Unipolar Pulse Research Articles

Dynamics of Atomic Population Gratings in Collisions of Unipolar Light Pulses in a Multilevel Resonant Medium

Dynamics of Atomic Population Gratings in Collisions of Unipolar Light Pulses in a Multilevel Resonant Medium

Formation of quasi unipolar pulses in nonequilibrium magnetized plasma channels

The possibility of controlling both the spectral and polarization properties of THz pulses propagating in strongly nonequilibrium extended magnetized plasma channels formed by intense UV femtosecond laser pulses in nitrogen (air) is analyzed. The formation of quasiunipolar pulses with a nonzero electric area and a specific state of polarization is discussed. The transformation of such pulses upon leaving the region of a static magnetic field is analyzed.

Effect of micrometer bubble interfaces on the detection and measurement method of XLPE

Hidden air bubble defects in the XLPE (Cross-Linked Polyethylene) insulation will seriously affect its electrical performance, which needs to be detected timely to ensure the safe and stable operation of the power system, but the interfaces between bubbles and XLPE may affect the detection. This paper proposes a novel method for high-precision detection and measurement method of micron-sized bubbles in XLPE based on THz time-domain reflection technology. To analyze the influencing factors limiting the high-precision detection and measurement of micron-sized defects, firstly, the propagation law of THz wave in XLPE with and without defects is studied, and the unipolar and bipolar pulses reflected at the defects are analyzed by overlap, and then a new method of micron-sized defects detection and measurement is proposed based on the overlap property of the bipolar pulses, and the relationship between the minimum detecting frequency and the size of the defects in the various detecting methods is determined. And the finite element method is used to simulate the THz detection of XLPE samples with defect thicknesses of 100, 7, 5, and 3 μm, respectively, and the proposed method is validated in conjunction with experiments. The results show that micrometer defects can be detected and measured with high precision using this proposed method, and the error can be controlled within 4.39%, which is significantly better than the conventional detection method. The proposed method can provide a new idea for non-destructive testing of insulation defects.

Generation of Large-Scale Plasma Jet with Excitation of Bipolar Nanosecond Pulse Voltage in Single-Spiral Electrode Configuration

In this study, a single-outer-spiral electrode with inductance of 20 μH is employed to couple the energy input of a bipolar nanosecond pulse for the purpose of generating a large-scale atmospheric pressure plasma jet. When the spiral electrode is wrapped around a plasma jet tube with a length of 35 cm, the electrical field can be optimized, resulting in a stable laminar flow field, and a plasma jet with a length and diameter larger than 14 cm and 1.2 cm can be generated. A comparative study of the bipolar and unipolar pulse excitation voltages is also conducted, showing that the maximum lengths of the plasma jet excited by a bipolar pulse voltage, positive pulse voltage, and negative are 14 cm, 10 cm, and 7 cm, respectively. The temporal and spatially resolved spectra of the plasma jets excited by both bipolar and unipolar pulses are investigated, respectively, and the main physiochemical processes of the active species and the plasma dynamics’ evolution are discussed.

The Effects of Bipolar Cancellation Phenomenon on Nano-Electrochemotherapy of Melanoma Tumors: In Vitro and In Vivo Pilot.

The phenomenon known as bipolar cancellation is observed when biphasic nanosecond electric field pulses are used, which results in reduced electroporation efficiency when compared to unipolar pulses of the same parameters. Basically, the negative phase of the bipolar pulse diminishes the effect of the positive phase. Our study aimed to investigate how bipolar cancellation affects Ca2+ electrochemotherapy and cellular response under varying electric field intensities and pulse durations (3-7 kV/cm, 100, 300, and 500 ns bipolar 1 MHz repetition frequency pulse bursts, n = 100). As a reference, standard microsecond range parametric protocols were used (100 µs × 8 pulses). We have shown that the cancellation effect is extremely strong when the pulses are closely spaced (1 MHz frequency), which results in a lack of cell membrane permeabilization and consequent failure of electrochemotherapy in vitro. To validate the observations, we have performed a pilot in vivo study where we compared the efficacy of monophasic (5 kV/cm × ↑500 ns × 100) and biphasic sequences (5 kV/cm × ↑500 ns + ↓500 ns × 100) delivered at 1 MHz frequency in the context of Ca2+ electrochemotherapy (B16-F10 cell line, C57BL/6 mice, n = 24). Mice treated with bipolar pulses did not exhibit prolonged survival when compared to the untreated control (tumor-bearing mice); therefore, the bipolar cancellation phenomenon was also occurrent in vivo, significantly impairing electrochemotherapy. At the same time, the efficacy of monophasic nanosecond pulses was comparable to 1.4 kV/cm × 100 µs × 8 pulses sequence, resulting in tumor reduction following the treatment and prolonged survival of the animals.

The interaction between filaments in dielectric barrier discharge excited by bipolar/unipolar nanosecond pulse powers

This study investigates the behavior of discharge filaments in dielectric barrier discharges with a focus on the effects of nanosecond pulse voltage polarity. We observed significant repulsion between discharge filaments when the pin electrode was grounded in bipolar nanosecond pulse discharge. The tilt angle of the filaments was directly proportional to the peak current, which is indicative of charge density. When the bare pin electrode acted as an H.V. electrode, the repulsion phenomenon was diminished. Surface charges released through the bare pin electrode instead of accumulated on the dielectric surface accounts for this phenomenon. The study also highlights the impact of bipolar versus unipolar nanosecond pulse powers. The addition of a water resistor (WR) results in a slower falling edge of the pulse voltage and the absence of subsequent reverse discharges. The repulsion between filaments disappears both in pin-to-ground discharge and pin-to-H.V. discharge. The introduction of WR leads to a reduction of the current pulse’s duration and a premature termination of the discharge process, resulting the influence of surface charges on filament positioning negligible. It is hypothesized that the spatial distribution of ions does not exhibit significant repulsion, attributed to their substantial mass and sparse distribution in space.

High-frequency harmonics suppression in high-speed railway through magnetic integrated LLCL filter.

The traction converter modulation generates switching-frequencies current harmonics. The trapped filters can eliminate these switching harmonics, reducing total inductance and filter size. Nonetheless, in comparison with the typical inductor-capacitor-inductor (LCL) filter, the trap inductor needs a larger magnetic core. Moreover, the trapped filter has not been analyzed in the traction systems. This paper proposes a magnetic integrated inductor-trap-inductor (LLCL) filter to decrease the filter's size and investigate its application in traction converters. In fact, the application range of this filter is quite broad, and it can be used in various electrical power systems, including industrial power systems, renewable energy systems, transportation systems, and building power systems. The LC-trap may be formed by connecting the equivalent trap inductor, introduced through the magnetic coupling between inverter-side and grid-side inductors, in series with the filter capacitor. Furthermore, for H-bridge unipolar pulse width modulation (PWM) traction converters, the prominent switching harmonics are concentrated at the double switching frequencies. Therefore, the stability zone is expanded by moving the resonance above the Nyquist frequency. The presented filter's features and design are thoroughly analyzed. The proposed method is finally validated by the MATLAB/Simulink simulation and hardware-in-the-loop (HIL) experimental results. Compared to the discrete windings, the integrated ones can save two magnetic cores. Furthermore, the proposed filter can meet IEEE criteria with 0.3% for all the harmonics and total harmonic distortion (THD) of 2.15% of the grid-side current.

A relaxor-ferroelectric PMN-PZT thin-film-based drop-on-demand printhead for bioprinting applications with high piezoelectricity and low heat dissipation

This article presents a relaxor ferroelectric, lead magnesium niobate-lead zirconate titanate (PMN-PZT)-thin-film-based piezoelectric drop-on-demand printhead exhibiting high jetting capability and thermal stability. Unlike conventional piezoelectric materials such as lead zirconate titanate (PZT), the PMN-PZT film demonstrates high electrical responsiveness to polarization and reduced hysteresis loss due to polar nano regions, thereby improving printhead’s performance. Our research involves a comprehensive exploration of the fabrication and packaging processes for the PMN-PZT-based printhead, along with optimization of driving pulses to maximize its performance. An in-depth investigation into the dynamics of ferroelectric film’s polarization identifies the best driving conditions that minimize self-heating while maximizing the dynamic displacement of the printhead. As demonstrated in the results, the unipolar pulse, capable of maintaining a consistent polarization direction of the film, yielded twice the displacement compared to driving with a bipolar pulse. Simultaneously, it reduced the thermal dissipation of the printhead by 73.4 %. Consequently, we aim to propose a method for developing ferroelectric thin film-based print heads suitable for various biological modeling research, leveraging their high productivity and thermal stability.

Generation of unipolar electromagnetic pulses in semiconductor nanocrystals

Generation of unipolar electromagnetic pulses in semiconductor nanocrystals

In situ electrodeposited Zn-doped CoNiS as an efficient and stable electrocatalyst for overall water splitting in neutral media

Zinc-doped cobalt nickel sulfides coupled with polypyrrole hollow nanospheres grown on carbon paper (Zn-CoNiS/PHS/CP) were developed by unipolar pulse electrodeposition (UPED) method as efficient and stable electrocatalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting in neutral media for the first time. With abundant active sites intrigued by moderate Zn doping, the optimized Zn10-CoNiS delivers improved catalytic performance with small overpotentials of 213 mV and 414 mV to achieve the current densities of 10 mA cm−2 for HER and OER respectively, and outstanding long-term stability. The water electrolyzer device with Zn10-CoNiS as both anode and cathode delivers a current density of 10 mA cm−2 at a cell voltage of 1.896 V in neutral media. The low charge transfer resistance of Zn-CoNiS and confinement effect of 2D Ni9S8/Co9S8 nanosheets on 0D ZnS nanodots endow the bifunctional electrocatalysts with efficient activity and high stability, providing a competitive candidate for green hydrogen production.

Cardiomyocytes Permeabilization and Electrotransfection by Unipolar and Bipolar Asymmetric Electric Field Pulses.

Short electric field pulses represent a novel potential approach for achieving uniform electroporation within tissue containing elongated cells oriented in various directions, such as electroporation-based cardiac ablation procedures. In this study, we investigated how electroporation with nanosecond pulses with respect to different pulse shapes (unipolar, bipolar, and asymmetric) influences cardiomyocyte permeabilization and gene transfer. For this purpose, rat cardiomyocytes (H9c2) were used. The efficacy of the pulsed electric field protocols was assessed by flow cytometry and electrogene transfer by fluorescent and holotomographic microscopy. The response of the cells was assessed by the metabolic activity (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide[MTT] assay), F-actin distribution in cells by confocal microscopy, and muscle atrophy F-box (MAFbx) marker. We show nano- and microsecond pulse protocols, which are not cytotoxic for cardiac muscle cells and can be efficiently used for gene electrotransfection. Asymmetric nanosecond pulsed electric fields were similarly efficient in plasmid delivery as microsecond and millisecond protocols. However, the millisecond protocol induced a higher MAFbx expression in H9c2 cells.

A microdosimetry analysis of reversible electroporation in scattered, overlapping, and cancerous cervical cells

We present a numerical method for studying reversible electroporation on normal and cancerous cervical cells. This microdosimetry analysis builds on a unique approach for extracting contours of free and overlapping cervical cells in the cluster from the Extended Depth of Field (EDF) images. The algorithm used for extracting the contours is a joint optimization of multiple-level set function along with the Gaussian mixture model and Maximally Stable Extremal Regions. These contours are then exported to a multi-physics domain solver, where a variable frequency pulsed electric field is applied. The trans-Membrane voltage (TMV) developed across the cell membrane is computed using the Maxwell equation coupled with a statistical approach, employing the asymptotic Smoluchowski equation. The numerical model was validated by successful replication of existing experimental configurations that employed low-frequency uni-polar pulses on the overlapping cells to obtain reversible electroporation, wherein, several overlapping clumps of cervical cells were targeted. For high-frequency calculation, a combination of normal and cancerous cells is introduced to the computational domain. The cells are assumed to be dispersive and the Debye dispersion equation is used for further calculations. We also present the resulting strength-duration relationship for achieving the threshold value of electroporation between the normal and cancerous cervical cells due to their size and conductivity differences. The dye uptake modulation during the high-frequency electric field electroporation is further advocated by a mathematical model.

Stable hydrogen evolution reaction at high current densities via designing the Ni single atoms and Ru nanoparticles linked by carbon bridges

Continuous and effective hydrogen evolution under high current densities remains a challenge for water electrolysis owing to the rapid performance degradation under continuous large-current operation. In this study, theoretical calculations, operando Raman spectroscopy, and CO stripping experiments confirm that Ru nanocrystals have a high resistance against deactivation because of the synergistic adsorption of OH intermediates (OHad) on the Ru and single atoms. Based on this conceptual model, we design the Ni single atoms modifying ultra-small Ru nanoparticle with defect carbon bridging structure (UP-RuNiSAs/C) via a unique unipolar pulse electrodeposition (UPED) strategy. As a result, the UP-RuNiSAs/C is found capable of running steadily for 100 h at 3 A cm−2, and shows a low overpotential of 9 mV at a current density of 10 mA cm−2 under alkaline conditions. Moreover, the UP-RuNiSAs/C allows an anion exchange membrane (AEM) electrolyzer to operate stably at 1.95 Vcell for 250 h at 1 A cm−2.

Dynamics of microcavities created by nonharmonic unipolar light pulses in a resonant medium

Dynamics of microcavities created by nonharmonic unipolar light pulses in a resonant medium

A transformerless Z‐source photovoltaic grid‐connected inverter with coupled inductor coil

AbstractThe quasi‐Z‐source H‐bridge grid‐connected inverter (QHGCI) is well known for its advantages of the void of the shoot‐through problem and the high DC‐voltage utilization. But the existence of the common‐mode leakage current in the power frequency cycle, lower power density, and higher thermal stress make it hard applicable to the grid‐penetrating application. Thus with the purpose to conquer the problem relating to the QHGCI, an innovative transformerless Z‐source photovoltaic grid‐connected inverter with a coupled inductor coil (TZPGCI‐CIC) is proposed. The circuitry topology and an unipolar sine pulse width modulation strategy are first introduced in short. Thereafter, the common‐mode voltage in the whole working process is derived and evaluated through the detailed operating mode analysis, in which a constant value of it has been theoretically revealed. Lastly, a prototype platform of TZPGCI‐CIC is set up and its good performance on leakage current suppression, and lower thermal stress are validated with the experimental results.

Analysis and Compensation of Dead Time Harmonics Based on Time Compensation Strategy in the Single-Phase Full-Bridge Inverters

A short period, called dead time, is implemented to prevent power switching devices from shoot-through in voltage-source inverters (VSI). While adding dead time is required in the switching signals, it also causes negative effects on inverter operation such as distortion at output voltage due to significant number of harmonic components, and reduction in voltage magnitude of fundamental components. Eventually, the negative effects caused by dead time have to be compensated with compensation schemes. Different modulation schemes, which are called unipolar and bipolar switching, can be implemented in VSI, which in return might change the dead time effect. Although analysis of bipolar switching on the dead time effect has been implemented, analysis of unipolar switching is not addressed by most. In this paper, the effect of dead time on unipolar sinusoidal pulse width modulation (SPWM) is analyzed, the principle of the proposed compensation strategy is described in detail and the time compensation method with unipolar SPWM scheme is implemented using microprocessor-STM32F407G. The technique is intensively simulated and the evaluated through experimental results on resistive and resistive-inductive loads by comparing uncompensated and compensated states. Simulation and experimental results are presented to demonstrate and confirm the validity of the proposed dead-time compensation method.

Transformerless Inverter with Charge Pump Circuit Concept for PV Application

This paper introduces a new single phase transformerless photovoltaic (PV) inverter for grid connected PV systems using the concept of a charge pump. It consists of four power switches, two diodes, two capacitors and an LC filter at the output stage. The neutral of the grid is directly connected to the negative terminal of PV panel. This common ground creates a constant Common Mode (CM) voltage and zero leakage current. Meanwhile, the charge pump circuit generates the negative bus voltage for the inverter during the negative power cycle. A unipolar Sinusoidal Pulse Width Modulation (SPWM) technique is applied to the proposed inverter with three level output voltage to reduce the output current ripple and the filter requirements. The main advantages of the proposed inverter are (1) the negative polarity of the PV is directly connected to the grid, so the leakage current eliminated, (2) it has a compact size, (3) peak of output voltage is equal to input dc voltage (unlike Neutral Point Clamped (NPC) inverter, Active NPC (ANPC) and some topologies, which requires two times of the peak ac-voltage magnitude), flexible grounding configuration and high efficiency. The operating principle and analysis of the proposed topology are presented in details. Experimental results of a 500 W prototype are demonstrated to validate the proposed topology and the overall concept. The obtained results clearly verify the performance of the proposed inverter and its practical application for grid connected PV systems.

Study on powering electric filters with unipolar high voltage pulses

Study on powering electric filters with unipolar high voltage pulses

Excitation and control of level populations in rectangular quantum wells by unipolar half-cycle attosecond pulses

Unipolar and quasi-unipolar half-cycle pulses represent the limit of the pulse shortening in a given spectral range. So far such pulses have become a subject of active research due to their potential in the ultrafast optics and study of new regimes of light–matter interactions with subcycle resolution. Here, we show the possibility of the effective ultrafast control of the level populations in 1D rectangular quantum wells (such a model is used for modeling semiconductor nanostructures and nanoparticles) by the half-cycle unipolar attosecond light pulses in comparison to the single-cycle ones. It is shown that the population dynamics is determined by the electric pulse area divided into its characteristic “scale,” which is given by the quantum well width when pulse duration is smaller than the orbital period of electrons in the ground state. Both the selective excitation of quantum states and the feasibility of the population inversion by subcycle unipolar pulses are demonstrated.

Li-Ion Cell in Operando Monitoring and Prognostication Using CMUT Devices

Capacitive micromachined ultrasonic transducer (CMUT) devices are ideal solutions for in operando battery monitoring applications especially for consumer electronics. Their minute size (2mm x 1mm x 0.5mm) allows direct placement on the battery without affecting the form factor of the device, the volume production techniques used for their manufacture allow for a very low-cost device, and they can be easily integrated with front-end integrated circuits either in a single device or in a discrete multichip form. Together with industry partners we have developed CMUT devices that we use to continuously monitor the behavior of a battery while it is cycling.For this work we used CMUTs (close-up shown in Fig. 1(a)) developed to operate with a low bias voltage (less than 30 V) which reduces the complexity of the driving hardware. The impulse response and its frequency content are shown in Fig. 1(b). In collapse mode, the peak frequency is 4.0 MHz and the one-way –3 dB BW is 76%, which allows flexibility in setting the drive conditions to interrogate the battery. Our testing also shows that the CMUTs show good device-to-device uniformity and they have a very stable performance in variable temperature environments (e.g. 0℃ - 60℃ ).The cell is interrogated in pulse-echo mode. The CMUT is excited by a wide-band unipolar pulse and the returned analog signal is filtered and amplified. The signal is then digitized and processed to extract features that allow us to quantify the state of the battery. Figure 1(c) depicts such signal features change under baseline cell cycling conditions (three cycles at a charge rate of C/4). These changes are the result of mechanical material property changes in the cell e.g., electrode stiffness and density [1] which directly affect the acoustic wave propagation inside the cell. Figure 1(d) depicts signal feature change due cell overcharge (red line). Ultrasound is especially sensitive to gas generation which occurs as the cell voltage extends beyond normal operating range [2]. Signal features provide early warning notice that cell is outside of normal operating conditions.Figure 1. a) Close-up image of CMUT device. b) CMUT impulse response and corresponding frequency content. c) Signal features (RMS and Time of Flight (ToF)) and thickness change during C/4 charge and discharge. d) Signal features during cell constant current overcharge. Cell overcharged after 4.4V (red line). Chang, W. et al. Measuring effective stiffness of Li-ion batteries via acoustic signal processing. Mater. Chem. A 8, 16624–16635 (2020).Appleberry, M. C. et al. Avoiding thermal runaway in lithium-ion batteries using ultrasound detection of early failure mechanisms. Journal of Power Sources 535, 231423 (2022). Figure 1