Uracil-specific Excision Reagent Research Articles

Improved USER cloning for TALE assembly and its application to base editing.

Transcription activator-like effectors (TALEs) have been widely used for genome editing, transcriptional regulation, and locus-specific DNA imaging. However, TALEs are difficult to handle in routine laboratories because of their complexity and the considerable time consumed in TALE construction. Here, we described a simple and rapid TALE assembly method based on uracil-specific excision reagent (USER) cloning. Polymerase chain reaction was amplified with TALE trimer templates and deoxyuridine-containing primers. The products were treated with USER at 37°C for 30 min, followed by the treatment of T4 DNA Ligase at 16°C for 30 min. The TALE trimer unit could be rejoined hierarchically to form complete TALE expression vectors with high efficiency. This method was adopted to construct TALE-deaminases, which were used in combination with Cas9 nickases to generate efficient C-to-T or A-to-G base editing while eliminating predictable DNA off-target effects. This improved USER assembly is a simple, rapid, and laboratory-friendly TALE construction technique that will be valuable for DNA targeting.

Regio- and Stereoselective Steroid Hydroxylation at C7 by Cytochrome P450 Monooxygenase Mutants.

Steroidal C7β alcohols and their respective esters have shown significant promise as neuroprotective and anti‐inflammatory agents to treat chronic neuronal damage like stroke, brain trauma, and cerebral ischemia. Since C7 is spatially far away from any functional groups that could direct C−H activation, these transformations are not readily accessible using modern synthetic organic techniques. Reported here are P450‐BM3 mutants that catalyze the oxidative hydroxylation of six different steroids with pronounced C7 regioselectivities and β stereoselectivities, as well as high activities. These challenging transformations were achieved by a focused mutagenesis strategy and application of a novel technology for protein library construction based on DNA assembly and USER (Uracil‐Specific Excision Reagent) cloning. Upscaling reactions enabled the purification of the respective steroidal alcohols in moderate to excellent yields. The high‐resolution X‐ray structure and molecular dynamics simulations of the best mutant unveil the origin of regio‐ and stereoselectivity.

Regio‐ and Stereoselective Steroid Hydroxylation at C7 by Cytochrome P450 Monooxygenase Mutants

AbstractSteroidal C7β alcohols and their respective esters have shown significant promise as neuroprotective and anti‐inflammatory agents to treat chronic neuronal damage like stroke, brain trauma, and cerebral ischemia. Since C7 is spatially far away from any functional groups that could direct C−H activation, these transformations are not readily accessible using modern synthetic organic techniques. Reported here are P450‐BM3 mutants that catalyze the oxidative hydroxylation of six different steroids with pronounced C7 regioselectivities and β stereoselectivities, as well as high activities. These challenging transformations were achieved by a focused mutagenesis strategy and application of a novel technology for protein library construction based on DNA assembly and USER (Uracil‐Specific Excision Reagent) cloning. Upscaling reactions enabled the purification of the respective steroidal alcohols in moderate to excellent yields. The high‐resolution X‐ray structure and molecular dynamics simulations of the best mutant unveil the origin of regio‐ and stereoselectivity.

Assay of DNA methyltransferase 1 activity based on uracil-specific excision reagent digestion induced G-quadruplex formation

DNA methylation catalyzed by DNA methyltransferase plays an important role in many biological processes including gene transcription, genomic imprinting and cellular differentiation. Herein, a novel and effective electrochemical method for the assay of DNA methyltransferase 1(DNMT1) activity has been successfully developed by using uracil-specific excision reagent (USER) induced G-quadruplex formation. Briefly, double stranded DNA containing the recognition sequence of DNMT1 is immobilized on the electrode. Among them, one strand (DNA S1) contains G-rich sequence and a cytosine base, while the supplement strand (DNA S2) cotains C-rich sequence and a methylated cytosine. Through the activity of DNMT1, the hemimethylated CG recognition sequence of the double stranded DNA are methylated and DNA S2 strand is cleaved and removed after the subsequently treatment with EpiTect fast bisulfite conversion kits and USER, leaving the DNA S1 to form the G-quadruplex-hemin DNAzyme for signal amplification. Under optimal-conditions, the method shows wide linear range of 0.1–40 U mL−1 with a detection limit of 0.06 U mL−1. Furthermore, the inhibition assay study demonstrates that SGI-1027 can inhibit the DNMT 1 activity with the IC50 values of 6 μM in the presence of 160 μM S-adenosylmethionine. Since this method can detect human DNMT1 activity effectively and has successfully been applied in complex biological samples, it may have great potential in the applications in DNA methylation related clinical practices and biochemical researches.

Development of an Agrobacterium-mediated transformation system for the cold-adapted fungi Pseudogymnoascus destructans and P. pannorum

The mechanisms of cold adaptation by fungi remain unknown. This topic is of high interest due to the emergence of white-nose syndrome (WNS), a skin infection of hibernating bats caused by Pseudogymnoascus destructans (Pd). Recent studies indicated that apart from Pd, there is an abundance of other Pseudogymnoascus species in the hibernacula soil. We developed an Agrobacterium tumefaciens-mediated transformation (ATMT) system for Pd and a related fungus Pseudogymnoascus pannorum (Pp) to advance experimental studies. URE1 gene encoding the enzyme urease was used as an easy to screen marker to facilitate molecular genetic analyses. A Uracil-Specific Excision Reagent (USER) Friendly pRF-HU2 vector containing Pd or Pp ure1::hygromycin (HYG) disruption cassette was introduced into A. tumefaciens AGL-1 cells by electroporation and the resulting strains were co-cultivated with conidia of Pd or Pp for various durations and temperatures to optimize the ATMT system. Overall, 680 Pd (0.006%) and 1800 Pp (0.018%) transformants were obtained from plating of 107 conidia; their recoveries were strongly correlated with the length of the incubation period (96h for Pd; 72h for Pp) and with temperature (15–18°C for Pd; 25°C for Pp). The homologous recombination in transformants was 3.1% for Pd and 16.7% for Pp. The availability of a standardized ATMT system would allow future molecular genetic analyses of Pd and related cold-adapted fungi.

Genetic transformation of Fusarium avenaceum by Agrobacterium tumefaciens mediated transformation and the development of a USER-Brick vector construction system.

BackgroundThe plant pathogenic and saprophytic fungus Fusarium avenaceum causes considerable in-field and post-field losses worldwide due to its infections of a wide range of different crops. Despite its significant impact on the profitability of agriculture production and a desire to characterize the infection process at the molecular biological level, no genetic transformation protocol has yet been established for F. avenaceum. In the current study, it is shown that F. avenaceum can be efficiently transformed by Agrobacterium tumefaciens mediated transformation. In addition, an efficient and versatile single step vector construction strategy relying on Uracil Specific Excision Reagent (USER) Fusion cloning, is developed.ResultsThe new vector construction system, termed USER-Brick, is based on a limited number of PCR amplified vector fragments (core USER-Bricks) which are combined with PCR generated fragments from the gene of interest. The system was found to have an assembly efficiency of 97% with up to six DNA fragments, based on the construction of 55 vectors targeting different polyketide synthase (PKS) and PKS associated transcription factor encoding genes in F. avenaceum. Subsequently, the ΔFaPKS3 vector was used for optimizing A. tumefaciens mediated transformation (ATMT) of F. avenaceum with respect to six variables. Acetosyringone concentration, co-culturing time, co-culturing temperature and fungal inoculum were found to significantly impact the transformation frequency. Following optimization, an average of 140 transformants per 106 macroconidia was obtained in experiments aimed at introducing targeted genome modifications. Targeted deletion of FaPKS6 (FA08709.2) in F. avenaceum showed that this gene is essential for biosynthesis of the polyketide/nonribosomal compound fusaristatin A.ConclusionThe new USER-Brick system is highly versatile by allowing for the reuse of a common set of building blocks to accommodate seven different types of genome modifications. New USER-Bricks with additional functionality can easily be added to the system by future users. The optimized protocol for ATMT of F. avenaceum represents the first reported targeted genome modification by double homologous recombination of this plant pathogen and will allow for future characterization of this fungus. Functional linkage of FaPKS6 to the production of the mycotoxin fusaristatin A serves as a first testimony to this.

Rapid and Efficient Assembly of Transcription Activator-Like Effector Genes by USER Cloning

Transcription activator-like effectors (TALEs) that were related to bacteria immune system have lately been employed in a promising approach of precise gene targeting. Because of the repetitive characteristics of TALEs, existing TALE assembly methods are either very complicated, time-consuming, or too tricky to be handled in common labs. Here, we reported a rapid, efficient and easy method for TALE assembly. This method takes advantage of uracil-specific excision reagent (USER), an enzyme that can cleave DNA constructs and create long, unique single-strand DNA overhangs. Upon USER treatment, the overhangs on each individual TALE repeat unit can be rejoined hierarchically to form pentamers in a ligation-independent manner. Eventually, three pentamers are assembled into a full TALE construct by Golden Gate cloning. TALE nucleases (TALENs) generated with this method exhibit high genome-editing activity in human cells such as HEK293FT cells. Using this method, we have successfully synthesized three TALEN pairs targeting endogenous Tet1 locus, and proved that all can specifically target Tet1 gene, though in various degree. Comparing to other methods of TALEN assembly, this one is much less labor intensive and fairly faster, and positive clones can be obtained at high efficiency within only two days. We thus contribute to an easier approach for effective TALENs synthesis, which may highly facilitate the wide application of TALEN technology in genome editing, especially for human cells that require precise targeting.

Engineering of photosynthetic mannitol biosynthesis from CO2 in a cyanobacterium

d-Mannitol (hereafter denoted mannitol) is used in the medical and food industry and is currently produced commercially by chemical hydrogenation of fructose or by extraction from seaweed. Here, the marine cyanobacterium Synechococcus sp. PCC 7002 was genetically modified to photosynthetically produce mannitol from CO2 as the sole carbon source. Two codon-optimized genes, mannitol-1-phosphate dehydrogenase (mtlD) from Escherichia coli and mannitol-1-phosphatase (mlp) from the protozoan chicken parasite Eimeria tenella, in combination encoding a biosynthetic pathway from fructose-6-phosphate to mannitol, were expressed in the cyanobacterium resulting in accumulation of mannitol in the cells and in the culture medium. The mannitol biosynthetic genes were expressed from a single synthetic operon inserted into the cyanobacterial chromosome by homologous recombination. The mannitol biosynthesis operon was constructed using a novel uracil-specific excision reagent (USER)-based polycistronic expression system characterized by ligase-independent, directional cloning of the protein-encoding genes such that the insertion site was regenerated after each cloning step. Genetic inactivation of glycogen biosynthesis increased the yield of mannitol presumably by redirecting the metabolic flux to mannitol under conditions where glycogen normally accumulates. A total mannitol yield equivalent to 10% of cell dry weight was obtained in cell cultures synthesizing glycogen while the yield increased to 32% of cell dry weight in cell cultures deficient in glycogen synthesis; in both cases about 75% of the mannitol was released from the cells into the culture medium by an unknown mechanism. The highest productivity was obtained in a glycogen synthase deficient culture that after 12 days showed a mannitol concentration of 1.1gmannitolL−1 and a production rate of 0.15gmannitolL−1day−1. This system may be useful for biosynthesis of valuable sugars and sugar derivatives from CO2 in cyanobacteria.

ULtiMATE System for Rapid Assembly of Customized TAL Effectors

Engineered TAL-effector nucleases (TALENs) and TALE-based constructs have become powerful tools for eukaryotic genome editing. Although many methods have been reported, it remains a challenge for the assembly of designer-based TALE repeats in a fast, precise and cost-effective manner. We present an ULtiMATE (USER-based Ligation Mediated Assembly of TAL Effector) system for speedy and accurate assembly of customized TALE constructs. This method takes advantage of uracil-specific excision reagent (USER) to create multiple distinct sticky ends between any neighboring DNA fragments for specific ligation. With pre-assembled templates, multiple TALE DNA-binding domains could be efficiently assembled in order within hours with minimal manual operation. This system has been demonstrated to produce both functional TALENs for effective gene knockout and TALE-mediated gene-specific transcription activation (TALE-TA). The feature of both ease-of-operation and high efficiency of ULtiMATE system makes it not only an ideal method for biologic labs, but also an approach well suited for large-scale assembly of TALENs and any other TALE-based constructions.

DNA Fragments Assembly Based on Nicking Enzyme System

A couple of DNA ligation-independent cloning (LIC) methods have been reported to meet various requirements in metabolic engineering and synthetic biology. The principle of LIC is the assembly of multiple overlapping DNA fragments by single-stranded (ss) DNA overlaps annealing. Here we present a method to generate single-stranded DNA overlaps based on Nicking Endonucleases (NEases) for LIC, the method was termed NE-LIC. Factors related to cloning efficiency were optimized in this study. This NE-LIC allows generating 3′-end or 5′-end ss DNA overlaps of various lengths for fragments assembly. We demonstrated that the 10 bp/15 bp overlaps had the highest DNA fragments assembling efficiency, while 5 bp/10 bp overlaps showed the highest efficiency when T4 DNA ligase was added. Its advantage over Sequence and Ligation Independent Cloning (SLIC) and Uracil-Specific Excision Reagent (USER) was obvious. The mechanism can be applied to many other LIC strategies. Finally, the NEases based LIC (NE-LIC) was successfully applied to assemble a pathway of six gene fragments responsible for synthesizing microbial poly-3-hydroxybutyrate (PHB).

One-step plasmid construction for generation of knock-out mutants in cyanobacteria: studies of glycogen metabolism in Synechococcus sp. PCC 7002

Genome sequences of microorganisms typically contain hundreds of genes with vaguely defined functions. Targeted gene inactivation and phenotypic characterization of the resulting mutant strains is a powerful strategy to investigate the function of these genes. We have adapted the recently reported uracil-specific excision reagent (USER) cloning method for targeted gene inactivation in cyanobacteria and used it to inactivate genes in glycogen metabolism in Synechococcus sp. PCC 7002. Knock-out plasmid constructs were made in a single cloning step, where transformation of E. coli yielded about 90% colonies with the correct construct. The two homologous regions were chosen independently of each other and of restriction sites in the target genome. Mutagenesis of Synechococcus sp. PCC 7002 was tested with four antibiotic resistance selection markers (spectinomycin, erythromycin, kanamycin, and gentamicin), and both single-locus and double-loci mutants were prepared. We found that Synechococcus sp. PCC 7002 contains two glycogen phosphorylases (A0481/glgP and A2139/agpA) and that both need to be genetically inactivated to eliminate glycogen phosphorylase activity in the cells.

UCE: A uracil excision (USER™)-based toolbox for transformation of cereals

BackgroundCloning of gene casettes and other DNA sequences into the conventional vectors for biolistic or Agrobacterium-mediated transformation is hampered by a limited amount of unique restriction sites and by the difficulties often encountered when ligating small single strand DNA overhangs. These problems are obviated by "The Uracil Specific Excision Reagent (USER™)" technology (New England Biolabs) which thus offers a new and very time-efficient method for engineering of big and complex plasmids.ResultsBy application of the USER™ system, we engineered a collection of binary vectors, termed UCE (USER cereal), ready for use in cloning of complex constructs into the T-DNA. A series of the vectors were tested and shown to perform successfully in Agrobacterium-mediated transformation of barley (Hordeum vulgare L.) as well as in biolistic transformation of endosperm cells conferring transient expression.ConclusionsThe USER™ technology is very well suited for generating a toolbox of vectors for transformation and it opens an opportunity to engineer complex vectors, where several genetic elements of different origin are combined in a single cloning reaction.