the control). The fragility of buckwheat bread increased by 21.25% (sample No. 1), and by 20.25% (sample No. 2, 3), compared to rye-wheat bread. Porosity of gluten-free and yeast-free buckwheat bread improved, which was such, in %: for experimental samples: No. 1 – 70, for No. 2 and 3 (with the addition of dietary pumpkin and hemp fiber) – 72, which is by 7.7% and 10.8% better, compared to the control sample. The crumb deformation of the rye-wheat bread (control sample), and test samples of gluten-free and yeast-free buckwheat bread during storage for 4, 24, and 48 hours was determined. It was established that the total crumb deformation in the studied samples decreased within 24 hours after baking by 6.7% (sample No. 1), and 13.4% (samples No. 2, 3), after 48 hours of storage – by 8.0% (sample No. 1) and 16.0% (samples No. 2, 3), compared to the control sample. Conclusions and discussion. On the basis of the above, it can be concluded that the usage of green buckwheat groats, quinoa seeds, sesame, walnuts, dietary hemp and pumpkin fiber in the production of gluten-free and yeast-free buckwheat bread contributes to the improvement of its organoleptic characteristics, physical and chemical quality indicators, as well as allows to expand the range of gluten-free bakery products, which will conduce to improving the nutrition of the general population.

Comparative impact behaviours of ultra high performance concrete columns reinforced with polypropylene vs steel fibres

Polypropylene (PP) fibres have primarily used to control shrinkage cracks or mitigate explosive spalling in concrete structures exposed to fire or subjected to impact/blast loads, with limited investigations on capacity improvement. This study unveils the possibility of using PP micro-fibres to improve the impact behaviour of fibre-reinforced ultra-high-performance concrete (FRUHPC) columns. Results show that the addition of fibres significantly improves the impact behaviour of FRUHPC columns by shifting the failure mechanism from brittle shear to favourable flexural failure. The addition of steel or PP fibres affected the impact responses differently. Steel fibres considerably increased the peak impact force (up to 18%) while PP micro-fibres slightly increased the peak (3%–4%). FRUHPC significantly reduced the maximum mid-height displacement by up to 30% (under 20° impact) and substantially improved the displacement recovery by up to 100% (under 20° impact). FRUHPC with steel fibres significantly improved the energy absorption while those with PP micro-fibres reduced the energy absorption, which is different from the effect of PP-macro fibre reported in the literature. The optimal fibre content for micro-PP fibres is 1% due to its minimal fibre usage and low peak and residual displacement. This study highlights the potential of FRUHPC as a promising material for impact-resistant structures by creating a more favourable flexural failure mechanism, enhancing ductility and toughness under impact loading, and advancing the understanding of the role of fibres in structural performance.

Tailoring Basalt Fibers and E-Glass Fibers as Reinforcements for Increased Impact Resistance

The usage of basalt fiber in the engineering industries has gained significant interest due to its characteristics such as alkali resistance and enhanced mechanical properties. Similarly, E-glass-fiber-reinforced composites have been widely used in the fabrication of electrically resistive industrial components such as switches, circuit panels, and covering cases. In the present study, the tensile, flexural, thermogravimetric, and low-velocity impact characteristics of various percentages of basalt/E-glass-fiber-reinforced polymer composites fabricated via vacuum-assisted resin transfer molding were investigated. The results show that a higher volume percentage of basalt (39%) significantly enhances the impact resistance up to 45% with a moderate improvement in flexural properties. The higher the vol % of E-glass (40%), the more the tensile and flexural properties are increased, i.e., 185 N/mm2 and 227.87 N/mm2, respectively. It is concluded that by choosing the optimum hybridization method, impact resistance and other mechanical properties can be improved significantly. The thermogravimetric analysis results show that PC313534 (35 vol % basalt and 34 vol % E-glass) possesses the lowest decomposition temperature of 381.10 °C. The results from the present study indicate that the polymer composite fabricated in the present study is suitable for applications where higher structural-load-resistive properties are required.

Continuous fiber path optimization in additive manufacturing: A gradient-based B-spline finite element approach

Additive manufacturing of continuous fiber enables the control of local material distribution and mechanical characteristics. This localized control is realized through fiber path generation and optimization, which is one of the core problems in the additive manufacturing of continuous fiber. Current fiber path generation and optimization methods mostly try to infill topology-optimized parts or align the fiber with the maximum stress directions, which may lead to sub-optimality or time-consuming computations. This paper provides a different approach to optimize the fiber path directly by parameterizing it with B-splines and manipulating its control points. A finite element model with B-spline fiber parameterization is established, with an analytical fiber-in-element probability. This framework streamlines the computation of local and global stiffness and mass matrices, enabling effective and efficient prediction of loading responses, stiffness, and natural frequencies. The probability framework also allows efficient calculation of the gradients of the stiffness and mass matrices, leading to a gradient-based fiber path optimization. The effectiveness and accuracy of both the finite element and optimization methods are verified with simulation and experiment case studies. Results demonstrate enhancements in stiffness and strength with less fiber usage compared to a commonly adopted principal stress direction method.

Investigation on the potential of Eulaliopsis binata (babiyo) as a sustainable fiber reinforcement for mortar and concrete

The production of synthetic materials emits harmful gases, driving researchers to seek eco-friendly alternatives, leading to increased demand for natural fiber-based composites in various industries. With advantages like cost-effectiveness, renewability, and biodegradability, natural fiber reinforced composites gain popularity in concrete applications. Their use in concrete has gained global acceptance for its smaller carbon footprint, reduced energy consumption, and minimized wastage. This research aims to evaluate the suitability of Eulaliopsis binata (EB) fiber in mortar and concrete applications. Mortar samples were prepared using different proportions of alkaline-treated EB fibers (0%, 0.25%, 0.5%, 0.75%, 1% and 1.25% by total weight of mortar) in a cement-sand-water mixture with a 1:1:0.35 ratio. Additionally, concrete with a mix proportion of 1:2.15:3.13 (cement: fine aggregate: coarse aggregate) and a water-cement ratio of 0.618 was prepared. The flexural strength test was conducted using plain concrete as well as concrete with untreated and epoxy-treated EB fiber bars of varying diameters. The results revealed that EB fiber-reinforced mortar exhibited a notable increase in flexural and splitting tensile strength, with a 10.85% and 6.23% improvement compared to plain mortar at 0.75% EB fiber content, while compressive strength decreased. Similarly, concrete reinforced with untreated and epoxy-coated EB fiber bars of 14 mm diameter demonstrated 12.32% and 13.27% higher flexural strength, respectively, than that of unreinforced concrete. These results highlight the potential for affordable green concrete production, supporting sustainable infrastructure development. The EB fiber usage presents an encouraging pathway for environmentally conscious construction practices with reduced environmental impact.

Effect of Sugarcane Bagasse, Softwood, and Cellulose on the Mechanical, Thermal, and Morphological Properties of PP/PE Blend

The usage of cellulosic fibers as fillers for thermoplastics has generated great interest due to their numerous advantages and benefits compared to conventional fibers. This article examines a comparative study on the mechanical, thermal, and morphological properties of polypropylene/polyethylene (PP/PE)/cellulose (sugarcane bagasse (SCB) and softwood (SW)) blend composites prepared through melt compounding. The morphology of the obtained PP/PE/SCB and PP/PE/SW blend composites was investigated using scanning electron microscopy (SEM). The X-ray diffraction (XRD) analysis showed reduced crystallinity of the PP/PE blend after fiber interaction. Thermal results showed that the PP/PE/SW blend was more thermally stable compared to the PP/PE/SCB blend. Additionally, the onset temperature of main degradation decreased with th e incorporation of extracted celluloses. Differential scanning calorimetry (DSC) analysis revealed that the introduction of SCB or SW raw fiber and extracted celluloses did not significantly change the melting and crystallization behavior of the PP/PE blend. Dynamic mechanical analysis (DMA) revealed that the storage modulus of the PP/PE/SCB raw and PP/PE/SW raw materials were lower than their corresponding cellulose blend composites across the temperature range studied.

Energy efficient multipath routing in space division multiplexed elastic optical networks

This paper introduces a novel dynamic multipath routing, modulation level, spatial and spectrum assignment algorithm for space division multiplexing (SDM) enabled elastic optical networks (EON) with the aim of minimizing the blocking probability and the energy consumed by bandwidth variable transponders (BVTs). The adopted multipath routing strategy allows the splitting of the demand into several sublightpaths using different fiber cores but ensuring that all of them utilize the same set of fibers in order to avoid differential delay. The method also imposes continuity constraints in both spectrum and core location in order to use cost-effective SDM Reconfigurable Optical Add and Drop Multiplexers (ROADMs) without lane change support. The complete usage of multi-core fibers (MCFs) in this kind of networks is restricted due to inter-core crosstalk (XT), which can reduce the quality of received signals. Therefore, the method besides using the most effective modulation format, also ensures that the XT of the lightpaths (or sublightpaths) does not exceed the threshold for each modulation format. A simulation study comparing our method with another similar proposal from the literature is presented for different types of topologies in terms of link distances. Simulation results demonstrate that the proposed multipath routing algorithm in networks including links close to or beyond 1000 km significantly boost the dynamic performance in terms of blocking probability, energy consumption, and latency.