Untreated Polyester Fabric Research Articles

Partial Characterisation and Colorimetric Characteristics of<i> Sargassum</i> sp. Colorant on Treated Polyester Fabric with Dendrimer

This study focuses on the characterization of pigment compounds presence in Sargassum sp. extracts. The ground powder of dry Sargassum sp. was macerated in in methanol solution at 60°C for 48 hours in an aluminium foil-wrapped conical flask (to provide the dark environment). The extracted colourant was measured with UV-vis Spectrophotometer and Q-TOF LCMS to determine the compounds presence. The extracted colourant also used to dye pretreated and untreated polyester fabric with poly(amidoamine) dendrimer at different concentrations with and without mordants. The exhaustion dyeing with the simultaneous mordanting procedure was carried at 85°C for 60 minutes. The colorimetric properties of the dyed fabrics were then analysed. The results showed that the pigment compounds presence in Sargassum sp. extracts is fucoxanthin and chlorophyll. The application of dendrimer improved K/S values of the dyed fabric. Thus, Sargassum sp. extract is suitable to be used as natural dyes for textile dyeing.

Axillary odour studies on alkali-treated knitted polyester fabric

PurposeOdour formation in textile material is mainly based on the fibre content and also the constituent fibres’ chemical and physical structures. Polyester fibre materials are very profound to form odour after being worn due to their highly oleophilic nature. The purpose of this paper is to analyse the odour formation characteristics of polyester fabric after surface modification through alkali treatment.Design/methodology/approachFive male participants were allowed to use the alkali-treated and untreated polyester fabrics, which were fixed in the axilla region of their vest. Subjective and objective odour analyses were performed for the worn samples. The odour was evaluated in terms of intensity rating, bacterial population (CFU/ml) and bacterial isolation.FindingsThe results showed that alkali treatment was effective in odour reduction in polyester fabric (p<0.005). The bacterial population density was also reduced significantly (p<0.005) in the alkali-treated polyester fabric compared to the untreated polyester fabric after the wear trial. The alkali treatment affected the surface structure of the polyester fabric and thus changed it from hydrophilic to hydrophobic. This was confirmed by the moisture management test results.Originality/valueThe odour formation in the polyester fabric can be controlled by simple surface modification process like alkali treatment, and thus the value of the product can be increased in the apparel sector.

Crosslinking of Sericin on air atmospheric plasma treated polyester fabric

Durable and highly hydrophilic polyester fabric was produced by cross-linking Sericin on air-atmospheric plasma treated polyester fabric. Surface change properties were characterized by wettability measurements (water contact angle-WCA and % capillarity), Atomic Force Microscopy and zeta potential measurements. Chemical analyses using TBO dye were carried out to estimate surface functional groups after plasma treatment and Sericin cross-linking. Positive zeta potential values at low pH values, as well as AFM images confirm grafting of Sericin. With Sericin cross-linked onto both cleaned PET and plasma-treated PET, WCA reached that of PET subjected to plasma treatment alone, that is WCA between 40° and 46° compared to 81° for the hydrophobic untreated polyester fabric. However, plasma-treated polyester is readily subjected to aging, while cross-linked Sericin on plasma-treated PET yields a more durable hydrophilic finish with a high capillarity, 85% compared to 39% for Sericin on the untreated PET, and 3% for the untreated PET fabric. Plasma treatment creates chain-scissions at the polymer surface leading to the appearance of polar groups which promote the cross-linking of greater amount of Sericin.

A Durable Superhydrophilic Modification of Polyester Fabric

In this paper, a durable superhydrophilic modification was applied to polyester fabric to improve its wettability- HAS treatment. The wetting ability of HAS treated polyester fabric improved a lot; the water contact angle could decrease to 00 in 3s; the water content increased up to 115%; the wicking distance increased up to 15cm; spraying rate improved to 1 degree. The wearability tests showed the breaking strength and creasability remain almost the same as untreated polyester fabric.

Pull-out properties of polyester woven fabrics: Effects of softening agent and interlacement on single and multiple yarn pull-out forces and analysis by statistical model

The aim of this study was to understand the effects of softening treatment on pull-out properties of plain, ribs and satin fabrics. Polyester woven fabrics were used to conduct the pull-out tests. Data generated from these tests included pullout force, crimp extension and fabric displacement. A developed yarn pull-out fixture was used to perform single and multiple pull-out tests on treated and untreated polyester fabrics. Yarn pull-out forces depend on fabric treatments, fabric density, fabric weave, and the number of pulled ends in the fabric. The results of regression model showed that multiple and single yarn pull-out forces of treated fabrics were lower than those of untreated fabrics. The multiple yarn pull-out force was higher than that of the single yarn pull-out force, and that dense fabric had a high pull-out force. Treated and untreated plain fabrics had high single and multiple pull-out forces compared to those of treated and untreated ribs and satin fabrics. Yarn crimp extension depends on directional crimp ratios in the fabric and the number of pulled yarn ends. High directional crimp ratio fabric showed high directional yarn crimp extension. Fabric displacement depends on the number of pulled yarn ends and also fabric treatments. Fabric displacement in multiple pull-out tests showed high fabric displacement compared to that of single pull-out tests. On the other hand, the regression model could be used in this study as a viable and reliable tool.

Optimization of papain treatment for improving the hydrophilicity of polyester fabrics

The goal of this study was to establish optimal conditions for improving the hydrophilicity of polyester fabrics. The hydrolytic activity of papain was determined by measuring the number of carboxylic groups in the treatment solution. Papain treatment conditions-such as pH, temperature, treatment time, and enzyme concentration-were optimized by measuring hydrolytic activity, moisture regain, and wettability. Optimal papain treatment conditions were identified as a pH of 7.5, temperature of 30 °C, treatment time of 60 min, and papain concentration of 100 %(o.w.f.). The moisture regain for polyester fabrics treated with papain improved to 1.28±0.02 %, a 2.7-fold increase compared to that of untreated polyester fabrics. As the hydrolytic activity increased, the moisture regain and wettability of the treated fabrics improved. L-cysteine and sodium sulfite did not affect the moisture regain of papain-treated polyester fabrics.

Effect of UV Curable Pretreatments on the Color Quality of Inkjet Printed Polyester Fabrics

Woven and knitted polyester fabrics were pretreated with formulations containing waterborne UV curable resins and silica particles to improve inkjet print quality. The selected formulations were applied with low add-on to reduce the adverse effect on fabric hand without sacrificing the print quality. A print pattern with block areas and lines in cyan, magenta, yellow, and black colors was designed and inkjet printed on the pretreated fabrics with a wide-format inkjet printer (Encad Novajet 750) to investigate the effects of the UV curable pretreatment on the inkjet print color qualities including color depth, color gamut and color lightness. Experimental results show that both the color depth and gamut of prints on the pretreated taffeta and knitted polyester fabrics were enhanced compared to those on untreated polyester fabrics. However, both the color depth and gamut of the prints on the pretreated satin polyester fabrics were reduced. The lightness change of the inkjet printed colors on pretreated knitted fabrics is similar to that of untreated fabrics whereas the lightness change of prints on pretreated satin and taffeta fabrics shows some differences. All colors have increased lightness on pretreated satin fabrics. However, magenta and black have decreased lightness on the pretreated taffeta fabrics.

Cationization and gamma irradiation effects on the dyeability of polyester fabric towards disperse dyes

The effect of hydrazine hydrate (HZH) treatment and/or gamma irradiation on the dyeing, mechanical and thermal properties of polyester fabrics (PET) was studied. The different factors that may affect the dyeing performance, such as concentrations of HZH, benzyl alcohol and pH values, were investigated. In this regard, the colour strength of untreated polyester fabrics dyed with the dyestuffs Dispersol blue BR, Dispersol orange B2R and Dispersol red B2B was found to be 10.34, 10.76 and 10.12 compared to 24.61, 24.90 and 23.00 in the case of irradiated and HZH-treated polyester fabrics, respectively. These colour strength values were achieved by preirradiation at a dose of 75kGy followed by treatment with 15mll-1 of HZH. Thermogravimetric analysis (TGA) showed that the thermal decomposition stability was improved by using gamma irradiation and the treatment with HZH as indicated by the calculated activation energies. FT-IR spectroscopy showed that the treatment with HZH acts as cationizer prior to dyeing with disperse dyes.

Effect of bonding systems on the adhesion of butyl rubber to polyester fabric

An adhesion promoter system composed of hexamethylene tetramine, resorcinol, and hydrated silica was compounded with butyl rubber mix. This mix was spread over untreated polyester fabric. The resorcinol was also replaced by o-aminophenol, m-aminophenol, or m-phenylene diamine. The rubber-fabric materials were subjected to aging or exposed to ionizing radiation. The peel strength, permeability, dielectric constant, and electrical resistivity were examined.

The dyeing and colour characteristics of alkali–treated polyester fibres dyed with disperse dyes

Alkali–treated and untreated polyester fabrics were dyed for up to 6 h at 100°C with a series of six disperse dyes of different chemical structures. The alkali–treated polyester samples adsorbed more dye and were dyed to deeper depths of shade and slightly different shades than was the untreated polyester. The greatest differences were observed for the alkali–treated polyester with the most outer surface or skin removed. Dye structure and molecular size also affected the amount of dye adsorbed on the fibres, but did not delineate the nature of differences between skin and core morphology. This study shows that significant differences exist between the molecular structure of the skin and core of melt–spun polyester fibres.