Ultra Strength Research Articles

Tough Supramolecular Hydrogels Crafted via Lignin-Induced Self-Assembly.

Supramolecular hydrogels are typically assembled through weak non-covalent interactions, posing a significant challenge in achieving ultra strength. Developing a higher strength based on molecular/nanoscale engineering concepts is a potential improvement strategy. Herein, a super-tough supramolecular hydrogel is assembled by gradually diffusing lignosulfonate sodium (LS) into a polyvinyl alcohol (PVA) solution. Both simulations and analytical results indicate that the assembly and subsequent enhancement of the crosslinked network are primarily attributed to LS-induced formation and gradual densification of strong crystalline domains within the hydrogel. The optimized hydrogel exhibits impressive mechanical properties with tensile strength of ≈20MPa, Young's modulus of ≈14MPa, and toughness of ≈50MJm⁻3, making it the strongest lignin-PVA/polymer hydrogel known so far. Moreover, LS provides the supramolecular hydrogel with excellent low-temperature stability (<-60°C), antibacterial, and UV-blocking capability (≈100%). Interestingly, the diffusion ability of LS is demonstrated for self-restructuring damaged supramolecular hydrogel, achieving 3D patterning on hydrogel surfaces, and enhancing the local strength of the freeze-thaw PVA hydrogel. The goal is to foster a versatile hydrogel platform by combining eco-friendly LS with biocompatible PVA, paving the way for innovation and interdisciplinarity in biomedicine, engineering materials, and forestry science.

A rapid and effective method for alloy materials design via sample data transfer machine learning

One of the challenges in material design is to rapidly develop new materials or improve the performance of materials by utilizing the data and knowledge of existing materials. Here, a rapid and effective method of alloy material design via data transfer learning is proposed to efficiently design new alloys using existing data. A new type of aluminum alloy (E2 alloy) with ultra strength and high toughness previously developed by the authors is used as an example. An optimal three-stage solution-aging treatment process (T66R) was efficiently designed transferring 1053 pieces of process-property relationship data of existing AA7xxx commercial aluminum alloys. It realizes the substantial improvement of strength and plasticity of E2 alloy simultaneously, which is of great significance for lightweight of high-end equipment. Meanwhile, the microstructure analysis clarifies the mechanism of alloy performance improvement. This study shows that transferring the existing alloy data is an effective method to design new alloys.

Development of Ultra Strength Concrete

Most superior cements delivered today contain materials notwithstanding Portland cement to help accomplish the compressive strength or solidness execution. These materials include fly ash, silica fume and ground-granulated blast furnace slag used discretely or in coalescence. Concurrently, chemical admixtures such as high-range di-hydrogen monoxide-reducers are needed to ascertain that the concrete is facile to convey, place and culminate. For high-strength cements, a blend of mineral and compound admixtures is almost consistently fundamental to guarantee accomplishment of the necessary strength. The Primer investigations have been done on concrete, Fine aggregate and coarse aggregate. The Blend Extent for M200 grade concrete is determined 1: 0.313: 1.463 by following the plan methodology given by ACI Strategy. By keeping up the w/c proportion as 0.25, the multi day Compressive strength, Flexural strength and Split elasticity of cement at 3% of silica fume and 1.5% of conplast have been accomplished as 163.33 N/mm2, 8.4 N/mm2& 9.5 N/mm2 separately. The variety of solidarity of cement with the variety of silica fume is appeared in bar outline. The strength of the concrete might be as yet expanded by decreasing the w/c proportion and expanding the level of silica fume

Research on Sand Gradation to Ultra Strength Grouting Material Properties

The gradation of coarse sand, medium sand and fine sand on fluidity initial, final setting time, flexural strength, compressive strength, and other properties and structure, of ultra early strength grouting material, was explored. The quartz sand gradation of cement sand ratio 1.0 was systematically studied. The results showed that, the coarse sand, medium sand and fine sand mixed according to the reasonable distribution, when glue sand ratio was 1.0-1.5, ultra-early-strength grouting material, with final setting time for 50-60(min), the initial fluidity greater than 320(mm), 0.5h fluidity greater than 280(mm), 2h compressive strength of 35.6(MPa), 1d flexural strength greater than 13(MPa), 28d compressive strength over 93(MPa), achieved the free vibration.

Support vector regression based models to predict fracture characteristics of high strength and ultra high strength concrete beams

This paper examines the applicability of support vector machine (SVM) based regression to predict fracture characteristics and failure load (Pmax) of high strength and ultra high strength concrete beams. Characterization of mix and testing of beams of high strength and ultra strength concrete have been described briefly. Methodologies for evaluation of fracture energy, critical stress intensity factor and critical crack tip opening displacement have been outlined. Support Vector Regression (SVR) is the extension of SVMs to solve regression and prediction problems. The main characteristics of SVR includes minimizing the observed training error, attempts to minimize the generalized error bound so as to achieve generalized performance. Four Support Vector Regression (SVR) models have been developed using MATLAB software for training and prediction of fracture characteristics. It is observed that the predicted values from the SVR models are in good agreement with those of the experimental values.

Effect of Sour Environment pH on Crack Morphology in Ultra Strength Drilling Steel under Cyclic Stress

not Available.

A randomized, placebo-controlled double-blinded comparative clinical study of five over-the-counter non-pharmacological topical analgesics for myofascial pain: single session findings

ObjectivesTo investigate the effects of topical agents for the treatment of Myofascial Pain Syndrome (MPS) and Myofascial Trigger Point (MTRP).MethodsSubjects with an identifiable trigger point in the trapezius muscle, age 18-80 were recruited for a single-session randomized, placebo-blinded clinical study. Baseline measurements of trapezius muscle pressure pain threshold (PPT: by pressure algometer) along with right and left cervical lateral flexion (rangiometer) were obtained by a blinded examiner. An assessor blinded to the outcomes assessments applied one of 6 topical formulations which had been placed in identical plastic containers. Five of these topicals were proposed active formulations; the control group was given a non-active formulation (PLA). Five minutes after the application of the formula the outcome measures were re-tested. Data were analyzed with a 5-way ANOVA and Holms-adjusted t-tests with an alpha level of 0.05.Results120 subjects were entered into the study (63 females; ages 16-82); 20 subjects randomly allocated into each group. The pre- and post-treatment results for pressure threshold did show significant intra-group increases for the Ben-Gay Ultra Strength Muscle Pain Ointment (BG), the Professional Therapy MuscleCare Roll-on (PTMC roll-on) and Motion Medicine Cream (MM) with an increased threshold of 0.5 kg/cm2 (+/-0.15), 0.72 kg/cm2 (+/-0.17) and 0.47 Kg/cm2 (+/-0.19) respectively. With respect to the inter-group comparisons, PTMC roll-on showed significant increases in pressure threshold compared with Placebo (PLA) (p = 0.002) and Icy Hot Extra Strength Cream (IH) (p = 0.006). In addition, BG demonstrated significant increases in pressure threshold compared with PLA (p = 0.0003).ConclusionsWith regards to pressure threshold, PTMC roll-on, BG and MM showed significant increases in pain threshold tolerance after a short-term application on a trigger points located in the trapezius muscle. PTMC roll-on and BG were both shown to be superior vs placebo while PTMC was also shown to be superior to IH in patients with trigger points located in the trapezius muscle on a single application.CMCC Research Ethics Board Approval # 1012X01, 2011

Surface Studies of Ultra Strength Drilling Steel after Corrosion Fatigue in Simulated Sour Environment

not Available.

Study on Ultra-Strength Mortar Prepared with Mineral Admixture

In this paper, preparation, property study of ultra-strength mortars with mineral admixture and clear river sand was carried out. The mineral admixture include fly ash, ultra-fine GGBS and silica fume. The experimental results show that the compressive strength of mortar improves with increasing amount of silica fume or ultra-fine GGBS. When the content of silica fume or ultra-fine GGBS is 30~35%, the compressive strength and flexural strength of mortar in curing age of 7 days are 100 MPa and 20MPa, respectively. But strength of mortar decreases with the increase replacement rate of fly ash. When the mortar mixes with combined of silica fume and ultra-fine GGBS, the optimum proportion of siliaca fume to ultra-fine GGBS is 2:3. And the compressive strength of mortar in curing age of 7 days is 75~100MPa when the mixed mineral admixture is 40~60%. The compressive strength of mortar is about 90MPa as it mix 60% of cement, 15% of silica fume, 15% of GGBS and 10% of fly ash. Moreover, the ultra strength mortar refines its pore structure and its capiliary pore (≥100nm) amount reduces by 78% compared to ordinary mortar.

Mechanics of Ultra-Strength Materials

AbstractRecent experiments on nanoscale materials, including nanowires, nanopillars, nanoparticles, nanolayers, and nanocrystals, have revealed a host of “ultra-strength” phenomena, defined by stresses in the material generally rising up to a significant fraction of the ideal strength—the highest achievable strength of a defect-free crystal. This article presents an overview of the strength-controlling deformation mechanisms and related mechanics models in ultra-strength nanoscale materials. The critical role of the activation volume is highlighted in understanding the deformation mechanisms, as well as the size, temperature, and strain rate dependence of ultra strength.