Ultra-high Performance Supercritical Fluid Research Articles

An orthogonal approach for analysis of underivatized steroid hormones using ultrahigh performance supercritical fluid chromatography-mass spectrometry (UHPSFC-MS).

The crucial role of steroid hormones in health and diseases merits their high-throughput, accurate and affordable measurements in biological specimens. Despite advances in analytical methods, sensing and quantifying steroid hormones remains challenging. Immunoassays offer excellent sensitivity but are inherently labour-intensive, costly, and prone to false positives. Mass spectrometry (MS) has been increasingly utilised, with the main hurdle being the isobaric tendencies of similar analytes, which complicates their separation and accurate quantification. This study compares ultrahigh-performance supercritical fluid chromatography separation (UHPSFC) and ultra-high-performance liquid chromatography (UHPLC) for MS detection. It optimises the column chemistry, temperature, and pressure to provide an operational protocol for the resolution and quantification of analytes. It presents the systematic characterisation of UHPSFC-MS performance by investigating spiked blood samples using Solid-Phase Extraction (SPE) and describes the matrix effects associated with MS measurements. Although both separation methods showed adequate resolution, specificity, and retention time, UHPSFC-MS was superior for five out of seven columns tested. With added high-throughput capacities, UHPSFC-MS, thus, offers an optimal solution for the analysis of steroid hormones for research, medical chemistry, and clinical diagnostics.

Rapid Determination of Trace Ethylene Glycol and Diethylene Glycol in Propylene Glycol-Contained Syrups by Ultrahigh-Performance Supercritical Fluid Chromatography-Mass Spectrometry after Precolumn Derivatization

Ethylene glycol (EG) and diethylene glycol (DEG) are two contaminants known to cause a variety of human health problems, when ingested in certain amounts, they can cause adverse effects such as nephrotoxicity, neurotoxicity and even death. They are widely found in propylene glycol, which is commonly used as a base for pharmaceutical syrups. The aim of this study was to develop an analytical method for the evaluation of EG and DEG in commercially available pediatric syrups. In this study, a fast, simple and reliable ultrahigh performance supercritical fluid chromatography-electrospray ionization-mass spectrometry (UHPSFC-ESI-MS) method was developed. The work involved the evaluation of three derivatization reagents for UHPSFC-ESI-MS. Benzoyl chloride was finally selected as the optimal derivatization reagent. Compared with an approach without derivatization, the present method achieved the separation and detection of EG and DEG efficiently, sensitively and rapidly, and analysis of EG and DEG in syrup formulations was realized within 7 min. The linear determination coefficients of EG and DEG in the concentration range of 0.25–25.0 μg/mL were greater than 0.999. The limits of detection for EG and DEG were 0.02 μg/mL and 0.07 μg/mL, respectively, and the limits of quantification were 0.09 μg/mL and 0.25 μg/mL, respectively. The recovery rates of DEG and EG ranged from 85.5%–108.1% and 86.7%–117.2%, respectively. The absolute values of the matrix effects in the three types of syrups considered were all less than 10%. Meanwhile, a gas chromatography-hydrogen flame ionization detection method was established for cross-testing of the analytical results. In 10 batches of syrup formulations, DEG was not detected by either method. The presence of EG was detected by UHPSFC-ESI-MS in only three batches, none of which exceeded 90.23 parts per million (ppm), with a mean absolute error of 5.95 ppm between the two sets of results. The developed UHPSFC-ESI-MS method was rapid, simple, efficient, sensitive and accurate for the determination of EG and DEG in genuine syrup formulations.

Ultrahigh-Performance Supercritical Fluid Chromatography-Mass Spectrometry in the Clinical Lipidomic Analysis.

Ultrahigh-performance supercritical fluid chromatography-mass spectrometry (UHPSFC/MS) method is optimized for the high-throughput quantitation of lipids in human serum and plasma with an emphasis on robustness and accurate quantitation. Bridged ethylene hybrid (BEH) silica column (100×3mm; 1.7μm) is used for the separation of 17 nonpolar and polar lipid classes in 4.4min using the positive ion electrospray ionization mode. The lipid class separation approach in UHPSFC/MS results in the coelution of all lipid species within one lipid class in one chromatographic peak, including two exogenous internal standards (IS) per lipid class, which provides the optimal conditions for robust quantitation. The method was validated according to European Medicines Agency and Food and Drug Administration recommendations. UHPSFC/MS combined with LipidQuant software allows a semiautomated process to determine lipid concentrations with a total run time of only 8min including column equilibration, which enables the analysis of 160 samples per day.

Matrix effects in ultra-high performance supercritical fluid chromatography-mass spectrometry analysis of vitamin E in plasma: The effect of sample preparation and data processing

The approaches to matrix effects determination and reduction in ultra-high performance supercritical fluid chromatography with mass spectrometry detection have been evaluated in this study using different sample preparation methods and investigation of different calibration models. Five sample preparation methods, including protein precipitation, liquid-liquid extraction, supported liquid extraction, and solid phase extraction based on both “bind and elute” and “interferent removal” modes, were optimized with an emphasis on the matrix effects and recovery of 8 forms of vitamin E, including α-, β-, γ-, and δ-tocopherols and tocotrienols, from plasma. The matrix effect evaluation included the use and comparison of external and internal calibration using three models, i.e., least square with no transformation and no weighting (1/x0), with 1/x2 weighting, and with logarithmic transformation. The calibration model with logarithmic transformation provided the lowest %-errors and the best fits. Moreover, the type of the calibration model significantly affected not only the fit of the data but also the matrix effects when evaluating them based on the comparison of calibration curve slopes. Indeed, based on the used calibration model, the matrix effects calculated from calibration slopes ranged from +92% to – 72% for α-tocopherol and from −77% to +19% in the case of δ-tocotrienol. Thus, it was crucial to calculate the matrix effect by Matuszewski's post-extraction approach at six concentration levels. Indeed, a strong concentration dependence was observed for all optimized sample preparation methods, even if the stable isotopically labelled internal standards (SIL-IS) were used for compensation. The significant differences between individual concentration levels and compounds were observed, even when the tested calibration range covered only one order of magnitude. In methods with wider calibration ranges, the inappropriate use of calibration slope comparison instead of the post-extraction addition approach could result in false negative results of matrix effects. In the selected example of vitamin E, solid-phase extraction was the least affected by matrix effects when used in interferent removal mode, but supported liquid extraction resulted in the highest recoveries. We showed that the calibration model, the use of a SIL-IS, and the analyte concentration level played a crucial role in the matrix effects. Moreover, the matrix effects can significantly differ for compounds with similar physicochemical properties and close retention times. Thus, in all bioanalytical applications, where different analytes are typically determined in one analytical run, it is necessary to carefully select the data processing in addition to the method for the sample preparation, SIL-IS, and chromatography.

Circulating adrenal and gonadal steroid hormones heterogeneity in active young males and the contribution of 11-oxy androgens

The classical androgens, testosterone and dihydrotestosterone, together with dehydroepiandrosterone, the precusrsor to all androgens, are generally included in diagnostic steroid evaluations of androgen excess and deficiency disorders and monitored in androgen replacement and androgen suppressive therapies. The C11-oxy androgens also contribute to androgen excess disorders and are still often excluded from clinical and research-based steroids analysis. The contribution of the C11-oxy androgens to the androgen pool has not been considered in androgen deficiency. An exploratory investigation into circulating adrenal and gonadal steroid hormones in men was undertaken as neither the classical androgens nor the C11-oxy androgens have been evaluated in the context of concurrent measurement of all adrenal steroid hormones. Serum androgens, mineralocorticoids, glucocorticoids, progesterones and androgens were assessed in 70 healthy young men using ultra high performance supercritical fluid chromatography and tandem mass spectrometry. Testosterone, 24.5 nmol/L was the most prominent androgen detected in all participants while dihydrotestosterone, 1.23 nmol/L, was only detected in 25% of the participants. The 11-oxy androgens were present in most of the participants with 11-hydroxyandrostenedione, 3.37 nmol, in 98.5%, 11-ketoandrostenedione 0.764 in 77%, 11-hydroxytestosterone, 0.567 in 96% and 11-ketotestosterone: 0.440 in 63%. A third of the participants with normal testosterone and comparable 11-ketotestosterone, had significantly lower dehydroepiandrosterone (p < 0.001). In these males 11-hydroxyandrostenedione (p < 0.001), 11-ketoandrostenedione (p < 0.01) and 11-hydroxytestosterone (p < 0.006) were decreased. Glucocorticoids were also lower: cortisol (p < 0.001), corticosterone (p < 0.001), cortisone (p < 0.006) 11-dehydrocorticosterone (p < 0.001) as well as cortisol:cortisone (p < 0.001). The presence of dehydroepiandrosterone was associated with 16-hydroxyprogesterone (p < 0.001), which was also significantly lower. Adrenal and gonadal steroid analysis showed unexpected steroid heterogeneity in normal young men. Testosterone constitutes 78% of the circulating free androgens with the 11-oxy androgens abundantly present in all participants significantly contributing 22%. In addition, a subset of men were identified with low circulating dehydroepiandrosterone who showed altered adrenal steroids with decreased glucocorticoids and decreased C11-oxy androgens. Analysis of the classical and 11-oxy androgens with the additional measurement of dehydroepiandrosterone and 16-hydroxyprogesterone may allow better diagnostic accuracy in androgen excess or deficiency.

Quantitative determination of R/S-methadone in human serum using ultra-high performance supercritical fluid chromatography-tandem mass spectrometry: A method for routine use.

Methadone has two enantiomers, which exhibit differences in pharmacological effects, with R-methadone being the active and S-methadone the inactive enantiomer. A robust, simple and rapid method for chiral separation of the two enantiomers in serum samples using ultra-high performance supercritical fluid chromatography-tandem mass spectrometry (UHPSFC-MSMS) has been developed and validated. Enantiomeric separation was achieved using a Chiralpak IH-3 column with a mobile phase consisting of CO2 and 30mM ammonium acetate in methanol/water (98/2, v/v). Runtime was 4minutes. Sample preparation was semi-automated using a Hamilton ML Star robot with protein precipitation, and phospholipid removal was carried out using a Waters OSTRO™ 96-well plate. The calibration range was 50.0-1,500 nM for each enantiomer. The between-assay relative standard deviations were in the range of 1.2-3.6%. Matrix effects ranged from 99% to 115% corrected with internal standard. The method has been implemented in our laboratory and has proven to be a robust and reliable method for determining the ratio of R/S-methadone in authentic patient samples.

Analysis of vitamin D and its metabolites in biological samples – Part I: Optimization and comparison of UHPSFC-MS/MS and UHPLC-MS/MS methods

Fat-soluble vitamin D is an essential bioactive compound important for human health. Insufficient vitamin D levels can result not only in bone disease but also in other disorders, such as cancer, metabolic disorders, and diseases related to poor immune function. The current methods commonly used for vitamin D analysis are often applied to determine the levels of the most abundant metabolite in plasma, i.e., 25-OH-D2/D3. These methods do not consider the presence of other hydroxylated and esterified metabolites, including isomers and epimers, which are typically found in low concentrations.In this study, we developed a fast and selective ultra-high performance supercritical fluid chromatography (UHPSFC) method using a 150 mm long 1-amino anthracene (1-AA) column and a mobile phase consisting of carbon dioxide and methanol/isopropanol (1/1, v/v) mixed with 8 % water. After thorough optimization of column temperature and back pressure, the separation of four vitamin D3 esters, vitamin D3 and D2, and eight mono- and di-hydroxylated metabolites, including three groups of isomers, was achieved in 10 min. Two ion sources, atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization optimized within this study, were compared in tandem mass spectrometry (MS/MS) detection. No significant sensitivity differences were observed. Subsequently, the same 1-AA column chemistry was examined in ultra-high performance liquid chromatography (UHPLC) as the stationary phase that could hypothetically bring different selectivity in the separation of vitamin D and its metabolites. However, this hypothesis was rejected, and C18 was used as a stationary phase in the final optimized UHPLC-MS/MS method. Despite detailed optimization, the final 15 min UHPLC method was not able to separate di-hydroxylated isomers of vitamin D3, while it enabled better resolution of esterified forms compared to UHPSFC.Optimized methods provided similar repeatability of retention times and peak areas, with RSD < 2 % and 10 %, respectively. The lowest limits of quantification were in the range of 1.2 – 4.9 ng/mL for UHPSFC-APCI-MS/MS, while for UHPLC-APCI-MS/MS, they were typically in the range of 2.6 – 9.6 ng/mL. Based on the obtained results, the UHPSFC-APCI-MS/MS method was the most promising approach for fast, selective, and sensitive analysis that could be applied in the analysis of biological samples with emphasis on the separation of both hydroxylated and esterified metabolites, including isomeric forms.

Analysis of vitamin D and its metabolites in biological samples – Part II: Optimization of a sample preparation method for liver tissue

Extraction of vitamin D, including its hydroxylated and esterified metabolites, from soft tissues such as the liver is challenging due to the lipophilic character of matrix and analytes that are expected in very low concentration levels.In this study, we aimed at the optimization of two-step extraction using solid–liquid extraction as the first step, followed by solid-phase extraction. Various solvents, including ethanol, acetonitrile, methanol, acetone, heptane, and heptane with isopropanol, were investigated to isolate vitamin D compounds from liver tissue in the first step. Acetone was finally selected as the most suitable solvent for the solid–liquid extraction, with the highest recovery in the range of 67 – 98% for polar hydroxylated forms and 3 – 28% for lipophilic vitamin D and esters. Two solid phase extraction (SPE) based on the (i) “bind and elute strategy” and (ii) “removal strategy” using hydrophilic-lipophilic balanced SPE sorbent were optimized as a proceeding step for acetone extracts to increase the method selectivity. Finally, two optimized methods, combining solid–liquid extraction and individual SPE strategy, were examined in terms of sensitivity, recovery, matrix effect, accuracy, and precision.The limits of quantification were in the range of 1 – 10 ng/mL and 3 – 20 ng/mL analyzed by ultra-high performance supercritical fluid chromatography and ultra-high performance liquid chromatography hyphenated a with tandem mass spectrometer, respectively. The absolute recovery determined for the “bind and elute strategy” protocol was in the range of 3 – 24 %. Nevertheless, this method was free of matrix effects, which were determined to be in the 73 – 120 % range. On the contrary, the “removal strategy” approach provided higher recovery values for all compounds (47 – 123 %), but the results for nonpolar vitamin D and esters were strongly affected by signal suppression (matrix effects 3 – 51 %). Both methods fulfilled the criteria for accuracy and precision requested by the European Medicine Agency Guideline on Bioanalysis.“Removal strategy” SPE with decreased manual intervention and lower solvent consumption was finally applied to mouse liver tissue to determine vitamin D and its hydroxylated and esterified metabolites for the first time. The results, i.e., vitamin D esters detected in liver tissue, supported the notion that esters of vitamin D can be stored in lipophilic tissues to release vitamin D.

Ultrahigh-Performance Supercritical Fluid Chromatography-Multimodal Ionization-Tandem Mass Spectrometry as a Universal Tool for the Analysis of Small Molecules in Complex Plant Extracts.

Complex analysis of plant extracts usually requires a combination of several analytical approaches. Therefore, in this study, we developed a holistic two-injection approach for plant extract analysis, which is carried out within one instrument without the need for any manual intervention during the analysis. Ultrahigh-performance supercritical fluid chromatography (UHPSFC) was employed for the analysis of 17 volatile terpenes on a porous graphitic carbon column within 7.5 min, followed by analysis on short diol column where flavonoids, phenolic acids, and terpenoic acids were analyzed within 15.5 min. A multimodal ionization source combining electrospray and atmospheric pressure chemical ionization (ESCi) was selected for mass spectrometry detection as a simultaneous ionization of both lipophilic and polar compounds was required. The quantitative aspects of the final UHPSFC-ESI/ESCi-MS/MS two-injection approach were determined, and it was applied to the analysis of Eucalyptus sp. extracts prepared by supercritical fluid extraction. Current methods reported in the literature typically require a labor-intensive combination of liquid and gas chromatography for the complex analysis of plant extracts. We present for the first time a new UHPSFC approach requiring only a single instrument that provides an alternative approach to the analysis of complex plant extracts.

Rapid profiling of cytokinins using supercritical fluid chromatography coupled with tandem mass spectrometry

BackgroundThe determination of plant hormones is still a very challenging analytical discipline, mainly due to their low concentration in complex plant matrices. Therefore, the involvement of very sensitive high-throughput techniques is required. Cytokinins (CKs) are semi-polar basic plant hormones regulating plant growth and development. Modern methods for CK determination are currently based on ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS), which enables the separation of CK isomeric forms occurring endogenously in plants. Here, ultra-high performance supercritical fluid chromatography coupled with tandem mass spectrometry (UHPSFC-MS/MS) was used for the simultaneous determination of 37 CK metabolites. ResultsThe chromatographic conditions were tested on three different columns with various retention mechanisms. Hybrid silica modified with 2-picolylamine was selected as the stationary phase. Several parameters such as column temperature, back pressure regulation, mobile phase composition and make-up solvent were investigated to achieve efficient separation of CK isomers and reasonable sensitivity. Compared to UHPLC-MS/MS, a 9-min chromatographic analysis using a mobile phase of supercritical CO2 and 5 mM ammonia in methanol represents a three-fold acceleration of total run time. The quantification limit of UHPSFC-MS/MS method was in the range of 0.03–0.19 fmol per injection and the method validation showed high accuracy and precision (below 15 % for most analytes). The method was finally applied to the complex plant matrix of the model plant Arabidopsis thaliana and the obtained profiles of CK metabolites were compared with the results from the conventional UHPLC-MS/MS method. SignificanceThe presented work offers a novel approach for quantification of endogenous CKs in plants. Compared to the conventional UHPLC-MS/MS, the total run time is shorter and the matrix effect lower for the key CK metabolites. This approach opens the opportunity to utilize UHPSFC-MS/MS instrumentation for targeted plant hormonomics including other plant hormone families.

Novel approach to supercritical fluid chromatography-mass spectrometry analysis of metal ions using EDTA complexation

BackgroundReliable methods enabling detection of metal ions, and especially heavy metals, in different matrices are necessary in various fields such as ecology, pharmaceuticals and toxicology. As some of the currently used methods suffer from spectral and chemical interferences, this study investigates the applicability of SFC-MS/MS for the determination of metal ions. ResultsEffective novel approaches for metal ion analysis using CO2-based mobile phase were developed using three ligands forming metal complexes. As metal-EDTA complexes are prepared by simple addition of EDTA to the solution containing metal ions, this approach to metal ion analysis does not require laborious synthesis and isolation of solid metal-complexes. Besides, two other approaches using diethyldithiocarbamate and acetylacetonate as ligands were compared. Metal complexes of Cu, Co, Cr, Fe, Al, Mn, and Zn with all 3 ligands were synthesized and their identity was confirmed by high-resolution mass spectrometry (HRMS). The suitability of the three developed UHPSFC-MS/MS methods was examined using the determination of calibration range and repeatability of injections. Moreover, the universality of the developed UHPSFC-MS/MS method for the determination of metal-EDTA complexes was proved by analyzing Ni, Bi and Pb as additional metal ions. Significance and noveltyThis study demonstrates the extended range of applicability for SFC based separations. For the first time, the possibility to analyze metal complexes with EDTA using a fast and reliable ultra-high performance supercritical fluid chromatography-tandem mass spectrometry (UHPSFC-MS/MS) method is reported. The three developed UHPSFC-MS/MS methods are able to separate DDC, acac, and EDTA complexes of various metals very efficiently (total cycle times of 5, 2, and 3 min, respectively). They offer a fast and green alternative to chromatographic methods commonly used for metal ion analysis.

Development of Simplified and Efficient Sample Preparation Methods for the Analysis of Problem Material within the Diesel Fuel Delivery System.

A new approach for the analysis of diesel engine fuel filters has been developed. This method involves minimal to no sample preparation, allowing rapid and unbiased analysis of diesel fuel filters. In recent years, diesel fuel filter plugging incidences have increased in parallel with changing emissions legislation. Fuel filter blockages can result in increased emissions, reduced efficiency, and engine failure. It is not fully understood why fuel filter blockages occur; as a result, there has been an international increase in research into the cause of fuel filter plugging. The method discussed in this paper utilizes a thermal desorption (TD) style sample introduction technique that can be used in conjunction with gas chromatography-mass spectrometry (GC-MS) and presents a fast, simple, and more sustainable approach to the analysis of fuel filters. When required, an efficient and straightforward sample cleanup process was developed and was used to simplify and improve confidence in the data identification and assignment; this method is up to three orders of magnitude faster than some procedures adopted in the literature. Further complementary analytical techniques, such as ultrahigh-performance supercritical fluid chromatography-mass spectrometry (UHPSFC-MS) and high-resolution GC-MS, were used to access additional sample-specific information. This new approach has been successful in the identification of problematic materials deposited on blocked fuel filters, concurrent with recent research. This information can aid in the development of mitigation strategies to combat fuel filter plugging.

Determination of amphetamine enantiomers in urine by conductive vial electromembrane extraction and ultra-high performance supercritical fluid chromatography tandem mass spectrometry.

Separation and quantification of amphetamine enantiomers are commonly used to distinguish between consumption of prescription amphetamine (mostly S-amphetamine) and illicit forms of the drug (racemate). In this study, electromembrane extraction with prototype conductive vials was combined with ultra-high performance supercritical fluid chromatography (UHPSFC-MS/MS) to quantify R- and S-amphetamine in urine. Amphetamine was extracted from 100 μL urine, diluted with 25 μL internal standard solution and 175 μL 130 mM formic acid, across a supported liquid membrane (SLM) consisting of 9μL of a 1:1(w/w) mixture of 2-nitrophenyloctyl ether (NPOE) and bis(2-ethylhexyl)phosphite (DEHPi) into an acceptor phase containing 300 μL 130 mM formic acid. The extraction was facilitated by the application of 30 V for 15 min. Enantiomeric separation was achieved using UHPSFC-MS/MS with a chiral stationary phase. The calibration range was 50-10,000 ng/mL for each enantiomer. The between-assay CV was ≤5%, within-assay CV ≤ 1.5%, and bias within ±2%. Recoveries were 83%-90% (CV ≤ 6%), and internal standard corrected matrix effects were 99-105 (CV ≤ 2%). The matrix effects ranged from 96% to 98% (CV ≤ 8%) when not corrected by the internal standard. The EME method was compared with a chiral routine method that employed liquid-liquid extraction (LLE) for sample preparation. Assay results were in agreement with the routine method, and the mean deviation between methods was 3%, ranging from -21% to 31%. Finally, sample preparation greenness was assessed using the AGREEprep tool, which resulted in a greenness score of 0.54 for conductive vial EME, opposed to 0.47 for semi-automated 96-well LLE.

Development and validation of ultra-high performance supercritical fluid chromatography method for quantitative determination of four target flavonoids components in citrus samples

AbstractA new method for the analysis of four target flavonoids in two kinds of citrus samples by ultra-high performance supercritical fluid chromatography (UHPSFC) method was developed. Main variables affecting the UHPSFC separation were optimized, and under the optimized conditions the four target compounds (tangeretin, nobiletin, hesperetin and naringenin) can be separated within 10 min. The UHPSFC method allowed the determination of the four target compounds in the diluted stock solutions with limit of detection (LOD) ranging from 1.08 to 2.28 μg mL−1, and limit of quantification (LOQ) ranging from 1.45 to 4.52 μg mL−1, respectively. The coefficients of determination (R2) of the calibration curves were higher than 0.9950. The recoveries of the four target compounds at three different concentrations were in the range of 82.4–117.6%. The validation results demonstrated that the proposed method is simple, accurate, time-saving and environment friendly, and it is applicable to a variety of complex samples such as medicine-food dual purpose herbs and functional foods.

Separation of pyrrolizidine alkaloids in different Senecio species using ultra-high performance supercritical fluid chromatography

Different Senecio species, especially S. inaequidens – a neophyte native to South Africa – have widely spread across Europe and now are found worldwide. The entire genus is known to contain toxic pyrrolizidine alkaloids (PAs), which renders them a possible health hazard to humans and livestock. As they can enter the food chain or occur as contaminants in herbal crops and phytopharmaceutical formulations (e.g. teas), efficient and straightforward assays for their qualitative and quantitative analysis are in high demand. Different techniques have been used for this purpose, most commonly HPLC or GC. As the analysis of PAs is a challenging task, alternative methodologies like ultra-high performance SFC (UHPSFC) may offer an additional benefit in terms of their separation efficiency and orthogonal selectivity. In this study an UHPSFC approach for the simultaneous determination of six PAs (free bases as well as N-oxides) is presented, which achieved the baseline separation of all standard compounds in seven min. Optimal separation was carried out in gradient mode on a Torus™ DEA column with 0.05% ammonia in methanol as modifier. The column temperature was 25 °C, ABPR 1900 psi and flow rate 1.1 mL/min, with a detection wavelength of 215 nm. The assay was validated and fulfilled all ICH criteria exhibiting good linearity (R2 ≥ 0.9994), precision (inter-day variance ≤ 3.67%, intra-day variance ≤ 3.92%) and recovery rates (96.3–104.1%), with detection limits typical for SFC-PDA (≤ 4.24 µg/mL). Furthermore, it could conveniently be coupled to MS-detection, which increased the sensitivity significantly. To confirm practical suitability of the method, different Senecio samples were analyzed, indicating a high qualitative as well as quantitative difference in their PA profile (e.g. total amounts of PA between 0.09 and 4.63 mg/g).

An accurate and reliable analytical strategy for simultaneous determination of target furanocoumarins and flavonoids in cosmetic and pharmaceutical samples by ultra-high performance supercritical fluid chromatography

Furanocoumarins and flavonoids have various important biological activities and wide application. In the present study, a rapid and reliable supercritical fluid chromatography method was proposed for the separation of 10 target components including 8 furanocoumarins and 2 flavonoids. After detailed condition optimization, the 10 target compounds can be baseline separated on a Trefoil CEL1 (3.0 mm × 150 mm, 2.5 µm) column using gradient elution. A 0.07% (v/v) trifluoroacetic acid in ethanol was determined to be the most proper mobile phase for the separation of target compounds. The column temperature, back pressure, flow rate were set at 36 ℃, 2000 psi, 1.0 mL min−1 to 1.4 mL min−1, respectively. The ten target compounds were analyzed within 24 min using the optimized conditions. Under the optimized conditions, all the target compounds showed good linearity with linear correlation coefficients higher than 0.995, and satisfactory recovery in the range of 83.52–112.92%. All these results showed that the developed ultra-high performance supercritical fluid chromatography method was reliable and effective. Finally, the application of the developed method to cosmetic, Psoraleae fructus and Angelicae dahuricae radix samples were presented. The results highlight the applicability of the ultra-high performance supercritical fluid chromatography method to the analysis of interested compounds in pharmaceutical and cosmetic samples.

Ultra-high-performance supercritical fluid chromatography-mass spectrometry for the analysis of organic contaminants in sediments.

A nontarget screening method was developed based on D-optimal designs for ultra-high performance supercritical fluid chromatography with positive and negative electrospray ionization mode mass spectrometry. A mixture of organic contaminants such as pesticides, steroids, surfactants, phenolic and fatty acids, and polycyclic aromatic hydrocarbon derivatives, was used for the optimization. An aprotic mixture of dichloromethane and acetone [3:1] performed overall best as the injection solvent. The highest peak capacities (n) were accomplished at the shallowest gradient (1%B/min), ammonium formate (n = 378 in negative ionization mode), or ammonium acetate (n = 327in positive ionization mode) in methanol as the modifier. Capillary voltage, make-up solvent flow rate, water, and additive concentration were the most significant factors for improving peak intensity: higher peak intensities were obtained at lower additive concentrations (5mM ammonium formate), and with 5% water in positive ionization mode. Conversely, water had detrimental effects in negative ionization mode. The optimized method was used to quantify organic contaminants in 17 freshwater sediment samples from Copenhagen, Denmark. Out of 50 monitored contaminants, 35 were detected in at least one sample. Further, the method has a potential for target and nontarget screening analysis of organic contaminants in solid matrices.

Ultra-high performance supercritical fluid chromatography-tandem mass spectrometry method for simultaneous determination of atorvastatin, 2-hydroxy atorvastatin, and tangeretin in rat plasma and its application to the pharmacokinetic study.

Recent studies strongly suggest that atorvastatin combination therapy with tangeretin could be beneficial in the treatment of hyperlipidemia. This study aimed to investigate the pharmacokinetic interactions among atorvastatin, its active metabolite 2-hydroxy atorvastatin, and tangeretin after oral administration of atorvastatin with tangeretin in rats. A rapid, selective, and sensitive assay was developed and validated based on ultra-high performance supercritical fluid chromatography-tandem mass spectrometry for the simultaneous measurement of atorvastatin, 2-hydroxy atorvastatin, and tangeretin concentrations in rat plasma. Chromatographic separation of the analytes was conducted on an ACQUITY Torus 1-AA column in gradient elution mode. The mass transition ion pairs were m/z 559.0→440.0 for atorvastatin, m/z 575.2→440.0 for 2-hydroxy atorvastatin, m/z 373.0→358.1 for tangeretin, and m/z 254.8→136.7 for daidzein (internal standard). Calibration curves showed good linear correlations at the following concentration range: 1-400 (r = 0.9952), 1-400 (r = 0.9980), and 3-1200 (r = 0.9945) for atorvastatin, 2-hydroxy atorvastatin, and tangeretin, respectively. The method was fully validated and satisfied the acceptance criteria recommended by the United States Food and Drug Administration. Finally, it was successfully applied in a pharmacokinetic study in rats to evaluate the pharmacokinetic behavior of atorvastatin, 2-hydroxy atorvastatin, and tangeretin.

Supercritical fluids in analysis of cannabinoids in various Cannabis products

We developed a fast, selective, and sensitive method for the determination of various neutral and acidic phytocannabinoids with an emphasis on the separation of structurally related compounds. Optimized ultra-high performance supercritical fluid chromatography (UHPSFC) allowed the separation of 2 groups of structural isomers, including isomers of m/z 357: cannabidiolic and Δ9-tetrahydrocannabinolic acid, and isomers of m/z 315: cannabichromene, Δ9-tetrahydrocannabinol, Δ8-tetrahydrocannabinol, cannabicyclol, and cannabidiol only in mere 3.5 min followed by 1.5 min equlibration. The 2-ethylpyridine functionalized stationary phase and gradient elution using mobile phase comprising carbon dioxide and methanol: acetonitrile (25:75) + 5% water mixture were selected after the optimization. Tandem mass spectrometry (MS/MS) with electrospray ionization in positive and negative modes with methanol + 5% water as a make-up solvent provided adequate selectivity and sensitivity needed for analysis of phytocannabinoids in complex matrices. The limits of quantification were in the range 0.01–0.5 ng/mL for most of the monitored cannabinoids. The optimized UHPSFC-MS/MS method was then used for the determination of cannabinoids in various products, such as dietary supplements, nutraceuticals, and cosmetics. Solvent extraction methods were optimized for the cosmetic and nutraceutical products with the accuracy in the range 80.4–120.6% and precision 0.5–18.9%. To extract cannabinoids from the herbal infusion matrix, supercritical fluid extraction (SFE) and pressurized liquid extraction (PLE) methods were developed using environmentally friendly solvents water, ethanol, and carbon dioxide. The detailed optimization of extraction solvent composition, temperature, and pressure was carried out with the emphasis on avoiding the thermal degradation of cannabinoids. Optimized SFE and PLE methods were compared and applied to different herbal infusions to confirm declared cannabinoids content.

Optimization and validation of a fast supercritical fluid chromatography tandem mass spectrometry method for the quantitative determination of a large set of PFASs in food matrices and human milk

An Ultra-High Performance Supercritical Fluid Chromatography coupled with tandem Mass Spectrometry analytical method (UHPSFC-MS/MS) was developed for the determination of 34 perfluoroalkylated substances (PFASs) in food-related matrices. Two parameters (i.e. stationary phase and co-solvent) were selected and optimized using a step-by-step method, while a design of experiment (DoE) method using a central composite design (CCD) was implemented to optimize column temperature, mobile phase flow rate, co-solvent concentration and automated back pressure regulator (ABPR). The Torus 2-PIC column was selected along with ammonium acetate AcoNH4 as additive in the co-solvent. DoE optimization of both peak width and resolution enabled validating an optimized model (desirability 0.613) and setting column temperature at 38.7 °C, AcoNH4 concentration at 8 mM, mobile phase flow rate of 1.9 mL/min and ABPR at 1654 psi. The validated resulting method enabled reaching limits of quantification below 0.2 ng/g (w.w.) for 97 % PFASs in accordance with current EU requirements. The strategy was successfully applied to the characterization of a range (n > 30) of food-related matrices (red meat, poultry meat, eggs, fish and breast milk) collected in Algeria in 2019. PFOA and PFBA were observed as the most frequently detected PFASs, i.e. in 96.96 % and 90.9 % of the samples respectively. The highest concentrations were determined in fishery products up to 4.42 ng/g (w.w.) for PFTeDA and 0.75 ng/g (w.w.) for PFOS.