In addressing the energy crisis and climate change, environmentally sustainable materials and structures with heightened absorption and enhanced photothermal conversion efficiency are urgently demanded. In this study, a series of ultrabroadband, omnidirectional, and near-perfect solar radiation absorbers based on amorphous carbon (a-C) were fabricated by magnetron sputtering. These absorbers, featuring 4, 6, and 8-layer compact multilayer thin film structures, exhibited measured absorption of 96.8 %, 96.5 %, and 96.6 % in the range of 300–2500 nm, respectively. The high absorption efficiency delves into the synergistic effects of intrinsic absorption of a-C and enhanced absorption through thin film interference. Through microstructure analysis, the reduced absorption compared to design originates from the optical thickness mismatch caused by the unstable growth rate of a-C. In addition, the absorbers show very slight variations in absorption within 40° and maintain a high absorption of more than 80 % in the incident angle of 60°. For samples with different air annealing temperatures from 100 to 250 °C, the microstructure, morphology, and optical properties were systematically investigated. The appearance of oxygen channels due to surface defects or voids leads to the oxidation reaction of the diffused Ti atoms at high temperature. Notably, the proposed absorber can be fabricated by a lithography-free method, paving a way for large-area application of a-C.