UV Absorption Research Articles

Biodegradability of unheated and laboratory heated dissolved organic matter.

Following wildfires, partially combusted biomass remains on the forest floor and erosion from the landscape can release dissolved pyrogenic organic matter (dPyOM) to surface waters. Therefore, post-fire alterations to dissolved organic matter (DOM) in aquatic systems may play a vital role in DOM stability and biogeochemical cycles. Dissolved PyOM biodegradation remains poorly understood and is expected to vary with combustion temperature and fuel source. In this study laboratory heating and leaching of forest floor materials (soil and litter) were used to compare the biodegradability of unheated, low (250 °C), and moderate (450 °C) temperature leachates. Inoculation experiments were performed with river microbes. Dissolved organic carbon (DOC) and nitrogen (DON), inorganic nitrogen, and DOM optical properties were monitored for 38 days. Inoculation experiments showed significantly greater DOC biodegradation of low and moderate temperature samples (64% and 71%, respectively) compared to unheated samples (32%). The greater DOC biodegradation may be explained by lower molecular weight DOM composition of heated leachates which was supported by higher initial E2/E3 ratios (absorbance at 250 nm/365 nm). Further, the observed decrease in the E2/E3 ratio after incubation suggests biodegradation of smaller compounds. This trend was greater for heated samples than unheated DOM. Specific ultraviolet absorbance increased after incubation, suggesting biodegradation of aliphatic compounds. Inoculated moderate temperature samples showed the greatest DON degradation (74%), followed by low temperature (58%) and unheated (51%) samples. Overall, results suggest that low and moderate temperature dPyOM was more biodegradable than unheated DOM, which may have implications for aquatic biogeochemical cycling, ecosystem function, and water quality in fire-impacted watersheds.

Enhancement of in situ detection and imaging of phytohormones in plant tissues by MALDI-MSI using 2,4-dihydroxy-5-nitrobenzoic acid as a novel matrix.

Phytohormones possess unique chemical structures, and their physiological effects are regulated through intricate interactions or crosstalk among multiple phytohormones. MALDI-MSI enables the simultaneous detection and imaging of multiple hormones. However, its application for tracing phytohormones is currently restricted by low abundance of hormone in plant and suboptimal matrix selection. 2,4-Dihydroxy-5-nitrobenzoic acid (DHNBA) was reported as a new MALDI matrix for the enhanced detection and imaging of multiple phytohormones in plant tissues. DHNBA demonstrates remarkable sensitivity improvement when compared to the commonly used matrix, 2,5-dihydroxybenzoic acid (DHB), in the detection of isoprenoid cytokinins (trans-zeatin (tZ), dihy-drozeatin (DHZ), meta-topolin (mT), and N6-(Δ2-isopentenyl) adenine (iP)), jasmonic acid (JA), abscisic acid (ABA), and 1-aminocyclo-propane-1-carboxylic acid (ACC) standards. The distinctive properties of DHNBA (i.e. robust UV absorption, uniform matrix deposition, negligible background interference, and high ionization efficiency of phytohormones) make it as an ideal matrix for enhanced detection and imaging of phytohormones, including tZ, DHZ, ABA, indole-3-acetic acid (IAA), and ACC, by MALDI-MSI in various plant tissues, for example germinating seeds, primary/lateral roots, and nodules. Employing DHNBA significantly enhances our capability to concurrently track complex phytohormone biosynthesis pathways while providing precise differentiation of the specific roles played by individual phytohormones within the same category. This will propel forward the comprehensive exploration of phytohormonal functions in plant science.

High Strength UV-Resistant Composite Film of Fe3+-Coordination Lignin/PVA.

The literature on polyvinyl alcohol (PVA) films is extensive, however, these methods often necessitate intricate synthesis processes or the addition of plasticizers to modify the strength and water solubility of the PVA material. A high-strength UV radiation-resistant composite film by chelating Fe3+ with lignin and PVA, which exhibits excellent hydrolysis resistance is developed. This composite film is prepared simply by incorporating a small amount of dealkalized lignin (APPL) and ferric chloride (FeCl3) into PVA through a straightforward composite process. During the scanning test, it is noted that the film exhibits a high density of uniformly dispersed particles, endowing it with efficient ultraviolet absorption capabilities. The infrared and anti-dissolution tests reveal that the coordination of Fe3+ with lignin imparts an outstanding hydrolysis resistance to the film, obviating the need for any extender, curing agent, acid or base. The tensile fracture strength reaches an impressive 187.81Mpa in the tensile test. UV and indicator card tests unequivocally demonstrate that the film achieves a remarkable 100% anti-UV efficiency. This Fe3+ chelated lignin/PVA composite film, with its facile preparation, environmental sustainability, high strength, and outstanding anti-ultraviolet efficiency, can be deployed across diverse applications requiring robust protection against ultraviolet radiation.

A comparative study of in vivo toxicity in zebrafish embryos synthesized CuO nanoparticles characterized from Salacia reticulata.

The Salacia reticulata, a medicinal woody climbing shrub, was utilized for our study, the green synthesis of CuO nanoparticles, which were analyzed through SEM, EDX, FTIR, XRD, and UV‒Vis spectroscopy. This study assessed the toxicity to zebrafish embryos and explored the antibacterial, cytotoxic, antidiabetic, and anti-inflammatory properties of the synthesized nanoparticles. In results, the UV absorption of the CuO NPs showed that the intensity of nanoparticle green colloidal suspension changed from blue to green, which also confirmed that the spectrum of the green CuO NPs changed from colorless to black. in FT-IR and XRD spectral analysis to identify functional groups and determine the particle size of CuO NPs prepared by green and chemical methods. Its showed that CuO NPs (green) had a size of approximately 42.2nm, while CuO NPs (chemical) had a size of approximately 84nm. The morphology of these NPs was analyzed using SEM-EDX. Compared with their chemically prepared counterparts, the green-synthesized CuO nanoparticles demonstrated superior dispersion. Additionally, both green and chemical CuO nanoparticles at a concentration of 200 µL/mL caused developmental anomalies and increased mortality in zebrafish embryos and larvae. The green and chemical CuO NPs inhibited α-glucosidase enzyme activity at concentrations between 10 and 50 µL/mL, with IC50 values of 22 µL/mL and 26 µL/mL, respectively. The extract exhibited anti-inflammatory activity, with IC50 values of 274 and 109 µL/mL. The authors concluded that this green nanoparticle method has potential as a more eco-friendly and cost-effective alternative to traditional synthetic methods. NPs are widely used in human contact fields (medicine and agriculture), hence synthesis methods that do not involve toxic substances are becoming increasingly important.

Resetting tropospheric OH and CH4 lifetime with ultraviolet H2O absorption.

The decay of methyl chloroform, a banned ozone-depleting substance, has provided a clear observational metric of mean tropospheric hydroxyl radical (OH) abundance. Almost all current global chemistry models calculate about 15% too much OH and thus too rapid methane loss. Methane is a short-lived climate forcer, critical to achieving global warming targets, and this error affects our model projections of climate change. New observations of water vapor absorption in the ultraviolet region (290 to 350 nanometers) imply reductions in sunlight with key photolysis rates decreasing by 8 to 12% in the near-surface tropical atmosphere. Incorporation of this new mechanism in a chemistry-transport model reduces OH and methane loss by only 4%, but combined with other proposed mechanisms, such as tropospheric halogen chemistry (7%), we may be able to resolve this conundrum.

Core Hole Effect to Valence Excitations: Tracking and Visualizing the Same Excitation in XPS Shake-Up Satellites and UV Absorption Spectra.

Introducing a core hole significantly alters the electronic structure of a molecule, and various X-ray spectroscopy techniques are available for probing the valence electronic structure in the presence of a core hole. In this study, we visually demonstrate the influence of a core hole on valence excitations by computing the ultraviolet absorption spectra and the shake-up satellites in X-ray photoelectron spectra for pyrrole, furan, and thiophene, as complemented by the natural transition orbital (NTO) analysis over transitions with and without a core hole. Employing equivalent core hole time-dependent density functional theory (ECH-TDDFT) and TDDFT methods, we achieved balanced accuracy in both spectra for reliable comparative analysis. We tracked the same involved valence transition in both spectra, offering a vivid illustration of the core hole effect via the change in corresponding particle NTOs introduced by a 1s core hole on a Cα, Cβ, or O atom. Our analysis deepens the understanding of the core hole effect on valence transitions, a phenomenon ubiquitously observed in general X-ray spectroscopic analyses.

The Gas Phase Protonation Sites of Six Naturally Occurring Nicotinoids.

The gas phase protonation sites of six naturally occurring nicotinoids, namely nicotine (NIC), nornicotine (NOR), anabasine (ANB), anatabine (ANT), cotinine (COT), and myosmine (MYO), consisting of a common Pyridine and differing non-Pyridine rings, have been determined for the first time at the physiological temperature from cryogenic ion trap infrared spectroscopy and electronic structure calculations. The protonation site on either of these two rings is related to the nicotinoid's biological activity. At room temperature, NIC is a mixture of Pyridine and Pyrrolidine (non-Pyridine) protomers, whereas NOR, ANB, ANT, and COT are pure Pyridine protomers and finally MYO is mostly a Pyroline (non-Pyridine) protomer. The nearly planar structure of MYO-H+, induced by the presence of a conjugated π system and confirmed from calculations and the UV absorption spectra, breaks from the trends observed for NIC, NOR, and ANB, since its structure is drastically different from the structures of the other nicotinoids.

Sequence-Dependent Surface Coverage of ssDNA Coatings on Single-Wall Carbon Nanotubes.

A combination of experimental measurements and molecular dynamics (MD) simulations was used to investigate how the surfaces of single-wall carbon nanotubes (SWCNTs) are covered by adsorbed ssDNA oligos with different base compositions and lengths. By analyzing the UV absorption spectra of ssDNA-coated SWCNTs before and after coating displacement by a transparent surfactant, the mass ratios of adsorbed ssDNA to SWCNTs were determined for poly-T, poly-C, GT-containing, and AT-containing ssDNA oligos. Based on the measured mass ratios, it is estimated that an average of 20, 22, 26, or 32 carbon atoms are covered by one adsorbed thymine, cytosine, adenine, or guanine nucleotide, respectively. In addition, the UV spectra revealed electronic interactions of varying strengths between the nucleobase aromatic rings and the nanotube π-systems. Short poly-T DNA oligos show stronger π-π stacking interactions with SWCNT surfaces than do short poly-C DNA oligos, whereas both long poly-C and poly-T DNA oligos show strong interactions. These experiments were complemented by MD computations on simulated systems that were constrained to match the measured ssDNA/SWCNT mass ratios. The surface coverages computed from the MD results varied with oligo composition in a pattern that correlates higher measured yields of nanotube fluorescence with greater surface coverage.

Sequence-Dependent Surface Coverage of ssDNA Coatings on Single-Wall Carbon Nanotubes.

A combination of experimental measurements and molecular dynamics (MD) simulations was used to investigate how the surfaces of single-wall carbon nanotubes (SWCNTs) are covered by adsorbed ssDNA oligos with different base compositions and lengths. By analyzing the UV absorption spectra of ssDNA-coated SWCNTs before and after coating displacement by a transparent surfactant, the mass ratios of adsorbed ssDNA to SWCNTs were determined for poly-T, poly-C, GT-containing, and AT-containing ssDNA oligos. Based on the measured mass ratios, it is estimated that an average of 20, 22, 26, or 32 carbon atoms are covered by one adsorbed thymine, cytosine, adenine, or guanine nucleotide, respectively. In addition, the UV spectra revealed electronic interactions of varying strengths between the nucleobase aromatic rings and the nanotube π-systems. Short poly-T DNA oligos show stronger π-π stacking interactions with SWCNT surfaces than do short poly-C DNA oligos, whereas both long poly-C and poly-T DNA oligos show strong interactions. These experiments were complemented by MD computations on simulated systems that were constrained to match the measured ssDNA/SWCNT mass ratios. The surface coverages computed from the MD results varied with oligo composition in a pattern that correlates higher measured yields of nanotube fluorescence with greater surface coverage.

Smartphone assisted paper strip-based colorimetric sensing of phosphate and copper ions utilizing bi-ligand intercalated cobalt-MOF as a dual functional nanozyme

Monitoring phosphate and copper ions is vital for environmental and food safety due to associated health risks. To address this need, a new cobalt and bi-organic ligand based metal organic framework (BDC-Co-BIm MOF) has been developed. This MOF acts as a dual-function nanozyme, displaying peroxidase-like activity and selective detection abilities for PO43- ion. The Co(II) nodes and sp2 carbon within the framework exhibit excellent Fenton-like reaction, efficiently catalyzing the conversion of 3,3′,5,5′-tetramethylbenzidine (TMB) into oxidised TMB (oxTMB). Also, steady-state kinetic analysis indicated that BDC-Co-BIm MOF exhibited high affinity toward both TMB and H2O2. The Co(II) nodes and positive charge of the BDC-Co-BIm MOF capture PO43- ion through Co-O-P bonding and electrostatic interaction, limiting the electron transfer between BDC-Co-BIm MOF and H2O2. This reduces TMB oxidation and changes the color from blue to colorless. When ionic Cu2+ ion are added to the system, they react with PO43- ion to form a stable Cu3(PO4)2 complex. This reactivates the electron transfer process, allowing the H2O2 to decompose into •OH. As a result, TMB oxidation is restored and producing the blue color product again. Based on these principles, a colorimetric assay has been developed for the rapid and selective detection of PO43- and Cu2+ ions. A strong linear correlation has been established between their concentrations and the UV absorbance at 652 nm, with limit of detection (LOD) of PO43- and Cu2+ was 0.05 and 0.13 µM, respectively. These limits are notably lower than the thresholds established by the Environmental Protection Agency and World Health Organization (EPA & WHO) at 0.18 µM for PO43- and 30 µM for Cu2+. A Paper-based smartphone-assisted sensing of PO43- and Cu2+ ions was successfully achieved using intelligent Red, Green, and Blue (RGB) analysis. The platform showed high selectivity and performance with environmental water samples. This research presents a novel method for visually detecting PO43- and Cu2+ ions using versatile nanozyme, advancing portable on-site environmental safety analysis.

Computer-aided drug design supporting sunscreen research: a showcase study using previously synthesized hybrid UV filter-antioxidant compounds.

Although quantum mechanical calculations have proven effective in accurately predicting UV absorption and assessing the antioxidant potential of compounds, the utilization of computer-aided drug design (CADD) to support sustainable synthesis research of new sunscreen active ingredients remains an area with limited exploration. Furthermore, there are ongoing concerns about the safety and effectiveness of existing sunscreens. Therefore, it remains crucial to investigate photoprotection mechanisms and develop enhanced strategies for mitigating the harmful effects of UVR exposure, improving both the safety and efficacy of sunscreen products. A previous study conducted synthesis research on eight novel hybrid compounds (I-VIII) for use in sunscreen products by molecular hybridization of trans-resveratrol (RESV), avobenzone (AVO), and octinoxate (OMC). Herein, time-dependent density functional theory (TD-DFT) calculations performed in the gas phase on the isolated hybrid compounds (I-VIII) proved to reproduce the experimental UV absorption. Resveratrol-avobenzone structure-based hybrids (I-IV) present absorption maxima in the UVB range with slight differences between them, while resveratrol-OMC structure-based hybrids (V-VIII) showed main absorption in the UVA range. Among RESV-OMC hybrids, compounds V and VI exhibited higher UV absorption intensity, and compound VIII stood out for its broad-spectrum coverage in our simulations. Furthermore, both in silico and in vitro analyses revealed that compounds VII and VIII exhibited the highest antioxidant activity, with compound I emerging as the most reactive antioxidant within RESV-AVO hybrids. The study suggests a preference for the hydrogen atom transfer (HAT) mechanism over single-electron transfer followed by proton transfer (SET-PT) in the gas phase. With a strong focus on sustainability, this approach reduces costs and minimizes effluent production in synthesis research, promoting the eco-friendly development of new sunscreen active ingredients. The SPARTAN'20 program was utilized for the geometry optimization and energy calculations of all compounds. Conformer distribution analysis was performed using the Merck molecular force field 94 (MMFF94), and geometry optimization was carried out using the parametric method 6 (PM6) followed by density functional theory (DFT/B3LYP/6-31G(d)). The antioxidant behavior of the hybrid compounds (I-VIII) was determined using the highest occupied molecular orbital (εHOMO) and the lowest unoccupied molecular orbital (εLUMO) energies, as well as the bond dissociation enthalpy (BDE), ionization potential (IP), and proton dissociation enthalpy (PDE) values, all calculated at the same level of structural optimization. TD-DFT study is carried out to calculate the excitation energy using the B3LYP functional with the 6-31G(d) basis set. The calculated transitions were convoluted with a Gaussian profile using the Gabedit program.

Production of microcapsules by Maillard reaction of soy protein isolate and sodium carboxymethyl cellulose for protection of bifidobacterium lactis

Soy protein isolate (SPI) and sodium carboxymethyl cellulose (CMC-Na) were combined in varying proportions and subjected to the Maillard reaction through spray drying and dry-heat methods. The effects of different mixing ratios and reaction times on the physicochemical properties of the reaction products were investigated, with a focus on their application as wall material for bifidobacterium lactis BB-12. The solubility of the system was significantly enhanced by the Maillard reaction, reaching its maximum at an SPI:CMC-Na ratio of 1:2. At this proportion, after a 6-hour dry-heat Maillard reaction, there was a significant increase in ultraviolet absorption and browning degree of the product, while the free amino acid content decreased significantly. Fluorescence spectroscopy revealed that the conformation around tryptophan residues remained in its natural form, whereas circular dichroism spectroscopy showed a decrease in α-helix and Random coil structure content upon addition of CMC-Na, accompanied by an increase in β-sheet and β-turn content. This stretching effect on protein molecules facilitated functional property expression. Compared to unencapsulated probiotics BB-12 microcapsules prepared using secondary spray drying with a wall-core volume ratio of 6:1 exhibited higher encapsulation efficiency along with good storage stability, tolerance to gastrointestinal conditions, and heat stability. These findings have practical implications for preserving bioactive substances in the food industry.

Interaction mechanism of oseltamivir phosphate with bovine serum albumin: multispectroscopic and molecular docking study

Oseltamivir phosphate (OP) is an antiviral drug with potential risks to human health due to overuse, leading to serious consequences such as gastrointestinal disturbances, abnormal neuropsychiatric symptoms, and sudden death. Therefore, gaining an in-depth understanding of its interaction with proteins is crucial. We investigated the interaction between OP and bovine serum albumin (BSA) utilizing multispectral methods (i.e., fluorescence, ultraviolet absorption, circular dichroism) combined with molecular docking techniques. Fluorescence spectroscopy indicated that OP quenched BSA fluorescence by forming the OP-BSA complex. The Stern-Volmer constants (KSV) between OP and BSA were determined to be 3.06 × 103 L/mol, 2.36 × 103 L/mol, and 1.86 × 103 L/mol at 293 K, 298 K, and 303 K, respectively. OP occupies exclusively one binding site on BSA, and the fluorescent probe displacement measurements revealed that this is BSA site I. Thermodynamic data (∆H, ∆S, and ∆G) obtained by fitting the van’t Hoff equation were − 77.49 kJ/mol, -176.54 J/(mol∙K), and − 24.88 kJ/mol, respectively, suggesting that hydrogen bonding and van der Waals forces mainly participate in OP-BSA complex stabilization. Moreover, the reaction occurs spontaneously at room temperature. Synchronous fluorescence spectra indicated that OP interacts with tryptophan residue of BSA. The results of ultraviolet (UV) and 3D fluorescence spectroscopy indicated that the OP-BSA complex formation altered the microenvironment around amino acid residues. Circular dichroism spectra revealed that the addition of OP decreased the α-helix content of BSA by 7.13%. Docking analysis confirmed that OP binds to BSA site I through hydrogen bonding with amino acids VAL342, SER453, and ASP450. Finally, ADMET studies were conducted to explore the pharmacokinetics of OP as an antiviral drug.

Diisopropylammonium hydrogen squarate: Synthesis and comprehensive analysis of non-linear optical co-crystal using X-ray, Hirshfeld, mechanical, optical and DFT methods

This research successfully synthesized a single co-crystal of diisopropylammonium hydrogen squarate using prolonged vaporization for crystal growth. Single-crystal X-ray spectrometry confirmed its monoclinic structure, and morphological predictions were made. UV–visible spectroscopy revealed its optical transmittance with a direct optical energy band gap of 3.45 eV. Photoluminescence studies showed a strong violet emission at 402 nm when excited by a 260 nm source. Microhardness study examined the crystal's mechanical attributes portraying the normal indentation size effect followed by a qualitative overview of half-penny crack dynamics. FTIR study aided in the discernment of varied vibrational modes with NH stretching being observed at 3078 cm−1. Thermal examination further revealed the crystal's stability up till 244 °C. Proton and carbon-13 NMR spectra were analyzed to verify the presence of functional groups and the overall molecular integrity. Intermolecular interactions were analyzed using Hirshfeld surface and fingerprint mapping. The Z-scan technique demonstrated the crystal's applicative potential in its third harmonic generation capability. Theoretical calculations with Density Functional Theory (DFT) supported the experimental findings, offering insights into optimized geometries, frontier molecular orbitals, natural population and bond orbital distributions, hyperpolarizability, molecular electrostatic potentials, IR vibrational modes, and UV absorbance profiles.

Diagnosis of Bactericidal Components of Air-Plasma Jets by IR and UV Absorption Spectroscopy**

Diagnosis of Bactericidal Components of Air-Plasma Jets by IR and UV Absorption Spectroscopy**

Facile Lignin Extraction and Application as Natural UV Blockers in Cosmetic Formulations

Natural compounds are becoming increasingly popular in the fields of pharmaceuticals and cosmetics. One such compound is lignin, a plant-derived aromatic polymer that serves as a natural anti-ultraviolet agent. Conventional methods for extracting lignin from plant materials typically involve performing procedures in harsh environments, such as dissolving it in highly alkaline solutions or subjecting it to treatment in acidic conditions. In this study, lignin was extracted from coconut husk under milder conditions, using neutral solvents and ultrasonic treatment, which allowed us to obtain lignin with significantly improved properties. The developed method facilitated the creation of light-colored lignin, which was employed as a natural ingredient in sunblock cream. Furthermore, for the sake of comparison, lignin was extracted under more rigorous conditions using the traditional method. The research findings confirm that the light-colored lignin sample exhibits a higher level of UV absorption. Furthermore, light-colored lignin demonstrates a synergistic effect when combined with commercial moisturizing creams and sunscreens, leading to a significant enhancement in their SPF performance against both UVA and direct sunlight exposure. This study highlights the potential value of incorporating lignin as a valuable natural ingredient in sunblock and cosmetic products.

Facile Lignin Extraction and Application as Natural UV Blockers in Cosmetic Formulations

Natural compounds are becoming increasingly popular in the fields of pharmaceuticals and cosmetics. One such compound is lignin, a plant-derived aromatic polymer that serves as a natural anti-ultraviolet agent. Conventional methods for extracting lignin from plant materials typically involve performing procedures in harsh environments, such as dissolving it in highly alkaline solutions or subjecting it to treatment in acidic conditions. In this study, lignin was extracted from coconut husk under milder conditions, using neutral solvents and ultrasonic treatment, which allowed us to obtain lignin with significantly improved properties. The developed method facilitated the creation of light-colored lignin, which was employed as a natural ingredient in sunblock cream. Furthermore, for the sake of comparison, lignin was extracted under more rigorous conditions using the traditional method. The research findings confirm that the light-colored lignin sample exhibits a higher level of UV absorption. Furthermore, light-colored lignin demonstrates a synergistic effect when combined with commercial moisturizing creams and sunscreens, leading to a significant enhancement in their SPF performance against both UVA and direct sunlight exposure. This study highlights the potential value of incorporating lignin as a valuable natural ingredient in sunblock and cosmetic products.

Full-spectrum cannabidiol reduces UVB damage through the inhibition of TGF-β1 and the NLRP3 inflammasome.

The thermodynamic characteristics, antioxidant potential, and photoprotective benefits of full-spectrum cannabidiol (FS-CBD) against UVB-induced cellular death were examined in this study. In silico analysis of CBD showed antioxidant capacity via proton donation and UV absorption at 209.09, 254.73, and 276.95 nm, according to the HAT and SPLET methodologies. FS-CBD protected against UVB-induced bacterial death for 30 min. FS-CBD protected against UVB-induced cell death by 42% (1.5 μg/mL) and 35% (3.5 μg/mL) in an invitro keratinocyte cell model. An invivo acute irradiated CD-1et/et mouse model (UVB-irradiated for 5 min) presented very low photoprotection when FS-CBD was applied cutaneously, as determined by histological analyses. Invivo skin samples showed that FS-CBD regulated inflammatory responses by inhibiting the inflammatory markers TGF-β1 and NLRP3. The docking analysis showed that the CBD molecule had a high affinity for TGF-β1 and NLRP3, indicating that protection against inflammation might be mediated by blocking these proinflammatory molecules. This result was corroborated by the docking interactions between CBD and TGF-β1 and NLRP3, which resulted in a high affinity and inhibition of both proteins The present work suggested a FS-CBD moderate photoprotective agent against UVB light-induced skin damage and that this effect is partially mediated by its anti-inflammatory activity.

π-Conjugated Structure Enhances the UV Absorption Performance of Carbon Dots and Application in the Design of Light-Colored Sunglasses

π-Conjugated Structure Enhances the UV Absorption Performance of Carbon Dots and Application in the Design of Light-Colored Sunglasses

Quantification of the Plasma Concentration of Vadadustat by High-Performance Liquid Chromatography with Ultraviolet Detection and Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry.

An inexpensive, simple, and accurate plasma concentration measurement system is needed to actively conduct pharmacokinetic and pharmacodynamic analyses of vadadustat, hypoxia-inducible factor-prolyl hydroxylase inhibitor, in clinical settings. In this study, the authors aimed to develop a method for measuring vadadustat in human plasma that could be applied for therapeutic drug monitoring using high-performance liquid chromatography with ultraviolet detection (HPLC-UV) in a clinical setting. Plasma samples (100 μL) were pretreated with acetonitrile using butyl paraoxybenzoate as an internal standard. Chromatographic separation was performed on a SunShell PFP C18 column (2.6 μm, 4.6 mm × 150 mm). The mobile phase consisted of (A) 20 mM of phosphate buffer (pH 2.4) and (B) acetonitrile (60:40, v/v), delivered isocratically at a flow rate of 1 mL/min. The analytes were detected by UV absorbance at a wavelength of 220 nm, and the column temperature was 40°C. To evaluate the applicability of HPLC-UV in a clinical setting, blood samples were collected at 19 time points from 7 patients who had been taking vadadustat. The calibration curve was linear over the concentration range of 0.2-150 mcg/mL (R2 > 0.99). Intra-assay and interassay accuracy, precision, and stability met the Food and Drug Administration recommendations. The vadadustat plasma concentrations of patients analyzed using the current HPLC-UV method were almost equal to those measured using ultra-performance liquid chromatography-tandem mass spectrometry (mean difference: 0.13 mcg/mL). Large variability in the dose-adjusted plasma concentrations of vadadustat at 12 hours after administration was observed between patients (coefficient of variation = 57.6%). This HPLC-UV method is a simple, accurate quantification method for evaluating plasma concentrations in patients taking vadadustat in a clinical setting.