Ultrasonic Irradiation Research Articles

Green synthesis, anti-inflammatory evaluation and molecular docking of novel pyridines via one pot multi-component reaction using ultrasonic irradiation.

In this paper, we present a green application for the synthesis of novel pyridine derivatives 4a-f via one-pot, multicomponent reaction (MCRs) of some aromatic aldehydes 1a-f with malononitrile (2) and N-(4-acetylphenyl)-4-methylbenzenesulfonamide (3) in the presence of ammonium acetate using ultrasonic irradiation (U.S) in an aqueous solvent H2O:EtOH (2:1). The structures of all synthesized pyridines 4a-f were confirmed via elemental analysis and different spectroscopic techniques. This application has many advantages such as avoiding hazardous solvents, excellent yields, inexpensive, simple application, in addition to obtain pure compounds. The anti-inflammatory activity of the newly compounds was examined with the reference drug Ibuprofen. The obtained results showed that most derivatives are promising anti-inflammatory activates. Moreover, compound 4b exhibits the most anti-inflammatory activity with a percentage of inhibition with 51.67% compared with Ibuprofen 53.96%. Furthermore, the newly compounds were studied in their molecular docking simulations against the enzyme Human Cyclooxygenase-2, with Tolfenamic Acid as a reference ligand (PDB ID: 5IKT). Compound 4b demonstrated a robust binding affinity with the target protein 5ikt, evidenced by its binding affinity score of - 11.16 kcal/mol, which is the highest among the studied compounds.

Experimental investigation on the synergetic effect of low salinity water and ultrasonic wave on crude oil flow in porous media

In this study, the synergetic effect of ultrasonic waves and low-salinity water (LSW) on the oil flow in porous media was investigated. In this regard, a series of experiments including oil viscosity measurement, microscopic imaging, interfacial tension (IFT) measurement, and thermal gravimetric (TG) carried out on the crude oil before and after the ultrasonic treatment using a probe-type generator (20 kHz and 100 W). According to the results, ultrasonic waves increased the oil flow rate in porous media by decreasing the oil viscosity and increasing the temperature. Irradiated oil viscosity was reduced by 45% at the optimum time. Ultrasonic wave irradiation caused a 31% reduction in IFT between crude oil and water due to the cracking of large components. Also, the IFT between the LSW and irradiated oil was 51% less than the high-salinity water. The simultaneous use of ultrasonic waves and LSW decreases IFT between the oil and water due to the change in the electric charge and as a result, increases the creation of water-in-oil emulsions. The simultaneous use of ultrasonic waves and LSW is important from environmental and economic points of view including decreasing oil contamination in porous media and increasing oil recovery from rock.

Eco-Friendly Synthesis of Thiazole Derivatives Using Recyclable Cross-Linked Chitosan Hydrogel Biocatalyst Under Ultrasonic Irradiation as Anti-Hepatocarcinogenic Agents

Eco-Friendly Synthesis of Thiazole Derivatives Using Recyclable Cross-Linked Chitosan Hydrogel Biocatalyst Under Ultrasonic Irradiation as Anti-Hepatocarcinogenic Agents

The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component

Additive manufacturing of metallic components often results in the formation of columnar grain structures aligned along the build direction. These elongated grains can introduce anisotropy, negatively impacting the mechanical properties of the components. This study aimed to achieve controlled solidification with a fine-grained microstructure to enhance the mechanical performance of printed parts. Stainless steel 316L was used as the test material. High-intensity ultrasound was applied during the direct energy deposition (DED) process to inhibit the formation of columnar grains. The investigation emphasized the importance of amplitude changes of the ultrasound wave as the system’s geometry continuously evolves with the addition of multiple layers and assessed how these changes influence the grain size and distribution. Initial tests revealed significant amplitude fluctuations during layer deposition, highlighting the impact of layer deposition on process uniformity. The mechanical results demonstrated that the application of ultrasound effectively refined the grain structure, leading to a 15% increase in tensile strength compared to conventionally additively manufactured samples.

One-pot green synthesis, biological evaluation, and in silico study of pyrazole derivatives obtained from chalcones

Abstract Several chalcones and their pyrazole derivatives have been synthesized using traditional methods under microwave (MW) and ultrasonic (US) irradiation. The latter were synthesized using US-assisted and MW-assisted one-pot techniques. The use of this technology led to a reduction in reaction time and energy consumption, as well as an increase in the yield of the final products, which means more efficient synthesis. An in silico study was conducted and the plant growth-stimulating effects of the synthesized compounds were revealed. To study the growth-regulating activity of the synthesized compounds, a study of aqueous suspensions at a concentration of 50 and 25 mg·L−1 was carried out on the viability, germination, and growth of seeds.

BIOCIDAL PROPERTIES OF CUONANOPARTICLES

Biocides are products used to prevent or control the spread of various harmful organisms such as bacteria or viruses. Silver and gold nanoparticles are mostly used as active substances of biocides used in the medical field. However, a more economically acceptable alternatives are different copper compounds, specificallycopper(II) oxide. CuO nanoparticles were gained via sonicationmethod from copper(II) acetate in a sodium hydroxide solution. Physical and chemical properties of gained CuO nanoparticles were investigated by X-ray diffraction analysis (XRD), energy dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA)and atomic force microscopy (AFM). Biocidal tests were performed on bacteria Pseudomonas aeruginosaand Bacillus subtilis,as well on fungi Candida albicansand Aspergillus nigerusing the disc diffusion method. The ultrasonic irradiation method was found to yield pure CuO nanoparticles smaller than 70 nm. Also, EDS measurement verified the stoichiometric distribution of copper and oxygen in the sample.Antimicrobialproperties were proven excellent for both bacteria and fungiexcept for Pseudomonas aeruginosa,for which CuO nanoparticles seem to have low effect. KEYWORDS:copper(II) oxide; sonication; antimicrobialproperties

Enhanced Electrochemical Performance of Highly Porous CeO2-Doped Zr Nanoparticles for Supercapacitor Applications.

The aim of this work was to develop an ultrasonic-assisted synthesis method for the fabrication of CeO2-doped Zr nanoparticles that would improve the performance of supercapacitor electrodes. This method, which eliminates the need for high-temperature calcination, involves embedding CeO2 into Zr nanoparticles through 1 hr (CeO2-Zr-1) and 2 hrs (CeO2-Zr-2) of ultrasonic irradiation, resulting in the formation of nanostructures with significant improvements in their electrochemical properties. Through physicochemical analysis, we observed that the CeO2-doped Zr nanoparticles, particularly those treated for 2 hrs (CeO2-Zr-2), exhibit superior crystalline phase purity, optimal chemical surface composition, minimal agglomeration with particle sizes below 50 nm, and an impressive average surface area of 178 m2/g. Compared to the 1 hr irradiation samples (CeO2-Zr-1) and undoped CeO2 nanoparticles, the (CeO2-Zr-2) electrodes demonstrated a remarkable capacitance of 198 Fg-1 at a current density of 1 A/g while maintaining ~94.9% of their capacity after 3750 cycles. This indicates not only good reversibility but also exceptional stability. In (CeO2-Zr-2) samples, the nanospherical structure achieved through ultrasonic synthesis is responsible for the enhanced capacitive behavior and stability, along with the synergistic effects caused by Zr doping, which improves the CeO2 nanoparticle conductivity to a significant extent. Surface areas of the electrodes are larger due to the combination of these two materials, which contribute to their superior performance.

Engineering Strain-Defects to Enhance Enzymatic Therapy and Induce Ferroptosis.

The effect of mimetic enzyme catalysis is often limited by insufficient activity and a single therapy is not sufficient to meet the application requirements. In this study, a multifunctional nanozyme, MMSR-pS-PEG, is designed and fabricated by modifying poly (ethylene glycol) grafted phosphorylated serine (pS-PEG) on mesoporous hollow MnMoOx spheres, followed by loading sorafenib (SRF) into the pores. Strain engineering-induced oxygen defects endow the nanozyme with enhanced dual-enzymatic activity to mimic catalase and oxidase-like activities, which catalyze the conversion of endogenous H2O2 into oxygen and subsequently into superoxide ions in the acidic tumor microenvironment. Moreover, as an n-type semiconductor, MnMoOx generates reactive oxygen species by separating electrons and holes upon ultrasonic irradiation and simultaneously deplete glutathione by holes, thereby further augmenting its catalytic effect. As a ferroptosis inducer, SRF restrains the system xc - and indirectly inhibits glutathione synthesis, synergistically interacting with the nanozyme to stimulate ferroptosis by promoting lipid peroxidation and accumulation and the downregulation of glutathione peroxidase 4. These results provide valuable insights into the design of enzymatic therapy with high performance and highlight a promising approach for the synergism of ferroptosis and enzymatic tumor therapy.

The influence of cavitation radicals on the suspension polymerization of n‐butyl methacrylate during ultrasonic emulsification

AbstractThe influence of cavitation‐generated free radicals on the suspension polymerization of n‐butyl methacrylate under ultrasonic irradiation was investigated experimentally and by kinetic modeling. A kinetic model of radical polymerization was proposed, considering the interaction of free radicals generated in cavitation bubbles with both monomer molecules and free radicals formed within the monomer droplets. It was found that the primary contribution to the polymerization acceleration come from cavitation radicals generated inside the monomer droplets, whereas the impact of cavitation radicals formed in the dispersion medium decreases as the fraction of monomer in the mixture decreases. Increasing the concentration of cavitation radicals was shown to lead to a reduction in the average chain length and the dispersity of terminated chains. It was demonstrated that the computational results are in good agreement with experimental data.Highlights Kinetic model for suspension polymerization in ultrasonic field is proposed. Impact of cavitation radicals on suspension polymerization kinetics is studied. Chain length and dispersity decrease with increasing amount of cavitation radicals.

Impregnation of wood with water using ultrasonic irradiation and water containing bulk nanobubbles

Impregnation of wood with water using ultrasonic irradiation and water containing bulk nanobubbles

Green biogenic synthesis of magnetite nanoparticles from indigenous Banksia Ashbyi leaf for enhanced sonochemical dye degradation

Abstract Developing alternative green and sustainable technologies to prevent, reduce, and remove toxic dyes present in effluent generated by the textile industry is of global importance. In this study, magnetite (Fe3O4) nanoparticles (MNPs) were successfully synthesized using a co-precipitation method that used Indigenous Banksia Ashbyi (BA) leaf extract in varying amounts (BA-MNP 1 to BA-MNP 4), to modulate particle size and size distribution. The formation of the MNPs was confirmed by a range of characterization techniques that included UV–visible spectrophotometry, Fourier transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD) spectroscopy, thermo-gravimetric analysis (TGA) and scanning (FIBSEM) and high-resolution transmission (HRTEM) electron microscopy. The presence of the Fe–O bond located at 551 cm−1 in the FTIR spectra and XRD analysis of the samples confirmed the formation of crystalline MNPs. FIBSEM and HRTEM images of the BA-MNP 4 sample confirmed the MNPs were spherical (18 ± 5 nm) and tended to agglomerate. Moreover, UV–visible spectrophotometry revealed a board absorption band and an optical band-gap energy of 2.65 eV. The catalytic activity of BA-MNP 4 samples towards the degradation of a commercially available navy-blue RIT dye (BRD) were investigated under three operational senarios: 1) ultrasonic irradiation (US) + BRD; 2) BA-MNP 4 + BRD, and 3) US + BRD + BA-MNP 4. The investigation found there was an additive effect when US (80 W) was used in conjunction with BA-MNP 4 s during the dye degradation process. With no US, the BA-MNP 4 sample only achieved a dye degradation of 52% in 25 min. However, over the same period of time with US, the BA-MNP 4 sample achieved a dye degradation of 89.92%. In addition, kinetic modelling found the combined US and BA-MNP 4 process followed a pseudo-first-order kinetic model.

Temperature and Ultrasound-Responsive Nanoassemblies for Enhanced Organ Targeting and Reduced Cardiac Toxicity.

Biocompatible nanocarriers are widely employed as drug-delivery vehicles for treatment. Nevertheless, indiscriminate drug release, insufficient organ-specific targeting, and systemic toxicity hamper nanocarrier effectiveness. Stimuli-responsive nano-sized drug delivery systems (DDS) are an important strategy for enhancing drug delivery efficiency and reducing unexpected drug release. This study introduces a temperature- and ultrasound-responsive nano-DDS in which the copolymer p-(MEO2MA-co-THPMA) is grafted onto mesoporous iron oxide nanoparticles (MIONs) to construct an MPL-p nano-DDS. The copolymer acts as a nanopore gatekeeper, assuming an open conformation at sub-physiological temperatures that allows drug encapsulation and a closed conformation at physiological temperatures that prevents unexpected drug release during circulation. Lactoferrin was conjugated to the nanoparticle surface via polyethylene glycol to gain organ-targeting ability. External ultrasonic irradiation of the nanoparticles in the targeted organs caused a conformational change of the copolymer and reopened the pores, facilitating controlled drug release. MPL-p exhibited excellent biocompatibility and rare drug release in circulation. When targeting delivery to the brain, ultrasound promoted the release of the loaded drugs in the brain without accumulation in other organs, avoiding the related adverse reactions, specifically those affecting the heart. This study established a novel temperature- and ultrasound-responsive DDS that reduced systemic adverse reactions compared with traditional DDS, especially in the heart, and demonstrated excellent organ delivery efficiency.

Sonochemical post-synthesis modification of Y zeolite with iron species

Faujasite is a zeolite that, when in a Y structure, is widely used as a catalyst to produce fuel by fluid catalytic cracking (FCC) and is recently being investigated for applications in sustainable processes. Hence, there is an increased interest in modifying Y zeolites with metals such as Fe to improve and optimize their catalytic properties. Several post-synthesis methods such as chemical vapor deposition, impregnation and ion exchange have been explored for the introduction of Fe. Nevertheless, these currently developed methods can be time-consuming and unable to selectively tune the Fe species. Therefore, this study explores the use of ultrasonic irradiation in a liquid state modification of a Fe-exchanged Y zeolite (FeY) in a buffer solution with different pH values (5 and 9) and oxidation states of Fe ions (ferrous and ferric) for the introduction of Fe species. At the tested ultrasonic modification conditions, the zeolitic structure was preserved with slight Si/Al ratio and pore structure adjustments in correlation with the introduced Fe species (ions, hydroxides and oxides). Setting the sonochemical method as a potential path for the search of reaction conditions for the design and fabrication of Fe-modified zeolitic materials with tuned properties for a wide range of applications.

Dual-functional MnS nanomaterials: Efficient adsorbent for phosphate removal and sonocatalyst for textile dye degradation

Naturally abundant, environmentally friendly alternatives for replacing the expensive lanthanum-based phosphate removal technique are sought after. Solocatalysis is an emerging area for water remediation. This study introduces a dual-functional MnS nanomaterial for removing phosphate ions and Congo Red textile dye. MnS nanomaterials were synthesized via a hydrothermal route. Batch adsorption experiments revealed a phosphate adsorption capacity of 160.73 mg P/g, commendable for adsorbent in its bare form. Thermodynamic parameters of the process indicated a spontaneous, exothermic process, confirming favourable adsorption. FTIR analysis confirmed the adsorption mechanism, which includes electrostatic attraction, surface complexation, and ion exchange. MnS maintained its adsorption capacity despite competing ions, demonstrating a selective affinity for phosphate ions. MnS showed high sonocatalytic efficiency, degrading Congo Red dye within 10 min of ultrasonic irradiation. The degradation mechanism of Congo Red dye in the sonocatalytic process is proposed. This novel metal chalcogenide material exhibits exceptional affinity for phosphate ions and Congo Red dye molecules, surpassing La-based adsorbents in efficacy. The results suggest that MnS nanomaterials are promising for practical applications in phosphate removal and textile dye degradation from wastewater.

Versatile Bi2MoO6/Prussian Blue-Au nanoplatform for oxygen-self-produced and GSH-depleted enhanced sonodynamic efficacy

Deprivation of oxygen and scavenging of reactive oxygen species (ROS) severely restrict the antitumor efficiency of sonodynamic therapy (SDT). To address these challs, we report the Bi2MoO6/Prussian Blue-Au (BMO/PB-Au) nanosystem as piezoelectric sonosensitiser for highly efficient ROS production under ultrasonic irradiation. In this system, the nanosystem has catalase-like (CAT) and glutathione oxidase (GSHOD) catalytic activity, which can enhance SDT effectively by producing reactive oxygen species and consuming glutathione (GSH). While the narrow bandgap and heterojunctions contribute to the improved charge separation and charge recombination suppression of the piezoelectric semiconductor BMO, accelerating ROS generation. Packaging MCF-7 cancer cell membranes (CM) on the surface of BMO/PB-Au will effectively improve the enrichment of nanoparticles in tumor tissue. The in vivo results showed that the BMO/PB-Au@CM nanoplatform can effectively inhibit tumor growth through the enhanced SDT effect. Our findings provide a paradigm to rationally design hypoxia-relieve and GSH-depleted SDT platform to for promoting cancer therapy efficiency.

The effect of ultrasonic waves on the structure, morphology, and thermal conductivity of graphene oxide as nanofluids for direct absorption solar collector application

This research aims to explore how ultrasonic waves affect the structure and morphology of graphene oxide (GO) as a nanofluid, influencing its thermal conductivity (TC), stability, and photo-thermal conversion properties. GO was rapidly synthesized under ultrasonic bath irradiation using modified and improved Hummers' methods. Ultrasonic irradiation creates different structural and morphological defects in the GO that depend on the sonication time. The relationship between the exposure time to ultrasound and the creation of structural and morphological defects in graphene oxide nanosheets was investigated using UV–Vis, FTIR, Raman spectroscopies, AFM, and TEM analysis. The study examined how the structure and morphology of graphene oxide nanosheets affect the thermophysical and photo-thermal conversion properties of nanofluids by comparing heat transfer and stability. The simultaneous characterizing of the structure and morphology indicates that TC and stability are related to the sonication time. Indirect sonication with low intensity can carefully control the oxidation reaction of GO. Sonication for 30 min creates GO nanosheets that yield stable nanofluids with a 32.31 % enhancement in TC, with no extra treatment needed. This particular nanofluid has excellent photo-thermal conversion properties thanks to its high optical absorption, good stability, and thermal conductivity. This can increase the solar-thermal conversion efficiency (η) up to 72.5 %, making it a promising candidate for use as the working fluid in direct absorption solar collectors (DASCs)

Optimising Nanoparticle Dispersion Time for Enhanced Thermomechanical Properties in DGEBA-Based Shape Memory Polymer Composites

Shape-memory polymers (SMPs) are smart materials that can change shape upon an external stimulus. This phenomenon is called the shape memory effect (SME), which is caused by entropy change due to rapid molecular motion in the polymer segments. Due to the inherently weak thermomechanical properties, use of SMPs is limited in many engineering applications. Therefore, SMPs are often reinforced with fibres and nanoparticles (NPs). NPs offered greater flexibility due to their superior physical, chemical, electrical, mechanical, and thermal properties. However, the homogeneous distribution of NPs is crucial for composition’s stability and enhancement of the base material’s properties. Among the different techniques used for dispersing NPs, ultrasonic irradiation has shown excellent emulsifying and crushing performance. The sonication process is essential for mitigating agglomerates; however, prolonged sonication time probably increases epoxy temperature, micro-bubbles, cavitation, breaking apart molecules and finally degrading the epoxy resin performances. This paper provides critical insight of nanoparticle dispersion into diglycidyl ether of bisphenol A epoxies (DGEBA). DGEBA epoxy resin was added to TiO2 NPs and sonicated for 60 min with 5 min intervals while the temperature of epoxy was maintained below 60oC by using a water cooling throughout the sonication process. The process parameters such as amplitude, mode, epoxy volume and the weight percentage of NPs were kept constant. After each sonication step, Fourier-transform infrared spectroscopy (FTIR) was performed using Thermo Scientific™ and analysed through OMNIC™ Professional quantitation software. In accordance with FTIR results, until 30 min of the sonication, DGEBA resin was not degraded. In order to confirm the performances and the reinforcing effect of NPs, thermo-mechanical and shape memory properties were compared with the neat specimen. The outcomes of this research have suggested quick guidance to find optimum NP dispersion time for DGEBA resins, which has been hardly studied before.

Efficient Catalytic Production of Reactive Oxygen Species through Piezoelectricity in Bismuth Sulfide Rich in Sulfur Vacancies.

Sulfur (S) vacancies in metal sulfides are of interest in electrocatalysis and photoelectronics, but their effect on the generation of reactive oxygen species (ROS) during mechanical catalysis is unclear. This study investigates the impact of S-vacancies in defective bismuth sulfide (Bi2S3-x) on ROS production under ultrasonic irradiation and organic contaminant decomposition. S-vacancies disrupt the centrosymmetric structure of intrinsic Bi2S3, inducing piezoelectric effects and enhancing the electrical energy in Bi2S3-x. The positively charged S-vacancies in Bi2S3-x promote the separation of ultrasound-activated electron-hole pairs by capturing electrons. As a result, the optimal rate of H2O2 formation and the reaction rate constant for degrading Rhodamine B dye on Bi2S3-x are found to be 1.9 and 37 times higher, respectively, than those on Bi2S3 under ultrasonic irradiation. The nonzero catalytic efficiency in centrosymmetric Bi2S3 is due to the flexoelectric catalytic effect from nonuniform strain. These results guide the piezocatalyst design and elucidate mechanical catalysis mechanisms.

Eliminating interface shielding effect endowed by piezoelectric polarization in S-scheme heterojunction for high-efficiency H2 evolution

Eliminating the interface shielding effect within step-scheme (S-scheme) heterojunctions which can attenuate the separation driving force of built-in electric field plays a vital role in enhancing the photocatalytic performance. Herein, an extra driving force induced by piezoelectric field is introduced to mitigate such predicament in S-scheme, thereby facilitating the charge separation. Specifically, the piezoelectric CuInS2-BiFeO3 S-scheme heterojunction which with powerful piezoelectric field endowed by the piezoelectric BiFeO3 is constructed via a facile electrostatic self-assembly strategy and served as the touchstone to verify that hypothesis. The direction of built-in field between the heterojunction interface that is orienting from CuInS2 to BiFeO3 has been confirmed by in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance. Furthermore, the obviously piezo-field at the interface of CuInS2-BiFeO3 which can tilt energy band to enhance the built-in field under external force is also revealed by piezoresponse force microscopy. Consequently, benefiting from the highly-efficient charge separation offered by the synergy of piezoelectric field and S-scheme built-in electric field, a remarkably H2 production rate of 1465.1 µmol/g is achieved under simultaneous visible light and ultrasonic vibration irradiation. This work sheds light on the role of external field in enhancing the efficient separation of carriers in S-scheme heterojunctions.

Eco‐friendly ultrasonic‐assisted appraisal of herbal‐based yellow natural colorant for silk dyeing

AbstractThe global recognition of eco‐friendly products like plant‐based dyes is escalating, driven by their exceptional biological and Ayurvedic attributes. This study isolates colorants from mango turmeric (Curcuma aromatica) using ultrasonic irradiation, supplemented with bio‐mordants to enhance color retention. Through the utilization of Response Surface Methodology and Central Composite Design, a technique that was optimized was completed to maximize coloring variables using statistical analysis. Results from 32 experimental runs reveal that optimal color depth (K/S = 19.399) was achieved with ultrasonic‐treated silk fabric (20 min exposure) using 65 mL of irradiated aqueous extract (20 min) with a pH of 5, supplemented with 1.5 g/100 mL salt of sodium chloride, maintained the temperature 75°C for the 45 min. Precoloring treatment with acacia, pomegranate, and pistachio extracts at specified concentrations enhanced colorfastness. Postdyeing, alterations in the concentrations of these extracts led to further improvements in colorfastness. Notably, adding Al+3 and Fe+2 salts, alongside tannic acid, exhibited notable effects in both pre‐ and postdyeing stages. While the colorfastness properties of unmordated silk fabric was lower than mordanted dyed silk fabric. Irradiation with ultrasonic waves significantly boosted the amount of dye that could be extracted from rhizomes of mango turmeric. Moreover, the application of bio and synthetic mordants in a strategic manner led to colorfastness ratings on silk fabric that ranged from excellent to satisfactory. This research underscores ultrasonic technologies and bio‐mordants' efficacy in sustainable dyeing processes, offering insights for developing eco‐friendly textile coloration methods.