Unfolding Temperature Research Articles

A thermodynamic investigation into protein–excipient interactions involving different grades of polysorbate 20 and 80

Developing stable biopharmaceutical formulations is of paramount importance and is typically achieved by incorporating surfactants as stabilising agents, such as polysorbate 20 and 80. However, little is known about the effect surfactant grade has on formulation stability. This study evaluates the effect of regular grade and Super-refined™ polysorbates 20 and 80 and their interaction with model proteins, namely β-lactoglobulin (β-Ig), human serum albumin (HSA) and immunoglobulin gamma (IgG), using isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC). ITC results indicated that all four polysorbates underwent binding interactions with β-Ig and HSA, yet no interaction was observed with IgG this is postulated to be a consequence of differences in secondary structure composition. Surfactant binding to β-Ig occurred at ratios of ~ 3:2 regardless of the surfactant used with dissociation constants ranging from 284 to 388 µM, whereas HSA bound at ratios of ~ 3:1 and dissociation constants ranging from 429 to 653 µM. Changes in enthalpy were larger for the surfactant interactions with HSA compared with β-Ig implying the former produced a greater binding interaction than the latter. DSC facilitated measurement of the temperature of unfolding of each protein with the presence of each polysorbate where results further confirmed interactions had occurred for β-Ig and HSA with an increased unfolding temperature between 4 and 6 K implying improved protein stability, yet again, no interaction was observed with IgG. This study thermodynamically characterised the role of polysorbates in protein stabilisation for biopharmaceutical formulations.

Systematic Preparation of a 66-IgG Library with Symmetric and Asymmetric Homogeneous Glycans and Their Functional Evaluation.

Immunoglobulin G (IgG) antibodies possess a conserved N-glycosylation site in the Fc domain. In FcγRIIIa affinity column chromatography, unglycosylated, hemiglycosylated, and fully glycosylated IgG retention times differ considerably. Using retention-time differences, 66 different trastuzumab antibodies with symmetric and asymmetric homogeneous glycans were prepared systematically, substantially expanding the scope of IgGs with homogeneous glycans. Using the prepared trastuzumab with homogeneous glycans, thermal stability and antibody-dependent cellular cytotoxicity were investigated. In some glycan series, a directly proportional relationship was observed between the thermal unfolding temperature (Tm) and the calorimetric unfolding heat (ΔHcal). Antibody function could be deduced from the combination of a pair of glycans in an intact form. Controlling glycan structure through the combination of a pair of glycans permits the precise tuning of stability and effector functions of IgG. Overall, our technology can be used to investigate the effects of glycans on antibody functions.

ELECTROCHEMICAL REDUCTION OF ELEMENTAL SULFUR IN ETHYLENE GLYCOL ELECTROLYTE

The work is devoted to the study of the mechanism of reduction of elemental sulfur from ethylene glycol. For this purpose, linear and cyclic voltampere polarization curves were recorded. The influence of sulfur concentration in ethylene glycol electrolyte, potential unfolding rate and temperature on the sulfur reduction process was investigated. By recording the cyclic polarization curve, the range of potentials at which the reduction of elemental sulfur and its anodic oxidation occur was determined. It has been established that an increase in the concentration of sulfur in the electrolyte and temperature raises the speed of its reduction, and the process itself is controlled by the diffusion of sulfur ions to the cathode surface. In addition, the polarization curves on the platinum rotating disc electrode were recorded. The obtained data, namely the rectilinear dependence of ip on the rotation speed of the electrode (ω) to the power of 0.5, confirm the proposal that the process of reduction of elemental sulfur is accompanied by diffusion polarization. The dependence of the current density on the rotation speed of the electrode to the power of 0.5 at different potentials showed that the process of reduction of elemental sulfur in non-aqueous ethylene glycol at potentials of (0.25÷0.4 V) is accompanied by diffusion polarization, whereas at potentials above 0.4 V, it is accompanied by electrochemical polarization. Keywords : Sulfur ions, electroreduction, polarization, scanrate.

Effects of bound nucleotides on the secondary structure, thermal stability, and phosphorylation of Rab3A

Rab3A is a member of the Rab GTPase family involved in synaptic vesicle trafficking. Recent evidence has demonstrated that Rab3A is phosphorylated by leucine-rich repeat kinase 2 (LRRK2) that is implicated in both familial and sporadic forms of Parkinson's disease (PD), and an abnormal increase in Rab3A phosphorylation has been proposed as a cause of PD. Despite the potential importance of Rab3A in PD pathogenesis, its structural information is limited and the effects of bound nucleotides on its biophysical and biochemical properties remain unclear. Here, we show that GDP-bound Rab3A is preferentially phosphorylated by LRRK2 compared with GTP-bound Rab3A. The secondary structure of Rab3A, measured by circular dichroism (CD) spectroscopy, revealed that Rab3A is resistant to heat-induced denaturation at pH 7.4 or 9.0 regardless of the nucleotides bound. In contrast, Rab3A underwent heat-induced denaturation at pH 5.0 at a lower temperature in its GDP-bound form than in its GTP-bound form. The unfolding temperature of Rab3A was studied by differential scanning fluorimetry, which showed a significantly higher unfolding temperature in GTP-bound Rab3A than in GDP-bound Rab3A, with the highest at pH 7.4. These results suggest that Rab3A has unusual thermal stability under physiologically relevant conditions and that bound nucleotides influence both thermal stability and phosphorylation by LRRK2.

Investigation of the structure of protein-polymer conjugates in solution reveals the impact of protein deuteration and the size of the polymer on its thermal stability.

The conjugation of proteins with polymers offers immense biotechnological potential by creating novel macromolecules. This article presents experimental findings on the structural properties of maltose-binding protein (MBP) conjugated with linear biodegradable polyphosphoester polymers with different molecular weights. We studied isotopic effects on both proteins and polymers. Circular dichroism and fluorescence spectroscopy and small-angle neutron scattering reveal that the conjugation process destabilizes the protein, affecting the secondary more than the tertiary structure, even at room temperature, and that the presence of two domains in the MBP may contribute to its observed instability. Notably, unfolding temperatures differ between native MBP and the conjugates. In particular, this study sheds light on the complex interplay of factors such as the deuteration influencing protein stability and conformational changes in the conjugation processes. The perdeuteration influences the hydrogen bond network and hydrophobic interactions in the case of the MBP protein. The perdeuteration of the protein influences the hydrogen bond network and hydrophobic interactions. This is evident in the decreased thermal stability of deuterated MBP protein, in the conjugate, especially with high-molecular-mass polymers.

H2 production under stress: [FeFe]‑hydrogenases reveal strong stability in high pressure environments

Hydrogenases are a diverse group of metalloenzymes that catalyze the conversion of H2 into protons and electrons and the reverse reaction. A subgroup is formed by the [FeFe]‑hydrogenases, which are the most efficient enzymes of microbes for catalytic H2 conversion. We have determined the stability and activity of two [FeFe]‑hydrogenases under high temperature and pressure conditions employing FTIR spectroscopy and the high-pressure stopped-flow methodology in combination with fast UV/Vis detection. Our data show high temperature stability and an increase in activity up to the unfolding temperatures of the enzymes. Remarkably, both enzymes reveal a very high pressure stability of their structure, even up to pressures of several kbars. Their high pressure-stability enables high enzymatic activity up to 2 kbar, which largely exceeds the pressure limit encountered by organisms in the deep sea and sub-seafloor on Earth.

Stability Increase of Phenolic Acid Decarboxylase by a Combination of Protein and Solvent Engineering Unlocks Applications at Elevated Temperatures.

Enzymatic decarboxylation of biobased hydroxycinnamic acids gives access to phenolic styrenes for adhesive production. Phenolic acid decarboxylases are proficient enzymes that have been applied in aqueous systems, organic solvents, biphasic systems, and deep eutectic solvents, which makes stability a key feature. Stabilization of the enzyme would increase the total turnover number and thus reduce the energy consumption and waste accumulation associated with biocatalyst production. In this study, we used ancestral sequence reconstruction to generate thermostable decarboxylases. Investigation of a set of 16 ancestors resulted in the identification of a variant with an unfolding temperature of 78.1 °C and a half-life time of 45 h at 60 °C. Crystal structures were determined for three selected ancestors. Structural attributes were calculated to fit different regression models for predicting the thermal stability of variants that have not yet been experimentally explored. The models rely on hydrophobic clusters, salt bridges, hydrogen bonds, and surface properties and can identify more stable proteins out of a pool of candidates. Further stabilization was achieved by the application of mixtures of natural deep eutectic solvents and buffers. Our approach is a straightforward option for enhancing the industrial application of the decarboxylation process.

Stabilization of G-Quadruplex Structures of the SARS-CoV-2 Genome by TMPyP4, BRACO19, and PhenDC3.

The G-quadruplex is one of the non-canonical structures formed by nucleic acids, which can be formed by guanine-rich sequences. They became the focus of much research when they were found in several oncogene promoter regions and also in the telomeres. Later on, they were discovered in viruses as well. Various ligands have been developed in order to stabilize DNA G-quadruplexes, which were believed to have an anti-cancer or antiviral effect. We investigated three of these ligands, and whether they can also affect the stability of the G-quadruplex-forming sequences of the RNA genome of SARS-CoV-2. All three investigated oligonucleotides showed the G-quadruplex form. We characterized their stability and measured their thermodynamic parameters using the Förster resonance energy transfer method. The addition of the ligands caused an increase in the unfolding temperature, but this effect was smaller compared to that found earlier in the case of G-quadruplexes of the hepatitis B virus, which has a DNA genome.

Dark nanodiscs for evaluating membrane protein thermostability by differential scanning fluorimetry

Measuring protein thermostability provides valuable information on the biophysical rules that govern the structure-energy relationships of proteins. However, such measurements remain a challenge for membrane proteins. Here, we introduce a new experimental system to evaluate membrane protein thermostability. This system leverages a recently developed nonfluorescent membrane scaffold protein to reconstitute proteins into nanodiscs and is coupled with a nano-format of differential scanning fluorimetry (nanoDSF). This approach offers a label-free and direct measurement of the intrinsic tryptophan fluorescence of the membrane protein as it unfolds in solution without signal interference from the “dark” nanodisc. In this work, we demonstrate the application of this method using the disulfide bond formation protein B (DsbB) as a test membrane protein. NanoDSF measurements of DsbB reconstituted in dark nanodiscs loaded with 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phosphorylglycerol (DMPG) lipids show a complex biphasic thermal unfolding pattern with a minor unfolding transition followed by a major transition. The inflection points of the thermal denaturation curve reveal two distinct unfolding midpoint melting temperatures (Tm) of 70.5°C and 77.5°C, consistent with a three-state unfolding model. Further, we show that the catalytically conserved disulfide bond between residues C41 and C130 drives the intermediate state of the unfolding pathway for DsbB in a DMPC and DMPG nanodisc. To extend the utility of this method, we evaluate and compare the thermostability of DsbB in different lipid environments. We introduce this method as a new tool that can be used to understand how compositionally and biophysically complex lipid environments drive membrane protein stability.

SAT669 Development And Biophysical Characterization Of A Humanized FSH-blocking Monoclonal Antibody Therapeutic Formulated At An Ultra-high Concentration

Abstract Disclosure: S. Rojekar: None. A.R. Pallapati: None. J. Gimenez–Roig: None. D. Sant: None. S. Gera: None. F. Korkmaz: None. F. Sultana: None. O. Barak: None. O. Moldavski: None. U. Cheliadinova: None. A. Gumerova: None. S. Miyashita: None. H.S. Kannangara: None. T. Frolinger: None. R. Witztum: None. A. Macdonald: None. P. Georgii: None. S.L. Sims: None. J.N. Caminis: None. M. Meseck: None. V. Ryu: None. S. Kim: None. D. Lizneva: None. T. Yuen: None. M. Zaidi: None. Highly concentrated antibody formulations are oftentimes required for subcutaneous, self-administered biologics. Here, we report the creation of a unique formulation for our first-in-class FSH-blocking humanized antibody, MS-Hu6, which we propose to move to the clinic for osteoporosis, obesity, and Alzheimer’s disease. The studies were carried out using our Good Laboratory Practice (GLP) platform, compliant with the Code of Federal Regulations (Title 21, Part 58). We first used protein thermal shift, size exclusion chromatography, and dynamic light scattering to examine MS-Hu6 concentrations between 1 and 100 mg/mL. We found that thermal, monomeric, and colloidal stability of formulated MS-Hu6 was maintained at a concentration of 100 mg/mL. The addition of the antioxidant L-methionine and chelating agent disodium EDTA improved the formulation's long-term colloidal and thermal stability. Thermal stability was further confirmed by Nano differential scanning calorimetry (DSC). Physiochemical properties of formulated MS-Hu6, including viscosity, turbidity, and clarity, conformed with acceptable industry standards. That the structural integrity of MS-Hu6 in formulation was maintained was proven through Circular Dichroism (CD) and Fourier Transform Infrared (FTIR) spectroscopy. Three rapid freeze-thaw cycles at −80°C/25°C or −80°C/37°C further revealed excellent thermal and colloidal stability. Furthermore, formulated MS-Hu6, particularly its Fab domain, displayed thermal and monomeric storage stability for more than 90 days at 4°C and 25°C. Finally, the unfolding temperature (Tm) for formulated MS-Hu6 increased by >4.80°C upon binding to recombinant FSH, indicating highly specific ligand binding. Overall, we document the feasibility of developing a stable, manufacturable and transportable MS-Hu6 formulation at a ultra-high concentration at industry standards. The study should become a resource for developing biologic formulations in academic medical centers. Presentation: Saturday, June 17, 2023

L-Arginine sulfate reduces irreversible protein binding in immobilized metal affinity chromatography

Immobilized metal affinity chromatography (IMAC) is a powerful technique for capture and purification of relevant biopharmaceuticals in complex biological matrices. However, protein recovery can be drastically compromised due to surface induced spreading and unfolding of the analyte, leading to fouling of the stationary phase. Here, we report on the kinetics of irreversible adsorption of a protease on an IMAC resin in a time span ranging from minutes to several hours. This trend correlated with the thermal data measured by nano differential scanning calorimetry, and showed a time-dependent change in protein unfolding temperature. Our results highlight that ‘soft’ proteins show a strong time dependent increase in irreversible adsorption. Furthermore, commonly used co-solvents for preservation of the native protein conformation are tested for their ability to reduce fouling. Thermal data suggests that the amino acid l-arginine is beneficial in preventing unfolding, which was confirmed in batch adsorption experiments. The choice of counter-ions has to be considered when using this amino acid. These results show that l-arginine sulfate decelerates the irreversible adsorption kinetics of proteins on the IMAC stationary phase to a greater extent than l-arginine chloride.

Highly protein-loaded melt extrudates produced by small-scale ram and twin-screw extrusion - evaluation of extrusion process design on protein stability by experimental and numerical approaches

Understanding of generation, extent and location of thermomechanical stress in small-scale (< 3 g) ram and twin-screw melt-extrusion is crucial for mechanistic correlations to the stability of protein particles (lysozyme and BSA) in PEG-matrices. The aim of the study was to apply and correlate experimental and numerical approaches (1D and 3D) for the evaluation of extrusion process design on protein stability. The simulation of thermomechanical stress during extrusion raised the expectation of protein degradation and protein particle grinding during extrusion, especially when TSE was used. This was confirmed by experimental data on protein stability. Ram extrusion had the lowest impact on protein unfolding temperatures, whereas TSE showed significantly reduced unfolding temperatures, especially in combination with kneading elements containing screws. In TSE, the mechanical stress in the screws always exceeded the shear stress in the die, while mechanical stress within ram extrusion was generated in the die, only. As both extruder designs revealed homogeneously distributed protein particles over the cross section of the extrudates for all protein-loads (20–60%), the dispersive power of TSE revealed not to be decisive. Consequently, the ram extruder would be favored for the production of stable protein-loaded extrudates in small scale.

Development and biophysical characterization of a humanized FSH-blocking monoclonal antibody therapeutic formulated at an ultra-high concentration.

Highly concentrated antibody formulations are oftentimes required for subcutaneous, self-administered biologics. Here, we report the development of a unique formulation for our first-in-class FSH-blocking humanized antibody, MS-Hu6, which we propose to move to the clinic for osteoporosis, obesity, and Alzheimer's disease. The studies were carried out using our Good Laboratory Practice (GLP) platform, compliant with the Code of Federal Regulations (Title 21, Part 58). We first used protein thermal shift, size exclusion chromatography, and dynamic light scattering to examine MS-Hu6 concentrations between 1 and 100 mg/mL. We found that thermal, monomeric, and colloidal stability of formulated MS-Hu6 was maintained at a concentration of 100 mg/mL. The addition of the antioxidant L-methionine and chelating agent disodium EDTA improved the formulation's long-term colloidal and thermal stability. Thermal stability was further confirmed by Nano differential scanning calorimetry (DSC). Physiochemical properties of formulated MS-Hu6, including viscosity, turbidity, and clarity, conformed with acceptable industry standards. That the structural integrity of MS-Hu6 in formulation was maintained was proven through Circular Dichroism (CD) and Fourier Transform Infrared (FTIR) spectroscopy. Three rapid freeze-thaw cycles at -80°C/25°C or -80°C/37°C further revealed excellent thermal and colloidal stability. Furthermore, formulated MS-Hu6, particularly its Fab domain, displayed thermal and monomeric storage stability for more than 90 days at 4°C and 25°C. Finally, the unfolding temperature (Tm) for formulated MS-Hu6 increased by >4.80°C upon binding to recombinant FSH, indicating highly specific ligand binding. Overall, we document the feasibility of developing a stable, manufacturable and transportable MS-Hu6 formulation at a ultra-high concentration at industry standards. The study should become a resource for developing biologic formulations in academic medical centers.

Effect of pH on the secondary structure and thermostability of beetle luciferases: structural origin of pH-insensitivity.

Beetle luciferases were classified into three functional groups: (1) pH-sensitive yellow-green-emitting (fireflies) which change the bioluminescence color to red at acidic pH, high temperatures and presence of heavy metals; (2) the pH-insensitive green-yellow-emitting (click beetles, railroad worms and firefly isozymes) which are not affected by these factors, and (3) pH-insensitive red-emitting. Although the pH-sensing site in firefly luciferases was recently identified, it is unclear why some luciferases are pH-insensitive despite the presence of someconserved pH-sensing residues. Through circular dichroism, we compared the secondary structural changes and unfolding temperature of luciferases of representatives ofthese three groups: (1) pH-sensitive green-yellow-emitting Macrolampis sp2 (Mac) and Amydetes vivianii (Amy) firefly luciferases; (2) the pH-insensitive green-emitting Pyrearinus termitilluminans larval click beetle (Pte) and Aspisoma lineatum (Al2) larval firefly luciferases, and (3) the pH-insensitive red-emitting Phrixotrix hirtus railroadworm (PxRE) luciferase. The most blue-shifted luciferases, independently of pH sensitivity, are thermally more stable at different pHs than the red-shifted ones. The pH-sensitive luciferases undergo increases of α-helices and thermal stability above pH 6. The pH-insensitive Pte luciferase secondary structure remains stable between pH 6 and 8, whereas the Al2 luciferase displays an increase of the β-sheet at pH 8. The PxRE luciferase also displays an increase of α-helices at pH 8. The results indicate that green-yellow emission in beetle luciferases can be attained by: (1) a structurally rigid scaffold which stabilizes a single closed active site conformation in the pH-insensitive luciferases, and (2) active site compaction above pH 7.0 in the more flexible pH-sensitive luciferases.

Thermodynamic Signatures of Blood Plasma Proteome in Neurodegenerative Pathologies

Discovery of diagnostic biomarkers for age-related neurodegenerative pathologies (NDDs) is essential for accurate diagnosis, following disease progression and drug development. Blood plasma and blood cells are important peripheral sources for NDDs' biomarkers that, although present in lower concentrations than in cerebrospinal fluid, would allow noninvasive diagnostics. To identify new biomarkers for Parkinson's disease (PD) and amyotrophic lateral sclerosis (ALS), in this work we have evaluated the modifications in the thermodynamic behavior of blood plasma proteome exploring differential scanning calorimetry. The plasma thermodynamics reflected the complexity and heterogeneity of the two pathologies. The unfolding temperature of the most abundant plasma protein albumin and the weighted average center of the calorimetric profile appeared as the two thermodynamic signatures that reflected modifications of the plasma proteome, i.e., strong thermal stabilization of albumin and plasma proteins' interaction network, related to both pathologies. Based on those two signatures, both PD and ALS patients were stratified in two sets, except several cases with thermodynamic parameters that strongly differed from those of the calorimetric sets. Along with modifications of the plasma thermodynamic behavior, we found altered globulin levels in all PD and ALS patients' plasma (higher level of α- and β-globulin fractions and lower level of γ-globulin fraction than the respective reference values) employing capillary electrophoresis. The presented results reveal the potential of calorimetry to indirectly identify NDDs' biomarkers in blood plasma.

Exploring the role of preferential solvation in the stability of globular proteins through the study of ovalbumin interaction with organic additives

&lt;abstract&gt; &lt;p&gt;The impact of denaturing and stabilizing osmolytes on protein conformational dynamics has been extensively explored due to the significant contribution of protein solvation to the stability, function, malfunction and regulation of globular proteins. We studied the effect of two nonspecific organic molecules, urea, which is a conventional denaturant, and dimethyl sulfoxide (DMSO), which is a multilateral organic solvent, on the stability and conformational dynamics of a non-inhibitory serpin, ovalbumin (OVA). A differential scanning microcalorimetry (DSC) experimental series conducted in the phosphate buffer solutions containing 0–30% of additives revealed the destabilizing impact of both urea and DMSO in a mild acidic media, manifested in the gradual decrease of thermal unfolding enthalpy and transition temperature. These findings differ from the results observed in our study of the mild alkaline DMSO buffered solutions of OVA, where the moderate stabilization of OVA was observed in presence of 5–10% of DMSO. However, the overall OVA interaction patterns with urea and DMSO are consistent with our previous findings on the stability and conformational flexibility of another model globular protein, α-chymotrypsin, in similar medium conditions. The obtained results could be explained by preferential solvation patterns. Positive preferential solvation of protein by urea in urea/water mixtures mainly weakens the hydrophobic interactions of the protein globule and eventually leads to the disruption of the tertiary structure within the whole range of urea concentrations. Alternatively, under certain experimental conditions in DMSO/water mixtures, positive preferential solvation by water molecules can be observed. We assume that the switch to the positive preferential solvation by DMSO, which is shown to have a soft maximum around 20–30% DMSO, could be shifted towards lower additive concentrations due to the intrinsic capability of ovalbumin OVA to convert into a heat-stable, yet flexible set of conformations that have increased the surface hydrophobicity, characteristic to molten-globule-like states.&lt;/p&gt; &lt;/abstract&gt;

Effects of Salts and Surface Charge on the Biophysical Stability of a Low pI Monoclonal Antibody

The impact of five representative Hofmeister salts (NaCl, KCl, MgCl2, Na2SO4, and NaSCN) on the thermal stability and aggregation kinetics of a slightly acidic monoclonal antibody (mAb) were investigated under different pH conditions. The thermal stability of the mAb was assessed by measuring the lowest unfolding transition temperature, Tm, with differential scanning fluorimetry. MgCl2 and NaSCN significantly decreased Tm at all three charged states of the mAb, but to the greatest extent when the mAb surface charge was net positive. Non-native aggregation kinetics was monitored by measuring Rayleigh light scattering. When the mAb surface charge was net positive or net neutral, the nucleation rate increased non-monotonically with MgCl2 and NaSCN but decreased monotonically with NaCl, KCl, and Na2SO4. By contrast, when the mAb surface was negatively charged, there were only minor changes in the nucleation rate with all salts tested. Furthermore, there was less structural perturbation and slower aggregation rates when the mAb was net negatively charged than when it was net neutrally or positively charged. The observed salt effects on thermal unfolding are consistent with ion-specific mechanisms dominated by short-range amide backbone binding. On the other hand, the salt effects on nucleation rates appear to be influenced by both amide backbone binding and long-range electrostatic binding of ions to charged amino acid side chains.

Enhanced Substrate Specificity of Thermostable Cytochrome P450 CYP175A1 by Site Saturation Mutation on Tyrosine 68.

Thermostable cytochrome P450 (CYP175A1) cloned from Thermus thermophilus shows mid-point unfolding temperature (Tm) of 88°C (361K) along with high thermodynamic stability making it a potential industrially viable biocatalyst. Molecular docking analyses, and structural superposition with steroidogenic and fatty acid metabolizing cytochrome P450 s suggested that the tyrosine 68 may have important role in binding as well as metabolism of substrates by the enzyme. Site-saturation mutation of the tyrosine 68 residue was carried out and several unique mutations were obtained that were properly folded and showed high thermostability. We investigated the effects of variation of the single residue, Tyr68 at the substrate binding pocket of the enzyme on the substrate specificity of CYP175A1. Screening of the mutant colonies of CYP175A1 obtained after saturation mutagenesis of Tyr68 using saturated fatty acid, myristic acid and poly unsaturated fatty acids showed that the Y68K had notable binding and catalytic activity for mono-oxygenation of the saturated fatty acid (myristic acid), which had no major detectable binding affinity towards the WT enzyme. The Y68R mutant of CYP175A1, on the other hand was found to selectively bind and catalyse reaction of cholesterol. The wild type as well as both the mutants of the enzyme however bind poly unsaturated fatty acids. The results thus show that saturation mutation of a single amino acid at the substrate binding pocket of the thermostable cytochrome P450 could induce sufficient changes in the substrate binding pocket of the enzyme that can efficiently change substrate specificity of the enzyme.

Stabilizing proteins, simplified: A Rosetta-based webtool for predicting favorable mutations.

Many proteins have low thermodynamic stability, which can lead to low expression yields and limit functionality in research, industrial and clinical settings. This article introduces two, web-based tools that use the high-resolution structure of a protein along with the Rosetta molecular modeling program to predict stabilizing mutations. The protocols were recently applied to three genetically and structurally distinct proteins and successfully predicted mutations that improved thermal stability and/or protein yield. In all three cases, combining the stabilizing mutations raised the protein unfolding temperatures by more than 20°C. The first protocol evaluates point mutations and can generate a site saturation mutagenesis heatmap. The second identifies mutation clusters around user-defined positions. Both applications only require a protein structure and are particularly valuable when a deep multiple sequence alignment is not available. These tools were created to simplify protein engineering and enable research that would otherwise be infeasible due to poor expression and stability of the native molecule.

Loss of Protein Stability and Function Caused by P228L Variation in NADPH-Cytochrome P450 Reductase Linked to Lower Testosterone Levels.

Cytochrome P450 oxidoreductase (POR) is the redox partner of steroid and drug-metabolising cytochromes P450 located in the endoplasmic reticulum. Mutations in POR cause a broad range of metabolic disorders. The POR variant rs17853284 (P228L), identified by genome sequencing, has been linked to lower testosterone levels and reduced P450 activities. We expressed the POR wild type and the P228L variant in bacteria, purified the proteins, and performed protein stability and catalytic functional studies. Variant P228L affected the stability of the protein as evidenced by lower unfolding temperatures and higher sensitivity to urea denaturation. A significant decline in the rate of electron transfer to cytochrome c and thiazolyl blue tetrazolium (MTT) was observed with POR P228L, while activities of CYP3A4 were reduced by 25% and activities of CYP3A5 and CYP2C9 were reduced by more than 40% compared with WT POR. The 17,20 lyase activity of CYP17A1, responsible for the production of the main androgen precursor dehydroepiandrosterone, was reduced to 27% of WT in the presence of the P228L variant of POR. Based on in silico and in vitro studies, we predict that the change of proline to leucine may change the rigidity of the protein, causing conformational changes in POR, leading to altered electron transfer to redox partners. A single amino acid change can affect protein stability and cause a severe reduction in POR activity. Molecular characterisation of individual POR mutations is crucial for a better understanding of the impact on different redox partners of POR.