Crystal Unit Research Articles

Tuning structures and catalysis performance of two-dimensional covalent organic frameworks based on copper phthalocyanine building block and phenyl connector.

Based on the experimentally reported stable and conductive two-dimensional covalent organic frameworks with copper phthalocyanine (CuPc) as building block and cyan substituted phenyl as connector (CuCOF-CN) as an electrocatalyst for CO2 reduction reaction (RR), first principle calculations were performed on CuCOF-CN and its analog with the CN being replaced by H (CuCOF). Comparatively studied on the crystal structures, electronic properties, and CO2RR performance of the two catalysts found that CuCOF has reduced crystal unit size, more positive charge on Cu and CuPc segments, smaller band gap, and lower reaction barrier for CO2 RR than CuCOF-CN. CuCOF is proposed to be good potential electrocatalyst with good environment friendliness. The substituent effect and structure-property-performance relationship would help for designing and fabricating new electrocatalysts.

Single Electron Self-coherence and Its Wave/Particle Duality in the Electron Microscope.

Intensities in high-resolution phase-contrast images from electron microscopes build up discretely in time by detecting single electrons. A wave description of pulse-like coherent-inelastic interaction of an electron with matter implies a time-dependent coexistence of coherent partial waves. Their superposition forms a wave package by phase decoherence of 0.5 - 1 radian with Heisenbergs energy uncertainty ΔEH = ħ/2 Δt-1 matching the energy loss ΔE of a coherent-inelastic interaction and sets the interaction time Δt. In these circumstances, the product of Planck's constant and the speed of light hc is given by the product of the expression for temporal coherence λ2/Δλ and the energy loss ΔE. Experimentally, the self-coherence length was measured by detecting the energy-dependent localization of scattered, plane matter waves in surface proximity exploiting the Goos-Hänchen shift. Chromatic-aberration Cc-corrected electron microscopy on boron nitride (BN) proves that the coherent crystal illumination and phase contrast are lost if the self-coherence length shrinks below the size of the crystal unit cell at ΔE > 200 eV. In perspective, the interaction time of any matter wave compares with the lifetime of a virtual particle of any elemental interaction, suggesting the present concept of coherent-inelastic interactions of matter waves might be generalizable.

Exploiting Friedel pairs to interpret scanning 3DXRD data from complex geological materials

The present study introduces a processing strategy for synchrotron scanning 3D X-ray diffraction (s3DXRD) data, aimed at addressing the challenges posed by large, highly deformed, polyphase materials such as crystalline rocks. Leveraging symmetric Bragg reflections known as Friedel pairs, our method enables diffraction events to be precisely located within the sample volume. This method allows for fitting the phase, crystal structure and unit-cell parameters at the intra-grain scale on a voxel grid. The processing workflow incorporates several new modules, designed to (i) efficiently match Friedel pairs in large s3DXRD datasets containing up to 108 diffraction peaks; (ii) assign phases to each pixel or voxel, resolving potential ambiguities arising from overlap in scattering angles between different crystallographic phases; and (iii) fit the crystal orientation and unit cell locally on a point-by-point basis. We demonstrate the effectiveness of our technique on fractured granite samples, highlighting the ability of the method to characterize complex geological materials and show their internal structure and mineral composition. Additionally, we include the characterization of a metal gasket made of a commercial aluminium alloy, which surrounded the granite sample during experiments. The results show the effectiveness of the technique in recovering information about the internal texture and residual strain of materials that have undergone high levels of plastic deformation.

Multi-scale correlation of impact-induced defects in carbon fiber composites using X-ray scattering and machine learning

Impact-induced defects in carbon fiber-reinforced polymers (CFRPs)-spanning from nanometer to macroscopic length scales-can be monitored using an aggregate of X-ray-based methods, but this is impractical in typical field conditions. We report on a low-velocity impacted CFRP, which is mapped using small- and wide-angle X-ray scattering and X-ray computed tomography, and employ machine learning for correlating material parameterizations derived from these techniques. The observed 1 μ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\mu$$\\end{document}m to 1 mm-sized defects are parameterized in terms of relative density and fiber orientation indicative of fiber failures (kink bands), and the nanometer sized defects in terms of crystal size and unit cell frustration. The 30 to 300 nm defects are parameterized by a power-law scattering decay, differentiating fractal-like behaviors. We find three spatial domains experimentally and by K-means Clustering: Domains of severe damage (with a visual dent), intact domains (without visual or measurable defects) and a transition domain (defects measurable by X-rays). How the parameters are correlated and how they overlap between the domains are discussed. All parameters are able to point to the detrimental fiber breakage in the severe damage domain, and scattering decay also in the transition domain, for example. How individual parameters determined from one experimental technique can be predicted from that of another is also described.

A mechanism study of type i corrosion on the surface of ancient tin rich bronzes

This study compares the surface patina of ancient tin rich bronze with pure hydrothermally synthesized SnO2 nanoparticles using various analytical techniques, including metallographic microscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and high-angle annular dark-field scanning transmission electron microscopy. The primary crystalline component of the patina consists of approximately 5 nm SnO2 nanoparticles, which closely resemble pure SnO2, indicating their comparability. Cu was also detected in the patina; however, it did not form crystalline structures. The X-ray diffraction results showed a shift in the patina’s peak, suggesting the infiltration of Cu into the SnO2 lattice, which compromises its crystallinity. In comparison to synthetic SnO2, the X-ray photoelectron spectroscopy spectra of the patina revealed novel peaks corresponding to both Cu and O, indicating the presence of Cu−O−Sn bonding—a characteristic feature of type-I patina. This suggests that the primary structure of type-I patina consists of crystalline SnO2 nanoparticles, with a limited amount of Cu integrated into its lattice configuration. The concentration of Cu within the SnO2 crystal units is restricted, leading primarily to the formation of amorphous Cu2O in conjunction with Sn. The presence of Sn enhances the structural stability of Cu2O, facilitating its incorporation while inhibiting the crystallization of Cu2O. However, when the Sn concentration is insufficient, an inadequate Cu–O−Sn amorphous phase may form, allowing for the potential crystallization of Cu2O.

Single-crystal structure, Hirshfeld surface and DFT analyses of chrysomycin A, a marine microbe-derived promising agent for anticancer and antimicrobial therapy

Chrysomycin A (CA) is an important Streptomyces-derived aromatic polyketide with therapeutic potential for treatment of cancer and bacterial infections. In order to prepare highly pure CA for new drug development, a simple and effective strategy to crystallize CA was firstly developed by the liquid phase diffusion method in this work. The single-crystal structure of CA and its Hirshfeld surface property analyses showed that the asymmetric unit of CA crystal consists of one CA molecule and a water in the orthorhombic space group P212121 and it has π-π interactions between benzene rings. CA crystal stacking is consolidated by three intermolecular hydrogen bonds including carbonyl/keto-C-O···H(water), naphthalene-C-O···H(water) and glycoside-O-H···O(water) and van der Waals forces. Furthermore, the HOMO-LUMO energy gap, UV-vis spectral parameters, electrostatic potential, mullliken charge and nonlinear optical properties analyzed in DFT calculations. These results pave a fundamental way for the production of CA using the feasible crystallization approach and the study of molecular mechanisms of action (MoA).

Lithium, sodium and strontium fluoroglutaratouranylates: structure and some properties

Using X-ray diffraction analysis, the structure of the crystals of Li(UO2)2(C5H6O4)2F⋅6H2O (I), NaUO2(C5H6O4)F⋅4H2O (II) and Sr(UO2)2(C5H6O4)2F2⋅8H2O (III) was studied for the first time. The uranium-containing structural units in crystals of I are 1D complexes [UO2(C5H6O4)F0.5(H2O)]0.5– with the crystal chemical formula AQ02M20.5M1, where A = UO22+, Q02 = C5H6O42–, M2= F–, M1 = H2O, and in II and III, 1D complexes of the same composition and structure [UO2(C5H6O4)F]– with the crystal chemical formula AQ02M2. In all compounds, the U(VI) atoms implement hexagonal-bipyramidal coordination, forming coordination polyhedra UO2FO5 (I) and UO2F2O4 (II and III). It was found that the long-characterized uranyl fluoroglutarate {UJUBEG}, for which the composition [UO2(С5H6O4)F]⋅2H2O was erroneously indicated, contradicting the principle of electrical neutrality, should be considered as (Н3O)[UO2(С5H6O4)F]⋅H2O.

Nanoscale Optical Conductivity Imaging of Double-Moiré Twisted Bilayer Graphene.

A central paradigm of moiré materials relies on the formation of superlattices that yield enlarged effective crystal unit cells. While a critical consequence of this phenomenon is the celebrated flat electronic bands that foster strong interaction effects, the presence of superlattices has further implications. Here we explore the advantages of moiré superlattices in twisted bilayer graphene (TBG) aligned with hexagonal boron nitride (hBN) for passively enhancing optical conductivity in the low-energy regime. To probe the local optical response of TBG/hBN double-moiré lattices, we use infrared (IR) nano-imaging in conjunction with nanocurrent imaging to examine local optical conductivity over a wide range of TBG twist angles. We show that interband transitions associated with the multiple moiré flat and dispersive bands produce tunable transparent IR responses even at finite carrier densities, which is in stark contrast to the previously limited metallic near transparency observed only in undoped pristine graphene.

Crystal structures, NCI-RDG, Hirshfeld surface and energy framework analysis of tetra aryl substitute bispidine and oxaquinuclidine core containing derivatives: A potential COVID-19 drug candidate

Two of the title compounds are crystallized in P21/c and monoclinic face groups. Each crystal unit cell has four molecules. There are two piperidine rings: one in the chair conformation and another one in the boat conformation. The piperidine nitrogen in the boat conformation is joined to the oxygen-containing chair conformation piperidine ring to produce the oxaquinuclidine ring (-N-CH2O-). Furthermore, because of the steric barrier between rings, all aryl groups are oriented in an equatorial position. The crystal network is maintained through several interactions, including C—H⋯O/N/Cl/π. The crystal void and interaction energy studies gave additional evidence of the strength of the crystal packing and intermolecular linkage. Crystal 3b has less cavity than crystal 3c, indicating that it is densely packed. The dispersion energy contribution dominates the stability, according to the analysis of the electrostatic, dispersion, and total energy frameworks. Reduced density gradient (RDG), electron localization function (ELF), and localized orbital locator (LOL) analysis were used to determine the molecular interaction, electron pair density, and maximally localized orbitals overlapping sites, respectively. This approach reveals that oxaquinuclidine ring steric hindrance and the electron densities throughout the molecules. Density function theory (DFT) provides more evidence for the ring's orientation and the molecules' reactivity. A molecular docking investigation of four essential COVID-19 proteins was carried out using these theoretical ideas. This investigation demonstrates that each protein's reactivity varies; certain proteins have more interaction with high electron density molecules (electron-donating substituent), while others have more interaction with low electron density molecules (electron-withdrawing substituent). The ADMET and drug-likeness investigations reveal that methoxy group substituted molecules perfectly correlate with the required pharmacological characteristics. The cytotoxicity of the five compounds was assessed using the HEK293T cell.

Enumeration of Spin-Space Groups: Toward a Complete Description of Symmetries of Magnetic Orders

Symmetries of three-dimensional periodic scalar fields are described by 230 space groups (SGs). Symmetries of three-dimensional periodic (pseudo)vector fields, however, are described by the spin-space groups (SSGs), which were initially used to describe the symmetries of magnetic orders. In SSGs, the real-space and spin degrees of freedom are unlocked in the sense that an operation could have different spatial and spin rotations. SSGs give a complete symmetry description of magnetic structures and have natural applications in the band theory of itinerary electrons in magnetically ordered systems with weak spin-orbit coupling. , a concept raised recently that belongs to the symmetry-compensated collinear magnetic orders but has nonrelativistic spin plitting, is well described by SSGs. Because of the vast number and complicated group structures, SSGs have not yet been systematically enumerated. In this work, we exhaust SSGs based on the invariant subgroups of SGs, with spin operations constructed from three-dimensional (3D) real representations of the quotient groups for the invariant subgroups. For collinear and coplanar magnetic orders, the spin operations can be reduced into lower-dimensional real representations. As the number of SSGs is infinite, we consider only SSGs that describe magnetic unit cells up to 12 times crystal unit cells. We obtain 157 289 noncoplanar, 24 788 coplanar-noncollinear, and 1421 collinear SSGs. The enumerated SSGs are stored in an online database with a user-friendly interface. We develop an algorithm to identify SSGs for realistic materials and find SSGs for 1626 magnetic materials. We also discuss several potential applications of SSGs, including the representation theory, topological states protected by SSGs, structures of spin textures, and refinement of magnetic neutron diffraction patterns using SSGs. Our results serve as a solid starting point for further studies of symmetry and topology in magnetically ordered materials. Published by the American Physical Society 2024

Fully Optical Control of Polarization Current Direction in a Cyanide-Bridged Trinuclear Complex.

As a remote and non-contact stimulus, light offers the potential for manipulating the polarization of ferroelectric materials without physical contact. However, in current research, the non-contact write-read (erase) process lacks direct observation through the stable current as output signal. To address this limitation, we investigated the photoinduced polarization switching capabilities of the cyanide-bridged compound [Fe2Co] using visible light, leading to the achievement of rewritable polarization. By subjecting [Fe2Co] crystals to alternating irradiation with 785 nm and 532 nm light, the polarization changes exhibited a distinct square wave pattern, confirming the reliability of the writing and erasing processes. Initialization involved exposing specific crystal units to 532 nm light for storing "1" or "0" information, while reading was accomplished by scanning the units with 785 nm light, resulting in brief current pulses for "1" states and no current signal for "0" states. This research unveils new possibilities for optical storage systems, paving the way for efficient and rewritable data storage and retrieval technologies, such as the next-generation memories.

A Novel Approach for Evaluating the Influence of Texture Intensities on the First Magnetization Curve and Hysteresis Loss in Fe-Si Alloys.

This paper examines the relationship between the magnetization behavior and crystal lattice orientations of Fe-Si alloys intended for magnetic applications. A novel approach is introduced to assess anisotropy of the magnetic losses and first magnetization curves. This method links the magnetocrystalline anisotropy energy of single crystal structures to the textures of polycrystalline materials through a vectorial space description of the crystal unit cell, incorporating vectors for external applied field and saturation magnetization. This study provides a preliminary understanding of how texture influences magnetic loss rates and the first magnetization curves. Experimental results from Electron Back-Scattered Diffraction (EBSD) and Single-Sheet Tests (SSTs), combined with energy considerations and mathematical modeling, reveal the following key findings: (i) a higher density of cubic texture components, whether aligned or rotated relative to the rolling direction, decreases magnetic anisotropy, suggesting that optimizing cubic texture can enhance material performance; (ii) at high magnetic fields, there is no straightforward correlation between energy losses and polarization; and (iii) magnetization rates significantly impact magnetization loss rates, highlighting the importance of considering these rates in optimizing Fe-Si sheet manufacturing processes. These findings offer valuable insights for improving the manufacturing and performance of Fe-Si sheets, emphasizing the need for further exploration of texture effects on magnetic behavior.

Synthesis and Structure of Barium Hexaferrite BaFe12–xInxO19 (x = 0–1)

This study presents the results of the synthesis and examination of indium-substituted barium hexaferrite samples with the formula BaFe12–xInxO19. The ferrites were obtained via a solid state synthesis method. The substitution level of indium, represented by x(In), was varied from 0 to 1 in 0.25 increments. The stoichiometric formulas of the compounds were calculated using the EDS data. The powder X-ray diffraction analysis indicated that all samples form a single crystalline phase with the M-type hexaferrite structure. Parameters of the crystal unit cell were calculated from powder diffraction data. An expansion of the crystal lattice parameters was observed as iron was substituted with indium, from x = 0 to x = 0.84. The Curie temperatures of the synthesized ferrites were determined using differential scanning calorimetry (DSC) method. It is established that the Curie temperature decreases from 452 to 292°C with In content growth from x = 0 to x = 0.84 in the BaFe12–xInxO19.

Topological constraints-induced radiation shielding efficiency of SiO2 α-cristobalite polymorphism: Signatures from Hirshfeld pseudo-surfaces

The paper presents a synergetic and comprehensive investigation into γ-radiation shields properties on SiO2 α-cristobalite subject varying external pressures (0<p < 9.1 GPa). Utilizing crystallographic methods involving γ-rays and Hirshfeld pseudo-surface (HPSs) analyses, we explore the structural responses of SiO2 α-cristobalite to external pressure and its consequent impact on MAC and LAC. The study encompasses a broad energy range (0.015<E < 15.0 MeV), employing online tool for analysis. Our findings reveal that the fundamental shielding characteristics of SiO2 α-cristobalite, including (5.809<MAC<0.021 cm2/g), (3.10 × 1023<Neff< 3.74 × 1023 e/g), (10.32<Zeff<12.43), and (10.79<Zeq<11.56), remain reliable across different polymorphic forms within the energy domain and varying pressures. The LAC values exhibit a clear dependency on both incident photon energies where it's LAC ∈ [0.042 to 11.776] cm−1 as pressure elevated on the crystal. This relationship underscores the influence of pressure-induced changes in crystal density on LAC values. Additionally, changes in lattice parameters (4.975<a<4.599 Å) and bond lengths under pressure contribute to this observed variation in the LAC values. Further analysis of the topological constraints (TCs) (i.e., 1.603<Si⋯O < 1.610 Å, 111.42°<O⋯Si⋯O < 112.00°, and 146.49°<Si⋯O⋯Si < 127.80° bending and twisting angles respectively) reveals defined correlations with LAC values.HPS topological analyses were also employed shed light on valuable insights into the mutual forces of interaction between atoms in the crystal unit cell. Changes in external stress lead to transformations in the HPSs, reflecting the impact of pressure on topological constraints. The evolution of HPS volume (i.e., 179.59-35.24 Å3) and area (i.e., 205.73-161.51 Å2) as well as void's volume (i.e., 10.20-0.17 Å3) and surface area (i.e., 46.10-3.12 Å2) within the crystal lattice is also observed, indicating a direct relationship between HPSs, crystal compactness, electron density and radiation effectiveness. These signatures have been correlated with TCs and thus on the γ-rays shield effectiveness.

Symmetry breaking of bound states in the continuum in luminescence response of photonic crystal slabs with embedded Ge nanoislands

Bound states in the continuum (BIC) have attracted a great deal of attention in all-dielectric nanophotonics due to their ability to provide spectral features with a very high-quality factor. By definition, BIC cannot be observed in the far field because of the symmetry mismatch with the modes propagating in free space. Despite this, in systems with slightly reduced symmetry, the condition for BIC is lifted, which gives rise to the high-quality resonant features in their optical response. In particular, in photonic crystal slabs, which support the BIC states, the symmetry reduction allows modification of light propagation, reflection, or emission. In this work, using the photonic crystal slabs with embedded Ge nanoislands, we have shown the ability to control their light emission features by symmetry breaking. It was demonstrated that such symmetry breaking due to a change in the basis vectors of the photonic crystal unit cell or a change in the unit cell internal structure could provide independent control knobs to alter the spectral position of photonic crystal modes, their dispersion, and degeneracy. The obtained results reveal additional ways to manage the light emission of active media in photonic crystal slabs.

Fully Optical Control of Polarization Current Direction in a Cyanide‐Bridged Trinuclear Complex

As a remote and non‐contact stimulus, light offers the potential for manipulating the polarization of ferroelectric materials without physical contact. However, in current research, the non‐contact write‐read (erase) process lacks direct observation through the stable current as output signal. To address this limitation, we investigated the photoinduced polarization switching capabilities of the cyanide‐bridged compound [Fe2Co] using visible light, leading to the achievement of rewritable polarization. By subjecting [Fe2Co] crystals to alternating irradiation with 785 nm and 532 nm light, the polarization changes exhibited a distinct square wave pattern, confirming the reliability of the writing and erasing processes. Initialization involved exposing specific crystal units to 532 nm light for storing "1" or "0" information, while reading was accomplished by scanning the units with 785 nm light, resulting in brief current pulses for "1" states and no current signal for "0" states. This research unveils new possibilities for optical storage systems, paving the way for efficient and rewritable data storage and retrieval technologies, such as the next‐generation memories.

Role of crystal orientation in attosecond photoinjection dynamics of germanium.

Understanding photoinjection in semiconductors-a fundamental physical process-represents the first step toward devising new opto-electronic devices, capable of operating on unprecedented time scales. Fostered by the development of few-femtosecond, intense infrared pulses, and attosecond spectroscopy techniques, ultrafast charge injection in solids has been the subject of intense theoretical and experimental investigation. Recent results have shown that while under certain conditions photoinjection can be ascribed to a single, well-defined phenomenon, in a realistic multi-band semiconductor like Ge, several competing mechanisms determine the sub-cycle interaction of an intense light field with the atomic and electronic structure of matter. In this latter case, it is yet unclear how the complex balance between the different physical mechanisms is altered by the chosen interaction geometry, dictated by the relative orientation between the crystal lattice and the laser electric field direction. In this work, we investigate ultrafast photoinjection in a Ge monocrystalline sample with attosecond temporal resolution under two distinct orientations. Our combined theoretical and experimental effort suggests that the physical mechanisms determining carrier excitation in Ge are largely robust against crystal rotation. Nevertheless, the different alignment between the laser field and the crystal unit cell causes non-negligible changes in the momentum distribution of the excited carriers and their injection yield. Further experiments are needed to clarify whether the crystal orientation can be used to tune the photoinjection of carriers in a semiconductor at these extreme time scales.

Process-Induced Crystal Surface Anisotropy and the Impact on the Powder Properties of Odanacatib.

Crystalline active pharmaceutical ingredients with comparable size and surface area can demonstrate surface anisotropy induced during crystallization or downstream unit operations such as milling. To the extent that varying surface properties impacts bulk powder properties, the final drug product performance such as stability, dissolution rates, flowability, and dispersibility can be predicted by understanding surface properties such as surface chemistry, energetics, and wettability. Here, we investigate the surface properties of different batches of Odanacatib prepared through either jet milling or fast precipitation from various solvent systems, all of which meet the particle size specification established to ensure equivalent biopharmaceutical performance. This work highlights the use of orthogonal surface techniques such as Inverse Gas Chromatography (IGC), Brunauer-Emmett-Teller (BET) surface area, contact angle, and X-ray Photoelectron Spectroscopy (XPS) to demonstrate the effect of processing history on particle surface properties to explain differences in bulk powder properties.

Tailored Triggering of High-Quality Multi-Dimensional Coupled Topological States in Valley Photonic Crystals

The combination of higher-order topological insulators and valley photonic crystals has recently aroused extensive attentions due to the great potential in flexible and efficient optical field manipulations. Here, we computationally propose a photonic device for the 1550 nm communication band, in which the topologically protected electromagnetic modes with high quality can be selectively triggered and modulated on demand. Through introducing two valley photonic crystal units without any structural alteration, we successfully achieve multi-dimensional coupled topological states thanks to the diverse electromagnetic characteristics of two valley edge states. According to the simulations, the constructed topological photonic devices can realize Fano lines on the spectrum and show high-quality localized modes by tuning the coupling strength between the zero-dimensional valley corner states and the one-dimensional valley edge states. Furthermore, we extend the valley-locked properties of edge states to higher-order valley topological insulators, where the selected corner states can be directionally excited by chiral source. More interestingly, we find that the modulation of multi-dimensional coupled photonic topological states with pseudospin dependence become more efficient compared with those uncoupled modes. This work presents a valuable approach for multi-dimensional optical field manipulation, which may support potential applications in on-chip integrated nanophotonic devices.

Investigations on Growth, Characterization, NCI-RDG, AIM, Molecular Docking and In-Silico ADME Properties of 1,2-Benzene Dicarboxylic Acid Anhydride

Superior single crystal of 1,2-benzene dicarboxylic acid anhydride additionally called Phthalic anhydride (PAN) was developed via solution growth at low temperatures. Single crystal X-ray diffraction investigation revealed the crystal system and unit cell characteristics. The phase stability and crystalline nature were uncovered by powder X-ray diffraction analysis. FT-IR examination was done for the titular material so as to survey the various functional groups. With the use of the VEDA program's relevant resources, vibrational assignments have been made on the concept of Potential Energy Distribution (PED). Density Functional Theory (DFT) was employed to smooth out the molecular structure of PAN and was additionally utilized to consider FT-IR spectrum at molecular level. Non covalent interactions reduced density gradient (NCI-RDG) analysis has been used for the prediction of the weak interaction in the actual space in terms of the electron density along with its derivatives for PAN. Atoms in Molecules (AIM) analysis was carried for out for PAN. The docking research of the small molecule (PAN) with target protein confirmed that this is a great molecule which docks nicely with numerous targets associated with Hypoxia Inducible Factor 1-α. The absorption, distribution, metabolism, excretion (ADME) characteristics have been calculated with the assist of online server preADMET.