Ultrasound-assisted Technique Research Articles

In Vitro Wound-Healing Potential of Phenolic and Polysaccharide Extracts of Aloe vera Gel.

The present study aimed to conduct a comparative investigation of the biological properties of phenolic and polysaccharide extracts obtained using an ultrasound-assisted technique from Aloe vera gel and their effects on each stage of the wound healing process in in vitro experimental models. HPLC analysis showed that the phenolic extract contained aloin, ferulic, and caffeic acid, as well as quercetin dihydrate, as major compounds. Capillary zone electrophoresis indicated the prevalence of mannose and glucose in the polysaccharide extract. Cell culture testing revealed the anti-inflammatory properties of the phenolic extract at a concentration of 0.25 mg/mL through significant inhibition of pro-inflammatory cytokines-up to 28% TNF-α and 11% IL-8 secretion-in inflamed THP-1-derived macrophages, while a pro-inflammatory effect was observed at 0.5 mg/mL. The phenolic extract induced 18% stimulation of L929 fibroblast proliferation at a concentration of 0.5 mg/mL, enhanced the cell migration rate by 20%, and increased collagen type I synthesis by 18%. Moreover, the phenolic extract exhibited superior antioxidant properties by scavenging free DPPH (IC50 of 2.50 mg/mL) and ABTS (16.47 mM TE/g) radicals, and 46% inhibition of intracellular reactive oxygen species (ROS) production was achieved. The polysaccharide extract demonstrated a greater increase in collagen synthesis up to 25%, as well as antibacterial activity against Staphylococcus aureus with a bacteriostatic effect at 25 mg/mL and a bactericidal one at 50 mg/mL. All these findings indicate that the phenolic extract might be more beneficial in formulations intended for the initial phases of wound healing, such as inflammation and proliferation, while the polysaccharide extract could be more suitable for use during the remodeling stage. Moreover, they might be combined with other biomaterials, acting as efficient dressings with anti-inflammatory, antioxidant, and antibacterial properties for rapid recovery of chronic wounds.

A horizontal and perpendicular interlaminar approach for intrathecal nusinersen injection in patients with spinal muscular atrophy and scoliosis: an observational study

BackgroundLumbar puncture is challenging for patients with scoliosis. Previous ultrasound-assisted techniques for lumbar puncture used the angle of the probe as the needle trajectory; however, reproducing the angle is difficult and increases the number of needle manipulations. In response, we developed a technique that eliminated both the craniocaudal and lateromedial angulation of the needle trajectory to overall improve this technique. We assessed the feasibility and safety of this method in patients with scoliosis and identify factors related to difficult lumbar puncture.MethodsPatients with spinal muscular atrophy and scoliosis who were referred to the anesthesia department for intrathecal nusinersen administrations were included. With a novel approach that utilized patient position and geometry, lumbar puncture was performed under ultrasound guidance. Success rates, performance times and adverse events were recorded. Clinical-demographic and spinal radiographic data pertaining to difficult procedures were analyzed.ResultsSuccess was achieved in all 260 (100%) lumbar punctures for 44 patients, with first pass and first attempt success rates of 70% (183/260) and 87% (226/260), respectively. Adverse events were infrequent and benign. Higher BMI, greater skin dural sac depth and smaller interlaminar size might be associated with greater difficulty in lumbar puncture.ConclusionsThe novel ultrasound-assisted horizontal and perpendicular interlaminar needle trajectory approach is an effective and safe method for lumbar puncture in patients with spinal deformities. This method can be reliably performed at the bedside and avoids other more typical and complex imaging such as computed tomography guided procedure.

Leaching kinetics of ash impurities from aphanitic graphite by combining dual-ultrasound and hydrochloric acid–potassium hydrogen fluoride

The hydrochloric acid-fluoride salt is useful for purifying graphite. Ultrasonic-assisted technique can significantly reduce the leaching time and improve the leaching efficiency. Compared with single-frequency, dual-frequency ultrasound has the advantages of high energy efficiency and wide cavitation area. In this study, the combination of a dual-frequency ultrasound-assisted technique and hydrochloric acid–potassium hydrogen fluoride leaching agent was proposed for the leaching of aphanitic graphite to remove impurity minerals. First, the effects of probe-type ultrasonic power, tank-type ultrasonic power, temperature, HCl concentration, ultrasonication time, and KHF2 concentration on the purification efficiency of impurities from aphanitic graphite with the assistance of dual-frequency ultrasound were investigated. It was found that the combination of dual-frequency ultrasound and hydrochloric acid–potassium hydrogen fluoride can reduce the ash content of aphanitic graphite from 13.02 % to 1.02 % with an ash removal rate of 94.17 %. Second, volumetric reaction models and unreacted shrinkage nucleation models were used to fit the kinetics of impurities from aphanitic graphite with dual-frequency ultrasound-assisted HCl-KHF2 leaching. Kinetic analysis shows that the volumetric reaction model with chemical control was better to fit the leaching process. This is consistent with the calculation results of the activation energy of the reaction (Ea = 58.13 kJ/mol). Finally, laser particle size analyzer, X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), X-ray fluorescence spectroscopy (XRF), transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDS) were used to analyze the fugacity of impurity minerals during the process of dual-frequency ultrasound-assisted HCl-KHF2 leaching. It was revealed that combining ultrasonic cavitation fragmentation with chloric acid–potassium fluoride generated SiF4 with high solubility, thereby removing silica-bearing impurities more efficiently. The challenges in further reducing ash content from 1.02 % in the leached concentrate of aphanitic graphite could be attributed to the existence of titanium-bearing mineral impurities on the surface of graphite particles and the presence of silica-bearing minerals between graphite carbon layers.

Comparative evaluation of conventional and ultrasound assisted tube cystotomy for obstructive urolithiasis in cattle

The aim of this study was to evaluate the efficacy of conventional and ultrasound assisted tube cystotomy techniques for obstructive urolithiasis in 12 cattle by allowing two groups. Group-I, animals were subjected to conventional tube cystotomy, whereas in group- II, ultrasound assisted tube cystotomy was performed using Foley’s catheter under deep sedation with xylazine hydrochloride and local infiltration anaesthesia. Clinically, all animals showed urethral pulsation, dribbling of urine, futile attempts, bellowing, congested mucous membrane, sunken eyes, dry muzzle and teeth grinding. Non-significant changes were observed in haematological and biochemical values, however neutrophilia and alkaline pH of urine was prominent. Ultrasound assisted tube cystotomy technique consumed less time (40.00±1.29 min) with small incision and minimal bleeding as compared to conventional tube cystotomy.

The ultrasound-guided versus standard technique for peripheral intravenous catheter placement by nurses: A systematic review and meta-analysis

AimTo comprehensively evaluate the efficacy of Ultrasound-guided technique for peripheral intravenous catheter placement by nurses in their daily practice. BackgroundPeripheral intravenous catheter insertion is a common clinical procedure in healthcare settings. Ultrasound-guided peripheral intravenous placement has emerged in recent decades and was recognized as particularly useful in some specific patient groups. MethodsStudies that had compared the ultrasound-guided and traditional approaches were eligible for inclusion and further analysis. The primary outcome was the success rate on the first intravenous insertion attempt. The secondary outcomes included the time needed for successful insertion, and the average number of attempts to establish the IV access. We systematically assess all studies using Cochrane Collaboration's Risk of Bias tool and the Newcastle-Ottawa Scale. We calculated the odds ratio and standardized mean difference with 95 % confidence intervals for the outcomes. Data were analyzed and visualized on Review Manager 5.3.4 and Stata 16.0. Results23 studies were included (17 randomized controlled trials and six cohort studies) with a population of 2051 patients offered ultrasound-assisted technique and 2479 treated with the conventional approach for comparison. The former approach was associated with a higher success rate on the first attempt in comparison (OR = 2.95, 95 % CI: 1.86, 4.69). This technique also took less time and less acupuncture to patients’ skin (SMD = −0.62, 95 % CI: 1.01, −0.23; SMD = −0.55, 95 % CI: 0.92, −0.18). In the sub-group analyses, children were more likely to benefit from ultrasound guided technique. Ultrasound guided technique demonstrated consistent and significant benefits in emergency clinical settings. Hospitals from different geographical locations exhibited similar trends in the three outcomes. Year of publication and study design revealed inconsistent and insignificant outcomes. ConclusionsUltrasound-guided technique can be a safer, faster, and more effective alternative to the traditional approach for nurses to establish intravenous access across different clinical settings and age groups.

A New Revolutionary Green Technology for the Extraction of Essential Oil Using Microwave and Ultrasound-assisted Techniques

Background: Essential oils are utilized in various food applications and are a rich source of naturally occurring volatile components. The extraction of essential oils has used conventional techniques for several years, but these methods require a long duration of time, more solvent, and high energy. However, recent advancements have led to novel and eco-friendly techniques that significantly enhance the essential oil yield while minimizing the use of resources. Method: This study describes the recent research on the extraction of essential oils and their components, focusing on microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE). Result: This review explores the instrumentation, mechanism, and applications behind MAE and UAE. It also describes the emerging technologies for the extraction of essential oils, along with their optimized conditions. Conclusion: These techniques represent a more sustainable and efficient approach for the extraction of essential oil from various plant sources, aligning with the principles of green chemistry.

A Concise Overview of Ultrasound-Assisted Techniques for the Production of 2D Materials

The production of low-dimensional materials is the key topic of nanoscience. The development of new routes to downsize organic and inorganic materials has focused the attention of a great part of the scientific community that is still debating on the best route to pursue. Among nanostructures, 2D species have been investigated since the discovery of graphene. Nonetheless, the production of 2D materials is very complex, and the discussion on which is the most profitable way is still open. Ultrasound-assisted techniques represent one of the best routes for the production of 2D materials with minimum consumption of energy and best performances. Accordingly, we present a concise and exhaustive discussion about the use of ultrasound-assisted techniques for the production of both organic and inorganic 2D materials, also providing a theoretical overview of the mechanism behind the use of ultrasounds in synthetic material science.

Ultrasound assisted lycopene extraction from tomato skin waste by volatile natural deep eutectic solvent

In this work, a completely green method was applied for the extraction of lycopene from tomato skins waste. The combination of the ultrasound-assisted technique (UAE) and the use of volatile natural deep eutectic solvent (VNADES) menthol: thymol 1:1 allowed to obtain a green extraction process. Lycopene content was assessed by HPLC-DAD and compared with the lycopene extraction yields obtained using α-pinene and n-hexane as extraction solvents. The evaporation of the DES menthol:thymol was conducted using a Vacuum Vortex Evaporator. The highest concentration of extracted lycopene was obtained with n-hexane (735.9 mg/g of dried extract (DE)) compared to terpene-based solvents; 468.1 mg/g and 358.7-484.2 mg/g DE were recovered from α-pinene and DES menthol/thymol as azeotropic mixture and as such, respectively.

Sustainable Synthesis of Green Cu2O Nanoparticles using Avocado Peel Extract as Biowaste Source

In recent years, there has been a significant shift towards the production of advanced nanomaterials using sustainable methods, reflecting a heightened focus on reducing environmental impact and optimizing resource utilization. This growing interest stems from the necessity to address environmental concerns and embrace eco-friendly practices in material synthesis. The primary objective of this study is to explore the eco-friendly synthesis of novel metal oxide nanoparticles (NPs) by utilizing bio-waste as a sustainable precursor. The central theme revolves around employing ultrasound-assisted techniques for Cu2O NP synthesis, with a specific emphasis on utilizing avocado peel waste as an effective phytochemical compound for capping. Through systematic process optimization, we conducted a comprehensive assessment of the resulting NPs, delving into their chemical, thermal, and surface properties. Advanced characterization techniques, including X-ray Diffraction analysis (XRD), Transmission Electron Microscopy (TEM), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and Fourier-transform Infrared Spectroscopy (FT-IR), were employed to gain profound insights into the attributes of the synthesized NPs. Our experimental results conclusively demonstrate the successful synthesis of spherical Cu2O NPs, each with a diameter of 25 ± 2 nm. This was achieved by utilizing avocado peel waste (APW) and ultrasound-assisted cavitation at room temperature. The study significantly contributes to our understanding of the potential applications of green synthesis methods, paving the way for environmentally friendly and cost-effective Cu2O NPs.

Transcortical transcatheter ultrasound-assisted technique for deep-seated brain tumors. Technical note.

Surgery of deep-seated brain tumors can be challenging. Several methods have been described to facilitate transcortical approaches, including ultrasound-assisted resection. Ultrasound-guided placement of a standard ventricular catheter is a widely reported technique and has been used to approach these lesions via the transcortical route. We describe how we usually perform this useful technique to assist and enhance the transcortical resection of some deep-seated brain tumors. Standard electromagnetic frameless navigation (S8 Neuronavigation System, Medtronic, Minneapolis, USA) was employed to focus the craniotomy and to plan the trajectory of the ventricular catheter. After dural opening, an ultrasound device (Arietta 850, Hitachi-Aloka Medical, Tokyo, Japan) was used for intraoperative ultrasound (IOUS) assessment. A ventricular catheter was placed from the cortex to the lateral wall of the tumor under direct real-time IOUS visualization to guide the further transcortical dissection. Transcortical transcatheter ultrasound-assisted technique involved minimal time and infrastructure requirements. There were no major technical difficulties during its use, providing confidence and improving subcortical white matter dissection by guiding the route to the tumor. Recent improvement of IOUS image-quality devices offers several attractive options for real-time navigation. The combination of conventional neuronavigation systems with real-time IOUS assessment during the intradural step provides a higher degree of control by improving the execution of the surgery. We hope this description may be a useful tool for some selected cases and contribute to the further enhancement and improvement of this widely used technique.

Ultrasound assisted extraction of amino acids and nucleobases from clay minerals and astrobiological samples

The study of organic molecules in meteorite and return samples allows for the understanding of the chemistry that undergoes in our Solar System. The present work aims at studying ultrasound assisted extraction technique as effective extraction method for these molecules in extraterrestrial samples and analogs. Optimal conditions were selected from the investigation of ultrasonic frequency, irradiation duration and solvent effects on amino acids, nucleobases and dipeptides extraction yields from a model clay-rich mineral matrix. Optimal ultrasound-assisted extraction parameters were frequency of 20 kHz within 20 min irradiation time and methanol/water solvent ratio of 1. We then validated this protocol on Mukundpura and Tarda meteorite fragments and compared it to the reference extraction protocol used in astrobiology and based on 24 h extraction time at 100 °C in water We obtained similar quantitative results without any racemization with both methodologies.

Evaluation of a modified ultrasound-assisted technique for mid-thoracic epidural placement: a prospective observational study

BackgroundAlthough mid-thoracic epidural analgesia benefits patients undergoing major surgery, technical difficulties often discourage its use. Improvements in technology are warranted to improve the success rate on first pass and patient comfort. The previously reported ultrasound-assisted technique using a generic needle insertion site failed to demonstrate superiority over conventional landmark techniques. A stratified needle insertion site based on sonoanatomic features may improve the technique.MethodsPatients who presented for elective abdominal or thoracic surgery requesting thoracic epidural analgesia for postoperative pain control were included in this observational study. A modified ultrasound-assisted technique using a stratified needle insertion site based on ultrasound images was adopted. The number of needle passes, needle skin punctures, procedure time, overall success rate, and incidence of procedure complications were recorded.ResultsOne hundred and twenty-eight subjects were included. The first-pass success and overall success rates were 75% (96/128) and 98% (126/128), respectively. In 95% (122/128) of patients, only one needle skin puncture was needed to access the epidural space. The median [IQR] time needed from needle insertion to access the epidural space was 59 [47–122] seconds. No complications were observed during the procedure.ConclusionsThis modified ultrasound-assisted mid-thoracic epidural technique has the potential to improve success rates and reduce the needling time. The data shown in our study may be a feasible basis for a prospective study comparing our ultrasound-assisted epidural placements to conventional landmark-based techniques.

Microwave and ultrasound assisted extraction techniques with citric acid of pectin from Pomelo (Citrus maxima) peel

This current research attempted to obtain pectin from Pomelo (Citrus maxima) peels using conventional heating, microwave-assisted extraction (MAE), and ultrasound-assisted extraction (UAE) techniques with organic citric acid. In order to characterize pectin extracted using conventional heating, MAE, and UAE, yield, pH, solubility, ash content, equivalent weight, anhydrouronic acid content, degree of esterification methoxyl content were taken into consideration. On physicochemical properties, the extraction techniques had a significant effect. The findings demonstrated that the MAE method produced the highest amount of pectin (26.63 ± 0.21 %). On the basis of the Degree of Esterification (DE) value, pectins were all classified as high-methoxypectins (HMP). According to anhydrouronic acid (AUA) content, the extracted pectins were extremely pure. Fourier transform infrared (FT-IR) spectroscopy was used to structurally characterize pectin that was extracted using three different methods, and the results revealed that pectin has functional groups between 1740 and 800 cm-1 spectrally.

Analytical Validation Study with Uncertainty Evaluation of the Method for Quantitative Determination of Hesperidin in the Extracted Product and Mandarin Processing Waste

The aim of this study was to develop and validate an alternative, selective, reproducible, and high-yield extraction-based method by ultrasound-assisted technique combined with an effective, specific, sensitive, and rapid analytical HPLC procedure for obtaining hesperidin from mandarin (Citrus unshiu) peel as waste material in citrus processing industries and its quantitative determination in the obtained extracted product and citrus waste materials as well. The evaluation of the uncertainty of the developed method is also described in the present work. The proposed method is focused not only on obtaining hesperidin but also provides the possibility for obtaining other valuable bioactive compounds within the single stepwise extraction process. The proposed method was validated concerning the following validation parameters: robustness, system suitability test, specificity, linearity range, precision, accuracy, sensitivity, limits of quantification (LOQ), and detection (LOD). A design of experiments using the Placket-Burman approach was used for the robustness study of the combined method. The measurement uncertainty of the proposed method was evaluated based on the four-step process using a combination of two appropriate - bottom-up and top-down approaches using the method validation data. The LOD and LOQ of the analytical procedure were 0.00001 mg/mL and 0.000025 mg/mL, respectively. The calibration curve (0.000025-0.5 mg/mL) is linear and the square of the correlation coefficient is equal to 0.99992. The determined average amount of hesperidin in the dry citrus peel samples is equal to 35.36 ± 3.14 mg/g (k=2, 95 % level of confidence). The mean recovery of the combined method is 91.48 %. The purity of the dry-extracted product of hesperidin is not less than 90 %.

Research progress of ultrasound in accurate evaluation of cartilage injury in osteoarthritis.

Osteoarthritis (OA) is a prevalent cause of joint algesia, loss of function, and disability in adults, with cartilage injury being its core pathological manifestation. Since cartilage damage is non-renewable, the treatment outcome in the middle and late stages of OA is unsatisfactory, which can be minimized by changing lifestyle and other treatment modalities if diagnosed and managed in the early stages, indicating the importance of early diagnosis and monitoring of cartilage injury. Ultrasound technology has been used for timely diagnosis and even cartilage injury treatment, which is convenient and safe for the patient owing to no radiation exposure. Studies have demonstrated the effectiveness of ultrasound and its various quantitative ultrasound parameters, like ultrasound roughness index (URI), reflection coefficient (R), apparent integrated backscatter (AIB), thickness, and ultrasound elastography, in the early and accurate assessment of OA cartilage pathological changes, including surface and internal tissue, hardness, and thickness. Although many challenges are faced in the clinical application of this technology in diagnosis, ultrasound and ultrasound-assisted techniques offer a lot of promise for detecting early cartilage damage in OA. In this review, we have discussed the evaluation of ultrasonic cartilage quantitative parameters for early pathological cartilage changes.

Polymer Composite Thermoforming: Ultrasonic-Assisted Optimization for Enhanced Adhesive Performance in Automotive Interior Components.

Dual-component epoxy resins are widely used for bonding different materials in automotive interior processing. However, due to the complexity and variability of automotive interior parts, uneven temperature distribution on curved surfaces during the thermoforming process can lead to uneven thermal stress distribution, damaging the interior components. This study focuses on addressing the damage issues caused by uneven thermal stress distribution during the thermoforming of automotive interior components. By monitoring the temperature and strain on the adhesive surface of the interior components during processing, using sensors and combining the readings with a finite element simulation, damage to the adhesive during processing was simulated. Based on this, a segmented thermoforming method for the model surface was employed, but it was found that this method did not significantly reduce the level of damage to the adhesive during application. Building upon the segmented simulation, significant results were achieved by applying temperature modulation at a certain frequency to adjust the damage of the interior components during processing. The techniques used in this study successfully reduced the unevenness of the adhesive surface temperature, improved the performance of the adhesive during application through segmented optimization and the application of ultrasound-assisted techniques, and markedly reduced the manufacturing process's energy consumption.

Ultrasound-assisted oxalate reduction vs. conventional methods: A comparative study in Elephant foot yam (Amorphophallus paeoniifolius) and process optimization using response surface methodology

Elephant foot yams are high in protein, carbohydrates, sugars, fiber, and glucose, all of which are good sources of nutrients. Despite numerous investigations on yam phytochemical concentrations employing different treatments, the quality and amount of phytochemical loss from Elephant foot yam is a major barrier to the traditional extraction procedure. The oxalate content of elephant foot yam has led to severe underutilization. Several techniques, including boiling, ultrasonication, and NaCl treatment, have been devised to reduce calcium oxalate. To achieve the greatest possible reduction of oxalate content in the yam, the three-element Box-Behnken design was utilized in this study to optimize the ultrasound-aided reduction of oxalate from elephant foot yam. To increase the reduction of antinutritional factors such as oxalate from Elephant Foot Yam, an ultrasound-assisted technique was utilized to optimize the sonication period (10, 15 or 20 min), solid-liquid ratio (1: 10, 1:20, and 1:30 g/ml), and ultrasound power (20, 30, 40 Watt). The best values obtained for the reduction of oxalate were 43.2%, where the solid-liquid ratio was 29.08 g/ml, the sonication power was 39.93 Watt, and the sonication period was 20 min. The outcomes demonstrated that UAE reduces oxalate more than the traditional approach and that UAE was a useful and effective way for lowering oxalate in elephant foot yam.

Ultrasound-assisted lumbar puncture with a horizontal and perpendicular paramedian approach based on positioning in patients with abnormal spinal anatomy: a case report and technical description

BackgroundThe use of ultrasound has been reported to be beneficial in challenging neuraxial procedures. The angled probe is responsible for the main limitations of previous ultrasound-assisted techniques. We developed a novel technique for challenging lumbar puncture, aiming to locate the needle entry point which allowed for a horizontal and perpendicular needle trajectory and thereby addressed the drawbacks of earlier ultrasound-assisted techniques.Case presentationPatient 1 was an adult patient with severe scoliosis who underwent a series of intrathecal injections of nusinersen. The preprocedural ultrasound scan revealed a cephalad probe’s angulation (relative to the edge of the bed) in the paramedian sagittal oblique view, and then the probe was rotated 90° into a transverse plane and we noted that a rocking maneuver was required to obtain normalized views. Then the shoulders were moved forward to eliminate the need for cephalad angulation of the probe. The degree of rocking was translated to a lateral offset from the midline of the spine through an imaginary lumbar puncture’s triangle model, and a needle entry point was marked. The spinal needle was advanced through this marking-point without craniocaudal and lateromedial angulation, and first-pass success was achieved in all eight lumbar punctures. Patient 2 was an elderly patient with ankylosing spondylitis who underwent spinal anesthesia for transurethral resection of the prostate. The patient was positioned anteriorly obliquely to create a vertebral rotation that eliminated medial angulation in the paramedian approach. The procedure succeeded on the first pass.ConclusionsThis ultrasound-assisted paramedian approach with a horizontal and perpendicular needle trajectory may be a promising technique that can help circumvent challenging anatomy. Larger case series and prospective studies are warranted to define its superiority to alternative approaches of lumbar puncture for patients with difficulties.

Ultrasound-assisted green synthesis of silver nanoparticles from Allium sativum, its characterization, antimicrobial capabilities and thermo-plasmonic studies

Bottom-up approach for the green synthesis of silver nanoparticles (AgNPs) from Allium sativum cloves using ultrasound-assisted technique has been investigated. The fabricated AgNPs were characterized using advanced techniques of spectroscopy, scattering, and microscopy. The synthesized AgNPs have a size distribution of 36.15 ± 8.54 nm, as confirmed by TEM analysis and 44.18 ± 0.55 nm as per XRD analysis. The fabricated AgNPs in this range exhibited greater surface plasmon resonance (SPR) for absorption, scattering and extinction coefficient. Higher negative ζ potential showed long term stability of fabricated AgNPs without agglomeration. Antimicrobial efficacy of fabricated AgNPs demonstrated high activity against pathogenic bacteria making them a promising candidate for applications in medical, environmental, biomedical, food packaging and allied fields.

Investigation of the Effect of Actinidia Deliciosa Kiwi Fruit Extracts on the Hematological and Biochemical Blood Parameters of Swiss Male

The kiwi fruit is renowned for its high quantities of minerals, antioxidants, and vitamins as well as for its nutritional worth. The therapeutic qualities of kiwi fruit extract, such as its anti-tumor actions, anti-inflammatory, and antioxidants, have been used in food and medicine. However, further research is required to fully understand the chemical composition and potential health advantages of kiwi fruit extracts. This study extracted kiwi fruit peelings and core into aqueous and alcoholic solutions using conventional and ultrasound-assisted techniques The effects of the extracts on liver enzymes, kidney functions, and blood lipid proteins in Swiss male albino mice was also investigated in a laboratory animal experiment. The findings imply potential advantages for lowering the risk of atherosclerosis and cardiovascular diseases as the treatment with KPa20 from ultrasound-treated kiwi peels produced superior outcomes with reduced enzyme LDL and VLDL levels compared to the control group. The ALT and AST enzyme levels were not significantly changed by kiwi fruit extracts, indicating no negative effects. In the therapy group, the enzyme levels for ALT and AST were (39.20, 36.40) and (33.50, 32.33) international units per litre, respectively. While normal extracts (WP, KC, and KP) had slightly lower urea levels than those given extracts exposed to ultrasonic waves (WPa20, KCa20, and KPa20), the latter were slightly higher. Creatinine levels in the blood were not considerably impacted. The values for the treatment groups’ creatinine were 0.87 (WP), 0.83 (KCa20), 0.90 (KPa20), and 0.93 (KP). The study explored the health benefits of kiwi fruit peels and cores, revealing that Ultrasound technology was used to extract active chemicals, including phenolic compounds. Results showed increased extraction and antioxidant activity in extracts. Both regular and ultrasound-exposed kiwi fruit extracts showed therapeutic effects, decreasing triglyceride levels, total cholesterol, and lipoprotein levels.