Unsymmetrical N-heterocyclic Carbene Research Articles

Wingtip-Flexible N-Heterocyclic Carbenes: Unsymmetrical Connection between IMes and IPr.

IMes (IMes=1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene) and IPr (IPr=1,3- bis(2,6-diisopropylphenyl)imidazol-2-ylidene) represent by far the most frequently used N-heterocyclic carbene ligands in homogeneous catalysis, however, despite numerous advantages, these ligands are limited by the lack of steric flexibility of catalytic pockets. We report a new class of unique unsymmetrical N-heterocyclic carbene ligands that are characterized by freely-rotatable N-aromatic wingtips in the imidazol-2-ylidene architecture. The combination of rotatable N-CH2 Ar bond with conformationally-fixed N-Ar linkage results in a highly modular ligand topology, entering the range of geometries inaccessible to IMes and IPr. These ligands are highly reactive in Cu(I)-catalyzed β-hydroboration, an archetypal borylcupration process that has had a transformative impact on the synthesis of boron-containing compounds. The most reactive Cu(I)-NHC in this class has been commercialized in collaboration with MilliporeSigma to enable broad access of the synthetic chemistry community. The ligands gradually cover %Vbur geometries ranging from 37.3 % to 52.7 %, with the latter representing the largest %Vbur described for an IPr analogue, while retaining full flexibility of N-wingtip. Considering the modular access to novel geometrical space in N-heterocyclic carbene catalysis, we anticipate that this concept will enable new opportunities in organic synthesis, drug discovery and stabilization of reactive metal centers.

Vanadium(V) Complexes Containing Unsymmetrical N-Heterocyclic Carbene Ligands: Highly Efficient Synthesis and Catalytic Behavior towards Ethylene/Propylene Copolymerization

Vanadium(V) Complexes Containing Unsymmetrical N-Heterocyclic Carbene Ligands: Highly Efficient Synthesis and Catalytic Behavior towards Ethylene/Propylene Copolymerization

Synthesis of Phenol-Tagged Ruthenium Alkylidene Olefin Metathesis Catalysts for Robust Immobilisation Inside Metal–Organic Framework Support

Two new unsymmetrical N-heterocyclic carbene ligand (uNHC)-based ruthenium complexes featuring phenolic OH function were obtained and fully characterised. The more active one was then immobilised on the metal–organic framework (MOF) solid support (Al)MIL-101-NH2. The catalytic activity of such a heterogeneous system was tested, showing that, while the heterogeneous catalyst is less active than the corresponding homogeneous catalyst in solution, it can catalyse selected olefin metathesis reactions, serving as the proof-of-concept for the immobilisation of catalytically active complexes in MOFs using a phenolic tag.

Alternating Ring-Opening Metathesis Polymerization Promoted by Ruthenium Catalysts Bearing Unsymmetrical NHC Ligands

In this paper, Grubbs- and Hoveyda–Grubbs-type olefin metathesis catalysts featuring N-cyclopentyl/N’-mesityl backbone-substituted N-heterocyclic carbene (NHC) ligands were synthesized. Their propensity to promote the alternating ring-opening metathesis copolymerization (ROMP) of norbornene (NBE) with cyclooctene (COE) or cyclopentene (CPE) was evaluated and compared to that shown by analogous N-cyclohexyl complexes. High degrees of chemoselectivity were achieved in both copolymerizations. The presence of the N-cyclopentyl substituent allowed for the achievement of up to 98% and 97% of alternating diads for NBE-COE and NBE-CPE copolymers, respectively, at low comonomer ratios. Density functional theory (DFT) studies showed that both the sterical and electronic effects of NHC ligands influence catalyst selectivity.

Unexpected Latency of Z-Stereoretentive Ruthenium Olefin Metathesis Catalysts Bearing Unsymmetrical N-heterocyclic Carbene or Cyclic(alkyl)(amino)carbene Ligands.

A set of ruthenium complexes bearing a CAAC or uNHC ligand and a dithiocatechol fragment have been obtained and characterized spectroscopically. The activity and Z-selectivity of the newly obtained catalysts were studied in selected model CM, self-CM, and RCM olefin metathesis reactions. Intriguingly, and in contrast to structurally related NHC-bearing catalysts Ru4a and Ru4b, the CAAC and uNHC analogues showed no or only very little activity in olefin metathesis. Interestingly, despite being not productive in metathesis reactions conducted in solution, Ru8 enabled the synthesis of a model 16-membered macrocyclic lactone of valuable musk smell with excellent chemoselectivity (no C-C double-bond migration was observed) at a concentration 40 times higher than that typically used by organic chemists in similar macrocyclizations (200 mM instead of 5 mM) with excellent Z-selectivity. Unfortunately, also here the conversion was low.

Ruthenium indenylidene complexes bearing bis(N-Alkyl/N’-Mesityl)-sided heterocyclic carbene ligands

We report on the synthesis and characterization of new ruthenium indenylidene complexes bearing two unsymmetrical N-heterocyclic carbene (NHC) ligands denoted as RuCl2(3-phenyl-1-indenylidene)bis(1-mesityl-3-R-4,5-dihydroimidazole-2-ylidene) in which R is methyl 7a and cyclohexyl 7b. Complexes 7a and 7b were analyzed using single-crystal X-ray diffraction analysis, elemental analysis, IR, NMR spectroscopy, and HRMS. The catalytic activities of complexes 7a and 7b were evaluated in olefin metathesis reactions: ring-opening metathesis polymerization (ROMP) of cis,cis-1,5-cyclooctadiene (COD) and ringclosing metathesis (RCM) of diethyl diallyl malonate (DEDAM) as well as in the isomerization of allylic alcohols. Complexes 7a and 7b failed to initiate the reactions at room temperature in all tested reactions, which might be due to the high thermal stability and low degree of lability of the Ru-CNHC bonds. At 80 °C, the complex 7a showed the best performance due to an increased initiation and a decreased steric obstruction towards the incoming substrates.

Ruthenium olefin metathesis catalysts bearing two bulky and unsymmetrical NHC ligands

The activity profile of the new indenylidene complexes containing two unsymmetrical N‐heterocyclic carbene (NHC) ligands was investigated. They turned out to be effective in both straightforward olefin metathesis reactions, such as ring‐closing metathesis (RCM) of diethyl diallylmalonate, as well as in more demanding processes, such as RCM of 2,2‐di‐(2‐methylallyl)tosylate leading to a product bearing a tetrasubstituted double bond, and in selective ethenolysis of methyl and ethyl oleate.

Titanium complexes with unsymmetrically substituted imidazolin-2-iminato ligands.

The reaction of the unsymmetrical N-heterocyclic carbenes 1-(2,4,6-trimethylphenyl)-3-(adamantyl)imidazolin-2-ylidene (IAdMes, 1a) and 1-(2,6-diisopropylphenyl)-3-(adamantyl)imidazolin-2-ylidene (IAdDipp, 1b) with trimethylsilyl azide furnished the 2-(trimethylsilylimino)imidazolines 2a (ImAdMesNSiMe3) and 2b (ImAdDippNSiMe3). Desilylation by stirring in methanol gave the corresponding imidazolin-2-imines 3a (ImAdMesNH) and 3b (ImAdDippNH). 2a and 2b were treated with [TiCl4(THF)2] (THF = tetrahydrofuran) and [CpTiCl3] (Cp = η5-C5H5) to form the mono- and bis(imidazolin-2-iminato) titanium(IV) complexes [(ImAdRN)TiCl3] (4, R = Mes, Dipp), [Cp(ImAdRN)TiCl2] (5, R = Mes, Dipp), and [(ImAdRN)2TiCl2] (6, R = Mes, Dipp). The crystal structures of all compounds except 2b were determined by X-ray diffraction analysis.

Ruthenium Complexes Featuring Unsymmetrical N-Heterocyclic Carbene Ligands-Useful Olefin Metathesis Catalysts for Special Tasks.

This review describes a distinct class of ruthenium olefin metathesis catalysts featuring unsymmetrical N-heterocyclic carbene (uNHC) ligands, from its historical beginning to the present state of the art. Thanks to advantageous traits, such as pronounced thermodynamic stability, chemical latency, outstanding selectivity, and compatibility with green solvents, these catalysts led to good results in a number of specialized metathesis transformations. Therefore, while being a niche, the uNHC complexes can potentially be implemented in a number of industrial processes, such as valorization of Fischer-Tropsch olefin fractions, ethenolysis of renewable products, and modern pharmaceutical production.

BIAN-NHC Ligands in Transition-Metal-Catalysis: A Perfect Union of Sterically Encumbered, Electronically Tunable N-Heterocyclic Carbenes?

The discovery of NHCs (NHC = N-heterocyclic carbenes) as ancillary ligands in transition-metal-catalysis ranks as one of the most important developments in synthesis and catalysis. It is now well-recognized that the strong σ-donating properties of NHCs along with the ease of scaffold modification and a steric shielding of the N-wingtip substituents around the metal center enable dramatic improvements in catalytic processes, including the discovery of reactions that are not possible using other ancillary ligands. In this context, although the classical NHCs based on imidazolylidene and imidazolinylidene ring systems are now well-established, recently tremendous progress has been made in the development and catalytic applications of BIAN-NHC (BIAN = bis(imino)acenaphthene) class of ligands. The enhanced reactivity of BIAN-NHCs is a direct result of the combination of electronic and steric properties that collectively allow for a major expansion of the scope of catalytic processes that can be accomplished using NHCs. BIAN-NHC ligands take advantage of (1) the stronger σ-donation, (2) lower lying LUMO orbitals, (3) the presence of an extended π-system, (4) the rigid backbone that pushes the N-wingtip substituents closer to the metal center by buttressing effect, thus resulting in a significantly improved control of the catalytic center and enhanced air-stability of BIAN-NHC-metal complexes at low oxidation state. Acenaphthoquinone as a precursor enables facile scaffold modification, including for the first time the high yielding synthesis of unsymmetrical NHCs with unique catalytic properties. Overall, this results in a highly attractive, easily accessible class of ligands that bring major advances and emerge as a leading practical alternative to classical NHCs in various aspects of catalysis, cross-coupling and C-H activation endeavors.

Large-Scale Synthesis of a Niche Olefin Metathesis Catalyst Bearing an Unsymmetrical N-Heterocyclic Carbene (NHC) Ligand and its Application in a Green Pharmaceutical Context.

A large-scale synthesis of known Ru olefin metathesis catalyst VII featuring an unsymmetrical N-heterocyclic carbene (NHC) ligand with one 2,5-diisopropylphenyl (DIPP) and one thiophenylmethylene N-substituent is reported. The optimised procedure does not require column chromatography in any step and allows for preparation of up to 0.5 kg batches of the catalyst from simple precursors. The application profile of the obtained catalyst was studied in environmentally friendly dimethyl carbonate (DMC). Although VII exhibited low efficiency in cross-metathesis (CM) with electron-deficient partners, good to excellent results were noted for substrates featuring easy to isomerise C-C double bonds. This includes polyfunctional substrates of medicinal chemistry interest, such as analogues of psychoactive 5F-PB-22 and NM-2201 and two PDE5 inhibitors-Sildenafil and Vardenafil. Finally, a larger scale ring-closing metathesis (RCM) of a Vardenafil derivative was conducted in DMC, allowing for straightforward isolation of the expected product (23 g) in high yield and with low Ru contamination level (7.7 ppm).

Specialized Olefin Metathesis Catalysts Featuring Unsymmetrical N-Heterocyclic Carbene Ligands Bearing N-(Fluoren-9-yl) Arm

Specialized Olefin Metathesis Catalysts Featuring Unsymmetrical N-Heterocyclic Carbene Ligands Bearing N-(Fluoren-9-yl) Arm

CNC]-Pincer Cobalt Hydride Catalyzed Distinct Selective Hydrosilylation of Aryl Alkene and Alkyl Alkene

The reactions of unsymmetrical N-heterocyclic carbene (NHC) [CNC]-pincer preligands with CoMe(PMe3)4 gave rise to NHC [CNC]-pincer cobalt(III) hydrides, [(CcarbeneNaminoCnaphthyl)Co(H)(PMe3)2] (3a) and (3b), via Csp2–H activation and the unexpected trans-bischelate [Ccarbene, Namino] cobalt(II) complexes 4a and 4b via a disproportionation reaction, respectively. It was found that both 3a and 3b are efficient catalysts for hydrosilylation of alkenes. With aryl alkenes as substrates, 3a has high Markovnikov selectivity in excellent yields, while 3a is an efficient anti-Markovnikov catalyst in good yields with alkyl alkenes as substrates. The catalytic process could be promoted with pyridine N-oxide as an initiator. The catalytic mechanisms for the two different selectivities were proposed. Complexes 3a, 3b, 4a, and 4b were characterized by spectroscopic methods, and the molecular structures of 3b, 4a, and 4b were determined by single crystal X-ray diffraction.

Specialized Olefin Metathesis Catalysts Featuring Unsymmetrical N-Heterocyclic Carbene Ligands Bearing N-(Fluoren-9-yl) Arm

Beneficial structural motifs from two known state-of-the-art olefin metathesis catalysts types, bearing unsymmetrical N-heterocyclic carbenes (uNHCs), were combined into a new hybridized design thereby translating the complementary beneficial reactivity demonstrated by their ‘parent’ complexes to the new N-fluorene derived olefin metathesis catalysts. Two chelating 2-iso-propoxy-benzylidene (Hoveyda-type) and two 3-phenyl-1H-inden-1-ylidene (indenylidene-type) complexes were successfully prepared by in situ generation of either the N′-mesityl (Mes) or N′-diisopropylphenyl (Dipp) derived uNHCs taking advantage of the thermal decomposition of the corresponding 2-(penta-fluorophenyl)-imidazolidines (NHC adducts). The new fluorene-derived catalysts mediate challenging olefin metathesis processes, such as α-olefin self-metathesis, with high selectivity and conversion.

Synthesis of Unsymmetrical N-Heterocyclic Carbene–Nitrogen–Phosphine Chelated Ruthenium(II) Complexes and Their Reactivity in Acceptorless Dehydrogenative Coupling of Alcohols to Esters

Two novel ruthenium complexes RuH(CO)Cl(PPh3)(κ2-CP) (1) and [fac-RuH(CO)(PPh3)(κ3-CNP)]Cl (2) bearing unsymmetrical N-heterocyclic carbene–nitrogen–phosphine (CNP) were synthesized and characteriz...

Recent advances in the application of ring-closing metathesis for the synthesis of unsaturated nitrogen heterocycles.

This short review summarizes recent advances relating to the application of ring-closing olefin-olefin and carbonyl-olefin metathesis reactions towards the synthesis of unsaturated five- and six-membered nitrogen heterocycles. These developments include catalyst modifications and reaction designs that will enable access to more complex nitrogen heterocycles.

Nickel-catalyzed cross-coupling of O,N-chelated diarylborinates with aryl chlorides and mesylates

Practical nickel catalysis for efficient cross-coupling of O,N-chelated diarylborinates with aryl chlorides and mesylates based on air-stable yet readily activated organonickel precursor, trans-NiCl(Ph)(PPh3)2, and sterically unsymmetrical N-heterocyclic carbene in situ generated from imidazolium precursor with trihydrate potassium phosphate in toluene.

Ruthenium Complexes Bearing Thiophene-Based Unsymmetrical N-Heterocyclic Carbene Ligands as Selective Catalysts for Olefin Metathesis in Toluene and Environmentally Friendly 2-Methyltetrahydrofuran.

Three mono-N-heterocyclic carbene (NHC) ruthenium 2-isopropoxybenzylidene (10 a-c) and one bis(NHC) indenylidene complex (8) bearing an unsymmetrical N-heterocyclic carbene ligand were synthesized and structurally characterized by single-crystal X-ray diffraction. The catalytic activity of the newly obtained complexes were evaluated in ring-closing metathesis (RCM) and ene-yne (RCEYM) reactions in toluene and environmentally friendly 2-MeTHF under air. The results confirmed that although all tested reactions can be successfully mediated by catalysts 10 a-c, their general reactivity is lower than the benchmark all-purpose Ru catalysts with symmetrical NHC ligands. However, the latter cannot compete with specialized ruthenium complex 10 a in industrially relevant self-CM of terminal olefins in neat conditions.

Ruthenium(η⁶,η¹-arene-CH₂-NHC) Catalysts for Direct Arylation of 2-Phenylpyridine with (Hetero)Aryl Chlorides in Water.

A series of new benzimidazolium halides were synthesized in good yields as unsymmetrical N-heterocyclic carbene (NHC) precursors containing the N–CH2–arene group. The benzimidazolium halides were readily converted into ruthenium(II)–NHC complexes with the general formula [RuCl2(η6,η1–arene–CH2–NHC)]. The structures of all new compounds were characterized by 1H NMR (Nuclear Magnetic Resonance), 13C NMR, FT-IR (Fourier Transform Infrared) spectroscopy and elemental analysis techniques. The single crystal structure of one benzimidazole ruthenium complex, 2b, was determined. The complex is best thought of as containing an octahedrally coordinated Ru center with the arene residue occupying three sites, the remaining sites being occupied by a (carbene)C–Ru bond and two Ru–Cl bonds. The catalytic activity of [RuCl2(η6,η1–arene–CH2–NHC)] complexes was evaluated in the direct (hetero)arylation of 2-phenylpyridine with (hetero)aryl chlorides in water as the nontoxic reaction medium. These results show that catalysts 2a and 2b were the best for monoarylation with simple phenyl and tolyl chlorides. For functional aryl chlorides, 2d, 2e, and 2c appeared to be the most efficient.

Cyclometallated Platinum(II) Complexes with a Phenylpropene‐Derived π/σ‐Chelator and N‐Heterocyclic Carbenes

A series of heteroleptic platinum(II) complexes of the general formula [PtX(iPrEug)(NHC)] (2–7) bearing the organometallic π/σ‐chelator iPrEug (isopropyl eugenoxyacetate), with varying X (halido) and NHC (N‐heterocyclic carbene) ligands derived from imidazole, benzimidazole, and triazole, were prepared and fully characterized by elemental analyses, ESI mass spectrometry, and IR and NMR spectroscopy. Complexes 3 and 5–7 were also characterized by single‐crystal X‐ray diffraction. These air‐stable complexes are rare examples of platinum(II) compounds containing three different types of carbon donors, that is, aryl, carbene, and olefin. Unsymmetrical NHCs led to rotameric pairs of 4 and 5 exhibiting different NMR spectroscopic features. Spectroscopic studies also revealed that the introduction of a NHC leads to a weakening of the metal–olefin bond and strengthening of the metal–aryl bond. On the other hand, backbone and thus electronic variations among the NHCs show little influence on the bonding of the iPrEug chelator.