Unstable Surface Research Articles

Unstable minimal surfaces in $\mathbb{R}^{n}$ and in products of hyperbolic surfaces

We prove that every unstable equivariant minimal surface in \mathbb{R}^{n} produces a maximal representation of a surface group into \prod_{i=1}^{n}\mathrm{PSL}(2,\mathbb{R}) together with an unstable minimal surface in the corresponding product of closed hyperbolic surfaces. To do so, we lift the surface in \mathbb{R}^{n} to a surface in a product of \mathbb{R} -trees, then deform to a surface in a product of closed hyperbolic surfaces. We show that instability in one context implies instability in the other two.

Inverse relation between motion perception and postural responses induced by motion of a touched object

Self vs. external attribution of motions based on vestibular cues is suggested to underlie our coherent perception of object motion and self-motion. However, it remains unclear whether such attribution also underlies sensorimotor responses. Here, we examined this issue in the context of touch. We asked participants to lightly touch a moving object with their thumb while standing still on an unstable surface. We measured both the accuracy of judging the object motion direction and the postural response. If the attribution underlies both object-motion perception and posture control, sensitivity of posture to object motion should decrease with motion speed since high speed motion is unlikely to reflect self-motion. Furthermore, when motion perception is erroneous, there should be a corresponding increase in postural responses. Our results are consistent with these predictions and suggest that self-external attribution of somatosensory motion underlies both object motion perception and postural responses.

Age-Related Changes in Postural Stability in Response to Varying Surface Instability in Young and Middle-Aged Adults

As individuals transition into middle age, subtle declines in postural control may occur due to gradual reductions in neuromuscular control. The current study aimed to examine the effect of age on bipedal postural control across three support surfaces with varying degrees of instability: a firm surface, a foam pad, and a multiaxial balance board. The effect of surface stability was also assessed. Postural accelerations were recorded using a tri-axial accelerometer placed over the lumbar spine (L5) in 24 young female adults (23.9 ± 5.3 years) and 24 middle-aged female adults (51.4 ± 5.9 years). Sample entropy (SampEn) was used to analyze the complexity of postural control by measuring the regularity of postural acceleration. The main results show significant age-related differences in the mediolateral and anteroposterior acceleration directions (p ≤ 0.012). Young adults exhibit more irregular fluctuations in postural acceleration (high SampEn), reflecting greater efficiency or automaticity in postural control compared to middle-aged adults. Increased surface instability also progressively decreases SampEn in the mediolateral direction (p < 0.001), reflecting less automaticity with increased instability. However, no interaction effects are observed. These findings imply that incorporating balance training on unstable surfaces might help middle-aged adults maintain postural control and prevent future falls.

The Impact of Bilateral Cerebellar Transcranial Direct Current Stimulation on Balance Control in Healthy Young Adults.

Cerebellar transcranial direct current stimulation (tDCS) has been shown to influence movement functions, but little is known about the specific effects of stimulation polarity on balance control. This study investigated the impact of bilateral cerebellar tDCS on balance functions as a function of stimulation polarity. In this randomized, controlled trial, thirty-nine healthy young adults were assigned to one of three groups: right anodal/left cathodal cerebellar stimulation (AC group), right cathodal/left anodal cerebellar stimulation (CA group), and a control sham group. Each participant underwent a daily 30-minute session of tDCS at 2mA for one week. Balance function was assessed pre- and post-intervention and the data were analyzed using generalized estimating equations. The CA group exhibited a significant reduction in sway area when standing on the left leg and on both stable and unstable surfaces with eyes open, compared to both the AC and sham groups. However, there were no significant differences among the groups in terms of sway length, anteroposterior velocity, or mediolateral velocity. Our results indicate the polarity-dependent effects of bilateral cerebellar tDCS on balance functions, with enhanced stability observed only following cathodal tDCS over the right cerebellum paired with anodal tDCS over the left cerebellum. This polarity-specific modulation may have implications for developing cerebellar neuromodulation interventions for movement disorders.

Engineering intervention to disrupt the evolution of ZIF-67: Ultra-fast synthesis of arrayed Co(OH)2@ZIF-L in dozens of seconds for high-energy charge storage

Designing rational heterostructures of high-performance electroactive materials on conductive substrates with hierarchical structures is critical for advancing electrochemical energy storage technologies. In this study, a unique spatial structure is fabricated by vertically aligning two-dimensional (2D) structures of Co-ZIF-L on conductive nickel foam (NF) substrate through interruption of ZIF-67 formation. This is followed by an innovative electrochemical synthesis method that disrupts unstable surface coordination bonds in Co-ZIF-L, enabling the in-situ generation of Co(OH)2. The resulting Co(OH)2@ZIF-L/NF binder-free electrodes feature a hierarchical spatial structure and are synthesized in approximately 30 s. These electrodes showcase exceptional area capacity of 3.1 C cm−2 at 1 mA cm−2, attributed to their high specific surface area and layered architecture that promotes electrolyte penetration. Density Functional Theory (DFT) calculations reveal that the Co(OH)2@ZIF-L nanostructures have superior electrical conductivity compared to the individual components. Furthermore, a hybrid supercapacitor (HSC) based on Co(OH)2@ZIF-L/NF//AC exhibits an impressive energy density of 42 Wh kg−1 at a power density of 184.7 W kg−1. This research provides new insights into the efficient synthesis of high-performance electroactive materials with unique spatial structures and expands the potential applications of ZIF materials.

CATALOG OF LANDSLIDES OF THE CITY OF ZENICE WITH SPECIFIC CAUSES

As part of its activities, the Federal Institute of Geology carries out mapping of active landslides in the territory of the Federation of Bosnia and Herzegovina, and my task is to map instability in the area of the City of Zenica. A very large number of landslides were registered during the catastrophic rainfall that occurred in 2014. Following these phenomena and certain records, detailed mapping of unstable slopes and records of unstable surfaces was started. The cadastre is defined in such a way that it displays all input data with location polygons in GIS. Not in the field, quite recognizable causes were observed, which are always a combination of bad geological and hydrogeological conditions with a significant anthropogenic factor. The slope of the terrain is also very unfavourable, and gravity also played a significant role in the instability of these slopes. Almost all registered landslides have unregulated water (surface, underground, waste). The frequent occurrence of earthquakes on this section also significantly threatened the stability of slopes and buildings, and on the spot, the consequences of cracking and shearing of buildings were evident as a result of the earthquake. A special review will be given to the activation of mudflows during extensive rainfall in this area, which is not rare. A significant share in the formation of mudflows belongs to heavy precipitation, which over time formed the so-called "watersheds" where water was transported from higher to lower parts of the slope. However, during the climate changes, there was a significant increase in the amount and frequency of precipitation, which carried the surface cover and rock blocks that were moved down the steep slopes. Road approaches to the villages, as well as a significant number of buildings, made artificial dams and cut cuts that were a natural way of draining water. So you have a significant number of buildings built exactly on these "watersheds" that represent the dam. In the newly created situation, by changing the natural paths of movement of surface and underground water, it would be necessary to regulate the water below and around the road strip, as well as the drainage of water around buildings. Only after the water has been drained, certain geotechnical procedures can be carried out to stabilize the slope and to permanently rehabilitate it, so that the inhabitants of these villages do not constantly fear during rainfall.

Growth and performance of n++ GaN cap layer for HEMTs applications

Apart from providing high-quality ohmic contacts to III-N devices, n++ GaN cap layers can eliminate surface-related current collapse effects in high-electron-mobility transistors (HEMTs). Various metal-organic chemical vapor deposition conditions and n-type doping are tested in GaN growth on sapphire by using triethylgallium as a Ga precursor, replacing more conventional trimethylgallium. Consequently, despite relatively low temperature of the growth at 800 °C to facilitate InAlN barrier capping, optimized growth conditions and SiH4 flow provided free electron concentration of 7.2 × 1019 cm−3 and mobility of 103 cm2/Vs. Moreover, electron concentration in the range of 1020 cm−3 is demonstrated by using flow modulation epitaxy. On the other hand, as calibration growths indicated, excessive SiH4 flow alone can lead to high density of edge dislocations and surface undulations without enhancing free electron concentration. 6 nm (Si: 4.2 × 1019 cm−3) and 8 nm thick (Si: 7.2 × 1019 cm−3) n++ GaN cap is implemented in normally-off n++ GaN/InAlN/AlN/GaN HEMTs grown on Si, with a collapse-free performance for the latter case. By calculating energy band and free carrier concentration profiles of the heterostructures it is shown, that free electrons of a sufficiently thick and doped n++ GaN cap can shield the channel from the unstable surface potential.

Mechanical properties of pure elements from a comprehensive first-principles study to data-driven insights

Unraveling mechanical properties from fundamental is far from complete despite their vital role in determining applicability and longevity for a given material. Here, we perform a comprehensive study related to mechanical properties of 60 pure elements in bcc, fcc, hcp, and/or diamond structures by means of pure alias shear and pure tensile deformations via density functional theory (DFT) based calculations alongside a broad review of existing literature. The present data compilation enables a detailed correlation analysis of mechanical properties, focusing on DFT-based ideal shear and tensile strengths ( and ), stable and unstable stacking fault energies ( and ), surface energy (), and vacancy activation energy (); and experimental hardness (), ultimate tensile strength (), fracture toughness (), and elongation (). The present work examines models, identifies outliers, and provides insights into mechanical properties, for example, (i) is correlated by , by or , and by ; (ii) data outliers are identified for Cr (related to , , , and ), Be (, , , and ), Hf ( and ), Yb (all properties), and Pt ( vs. ); and (iii) , , , , , , and are highly correlated to elemental attributes, while , , and especially are less correlated due mainly to experimental uncertainty. In particular, the present data compilation provides a solid foundation to model properties such as and of multicomponent alloys and of unstable structures like bcc Ti, Zr, and Hf.

Scaling of vertical coherence and logarithmic energy profile for wall-attached eddies during sand and dust storms

High-frequency observation data, including all three components of instantaneous fluctuating velocity, temperature, as well as particulate matter 10 ( $PM_{10}$ ), collected from the unstable atmospheric surface layer at $z/L = -0.11$ and $-$ 0.12, $L$ being the Obukhov length, during sand and dust storms (SDS), were used to explore the scaling of vertical coherence and the logarithmic energy profile for wall-attached eddies. The present results demonstrate good agreement with the self-similar range of the wall-attached features for velocity and temperature components, as well as for $PM_{10}$ at lower heights ( $z<15$ m) during SDS. Following the idea depicted by Davenport (Q. J. R. Meteorol., vol. 372, 1961, pp. 194–211), an empirically derived transfer kernel comprises implicit filtering via a scale-dependent gain and phase, parametrically defined as $|H_L^2(f)|=\exp (c_1-c_2\delta /\lambda _x)$ , where $c_1$ and $c_2$ are parameters, $\delta$ is the boundary layer thickness and $\lambda _x$ is the streamwise wavelength. Linear coherence spectrum analysis is applied as a filter to separate the coherent and incoherent portions. After this separation procedure, the turbulence intensity decay for wall-attached eddies is described in a log–linear manner, which also identifies how the scaling parameter differs between the measured components. These findings present abundant features of wall-attached eddies during SDS which further are used to improve/enrich existing near-wall models.

Frequency of anterior cruciate ligament injuries and their risk factors in young athletes attended at the Orthopedics and Traumatology Center of the city of Rosario (Argentina) in the year 2023

Introduction: The anterior cruciate ligament (ACL) is one of the most important stabilizers of the knee that prevents anterior translation of the tibia over the femur. ACL injuries commonly occur during sports and are usually caused by sudden stops or changes in direction during running, jumping and landing.Objective: To describe the frequency of anterior cruciate ligament injuries and their risk factors in young athletes attended at the Orthopedics and Traumatology Center of the city of Rosario (Argentina) in the year 2023.Materials and methods: Quantitative, descriptive, observational, cross-sectional and retrospective study, carried out at the Orthopedics and Traumatology Center (COT) from April to September 2023. The population consisted of all patients aged between 18 and 25 years, regardless of sex, who practice high-impact sports on the knee and who consulted for knee injury. The collection instrument was the medical records. The variables were summarized through central position measures (mean) and dispersion measures (range and standard deviation) and expressed in absolute and relative frequency.Results: Thirty medical records were analyzed, of which 100% presented some ACL injury. The mean age was 21.57 ± 2.30 years, 67% were male and 33% female. Regarding the type of injury, 63% presented sprain and 37% tear. Twenty-seven percent played field hockey and rugby respectively, 20% played soccer, 13% basketball, 10% tennis and 3% volleyball. The risk factors associated with ACL injuries found in the studied population were among the intrinsic (50%) the neuromuscular deficit (37%) and genetic risk (13%); while among the extrinsic (23%) were the type of footwear (13%) used and the surface of the field (10%).Conclusions: Patients with ACL injuries evaluated were on average 21.57 ± 2.30 years old with a male: female ratio of 2:1. The most common symptoms were walking instability, edema, swelling, and pain. The most common sports associated with anterior cruciate ligament injuries were field hockey, rugby and soccer. Neuromuscular deficit, genetic risk, improper footwear and unstable field surface were found to be risk factors

Electronic descriptors for dislocation deformation behavior and intrinsic ductility in bcc high-entropy alloys

Controlling the balance between strength and damage tolerance in high-entropy alloys (HEAs) is central to their application as structural materials. Materials discovery efforts for HEAs are therefore impeded by an incomplete understanding of the chemical factors governing this balance. Through first-principles calculations, this study explores factors governing intrinsic ductility of a crucial subset of HEAs—those with a body-centered cubic (bcc) crystal structure. Analyses of three sets of bcc HEAs comprising nine different compositions reveal that alloy chemistry profoundly influences screw dislocation core structure, dislocation vibrational properties, and intrinsic ductility parameters derived from unstable stacking fault and surface energies. Key features in the electronic structure are identified that correlate with these properties: the fraction of occupied bonding states and bimodality of the d-orbital density of states. The findings enhance the fundamental understanding of the origins of intrinsic ductility and establish an electronic structure–based framework for computationally accelerated materials discovery and design.

Effect of training in a sandy environment on foot morphology and function

BackgroundAthletes need to enhance their foot function to improve their performance and prevent injuries and disability. Although foot function is believed to be improved by stabilizing the body on an unstable surface (e.g., a sandy beach), there have been no relevant studies to our knowledge. Here, we identified the differences in foot and balance functions between beach volleyball and volleyball players and investigated the effects of sandy surface training. MethodsWe included six male beach volleyball players (BVB group) and six male volleyball players (VB group). The following six parameters were measured and compared between the groups: foot morphology, plantar surface perception, isometric ankle muscle strength, toe grip strength, static balance, and dynamic balance. ResultsThe BVB group had significantly higher values in sensation perception, isometric ankle dorsiflexion muscle strength, and toe grip strength in the standing posture, with significant intrinsic foot muscle dominance, compared to the VB group. ConclusionPlaying barefoot increases the amount of tactile information received from the surface of the sole, which may lead to enhanced sensory perception by the foot. In addition, owing to the unstable sandy surface, the intrinsic muscles of the foot and lower leg may strengthen to maintain balance; therefore, training on a sandy surface may lead to improved foot and balance functions.

Neutron-producing gas puff Z-pinch experiments on a fast, low-impedance, 0.5 MA linear transformer driver

A study on the neutron production from single and double gas puff Z-pinches on the CESZAR linear transformer driver with ∼0.45 MA current and 170 ns rise time is presented. Total neutron yield measurements made with a LaBr activation detector are compared for three configurations, using a double nozzle setup. When a single, hollow, deuterium gas shell was used, reliable implosions could only be attained at higher load mass than the optimal value to match implosion time with the driver rise time, with neutron yields of ∼106 per pulse. The use of a double gas puff configuration with a deuterium center jet allowed a reduction in the shell density and operation closer to machine-matched conditions, recording up to (4.1 ± 0.3) × 107 neutrons/pulse when either Kr or D2 was used in the shell. For a comparable mass and implosion time, using a higher atomic-number gas in the outer shell results in more unstable plasma surface and smaller plasma radius at the location of instability bubbles, which, however, do not seem to consistently correlate with a higher neutron yield. Comparing implosion dynamics with models and neutron yields with literature scaling suggests that the machine current is not well coupled to the plasma during the final stages of compression. Optimizing current and energy coupling to the pinched plasma is critical to improving performance, particularly in low-impedance drivers.

A Practical Zinc Metal Anode Coating Strategy Utilizing Bulk h‐BN and Improved Hydrogen Redox Kinetics

Achieving high‐performance aqueous zinc‐ion batteries requires addressing the challenges associated with the stability of zinc metal anodes, particularly the formation of inhomogeneous zinc dendrites during cycling and unstable surface electrochemistry. This study introduces a practical method for scattering untreated bulk hexagonal boron nitride (h‐BN) particles onto the zinc anode surface. During cycling, stabilized zinc fills the interstices of scattered h‐BN, resulting in a more favorable (002) orientation. Consequently, zinc dendrite formation is effectively suppressed, leading to improved electrochemical stability. The zinc with scattered h‐BN in a symmetric cell configuration maintains stability 10 times longer than the bare zinc symmetric cell, lasting 500 hours. Furthermore, in a full cell configuration with α‐MnO2 cathode, increased H+ ion activity can effectively alter the major redox kinetics of cycling due to the presence of scattered h‐BN on the zinc anode. This shift in H+ ion activity lowers the overall redox potential, resulting in a discharge capacity retention of 96.1% for 300 cycles at a charge/discharge rate of 0.5 A g−1. This study highlights the crucial role of surface modification, and the innovative use of bulk h‐BN provides a practical and effective solution for improving the performance and stability.

Inorganic surface passivation strategies of metal halide perovskites

AbstractMetal halide perovskites have demonstrated considerable promise across various optoelectronic applications. Surface passivation serves as a pivotal strategy to obtain high‐quality perovskite materials, either in a manner of bulk thin film or nanocrystal, with superior optoelectronic properties and stability. The current research focus in this regard primarily revolves around the use of organic molecules to passivate the surface of perovskites. However, organic passivation molecules always suffer from chemical instability and weak secondary bonding modes, resulting in an unstable surface passivation motif. Inorganic materials, possessing more stable chemical structures and stronger chemical bonding than their organic counterparts, offer the opportunities to construct more robust passivation for the perovskite surfaces. Herein, in this review, we summarized and assessed recent advancements in inorganic surface passivation strategies for perovskite materials and devices, ranging from nanocrystals to bulk films. By discussing the mechanisms behind various inorganic passivation strategies, we aim to offer mechanistic insights and guidelines for future developments of more targeted surface passivation approaches tailored for perovskite materials and devices.

Evaluation of an innovative, open-source and quantitative approach for the kinematic analysis of rock slopes based on UAV based Digital Outcrop Model: A case study from a railway tunnel portal (Finale Ligure, Italy)

This paper presents a novel, cost-effective method for a rapid and quantitative characterization of discontinuities in fractured rock cliffs using Unmanned Aerial Vehicle-derived Digital Outcrop Models (DOMs). The proposed workflow combines manual extraction of discontinuity data from the DOM with a kinematic analysis using an automated algorithm (ROKA), which upgrades and renews the traditional Markland's test. The case study, a designed railway tunnel portal in NW Italy (Finale Ligure) demonstrates the advantages and limitations of this approach compared to current methods. Manual mapping is compared with (semi-)automatic extraction of discontinuity data from the DOM and validated with field-based scan lines. The results show that in complex geological settings, manual mapping provides more statistically robust and geologically reliable measurements of discontinuity orientation, validated by the user's expertise. Traditional stereographic approaches in kinematic analysis are limited in characterizing spatially variable slopes and discontinuity networks, providing only generic estimations of unstable slope surfaces and discontinuity intersections. This limitation is overcome by new algorithms that incorporate 3D spatial relationships of both the discontinuity network and the rock slope, resulting in a more accurate and site-specific kinematic characterization of the rock cliff, emphasized by 3D visualizations of the critical planes and potential rock failure volumes. The new approach significantly impacts the time, effort, and cost of the engineering projects, allowing to quantitatively define the potential unstable areas with a fast analysis. The Authors stress the importance of integrating digital workflows with comprehensive field-based characterizations of the local litho-stratigraphic and structural setting to effectively utilize large datasets and partially automated procedures.

Effects of unstable load and unstable surface ontrunk muscles activation and postural control in healthy subjects

Exercise with an unstable load is considered a new training method to activate the core muscles. Research has shown consistency regarding an unstable surface but has not provided comprehensive findings about the effect of an unstable load. The study aimed to examine the impact of an unstable load and unstable surfaces on core muscle activation and postural control during lifting. Thirty-eight participants lifted a load equivalent to 10 % of their body weight under three conditions: a stable load on an unstable surface, a stable load on a stable surface, and an unstable load on a stable surface. The center of pressure (COP) displacement and electromyography activity of abdominal and back extensor muscles were measured during lifting. The results indicated that lifting on an unstable surface activated the lumbar erector spinae and multifidus muscles more than in a stable condition (P<0.05). However, there was no significant difference in the level of thoracic erector spinae muscle activity between the unstable load and unstable surface conditions. The stable condition increased activity in the internal oblique muscle (1.37 times) compared to the unstable conditions. The analysis of postural control revealed that lifting the load on an unstable surface significantly decreased COP displacement in the anteroposterior direction (P<0.05), while holding the load on the unstable surface significantly increased COP displacement in the anteroposterior direction compared to the other conditions. These findings could be valuable for future rehabilitation research, learning appropriate lifting techniques, and setting specific training goals in sports.

Study of turbulence intermittency in unstable atmospheric surface layer and its effect on saltation sand motion based on wavelet transform

Turbulence in the atmospheric surface layer, especially in deserts and semi-arid regions, significantly affects sand movement. In unstable stratification, turbulence exhibits complex intermittency, complicating its impact on saltation. This study uses wavelet transform analysis to examine the effects of turbulence intermittency in unstable stratification on saltation. Our analysis reveals that in unstable stratification, the energy distribution of turbulence is more dispersed, the intermittent characteristics are more significant, and the intermittent burst duration of streamwise turbulence is longer, while the vertical intermittent burst duration is shorter. The fitting formulas of the energy ratio and stratification stability of the streamwise wind speed, vertical wind speed, and temperature at different frequencies are given. In addition, there is a complex nonlinear relationship between stratification stability and friction velocity on saltation. In unstable stratification, the critical wind speed required for saltation is higher than that of near-neutral, and the jumping speed and horizontal transport are weakened. Moreover, the coherence between wind speed and saltation flux increases significantly at low frequency with the increase in instability, indicating that large-scale motion plays a key role in saltation under these conditions. The more unstable the stratification is, the more obvious the phase difference fluctuation of the low frequency part is, and the more unfavorable the formation of stable saltation sand conditions. This study reveals the turbulence intermittently and its complex effects on sand particle movement in unstable stratification, which is of great significance for predicting and controlling dust storms, land desertification, and soil erosion.

Numerical analysis of atomization characteristics of fuel-jet in crossflow

In order to study the breakup and atomization mechanisms of the fuel-jet in air crossflow and realize the accurate and controllable atomization effect of fuel, this paper proposes a method by coupling the large eddy simulation method and the VOF to DPM method. The results show that the breakup and atomization of the fuel-jet are mainly caused by the Rayleigh–Taylor (R–T) unstable surface wave and the Kelvin–Helmholtz (K–H) instability. The density of fuel-particles is higher near the central region of the fuel jet trajectory, decreasing as distance from the central region increases. As the momentum ratio increases, the penetration depth of the fuel-jet column also increases, resulting in a more concentrated spatial distribution of fuel particles. Conversely, with a lower momentum ratio, the spatial distribution of fuel particles becomes more uniform. For the spatial distribution of fuel particles, a new mathematical model is established to characterize the spatial distribution boundary of fuel particles. At the same momentum ratio, the higher the air velocity, the smaller the average particle diameter. At the same Weg number, the higher the fuel-jet velocity, the higher the average particle diameter. The relative error of the average particle diameter between the experiment and numerical simulation is very small, which is 6.4%.

Balance Control Impairments in Usher Syndrome.

To explore postural disability in Usher Syndrome (USH) patients using temporal posturographic analysis to better elucidate sensory compensation strategies of deafblind patients for posture control and correlate the Activities-specific Balance Confidence (ABC) scale with posturographic variables. Thirty-four genetically confirmed USH patients (11 USH1, 21 USH2, 2 USH 4) from the Otolaryngology Outpatient Clinic and 35 controls were prospectively studied using both classical and wavelet temporal analysis of center of pressure (CoP) under different visual conditions on static and dynamic platforms. The functional impact of balance was assessed with the ABC scale. Classical data in the spatial domain, Sensorial Organization Test, and frequency analysis of the CoP were analyzed. On unstable surfaces, USH1 had greater CoP surface area with eyes open (38.51 ± 68.67) and closed (28.14 ± 31.64) versus controls (3.31 ± 4.60), p < 0.001 and (7.37 ± 7.91), p < 0.001, respectively. On an unstable platform, USH consistently showed increased postural sway, with elevated angular velocity versus controls with eyes open (USH1 [44.94 ± 62.54]; USH2 [55.64 ± 38.61]; controls [13.4 ± 8.57]) (p = 0.003; p < 0.001) and closed (USH1 [60.36 ± 49.85], USH2 [57.62 ± 42.36]; controls [27.31 ± 19.79]) (p = 0.002; p = 0.042). USH visual impairment appears to be the primary factor influencing postural deficits, with a statistically significant difference observed in the visual Sensorial Organization Test ratio for USH1 (80.73 ± 40.07, p = 0.04) and a highly significant difference for USH2 (75.48 ± 31.67, p < 0.001) versus controls (100). In contrast, vestibular (p = 0.08) and somatosensory (p = 0.537) factors did not reach statistical significance. USH exhibited lower visual dependence than controls (30.31 ± 30.08) (USH1 [6 ± 11.46], p = 0.004; USH2 [8 ± 14.15], p = 0.005). The postural instability index, that corresponds to the ratio of spectral power index and canceling time, differentiated USH from controls on unstable surface with eyes open USH1 (3.33 ± 1.85) p < 0.001; USH2 (3.87 ± 1.05) p < 0.002; controls (1.91 ± 0.85) and closed USH1 (3.91 ± 1.65) p = 0.005; USH2 (3.92 ± 1.05) p = 0.045; controls (2.74 ± 1.27), but not USH1 from USH2. The canceling time in the anteroposterior direction in lower zone distinguished USH subtypes on stable surface with optokinetic USH1 (0.88 ± 1.03), USH2 (0.29 ± 0.23), p = 0.026 and on unstable surface with eyes open USH1 (0.56 ± 1.26), USH2 (0.072 ± 0.09), p = 0.036. ABC scale could distinguish between USH patients and controls, but not between USH subtypes and it correlated with CoP surface area on unstable surface with eyes open only in USH1(ρ = 0.714, p = 0.047). USH patients, particularly USH1, exhibited poorer balance control than controls on unstable platform with eyes open and appeared to rely more on proprioceptive information while suppressing visual input. USH2 seems to use different multisensory balance strategies that do not align as well with the ABC scale. The advanced analysis provided insights into sensory compensation strategies in USH subtypes.