The unsteady compressible steam laminar flow associated with heat transfer in fluids in a squared cylinder is examined in this work. The current challenge was created utilizing the CFD approach. The laminar flow is chosen with a low Mach number. With the geometric wall, the flow has a no-slip condition. The pressure on the flow is kept at 0 pas, and the temperature in the flow regime is 305.13. A 0.5 m/s velocity is used to start the flow. With the use of graphics, the effects of time on velocity and pressure distributions are discussed. Different outcomes are also mentioned, such as drag coefficients, lift coefficients, and heat distributions. The velocity drops from 2.5 to 1.6 m/s at t = 7 s in the absence of anybody's force and temperature 305.13 K. Pressure increases from 0.00098 to 0.001 Pas in the flow interval of 10 s. Surface temperature increases from 360 to 375 K in time intervals of 10 s keeping pressure constant. And contour temperature increases from 371.56 to 374.2 K in time intervals of 10 s keeping the pressure constant. This information provides us with caution about the emission of steam from the chimneys of furnaces. It implies that when steam flows from a cylindrical geometry like chimneys of furnaces it heats the upper inner and outer parts which may destroy the material. So for safety, that emission should be taken for a short interval of time otherwise it will result in a havoc process. The lift coefficient remains constant and the drag coefficient increases from 0.0005 to 0.065. Under that condition, fluid has to face more resistance. To overcome that difficulty fluid should be provided with high velocity to continue it for a long time. The technique used to solve modeled problems is the Backward Difference Formula.