Uniform Size Research Articles

Investigation on spectroscopy characteristics of different metamorphic degrees of coal-based graphite

To gain insights into the spectroscopy characteristics from coal to graphite, we investigated different metamorphic degrees of coal-based graphite which were collected from Hunan Province China. In this paper, by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy, graphite with different metamorphism degrees has been characterized to explore the evolution of macromolecular structure of organic matter during graphitization. The results show that with the increase of metamorphism degree, the 002-diffraction peak of the series of samples gradually shrinks and narrows, and the peak intensity becomes stronger, indicating that the microcrystalline structure gradually becomes regular and ordered. As the degree of graphitization increase, the uniformity of particle size in coal samples observed gradually increases, and the morphology becomes more regular, transitioning from disordered and irregular shapes to a structured large-scale flake pattern. The crystallinity improves, and the massive coal particles gradually coalesce into large plate crystals, with the inter-particle pores gradually closing. The graphite structure becomes increasingly evident. The FTIR spectra show that as the degree of graphitization increases, the peak at 1,581 cm−1 corresponding to C=C vibrations gradually intensifies. Some inert functional groups are retained throughout the graphitization process. The pores between coal particles gradually close, and the morphology of graphite particles becomes more regular and ordered. Additionally, during the graphitization process, structures similar to carbon nanotubes may develop. Throughout the structural transformation from coal macromolecules to graphite crystals, the size of the sp2 planar domains in single-layer graphene increases, and the lattice structure of carbon atoms gradually enlarges. These findings contribute to a comprehensive understanding of the properties and characteristics of coal-derived graphite, and can provide theoretical reference and basis for the metallogenic mechanism of coal-derived graphite and the efficient utilization of coal.

Effects of Spray Adjuvants on Droplet Deposition Characteristics in Litchi Trees under UAV Spraying Operations

In the last decade, unmanned aerial vehicles (UAVs) for plant protection have rapidly developed worldwide as a new method for pesticide application, especially in China and other Asian countries. To improve the deposition quality in UAV applications, adding appropriate types of spray adjuvants into pesticide solutions is one of the most effective ways to facilitate droplet deposition and control efficacy. At present, research on spray adjuvants for UAVs are mainly based on droplet drift and laboratory tests. Few studies have been conducted on the physicochemical properties of spray adjuvants and the effects of droplet deposition characteristics. To explore the properties of four different kinds of spray adjuvants (Mai Fei, Bei Datong, G-2801, and Agrospred 910) and the deposition characteristics of spray adjuvants on litchi leaves, an automatic surface tension meter, a contact angle measuring device, an ultraviolet visible spectrophotometer, and a DJI AGRAS T30 plant protection UAV was used to measure the surface tension, contact angle, and droplet deposition characteristics on litchi under UAV spraying operations. The results showed that the addition of spray adjuvants could significantly reduce the surface tension of the solution. The surface tension value of the solution after adding the spray additives was reduced by 53.1–68.9% compared with the control solution. Among them, the Agrospred 910 spray adjuvant had the best effect on reducing the surface tension of the solution. The contact angle of the control solution on the litchi leaves varied from 80.15° to 72.76°. With the increase in time, the contact angle of the spray adjuvant solution gradually decreased, the Agrospred 910 spray adjuvant had the best effect, and the contact angle decreased from 40.44° to 20.23° after the droplets fell on the litchi leaves for 60 s. The adjuvant solutions increased the droplet size, but the uniformity of the droplet size decreased. The Dv0.5 of different spray solutions ranged from 97.3 to 117.8 μm, which belonged to the fine or very fine droplets, and the Dv0.5 of adjuvants solutions were significantly greater than that of the control solution. The RSs of adjuvant solutions were very similar and ranged from 0.92 to 0.96, all of which were significantly greater than the result of the control solution (0.57). Compared with the deposition of the control solution, the Mai Fei, Bei Datong, and G-2801 solutions clearly increased spray deposition, with total depositions of 0.776, 0.705, and 0.721 μL/cm2, which are all greater than the total deposition of the control solution of 0.645 μL/cm2. The addition of tank-mixed adjuvants could effectively increase the uniformity of the spray deposition, and all the average CVs of adjuvant solutions were lower than 96.86%. On the whole, Mai Fei performed best in increasing the spray deposition and promoting penetration, followed by Bei Datong and G-2801. Meanwhile, the test can also provide a reference for improving the utilization rate of UAV pesticide applications.

Self-Templating Synthesis of Mesoporous Carbon Cathode Materials for High-Performance Lithium-Ion Capacitors.

Lithium-ion capacitors (LICs) have attracted considerable interest because of their excellent power and energy densities. However, the development of LICs is limited by the low capacity of the cathode and the kinetics mismatch between the cathode and anode. In this work, mesoporous carbon materials (MCs) with uniform pore sizes were prepared using magnesium citrate as the raw material through a self-templating method. During the carbonization process, MgO nanoparticles generated from magnesium citrate act as a template, resulting in a more orderly pore structure. The resultant MCs demonstrate a high specific surface area of 1673 m2 g-1 and an abundance of small mesopores, which significantly accelerated ion migration within the electrolyte and expedited the formation of electric double layers. Benefiting from these advantages, the MCs cathode demonstrates a high reversible specific capacity, excellent cycling stability, and rate performance. The assembled MCs-based LIC provides a high energy density of 152.2 Wh kg-1 and a high power density of 14.3 kW kg-1. After 5000 cycles, a capacity retention rate of 80% at the current density of 1 A g-1 is obtained. These results highlight the excellent potential of MCs as a cathode material for LICs.

Solvent extraction of titanium(IV) from orthophosphoric acid media using Aliquat-336/kerosene and stripping with nitric acid

Titanium extraction from acidic solutions was investigated using Aliquat-336, considering factors like acid type and concentration for leaching, diluent type for solvent extraction, equilibration time, extractant concentration, phase ratio, and temperature. Kerosene exhibited superior performance as an aliphatic diluent for Aliquat-336 compared to other utilized diluents. The extraction efficiency was inversely proportional to the dielectric constant of the diluents. The quantitative Ti(IV) extraction efficiency from phosphoric acid (6 M H3PO4) leach liquor of ilmenite and rutile achived 98 % at room temperature (298 K) in 10 min after mixing with 0.1 M Aliquat-336 dissolved in kerosene at a phase volume ratio of 1:1 (Aq:Org). The exothermic extraction process occurred spontaneously. The proposed extraction mechanism using Aliquat-336/kerosene involves ion-pair association of the extractant with a Ti(IV) complex, confirmed by FTIR spectroscopy. The Ti(IV) ions were effectively stripped using HNO3 (3 M) with an aqueous:organic phase volume ratio of 1:1 at 25 °C after a contact time of 10 min in each step. The Aliquat-336/kerosene efficiently tested for Ti(IV) recovery from acidic Abu-Ghalaga ilmenite and rutile leachate. The findings indicate that, the phosphate medium is highly efficient in extracting Ti(IV), even with low concentration of Aliquat-336 in kerosene, especially in comparison to the impurities such as Fe, Cr, and Al. The EDX, XRD, and wet chemical analyses of the final product after the hydrolysis of stripped Ti(IV) from samples originating from the Abu-Ghalaga area and rutile samples, confirmed the formation of high-purity TiO2 (predominantly anatase phase). The SEM results showed particles with a regularly spherical structure and uniform size.

Influence of Sodium Ions and Carbon Black on the Formation and Structural Color of Photonic Balls by Silica Particles.

In this study, photonic balls─spherical aggregates of submicrometer-sized silica particles with uniform particle size─were investigated as structural colored materials. The structural color of these photonic balls is influenced by the ordered arrangement of the silica particles. The research focused on how the addition of electrolytes, specifically NaCl, affects the formation of photonic balls to achieve the desired structural color. Without NaCl, the photonic balls formed onion-shaped colloidal crystals. At NaCl concentrations above 0.006 mol/L, the particles aggregated into short-range ordered structures. When the concentration exceeded 0.05 mol/L, the aggregates lost their spherical shape. The study also explored the addition of carbon black (CB), a water-dispersible material due to its surface charge. The findings revealed that NaCl induced the phase separation between the charged silica particles and CB, resulting in Janus-shaped photonic balls─one side exhibiting structural color and the other side appearing black due to the presence of CB. Changing the silica particle size altered the hues of these Janus-shaped photonic balls, though they appeared uniformly colored to the naked eye. While this study did not specifically examine the applications of Janus-shaped photonic balls composed of silica particles and CB, CB is known for its ability to absorb near-infrared radiation and convert it into heat as well as its conductive properties. Silica, on the other hand, has a low thermal conductivity and acts as an electrical insulator. The structurally colored Janus-shaped photonic balls created in this study may serve as pigments in applications requiring anisotropic heat generation and electrical conduction. Additionally, the study's findings suggest the potential for creating various types of Janus-shaped photonic balls from materials with differing densities.

Nanoporous Aramid Nanofiber Separators with High Modulus and Thermal Stability for Safe Lithium-Ion Batteries.

Developing high-safety separators is a promising strategy to prevent thermal runaway in lithium-ion batteries (LIBs), which stems from the low melting temperatures and inadequate modulus of commercial polyolefin separators. However, achieving high modulus and thermal stability, along with uniform nanopores in these separators, poses significant challenges. Herein, the study presents ultrathin nanoporous aramid nanofiber (ANF) separators with high modulus and excellent thermal stability, enhancing the safety of LIBs. These separators are produced using a microfluidic-based continuous printing strategy, where the flow thickness can be meticulously controlled at the micrometer scale. This method allows for the continuous fabrication of nanoporous ANF separators with thicknesses ranging from 1.6 ± 0.1µm to 2.7 ± 0.1µm. Thanks to the double-side solvent diffusion, the separators exhibit controllably uniform pore sizes with a narrow distribution, spanning from 40 ± 5nm to 105 ± 9nm, and a high modulus of 3.3 ± 0.5GPa. These nanoporous ANF separators effectively inhibit lithium dendrite formation, resulting in a high-capacity retention rate for the LIBs (80% after 240 cycles). Most notably, their robust structural and mechanical stability at elevated temperatures significantly enhances LIB safety under transient thermal abuse conditions, thus addressing critical safety concerns associated with LIBs.

Study on Thermally Induced Lignin Aggregation Kinetics for the Preparation of Uniformly Sized Lignin Nanoparticles in Water.

Lignin nanoparticles (LNPs) present a potential avenue for the high-value utilization of lignin. However, the simple and ecofriendly method of thermally induced self-assembly for the preparation of LNPs has been overlooked due to a lack of sufficient understanding of the lignin aggregation mechanism. Therefore, this study focuses on the kinetics of thermally induced lignin aggregation. It was found that lignin aggregates formed at lower temperatures exhibit poor stability and are more prone to continuous growth through coalescence. This apparent contradiction with the conventional understanding of thermoresponsive polymers could be attributed to changes in the viscoelasticity of the lignin aggregates during phase separation. Based on this finding, we worked out strategies to optimize the preparation of LNPs in water through thermally induced self-assembly. Pure LNPs with well-defined interfaces and a minimum polydispersity index (PDI) of 0.12 were obtained by increasing the temperature to 125-150 °C. Furthermore, combined with noncovalent modification, LNPs with a PDI of 0.08 would even be formed at 80 °C. Notably, the resulting pure LNPs show potential for application in photonic crystal products that require excellent monodispersity. This study provides a new approach for the environmentally friendly preparation of LNPs with a controllable morphology.

Generating controllable optical trap arrays with a polarization-based metalense

Metalenses have been widely used in various optical systems due to their compact size, lightweight nature and high efficiency. This paper presents a novel metalense for generating multiple optical trap arrays. The proposed metalense is composed of many unit cells of half-wave plate. By changing the polarization state of the incident light, the optical trap array generated by the metalense can be controlled. To evaluate its performance, we simulate the metalense with total trap numbers of 4 and 6 respectively. The results show that the produced optical trap arrays exhibit precise positioning, uniform size, and intensity distribution. Furthermore, the arrays maintain excellent uniformity and shape integrity even when the number of optical traps is increased. Compared with the previous metalenses only produce a specific optical trap array, the designed metalense offers higher flexibility and better meets the experimental requirements of multi-trap optical tweezers. Our metalense exhibits significant potential for the integration and miniaturization of optical trap arrays, as well as other focusing optical systems.

Dynamic fracture mechanism and fragment characteristics of sandstone specimens with asymmetrical conjugate fissures under static pre-compression

This paper systematically investigates the dynamic mechanical response and fragment characteristics of sandstone with asymmetrical conjugate fissures subjected to preexisting static stress based on the split Hopkinson pressure bar apparatus. The cross-fissured sandstone exhibits significant variations in mechanical behavior when exposed to higher dynamic strain rates under identical static pre-stress. The cross-fissured sandstone with a higher dynamic strain rate is characterized by a greater coupled strength under the same static pre-stress; for a given dynamic load, the highest coupled strength occurs under the static pre-stress of 60% UCS. The failure mode of the cross-fissured sandstone is predominantly governed by the dynamic strain rate, independent of static pre-stress variations considered in this investigation. At lower dynamic strain rates, the specimens typically exhibit a mixed tensile-shear failure mode, characterized by the dominance of larger fragments in the broken specimens. In contrast, under high dynamic impacts, the sandstone tends to fail in a shear-dominated manner, resulting in smaller fragments with a more uniform size distribution. Furthermore, the study explores how varying dynamic strain rates and static pre-stress influence the fragment characteristics of the cross-fissured sandstone. Higher dynamic strain rates and increased static pre-stress generally lead to smaller mean fragment sizes. This phenomenon is quantitatively described by fitting fragment size distributions using the Generalized Extreme Value (GEV) distribution, revealing a decrease in the location parameter (μ) and an increase in fractal dimension. These metrics indicate that higher dynamic strain rates and static pre-stress result in sandstone specimens breaking into smaller fragments with a more homogeneous size distribution. These findings contribute to a deeper understanding of rock dynamics, with potential implications for engineering applications involving similar geological configuration under dynamic loading conditions.

Regression Models for Tree Volume Prediction in Pinus Wallichiana Stands of South Western Himalayan Region of Kashmir

This study focuses on assessing tree species diversity and evaluating the efficacy of both linear and non-linear regression models for predicting tree volume. The research was conducted in the slopes of the Pir Panjal range within the Shopian Forest Division, situated in the South-Western Himalayan Region of Kashmir. Data on Pinus wallichiana stands, including diameter at breast height (D) and tree height (H), were meticulously collected using appropriate measurement instruments. Employing a multi-stage sampling technique, ten plots of uniform size (10m x 10m) were selected across 20 blocks, and subsequently, 25 trees were randomly chosen from each plot. Six different linear and non-linear regression equations were fitted to the data, and the most suitable equation was identified for volume estimation. To evaluate the performance of the fitted regression models, metrics such as R-squared (R²), adjusted R², root-mean-square error (RMSE), and Theil’s U statistic were employed. Additionally, validation procedures involved using the half-split approach and the Chow test. Upon analysis, it was determined that when employing diameter (D) and considering the joint effectof diameter and height (D2H (I)) as independent variables, the linear model (V=-1.41+15.12D) and power model (V=2.301 I0.502), quadratic model (V=1.8726+0.663 I- 0.011 I²) with highest R², lowest RMSE and Theil’s U statistic respectively, emerged as the most suitable for volume estimation, demonstrating superior accuracy compared to alternative models. Consequently, our findings extend beyond academic inquiry, offering practical implications for sustainable forest management and planning in the Western Himalayan Regions of Kashmir. By providing robust volume estimation models tailored to Pinus wallichiana stands, our study equips forest managers and policymakers with essential tools for informed decision-making.

Rationally designed febuxostat-based hydroxamic acid and its pH-Responsive nanoformulation elicits anti-tumor activity

Attempts to furnish antitumor structural templates that can prevent the occurrence of drug-induced hyperuricemia spurred us to generate xanthine oxidase inhibitor-based hydroxamic acids and anilides. Specifically, the design strategy involved the insertion of febuxostat (xanthine oxidase inhibitor) as a surface recognition part of the HDAC inhibitor pharmacophore model. Investigation outcomes revealed that hydroxamic acid 4 elicited remarkable antileukemic effects mediated via HDAC isoform inhibition. Delightfully, the adduct retained xanthine oxidase inhibitory activity, though xanthine oxidase inhibition was not the underlying mechanism of its cell growth inhibitory effects. Also, compound 4 demonstrated significant in-vivo anti-hyperuricemic (PO-induced hyperuricemia model) and antitumor activity in an HL-60 xenograft mice model. Compound 4 was conjugated with poly (ethylene glycol) poly(aspartic acid) block copolymer to furnish pH-responsive nanoparticles (NPs) in pursuit of circumventing its cytotoxicity towards the normal cell lines. SEM analysis revealed that NPs had uniform size distributions, while TEM analysis ascertained the spherical shape of NPs, indicating their ability to undergo self-assembly. HDAC inhibitor 4 was liberated from the matrix due to the polymeric nanoformulation's pH-responsiveness, and the NPs demonstrated selective cancer cell targeting ability.

Top-Down Synthesis of N-Type PbS Quantum Dots with High Photoluminescence Quantum Yield from Microsized Pb(OH)Cl.

Synthesis of PbS quantum dots (QDs) with uniform and controllable size is of great importance in realizing functionality manipulation, as well as building advanced devices, and these QDs have been normally synthesized via "bottom-up" colloidal chemistry. However, the problems of complicated techniques and the relative high cost of the "bottom-up" methods still need to be overcome. Herein, we present a facile and cost-effective "top-down" strategy for the production of PbS QDs with controllable sizes and narrow dispersions (4.8% < σ < 7%) based on the sulfuration reaction of highly active lead oxide and oxychloride intermediates. We investigated the two-step reaction mechanism of the QD synthesis. Initially, Pb(OH)Cl undergoes a reaction with oleic acid in the presence of oleylamine as an activator, leading to the formation of active lead oxide/oxychloride intermediates. Notably, this distinctive reaction induces the creation of numerous cracks within the intermediates, thereby augmenting the active sites available for the subsequent sulfuration reactions. In that, the sulfur precursor reacts with the intermediates, resulting in the rapid generation of a substantial number of PbS fragments. Over time, these small fragments undergo "ripening" until reaching the "critical" size threshold. Different from the ones obtained by the traditional "bottom-up" method, our synthesized colloidal QDs exhibit a S-rich surface and are confirmed to be N-type. In addition, size-tunable near-infrared photoluminescence renders these QDs a promising material for various applications.

Incorporation of carboxymethyl chitosan (CMCS) for the modulation of physio-chemical characteristics and cell proliferation environment of the composite hydrogel microspheres

Hydrogels have excellent swelling properties and have been widely applied in tissue engineering because of their similarity to the extracellular matrix (ECM). Sodium alginate (SA) and carboxymethyl chitosan (CMCS) were prepared into hydrogel microspheres with Ca2+crosslinking in our study. The morphology, inner structure, mechanical properties, water content, swelling rate and BMP-2 loading and releasing properties were characterized. Our results showed that the composite SA /CMCS hydrogel microspheres were translucent and spherical in shape with uniform particle size. The incorporation of CMCS further increased the diameters of the microspheres, internal pore structure, water content, and mechanical properties of the SA/CMCS hydrogel microspheres. At the same SA concentration, with the increase of CMSC concentration, the diameter of microspheres could be increased by about 0.4 mm, the water content can be increased about 1%-2%. As for the mechanical properties, the compressive strength can be increased by 0.04-0.1 MPa, and the modulus of elasticity can be increased by 0.1-0.15 MPa. BMP-2 was chosen as a model agent and it could be loaded into SA/CMCS microspheres, and the incorporation of CMCS increased BMP-2 loading. The encapsulated BMP-2 was sustainably releasedin vitro. The leaching solutions of the SA/CMCS hydrogel microspheres exhibited good cytocompatibility and could increase ALP activity, ALP expression, and biomineralization on MC3T3-E1 cells. After 7 d of co-culture, ALP activities in S2.5C2 and S2.5C3 groups was increased by 50% and 45% compared with that of the control group. When embedded in the SA/CMCS microspheres, the MC3T3-E1 cells were evenly distributed inside the hydrogel microspheres and remained viable. Transcriptomic studies showed that incorporation of CMCS induced upregulation of 1141 differentially expressed genes (DEGs) and downregulation of 1614 DEGs compared with SA microspheres. The most significantly enriched pathways were the Wnt and MAPK signaling pathways induced by the incorporation of CMCS and BMP-2. In conclusion, our results indicated that the physiochemical characteristics of the SA hydrogel microspheres could be greatly modulated by CMCS to better mimic the ECM microenvironment and induce osteo-inductive activities of MC3T3-E1 cells.

An improved solution of the probability density evolution equation for analyzing stochastic structural responses with adaptive time steps and initial conditions

The probability density evolution method (PDEM) offers an innovative approach for analyzing the stochastic vibration responses of structures. Given the complexities inherent in real-world challenges, the probability density evolution equations (PDEE) often require numerical methods for effective resolution. Consequently, improving computational efficiency and solution accuracy is of paramount importance. Currently, the impulse function discretization method (IFDM) faces several challenges, including limited differentiability in the spatial direction for initial value conditions. Furthermore, the probability density function produced by this method frequently deviates significantly from the true value, undermining the accuracy of the PDEE. Additionally, when addressing vibration responses characterized by rapid evolutionary velocities, the use of a globally fixed uniform time step size (FUTSS) results in a marked decrease in computational efficiency. To tackle these challenges, this study introduces an improved probability density evolution method (IPDEM), which integrates the Gaussian kernel density estimation discretization method (GKDEDM) and an adaptive non-uniform time step size (ANUTSS). The advantages of the IPDEM are illustrated through two numerical simulation examples. The findings indicate that the GKDEDM not only enhances spatial differentiability but also provides a more accurate estimation of the probability density at the initial moment, thereby improving the accuracy of the PDEE. Furthermore, the ANUTSS significantly reduces the number of iterations required while preserving precision, leading to a substantial optimization of computation time.

Biomimetic modification of macrophage membrane-coated prussian blue nanoparticles loaded with SN-38 to treat colorectal cancer by photothermal-chemotherapy.

SN-38 is the active metabolite of irinotecan and acts as an effective topoisomerase I inhibitor with therapeutic effects on many malignant tumors, including some drug-resistant cancers. However, the poor solubility, low bioavailability, and severe dose-dependent toxicity limits the clinical application of SN-38. Currently, emerging macrophage membrane-coated nanoparticles provide an efficient biomimetic approach to develop novel SN-38 formulations for the reduction of its side effects. Photothermal therapy (PTT) is a promising methods in tumor treatment to thermally ablate tumors using various materials such Prussian blue nanoparticles (NPs) and can combined with chemotherapy to synergistically work. There is no report that combined SN38 and photothermal therapy for the treatment of colorectal cancer (CRC). SN38-PB@CM NPs were constructed by loading SN-38 into macrophage cell membrane-coated hollow mesoporous Prussian blue (PB) NPs. The morphology, size and zeta potential were evaluated by transmission microscopy and dynamic light scatter (DLS). Coomassie bright blue staining was performed to assess total protein profile. The photothermal properties of it were also investigated via near-infrared imaging. CCK8 and calcein-AM/PI staining were used to evaluate cell viability. Flow cytometry was performed to assess cell apoptosis. The fluorescent microscopy was used to observe cellular uptake of SN38-PB@CM NPs to assess its internalization in vitro. The biodistribution, tumor-targeting efficacy, antitumor efficacy and safety of SN38-PB@CM NPs in vivo were assessed in CT26 tumor-bearing mice via In Vivo Imaging System. SN38-PB@CM NPs were successfully constructed and exhibited a uniform size distribution (140.5 ± 4.3nm) and an excellent drug-loading capacity (5.61 ± 0.64%). SN38-PB@CM NPs showed stable release properties within 72h. It can also enhance the selective intracellular delivery of SN38 in vitro and showed good near-infrared (NIR) photothermal properties. And the NPs showed excellent tumor targeting, effective photothermal therapy, improved biosafety and antitumor efficacy on CT26-bearing mice. Multifunctional SN38-PB@CM NPs could achieve improved biosafety, great tumor-targeting, high-efficiency PTT and excellent antitumor efficacy, which provided a promising and attractive combination therapy for the treatment of CRC.

Fast and selective isoprene gas sensor: Influence of polystyrene size and role of the au catalyst on gas sensing properties

Sacrificial methods using polystyrene (PS) templates are extensively applied in various research fields, particularly for fabricating gas sensors. The many processing advantages of these methods, such as a uniform particle size distribution, ease of manipulation, and potential for functionalization enable the fabrication of intricate nanostructures with precise control of the geometry and surface-area-to-volume ratio. Nevertheless, no previous study has investigated the fundamental correlation between the size of the PS particles used as a template and the performance of the resulting functional gas sensor. In this study, we fabricated In2O3 hollow hemispheres (HHs) with PS template sizes ranging from 200 to 3000 nm to explore the essential aspects for gas sensor applications. Notably, compared to In2O3 thin films, In2O3 HHs-based sensors prepared using a 3000 nm PS template exhibited a larger surface area, particularly when formed in a monolayer, and achieved an enhanced gas response to C2H5OH by approximately 132 times. By decorating In2O3 HHs with Au nanoparticles, the detection of C5H8 at 350 ℃ among various volatile organic compounds was significantly enhanced (increase ratio = 31.7), achieving a response of 483 and a theoretical detection limit as low as 743 parts per trillion (ppt). In addition, the highly porous structure with Au decoration achieved an extremely short response time of less than 2 s. These unprecedented results provide critical insights into conventional sensor technologies and pave the way for potential health-monitoring applications and bioelectronics.

Modulating pro-fibrotic macrophages using yeast beta-glucan microparticles prepared by Pressurized Gas eXpanded liquid (PGX) Technology®

Pro-fibrotic M2-like macrophages are widely implicated in the pathogenesis and progression of lung fibrosis due to their production of pro-fibrotic growth factors and cytokines. Yeast beta-glucan (YBG) microparticles have shown potential as immunomodulators that can convert macrophage polarization from a pro-fibrotic phenotype to an anti-fibrotic phenotype through the engagement of the Dectin-1 receptor. However, the processing conditions used to fabricate YBG microparticles can lead to unpredictable immunomodulatory effects. Herein, we report the use of Pressurized Gas eXpanded liquids (PGX) Technology® to fabricate YBG (PGX-YBG) microparticles with higher surface areas, lower densities, and smaller and more uniform size distributions compared to commercially available spray-dried YBGs. PGX-YBG is shown to activate Dectin-1 more efficiently in vitro while avoiding significant TLR 2/4 activation. Furthermore, PGX-YBG microparticles effectively modulate M2-like fibrosis-inducing murine and human macrophages into fibrosis-suppressing macrophages both in vitro as well as in ex vivo precision-cut murine lung slices, suggesting their potential utility as a therapeutic for addressing a broad spectrum of fibrotic end-point lung diseases.

Co-delivery of Liposomal Ketoconazole and Bevacizumab for Synergistical Inhibition of Angiogenesis Against Endometrial Cancer.

In this study, we designed a novel formulation based on liposomes for the co-delivery of cancer-derived exosome inhibitor (ketoconazole, Keto) and angiogenesis inhibitor (bevacizumab, mAb). The designed Combo-Lipo formulation was systematically characterized, exhibiting a uniform average particle size of 100nm, as well as excellent serum and long-term physical stabilities. The cell viability assay revealed that Combo-Lipo treatment significantly reduced the viability of cancer cells compared to free drugs. Moreover, liposomes effectively inhibited angiogenic mediators and reduced tumor immune suppressive factors. The Combo-Lipo formulation demonstrated potent downregulation of angiogenic factors and synergistic effects in suppressing their production. Furthermore, liposomes inhibited tumor-associated macrophages (TAMs), leading to decreased expression of tumor-promoting factors. Together, these findings highlighted the promising characteristics of Combo-Lipo as a therapeutic formulation, including optimal particle size, serum stability, and potent anti-cancer effects, as well as inhibition of angiogenic mediators and TAMs toward treating endometrial cancer.

How Reproducible Is Feraheme® (Ferumoxytol Injection)? Comparison of Size, Zeta Potential, and Complement Activation of Different Batches over 15 Years

Ferumoxytol injection, also known as Feraheme®, is an approved IV injectable iron supplement and an experimental MRI contrast agent. Initially, it was approved as an IV bolus agent, but its use was later limited to a slow infusion drip due to high levels of infusion reactions. We collected various batches of ferumoxytol with expiration dates ranging from 2010 to 2025 and compared their size and zeta potential. Since nanoparticle surface properties can affect infusion reactions, we conducted a dot blot immunoassay to measure complement C3 opsonization with ferumoxytol preparations. We observed differences in nanoparticle size and zeta potential between batches and a 2.5-fold variation in complement activation. Interestingly, older batches from 2010 showed more uniform size distribution and lower complement activation than some of the newer batches. This finding may be valuable to the nanomedicine community and regulatory authorities.

Study of the Effect of Manganese on The Structural and Optical Properties of Sno2 Membranes

The effect of manganese addition on precipitated tin dioxide on quartz was studied using the pulsed laser method if the X-ray diffraction results showed that the pure tin oxide membrane has a polycrystalline structure and a quaternary phase, with growth in the crystalline directions (110), (101), (200), and (211) and the predominant ones were (101). Using a high-benefit electron scanning microscope (FE-SEM), the results showed that the addition of manganese smearing in small proportions significantly affected the surface nature and grain size, as the surface uniformity and grain size increased with increasing the percentage of distortion. Through optical examinations through the permeability spectrum of thin films of pure and tinged tin oxide, a gradual increase in permeability with an increase in the concentration of impurities, reaching high values ranging between 80-90%. As for the energy gap, the energy gap for manganese-inlaid membranes has been increased from 3.33 eV for the pure membrane to 3.57 eV. The sensing properties of these membranes were studied as a function of time at temperatures between 50-200 °C .