Uranium Tailings Research Articles

Radon and Gamma Radiation Dose to the Population Residing Near the Uranium Mill Tailings Disposal Site in Uranium Mineralized Zone at Jaduguda

Members of the public residing in the villages situated near the uranium mill disposal site, such as those in the vicinity of uranium tailings ponds, may indeed be at risk of radiation exposure. Present study focuses to evaluate the radiological exposure condition for the resident of villages situated in nearby vicinity of the tailing disposal site in the uranium mineralized region of Jaduguda, Jharkhand, India. In this study, the dose from external gamma radiation and radon concentrations, both indoors and outdoors, is evaluated. The natural background radiation dose to the residents of villages located near the uranium mill tailings disposal site is estimated to be 2.99 mSvy-1. Radon and its decay products contribute approximately 57.6% of the radiation dose to the villagers, while gamma radiation accounts for 42.4%. Residents of villages near the uranium tailings ponds receive a radiation dose is within the typical range of global natural background radiation dose of 1-10 mSvy-1 to the members of the public.

Leaching Peculiarity of Uranium-Containing Layered Double Hydroxide Sediment Varied with Environmental Anions.

In this research, we focus our attention on the leaching peculiarity of uranium-containing Mg-Al layered double hydroxide (LDH) which is one kind of waste sediment in uranium tailings, generated by the alkalinization of uranyl raffinate. The effect of inorganic (CO32-, SO42-, PO43-) and organic (C2O42-, C6H6O72-, C6H16O24P62-) anions were investigated. Atomic force microscopy result showed that the thickness of CO32--LDH increased to 8.6 nm compared to original LDH whose thickness was 6.7 nm. Compared with the control sample (5.58 μm), the grain size with C6H16O24P62- anion grew to 7.04 μm. A large amount of CO32- can stay in LDH, up to 1.78 mol percent, while the C6H16O24P62- anion was only 0.41 mol percent. X-ray diffraction results showed that the anions could change the crystal structure of LDH, especially the C6H18O24P6 anion, and theoretical calculation also conformed this result. The leaching tests showed that the introduction of anions improved the leaching efficiency of UO22+ from LDH. The introduction of anions destroyed the super buffer property of LDH. Theoretical calculation results indicated that the anions could grab UO22+ and help the UO22+ escape from the LDH. This research gave guidance for long-term disposal of uranium-containing tailings.

Characterization of Seismic Dynamic Response of Uranium Tailings Dams Based on Discrete Element Method

Tailings dams play a critical role in ensuring the safety of mining operations. However, earthquakes can cause breaches in these dams, resulting in significant casualties and property damage. This study investigates the dynamic response characteristics of uranium tailings dams subjected to seismic loading, employing the discrete element method. It specifically analyzes how seismic wave amplitude, frequency, and the friction angle of tailings sand affect the dams’ dynamic response. The results reveal that the peak ground acceleration ratio (PGAR) exhibits an increasing–decreasing–increasing pattern with elevation. When the friction angle of the tailings sand exceeds 35°, the overall stability of the dam improves. Conversely, a friction angle below 25° significantly increases the risk of dam failure. Additionally, the dam shows a reduced dynamic response to seismic waves with frequencies exceeding 15 Hz. At lower frequencies, deformation and damage are primarily concentrated on the slope face, while at higher frequencies, damage is predominantly located at the bottom of the model. These findings provide a theoretical foundation and reference for the safe operation of tailings dams, highlighting their practical significance.

Response surface prediction model of radon exhalation rate on beach surface of uranium tailings pond based on single factor law

Response surface prediction model of radon exhalation rate on beach surface of uranium tailings pond based on single factor law

Paper-Based Electrochemical Sensors for Cancer Biomarkers Detection

Cancer is currently the third leading cause of death among the people of the Navajo Nation and is the most common cause of death worldwide. American Indians are often diagnosed when cancer has reached the advanced stages compared to other communities. Major contributors for the cancer inside the Navajo Nation is the exposure to uranium, other heavy metals, and radon gas. In the Navajo Nation, uranium mining boomed from 1944 to 1986; decades later, uranium tailings and toxic waste from the milling process have caused an increased rate of cancer in the Navajo Nation.Further cancer detection and monitoring remain critical challenges in healthcare. This research explores the fabrication of paper-based electrochemical sensors modified with nanoparticles and antigens at the Nanoelectrochemical Analysis and Energy Storage Laboratory (NEST LAB) at Navajo Technical University (NTU) for the sensitive and selective detection of cancer biomarkers.These electrochemical sensors harness the unique qualities of paper, such as low cost and ease of fabrication, combined with the specific binding capabilities of nanoparticles and antigens. Modifying paper electrode surfaces enhances sensitivity and selectivity, making these sensors a cost-effective and portable option for early cancer detection. In contrast to traditional methods like imaging and biopsies, electrochemical sensors are low-cost, offer minimally invasive screening, high sensitivity, and affordability, making them valuable tools in the early diagnosis and management of cancer. These sensors'accessibility and potential to detect cancer at its earliest stages can significantly improve patient outcomes, particularly in resource-limited areas such as Native American reservations.Keywords: Cancer biomarkers, paper-based electrochemical sensors, nanoparticle modification, antigen modification, early detection, point-of-care diagnostics, cost-effective healthcare.

Evaluation of accurate measurement methods for radon exhalation rate with advection effect and application in field

In decommissioning of a uranium tailings pond, radon exhalation rates on a beach surface should meet regulatory standards. Accurate measurements of the radon exhalation rate are demanded. However, current studies fail to consider the impact of advection under temperature variations or pressure gradients caused by gas movement on measurements using an accumulation chamber. Two proposed methods were therefore evaluated to accurately measure radon exhalation rates on the loose medium surface under advective conditions. Repeated experiments were conducted on a laboratory experimental platform filled with uranium tailings sand under advective flow rates of 0.03 and 0.3 L/min to validate the stability and reliability. Deviations between measured and true values were 0.1–6.1 % and 6.3–29.2 % for the two methods, respectively. Subsequently, numerical simulation was used to analyze defects of traditional methods and mechanisms of the new methods. In a field study, all methods were compared, and a predictive map of radon exhalation rates was created using interpolated data from 20 random sites using the new method. Results from the proposed methods, compared with traditional ones, were closer to true values under advective conditions, and accurate assessment of beach surface treatment was expected.

"Clinical Features of the Integumentary System in Persons Living in the Vicinity of Uranium Tailings in Mountain Conditions"

"Clinical Features of the Integumentary System in Persons Living in the Vicinity of Uranium Tailings in Mountain Conditions"

Distribution characteristics and pollution evaluation of heavy metals in surface water of a uranium tailing area based on spatial interpolation

Distribution characteristics and pollution evaluation of heavy metals in surface water of a uranium tailing area based on spatial interpolation

Research on the influence of surface crack development on radon exhalation in uranium tailing ponds under wet and dry cycles

Compacted soil layers effectively prevent the migration of radon gas from uranium tailings impoundments to the nearby environment. However, surface damage caused by wet and dry cycles (WDCs) weakens this phenomenon.In order to study the effect of crack network on radon exhalation under WDCs, a homemade uranium tailing pond model was developed to carry out radon exhalation tests under five WDCs. Based on image processing and morphological methods, the area, length, mean width and fractal dimension of the drying cracks were quantitatively analyzed, and multiple linear regression was used to establish the relationship between the geometric characteristics of the cracks and the radon exhalation rate under multiple WDCs. The results suggested that the radon release rate and crack network of the uranium tailings pond gradually stabilized as the water content decreased, following rapid development in a single WDC process. The radon release rate increased continuously after each cycle, with a cumulative increase of 25.9% over 5 cycles. The radon release rate and average crack width remained consistent in size, and a binary linear regression considering width and fractal dimension could explain the changes in radon release rate after multiple WDCs.

Quantifying heavy metal and radionuclide contamination in fish and water proximal to a uranium tailings facility: A Linshui River basin investigation, China

BackgroundThe objective of this study is to evaluate the concentrations of heavy metals and radionuclides in water and fish samples collected from six designated sampling stations along the Linshui River, in close proximity to a Uranium Tailing Pond situated in China. Additionally, it seeks to estimate the bioaccumulation of heavy metals and conduct risk assessments, both carcinogenic and non-carcinogenic, for consumers. MethodsWater and fish samples (yellowhead catfish and common carp) were systematically collected from six stations along the river from January to June 2023, adhering to ethical standards and standard protocols for assessing water quality. Samples underwent chemical preparation and analysis for heavy metals using Graphite Furnace Atomic Absorption Spectrophotometry and Cold Vapor Atomic Absorption Spectroscopy, and for radionuclides using gamma spectrometry, with all methods validated for accuracy. ResultsThe water samples showed metal and radionuclide concentrations within acceptable limits, except for higher levels of U and Th compared to background values. Heavy metal concentrations were higher in common carp compared to yellowhead catfish, with both species exhibiting a similar trend. While non-carcinogenic health risk, as indicated by target hazard quotients, was low for consumers, the health risk data emphasized the carcinogenic threats posed by U238 and Th234. ConclusionsThe study highlights the importance of implementing comprehensive river restoration measures. Additionally, the bioconcentration factor values indicate minimal accumulation of heavy metals in the muscle tissue of fish.

Release of Radioactive Particles to the Environment.

When environmental impact and risks associated with radioactive contamination of ecosystems are assessed, the source term and deposition must be linked to ecosystem transfer, biological uptake and effects in exposed organisms. Thus, a well-defined source term is the starting point for transport, dose, impact and risk models. After the Chornobyl accident, 3-4 tons of spent nuclear fuel were released and radioactive particles were important ingrediencies of the actual source term. As Chornobyl particles were observed in many European countries, some scientists suggested that radioactive particles were "a peculiarity of the Chornobyl accident." In contrast, research over the years has shown that a major fraction of refractory elements such as uranium (U) and plutonium (Pu) released to the environment has been released as particles following a series of past events such as nuclear weapons tests, non-criticality accidents involving nuclear weapons, military use of depleted uranium ammunition, and nuclear reactor accidents. Radioactive particles and colloids have also been observed in discharges from nuclear installations to rivers or to regional seas and are associated with nuclear waste dumped at sea. Furthermore, radioactive particles have been identified at uranium mining and tailing sites as well as at other NORM sites such as phosphate or oil and gas industrial facilities. Research has also demonstrated that particle characteristics such as elemental composition depend on the emitting source, while characteristics such as size distribution, structure, and oxidation state influencing ecosystem transfer will also depend on the release scenarios. Thus, access to advanced particle characteristic techniques is essential within radioecology. After deposition, localized heterogeneities such as particles will be unevenly distributed in the environment. Thus, inventories can be underestimated, and impact and risk assessments of particle contaminated areas may suffer from unacceptable large uncertainties if radioactive particles are ignored. The present paper will focus on key sources contributing to the release of radioactive particles to the environments, as well as linking particle characteristics to ecosystem behavior and potential biological effects.

Enhanced microbial remediation of uranium tailings through red soil utilization

Seepage of uranium tailings has become a focus of attention in the uranium mining and metallurgy industry, and in-situ microbial remediation is considered an effective way to treat uranium pollution. However, this method has the drawbacks of easy biomass loss and unstable remediation effect. To overcome these issues, spare red soil around the uranium mine was used to enhance the efficiency and stability of bioremediation. Furthermore, the bioremediation mechanism was revealed by employing XRD, FTIR, XPS, and 16S rRNA. The results showed that red soil, as a barrier material, had the adsorption potential of 8.21–148.00 mg U/kg soil, but the adsorption is accompanied by the release of certain acidic and oxidative substances. During the dynamic microbial remediation, red soil was used as a cover material to neutralize acidity, provide a higher reduction potential (<-200 mV), and increase the retention rate of microbial agent (19.06 mL/d) compared to the remediation group without red soil. In the presence of red soil, the anaerobic system could maintain the uranium concentration in the solution below 0.3 mg/L for more than 70 days. Moreover, the generation of new clay minerals driven by microorganisms was more conducive to the stability of uranium tailings. Through alcohol and amino acid metabolism of microorganisms, a reducing environment with reduced valence states of multiple elements (such as S2−, Fe2+, and U4+) was formed. At the same time, the relative abundance of functional microbial communities in uranium tailings improved in presence of red soil and Desulfovirobo, Desulfocapsa, Desulfosporosinus, and other active microbial communities reconstructed the anaerobic environment. The study provides a new two-in-one solution for treatment of uranium tailings and resource utilization of red soil through in-situ microbial remediation.

Leaching behaviour of 226Ra from uranium tailings and adsorption behaviour in geotechnical medias

The leaching process of uranium tailings is a typical water-rock interaction. The release of 226Ra from uranium tailings depends on the nuclides outside the intrinsic properties of uranium tailings on the one hand, and is influenced by the water medium on the other. In this paper, a uranium tailings repository in southern China was used as a research object, and uranium tailings at different depths were collected by drilling samples and mixed to analyze the 226Ra occurrence states. Static dissolution leaching experiments of 226Ra under different pH conditions, solid-liquid ratio conditions, and ionic strength conditions were carried out, and the adsorption and desorption behaviours of 226Ra in five representative stratigraphic media were investigated. The results show that 226Ra has a strong adsorption capacity in representative strata, with adsorption distribution coefficient Kd values ranging from 1.07E+02 to 1.29E+03 (mL/g) and desorption distribution coefficients ranging from 4.97E+02 to 2.71E+03 (mL/g), but the adsorption is reversible. The 226Ra in uranium tailings exists mainly in the residual and water-soluble states, and the release of 226Ra from uranium tailings under different conditions is mainly from the water-soluble and exchangeable state fractions. Low pH conditions, low solid-liquid ratio conditions and high ionic strength conditions are favourable to the release of 226Ra from uranium tailings, so the release of 226Ra from uranium tailings can be reduced by means of adjusting the pH in the tailings and setting up a water barrier. The results of this research have important guiding significance for the management of existing uranium tailings ponds and the control of 226Ra migration in groundwater, which is conducive to guaranteeing the long-term safety, stability and sustainability of uranium mining sites.

Decoration of phosphoric acid groups onto Ti3C2Tx MXene for enhanced uranium removal

The construction of novel MXene-based composites with superb abilities through functionalization is an effective strategy to enhance the potential of this emerging inorganic lamellar material for environmental adsorption applications. The present work systematically investigated the adsorption performance of Ti3C2Tx MXene modified with phosphate functional groups that facilitate the capture of uranyl ions. After introducing phosphate groups via a two-step modification of 3-aminopropyltriethoxysilane (APTES) and phytic acid (PA), the synthesized Ti3C2-APTES-PA is significantly superior to pristine Ti3C2Tx nanosheets in terms of adsorption capacity, adsorption selectivity and reusability for uranium. The maximum uptake capacity of Ti3C2-APTES-PA at pH = 5 reaches 323 mg/g, which is 2.5 times higher than that of unmodified MXene. Furthermore, the large selectivity coefficient (SU/M > 16.2) declares that Ti3C2-APTES-PA preferentially adsorbs uranium among substantial competing ions. Ti3C2-APTES-PA also shows good cycling performance that its adsorption capacity remained 92.3 % after 6 cycles. When it comes to treating simulated uranium tailings pond leachate and radioactive wastewater from mines, high U(VI) removal rates of 88.9 % and 96.8 % can be achieved by our ternary composite at a dosage of 0.05 g/L. The underlying adsorption mechanism was unraveled by spectroscopic analysis to be the formation of coordination complexes of uranyl ions with phosphate groups on PA and hydroxyl groups on Ti3C2Tx substrate, as well as the reduction of a small amount of adsorbed U(VI) to U(IV) by MXene. The overall results imply that Ti3C2-APTES-PA is an effective uranium chelating scavenger for the treatment of environmental radioactive wastewater.

Phosphorus additives driving the bacterial community succession during Bacillus spp. remediation of the uranium tailings

Phosphorus additives driving the bacterial community succession during Bacillus spp. remediation of the uranium tailings

Water-soluble rare earth elements (REEs) recovered from uranium tailings

The global energy transition from fossil fuels to renewable sources poses substantial challenges to increase metal production, including industry-critical rare earth elements (REEs). Environmental and social concerns obfuscate the production of these ‘green’ metals and only ∼1% of REE demand is met from recycling. This work highlights the potential for the ‘economic rehabilitation’ of the Mary Kathleen Mine, a relinquished uranium (U) mine with very high (∼3 wt%) total REE concentrations within the tailings storage facility (TSF). Leaching of the tailings revealed that approximately 5% of the REEs are water-soluble, suggesting the possibility for in situ extraction. Using an in situ water leach, the projected total REE recovery is >10,000 t, which would exceed the total amount of U recovered (7,532 t) during the initial mining operation. The proposed in situ recovery would offer a truck-free mine, using solar energy and water recycling technologies to recover REEs from a waste source, reducing environmental contamination.

Experimental Model to Study Characteristics of Radon Cover in Waste Landfills

Waste from resource extraction industries contains uranium and thorium decay chain radionuclides. One important radiological impact of these wastes is the release of radon into the atmosphere. Therefore, the prediction/evaluation of radon flux and the effectiveness of different covers are the major elements in radiation protection, long-term safety aspects, and the modeling of radon release into the environment for a final assessment of radiological impacts and required remediation actions. A measurement system has been designed based on the transient-diffusion method to evaluate radon exhalation by the short-time accumulation technique. The validity of the laboratory model to quickly estimate the radon release from soils, the diffusion coefficient, and the effect of covers was investigated. From the results obtained from the experimental model, it was observed that after a 0.5-m(1-m) cover layer, the radon flux reduction factor increases from 1.3(2.1) for sand to about 2(3) for clay. The results show that the effectiveness of the cover layer studied is 3, which is similar to theoretical and experimental results in uranium tailings ponds.

Advanced “turn-on” colorimetric uranium platform based on the enhanced nanozyme activity of a donor-acceptor structured covalent organic framework

BackgroundThe increasing uranium containing wastes generated during uranium mining and finishing pose a huge threat to the environment and human health, and thus robust strategies for on-site monitoring of uranium pollutant are of great significance for environmental protection around uranium tailings. ResultsHerein, a facile “turn-on” colorimetric platform that can achieve uranium detection by spectrometry and naked eyes was developed based on the uranium-enhanced nanozyme activity of covalent organic framework (JUC-505). Thanks to the extended π-conjugated skeleton and donor-acceptor (D-A) structure, JUC-505 exhibited superior photo-activated nanozyme activity, which would be prohibited when the cyano group in JUC-505 skeleton was transformed to the amidoxime group. Further results elucidated that the coordination of uranium with amidoxime groups led to the electron transfer between uranium and the JUC-505-AO skeleton, and thus significantly restored the nanozymatic activity of JUC-505-AO with the subsequent remarkable color changes. Moreover, the uranium concentrations in uranium tailing wastewater detected by the present “turn-on” colorimetric method were well agreed with those by ICP-MS, demonstrating a high accuracy of the present method in real samples. SignificanceThe D-A structured JUC-505 with superior photocatalytic property and nanozymatic activity was applied to facilitate colorimetric detection of uranium, which displays the advantages of low detection limit, excellent selectivity, fast response and simple operation for uranium detection in real samples, and shows a great potential in on-site monitoring of uranium pollutant around uranium tailings as well as nuclear power plant.

Isolation and identification of a high-efficiency hexavalent uranium adsorption strain and preliminary study of the influencing factors and adsorption mechanism.

In this study, a bacterial strain Chryseobacterium bernardetii WK-3 was isolated from the rhizosphere soil of a uranium tailings in Southern China. It can efficiently adsorb hexavalent uranium with an adsorption ratio of 92.3%. The influence of different environmental conditions on the adsorption ratio of Chryseobacterium bernardetii strain WK-3 was investigated, and the adsorption mechanism was preliminarily discussed by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). The results showed that the optimal adsorption conditions for U(VI) by Chryseobacterium bernardetii strain WK-3 were pH = 5, temperature 30 ℃, NaCl concentration 1%, and inoculation volume 10%. When the initial concentration of U was 50 ~ 150mg/L, the adsorption capacity of Chryseobacterium bernardetii strain WK-3 to U(VI) reached the maximum and maintained the equilibrium at 44h. SEM-EDS results showed that phosphorus in cells participates in the interaction of uranyl ions, which may indicate that phosphate was produced during cell metabolism and was further combined to form U(VI)-phosphate minerals. In summary, Chryseobacterium bernardetii strain WK-3 would be a promising alternative for environmental uranium contamination remediation.

Study on the effect of crack characteristics on radon exhalation from overburden of uranium tailings pond

Study on the effect of crack characteristics on radon exhalation from overburden of uranium tailings pond