Ultrasonic Technology Research Articles

In vitro evaluation of the antitumor and antioxidant effects of purified and characterized polysaccharides from Ganoderma applanatum.

In this study, the chemical properties of Ganoderma applanatum polysaccharides (GAP) were systematically investigated, followed by a comprehensive analysis of their antitumor and antioxidant capabilities. Ultrasonic circulation technology was employed for the extraction of GAP, facilitating the procurement of crude polysaccharides through the Sevag method, dialysis, and sequential alcohol precipitation. The chemical constituents of these polysaccharides were subsequently analyzed utilizing Fourier-transform infrared spectroscopy and gas chromatography-mass spectrometry. The antitumor and antioxidant properties of the polysaccharide components were assessed utilizing 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and free radical scavenging methods, respectively. Gradient ethanol precipitation yielded three principal polysaccharide fractions: GAP-40, GAP-60 and GAP-80. Analysis revealed glucose as the predominant component in these fractions, with average molecular weights determined to be 77.75, 9.25 and 1.03 kDa, respectively. The antitumor activity of GAP-40, GAP-60 and GAP-80 against MCF-7 cells demonstrated both time and concentration dependence. Significantly, GAP-40, at a concentration of 1000 μg/mL over 48 h, presented a notable inhibition rate of 56.77%, outperforming GAP-60 and GAP-80. Furthermore, the antioxidant capacities of GAP-40, GAP-60 and GAP-80 were comparably significant to that of vitamin C, with detailed analysis revealing marked differences in antioxidant activity among the GAP variants. Specifically, GAP-40 exhibited superior efficacy in scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS+) radicals relative to GAP-60 and GAP-80. In contrast, GAP-80 was distinguished by its exceptional hydroxyl radical scavenging capacity, surpassing that of both GAP-40 and GAP-60. These results substantiate the potential of GAPs as viable and effective antitumor agents, additionally suggesting their utility as functional foods endowed with antioxidant attributes.

AVIA-SHIELD: Advanced Bird Strike Prevention Using Ultrasonic and Laser Technologies for Aircraft Safety

Bird strikes pose significant risks to aviation safety and can lead to costly damages and delays. This project explores an innovative approach to preventing bird strikes on aircraft by leveraging ultrasonic technology. This method prevents and reduces bird strikes humanely and non-lethally while minimizing disruptions to aerodrome operations and reducing economic losses. The primary focus is on ground- level bird deterrence. The project employs buzzer sound systems combined with ultrasonic waves to create an auditory and sensory deterrent that disrupts bird behavior near runways and aircraft areas. The effectiveness of these techniques will be evaluated through field tests and simulations, aiming to enhance aircraft safety and reduce the frequency of bird strike incidents. Keywords: Bird Strike, Radar, Ultrasonic emission, laser protection.

COMPARISON OF THE EFFECTS OF STANDARD NOZZLES AND EXTENSION TUBES ON THE EROSION OF PMMA USING PULSATING WATER JET TECHNOLOGY

The study of bone cement disintegration is important for advancing orthopedic and trauma surgery outcomes. Bone cement, commonly used in joint replacement procedures, plays a vital role in fixation implants. However, the long-term stability and integrity of bone cement are critical for the success of these procedures. This study focuses on the use of ultrasonic pulsating water jet technology for the selective removal of bone cement, aiming to provide a precise and efficient method for revision surgeries. The disintegration efficiency is measured in terms of depth, width and volume of the disintegrated bone cement as a result of variations in the nozzle geometry, supply pressure and traverse speed. Two different nozzle types, the standard nozzle insert and nozzle with an extension tube of 100 mm having a diameter of 0.3 mm, are used. Two supply pressure levels were taken as 10 and 20 MPa with five levels of traverse speeds as 0.5, 1, 1.5, 2 and 2.5 mm/s. The results showed an increased disintegration efficiency for all experimental conditions using an extension tube nozzle as compared to a standard nozzle (20 – 25% in terms of disintegration volume). Also, the disintegration efficiency increased with higher pressure level values (8.2 mm3 and 4.85 mm3 for p = 20 and 10 MPa, respectively) and lower traverse speed values. The results showed a promising direction in terms of the utilization of an ultrasonic pulsating jet with a modified nozzle type for higher bone cement disintegration efficiency.

Experimental study on heat transfer and resistance of round tube with tube sheet under ultrasonic action

AbstractEnergy is vital to the survival and development of human beings. In the era of ‘carbon neutrality’, all walks of life around the world are upgrading their technological capabilities to reduce carbon emissions. As a new type of active strengthening technology to improve the comprehensive performance of heat exchangers, ultrasonic technology has attracted the attention of more and more scholars. From the actual installation situation, a set of ultrasonic enhanced heat transfer test device with tube sheet round tube was built. After experimental research and data analysis, the influence of ultrasonic sound intensity, frequency, and position on heat transfer, flow resistance, and comprehensive performance of heat exchange tube under different working conditions and without ultrasonic wave is studied. The results show that the ultrasonic enhanced heat transfer and drag reduction capacity increases with the decrease of ultrasonic frequency, and under the action of ultrasonic waves of different frequencies, the critical sound intensity of its enhanced heat transfer and drag reduction performance is different. The drag reduction performance of the ultrasonic heat exchange tube is increased by 18.41%, the heat transfer performance is increased by 36.53%, and the overall performance is increased by 20.57%.

Building Budget-Friendly Obstacle-Avoiding Robots Using Arduino and Ultrasonic Technology

Building Budget-Friendly Obstacle-Avoiding Robots Using Arduino and Ultrasonic Technology

Physicochemical characterization of thermally oxidized rapeseed oil: An insight into combining acoustic diagnostic technique and chemometrics

This study aimed to apply an ultrasonic pulse-echo system to characterize thermally oxidized rapeseed oil. After 60 h of heating treatment (165 ± 5°C), the physicochemical (density, viscosity, acid value, iodine value and polar compounds) and acoustic properties (velocity, acoustic impedance, maximum amplitude of the first echo, difference in amplitude, and area under the curve) of rapeseed oil were measured. Support vector machine, random forest (RF), and backpropagation neural network algorithms were used to establish quantitative prediction models for viscosity and polar compounds based on the acoustic properties of rapeseed oil. The results indicated significant correlations between acoustic impedance and viscosity (R=0.70), as well as between acoustic impedance and polar compounds (R=0.79). Heating treatment reduced oil unsaturation and led to the formation of oxidative and polymeric compounds, which in turn increased the velocity and impedance, while decreasing the other three acoustic features. The RF model yielded the best performance in predicting viscosity (R2=0.7944) and polar compounds (R2=0.8385). These findings highlight that ultrasonic technology not only accurately predicts key quality parameters, but also provides a rapid, non-destructive, and cost-effective alternative to traditional methods for characterizing thermally oxidized rapeseed oil.

Fast and Smart State Characterization of Large-Format Lithium-Ion Batteries via Phased-Array Ultrasonic Sensing Technology.

Lithium-ion batteries (LIBs) are widely used in electric vehicles and energy storage systems, making accurate state transition monitoring a key research topic. This paper presents a characterization method for large-format LIBs based on phased-array ultrasonic technology (PAUT). A finite element model of a large-format aluminum shell lithium-ion battery is developed on the basis of ultrasonic wave propagation in multilayer porous media. Simulations and comparative analyses of phased array ultrasonic imaging are conducted for various operating conditions and abnormal gas generation. A 40 Ah ternary lithium battery (NCMB) is tested at a 0.5C charge-discharge rate, with the state of charge (SOC) and ultrasonic data extracted. The relationship between ultrasonic signals and phased array images is established through simulation and experimental comparisons. To estimate the SOC, a fully connected neural network (FCNN) model is designed and trained, achieving an error of less than 4%. Additionally, phased array imaging, which is conducted every 5 s during overcharging and overdischarging, reveals that gas bubbles form at 0.9 V and increase significantly at 0.2 V. This research provides a new method for battery state characterization.

AI-powered ultrasonic thermometry for HIFU therapy in deep organ

High-intensity focused ultrasound (HIFU) is considered as an important non-invasive way for tumor ablation in deep organs. However, accurate real-time monitoring of the temperature field within HIFU focal area remains a challenge. Although ultrasound technology, compared with other approaches, is a good choice for noninvasive and real-time monitoring on the temperature distribution, traditional ultrasonic thermometry mainly relies on the backscattered signal, which is difficult for high temperature (>50 °C) measurement. Given that artificial intelligence (AI) shows significant potential for biomedical applications, we propose an AI-powered ultrasonic thermometry using an end-to-end deep neural network termed Breath-guided Multimodal Teacher-Student (BMTS), which possesses the capability to elucidate the interaction between HIFU and complex heterogeneous biological media. It has been demonstrated experimentally that two-dimension temperature distribution within HIFU focal area in deep organ can be accurately reconstructed with an average error and a frame speed of 0.8 °C and 0.37 s, respectively. Most importantly, the maximum measurable temperature for ultrasonic technology has been successfully expanded to a record value of 67 °C. This breakthrough indicates that the development of AI-powered ultrasonic thermometry is beneficial for precise HIFU therapy planning in the future.

Application of ultrasonic imaging technology in beef cattle breeding management

ObjectiveThe aim of this study was to explore in depth the application of ultrasonic imaging technology in beef cattle reproduction management in order to improve the efficiency and management of beef cattle reproduction. MethodsIn this study, ultrasonographic diagnostic techniques were used to follow up the follicles and corpus luteum in the uterus and ovaries of dairy cows at different stages of development as well as at different periods of gestation of dairy cows, and to detect the effects of different fattening conditions of the cows and the number of litters on the sitting rate. ResultsThe diameter of mature follicles was generally around 16 mm, and the majority of them were 11–20 mm in diameter. Ultrasonography was used to detect early pregnancy in cows at 33–55 d. Ultrasound was used to identify the sex of the foetus most easily at 70–80 d. The results of this study showed that the sex of the foetus was most easily identified in cows at 70–80 d. The fat of the cow and the number of births also had a significant impact on pregnancy rates. ConclusionUltrasound imaging technology has an important application value in the management of beef cattle reproduction, and in pregnancy detection, it can achieve early and accurate diagnosis, improve the accuracy of detection, and differentiate between heifers in estrus and pregnant heifers. In addition, it can also be used for foetal sex identification at a specific period of time, providing a basis for breeding programmes.

Rancang Bangun Pengusir Hama Burung dan Belalang Pada Padi Menggunakan Gelombang Ultrasonik Berbasis Lora

Indonesia, as an agricultural country, faces the challenge of pests in the agricultural sector, one of which is the sparrow that often attacks rice plants, causing a decrease in rice yields. The use of traditional methods such as canned sound is considered less effective, so ultrasonic technology is chosen as a safer alternative to pesticides that can cause side effects to the environment. This research aims to design and test a sparrow and locust pest repellent tool on rice plants using ultrasonic waves based on LoRa technology, with the hope of offering a more efficient and environmentally friendly solution. Tests were conducted to determine the effectiveness of ultrasonic frequencies against sparrow and locust pests, as well as the maximum distance the tool can work. The device was tested with various wave frequencies (30 kHz, 35 kHz, 40 kHz) at different distances, and the LoRa communication range was measured until the signal was lost. The test results show that the optimal frequency to repel sparrows and locusts is 40 kHz with an effective range of up to 3 meters, and the LoRa module is able to transmit signals up to a distance of 63 meters. This research offers an alternative solution for farmers to repel pests effectively without harmful chemicals, as well as providing ease of tool control in areas without internet connection.

Study on the influence of aerosol atomization by ultrasonic atomization on coal spontaneous combustion

ABSTRACT Influenced by the complex environment and the nature of process materials in goaf, the prevention and control of spontaneous combustion of coal (CSC) in the deep part of goaf were facing many difficulties. To investigate the performance of ultrasonic atomized aerosols, a series of atomization experiments were conducted using a self-developed ultrasonic atomization device. The main conclusions are as follows: under the same atomization conditions, the atomized particle sizes of several inhibitors (except PAS-W) are concentrated in the <8 μm range, with a content of more than 88%, indicating that the aerosol particles produced by ultrasonic atomization are small in size and uniform in distribution. Compared with water and MgCl2 inhibitors, aerosol particles produced by PAS-W are less likely to pass through the voids of the coal body, and have poorer permeability and diffusivity. As the temperature increases, the viscosity and surface tension of the inhibitor decrease, and the percentage of aerosol particles with particle size <8 μm produced by ultrasonic atomization is more than 88%, indicating that the atomization effect is improved. After increasing the temperature, the contact angle between PAS-W inhibitor and coal reduces from 54.7° to 40.8°, and the wettability is better. Compared with raw coal, the final temperature of the PAS-W aerosol treated coal sample is delayed 21.86°C, and has significant retarding property. When the wind speed is 3 m/s, the effect of PAS-W aerosol particle generation, permeability, and particle size distribution is the best. The results of the study are of great significance in improving the ultrasonic atomized aerosol fire prevention technology and realizing large-scale CSC prevention in goaf.

Potential use of IoT Distance Measurement Tool in Boule Sports

In Petanque, each player aims to throw the boule closer to the jack. The closest boule to the jack among players will score the point. Currently, the distance of the boule to the jack is still measured using manual measurement tools such as measuring tape, string, and calipers. The manual measurement method is considered time-consuming and prone to inconsistent reading, which the ordinary referees and players conduct. A steady hand is required to hold the tape at two ends while squatting or kneeling. The technique of reading the measurement is also important to determine the accuracy of the length. This project aims to design and develop a prototype device that can measure the distance between jack and boule using a microcontroller and ultrasonic sensor technology. The device is expected to provide an instant measurement of the distance between the jack and the boule. The measurement data can be displayed on the mobile device to ease the user to view the result. This prototype device also counts the score points and determines the winner.

High stability enhanced ultrasonic microfluidic structure with flexible tip coupled bubbles

Ultrasonic microfluidic technology is a technique that couples high-frequency ultrasonic excitation to microfluidic chips. To improve the issues of poor disturbance effects with flexible tip structures and the susceptibility of bubbles to thermal deformation, we propose an enhanced ultrasonic microchannel structure that couples flexible tips with bubbles aiming to improve the disturbance effects and the stability duration. Firstly, we used finite element analysis to simulate the flow field distribution characteristics of the flexible tip, the bubble, and the coupling structure and obtained the steady-state distribution characteristics of the velocity field. Next, we fabricated ultrasonic microfluidic chips based on these three structures, employing 2.8 μm polystyrene microspheres as tracers to analyze the disturbance characteristics of the flow field. Additionally, we analyzed the bubble size and growth rate within the adhering bubbles and coupling structures. Finally, we verified the applicability of the coupling structure for biological samples using human red blood cells (RBCs). Experimental results indicated that, compared to the flexible tip and adhering bubble structures, the flow field disturbance range of the coupling structure increased by 439.53% and 133.48%, respectively; the bubble growth rate reduced from 14.4% to 3.3%. The enhanced ultrasonic microfluidic structure proposed in this study shows great potential for widespread applications in micro-scale flow field disturbance and particle manipulation.

ANÁLISE DE UM PROTÓTIPO DE BAIXO CUSTO PARA AUXILIAR NA ATRACAÇÃO DE TRANSPORTES FLUVIAIS

This work presents the development of a low-cost prototype to assist in the docking of river transport, using an approximation sensor based on ultrasonic technology to measure the distance between the vessel and the mooring point in order to guarantee safety during anchoring. To solve this need, a functional prototype was built using an Arduino microcontroller as a central control unit, integrated with an HC-SR04 ultrasonic sensor to measure distances, and a 7-segment display to display the data collected in real time. The system allows the captain to have a clear reading of the remaining distance during anchoring, supporting the maneuver safely. Analyzes of the distances measured by the sensor were also carried out to evaluate the precision and functioning of the prototype. The results obtained demonstrated the viability of the proposed system, which uses low-cost electronic components to measure and display the distance between the vessel and the docking location. Its implementation offers an affordable alternative to assist in safe navigation in river transport, especially in riverside communities with limited resources. The study also contributed to discussing new applications of technology, aiming to improve water transport in the country.

Measurement of surface rectangular defect depth based on laser-excited transmitted surface waves

ABSTRACT In order to study the effect of laser-excited surface waves on the transmission of surface rectangular defects, the transmission information of surface waves is used to achieve the quantitative calculation of defect depth. In this paper, the finite element method is employed to analyse the transmission process of laser-excited surface waves on rectangular defects. Subsequently, the influence of the front and back edges of rectangular defects on the transmission of surface waves is examined, and the formation mechanisms of feature points in the time-domain signals at detection points are elucidated. Ultimately, the calculation formula for defect depth is derived on the basis of the propagation path of each component after transmission. The experimental results are consistent with the simulation results, and the relative error of the surface rectangular defect depth calculation is within 9%. The validation of the proposed method on homogeneous isotropic metallic materials demonstrates the effectiveness and applicability of the proposed method. These results will provide a reliable method for characterising the depth of rectangular defects on surfaces by laser ultrasonic technology.

Study of the effect of ultrasonic technology on the extraction of bitumen from bituminous rocks

Background: Nowadays, there are few studies focused on the extraction of targeted products from bituminous rocks. Published research on the on the use of ultrasound for bitumen extraction refers to unconventional technologies. A distinctive feature of the bituminous rocks under study is their exposure at the surface, where they are situated in open areas. Due to various technogenic factors and prolonged atmospheric, light fractions are lost, while the heavier components undergo oxidation. These processes lead to the formation of heavy oils and hard bitumens with complex composition. Aim: To study the effect of ultrasonic technology on the bitumen extraction of from bituminous rocks and to determine the physical and chemical properties of the product obtained. Materials and methods: Thу ultrasonic method has many benefits, in particular energy and water savings, high productivity within a short period of time, and possibility of organizing a mobile unit installation at the production site. The main process parameters includes the determination of the required frequency and power depending on the object of ultrasound technology research. The results of the work have demonstrated that ultrasonic cavitation of bituminous rocks in an alkaline medium increases the degree of bitumen extraction. Results: The physical and chemical properties of bitumen obtained as a result of studying the effect of ultrasonic technology on bitumen extraction from oil-bituminous rocks were determined. Conclusion: The study identified the optimal process parameters based on the specific research object. When selecting the ultrasonic power it was found that clay compounds of bituminous rocks have a direct effect on the extraction of natural bitumen. It was demonstrated that ultrasound technology is a promising and industrially applicable technology for extracting bitumen from the bituminous rocks of the Munaily Mola field.

Study on non-destructive visualization identification of concrete internal cracks based on SH array ultrasound

Ultrasonic nondestructive testing (NDT) technology was one of the most frequently used and fastest-developing NDT techniques in detection field. This method had high detection sensitivity, more accurate defect localization, and was harmless to the human body. With the development of ultrasonic testing technology, modern ultrasonic imaging technology generally had automatic data acquisition and processing functions, which allowed for intuitive and clear recognition of internal defects by the human eyes. The overall purpose of this study was to visualize the cracks in concrete by synthetic aperture focusing technique (SAFT) and full-waveform inversion (FWI) algorithms on the basis of ultrasonic nondestructive testing technology. At present, there have been studies on the use of ultrasonic instruments to detect the internal defects of concrete. However, the accuracy and authenticity of this method have not been compared in previous studies. Therefore, in this experiment, four concrete specimens with different buried depths, angles, shapes, and thicknesses of cracks were designed. Based on SH ultrasonic wave NDT technology, two types of operations were performed on the collected ultrasonic wave data: one was the application of SAFT method, and the other was the first application of FWI method for detecting internal cracks in concrete. The study found that both algorithms were most accurate in determining the burial depth of cracks, with error results not exceeding 10 %. They also showed good recognition effects for the angle, shape, and thickness of the buried cracks. This proved that both identification methods had the capability to recognize internal cracks. The Introview software bundled with the ultrasonic instrument could identify cracks using SAFT directly and quickly. When FWI was used with MATLAB computation, the results were more precise and intuitive. The overall purpose of this study was to detect cracks in concrete by SAFT and FWI algorithms on the basis of ultrasonic nondestructive testing technology. Combining the two crack identification techniques could be of great significance for ensuring the long-term safety and stability of concrete structures, providing strong support for structural maintenance and reinforcement.

Suspended Droplets Discharge Characteristics

ABSTRACTThis study investigates discharge phenomena in suspended droplets using needle–needle electrodes. By employing ultrasonic suspension technology for noncontact droplet suspension and high‐speed cameras for capturing time‐resolved discharge images, the study examines the impact of droplets on discharge characteristics and morphology. Results show that droplets alter the electric field distribution, affecting discharge paths. Low‐conductivity droplets hinder discharge, causing deflection or changes in the discharge channel, whereas high‐conductivity droplets act as suspended electrodes, facilitating discharge channel formation, reducing breakdown voltage and shortening the establishment time. Droplets transition from ellipsoid to flat and back during discharge, with high‐conductivity droplets potentially undergoing liquid explosion. These findings are crucial for designing high‐voltage equipment in liquid‐contaminated environments.

Enhancing protein extraction from Pleurotus ostreatus using synergistic pH-shifting and ultrasonic technology: Optimization via RSM and 1H NMR-based metabolomic profiling

This study explores the impact of ultrasound and pH-shifting on protein extraction from P. ostreatus, employing 1H NMR techniques to monitor metabolites and elucidate the extraction mechanism. The NMR-based metabolic analysis demonstrated that extended sonication time significantly boosted amino acid release. To optimize conditions for maximizing protein yield, response surface methodology was performed. This research aims to enhance protein extraction from P. ostreatus by analyzing the interplay between ultrasound treatment and pH-shifting. The results indicate that the synergistic use of pH-shifting and ultrasound-assisted extraction (UAE) significantly improves protein yield. The amino acid profile of the protein concentrates revealed a high content of essential amino acids, with tryptophan identified as the limiting amino acid. Additionally, the combined extraction method enhanced the emulsifying properties and foaming stability of the protein concentrates. Thus, combining pH-shifting and UAE is a promising technique for extracting high-quality protein from P. ostreatus, enhancing functional properties and efficiency.

Comparative Evaluation of Conventional and Emerging Maceration Techniques for Enhancing Bioactive Compounds in Aronia Juice.

Ultrasound and microwave maceration techniques have been utilised to lower production costs and reduce processing time, while also preventing the degradation of nutrients like phenolics and vitamin C and preserving physical properties such as colour and viscosity. In this study, the effects of several traditional (cold, enzymatic, and thermal) and innovative (ultrasonic and microwave) maceration methods on some quality parameters of aronia juice were investigated. Microwave maceration significantly impacted the soluble solids content of the analysed juices and resulted in noticeably darker juice samples compared to the controls, with lower L*/lightness (20.1) and b*/blue-yellowness (-3.2) values and an increased a*/redness value (1.7). Different maceration methods also significantly impacted the rheological properties of the treated juices, among which MW treatment consistently showed a higher viscosity. Sorbitol and fructose were the main sugars identified, while malic acid and quinic acid accounted for 85% of the total acid content. Significant increases in the total sugar and acid concentrations were obtained in the juice samples from ultrasonic, microwave, and enzymatic maceration, while thermomaceration had no significant effect. The concentration of total phenolics ranged from 6.45 g/L in the thermomaceration samples to 9.86 and 14.07 g/L in the ultrasonic and microwave samples, respectively. The obtained results suggest that ultrasonic and microwave technologies were superior in terms of colour improvement and the extraction of sugars, acids, and phenolic compounds compared to traditional maceration methods. Ultrasound and microwave technologies present possible approaches to the improvement of aronia juice production in comparison to traditional methods.